How to Replace a Dixell Digital Temperature controller.

How to Replace a Dixell digital temperature control. freezer. refrigerator. xr10c , xr10cx , xr110c , xr02cx , xr20c , xr20cx , xr120c , xr03cx , xr30cx , xr04cx , xr40cx , xr06cx , xr60c , xr60c-5n1F2.
Please Share My Video's on Facebook and any other Social media
sites with Links to My Video's.
Serving--- All of Orange County , California. Since 1981.
Commercial Refrigeration, Commercial and Residential Air Conditioning Service.
Please Share My Video's on Facebook and any other Social media sites with Links to My Video's.
Stealing the Actual Video by Uploading or Downloading is Prohibited.
Removing the Watermark or altering the Video in any way is Not Allowed and is a Violation of Law.
All Video's On this YOUTube Page OcRefrigeration & H.V.A.C. are the Property Of OcRefrigeration.com. No Video's Can be Used Commercially without my Express Writen Permission or Without the Express Written Consent of OcRefrigeration.com . All Video's are Copyrighted.

[@sherwinalvarez7365]

Really great video. Very informative.

[@OcRefrig]

Glad it was helpful!

[@javiergutierrez5324]

Really hard the first time to do the configurations but after that. Really easy. Dixell Tech support really nice guys 👍👍👍👍

[@OcRefrig]

👍. This is a " Universal " Dixell. Just select the type of unit u are installing it on and No Programming needed. its not like the old controller that u have to program everything. soo nice. 1 Button select , for a Freezer or refrig & away u go. rock & roll. soo nice.

[@josemartinez-jt6tw]

@@OcRefrigseems like the wiring is always different t though

[@JRMny-nl4ut]

Helpful, thanks. I see a bar code in the lower right corner of the second page for the full manual. My question is how to add or lengthen defrost. Or, even how to tell what the current defrost setting are? If the full manual is down loaded, will the above info be included in this down load? Guess I'll try it.

[@OcRefrig]

👍

[@dennisnoone7427]

Nice 👍 , maybe I ll try one of them someday

[@OcRefrig]

thanks. What are you using right now when u replace a dixell ?

[@dennisnoone7427]

@@OcRefrighaven't run in one yet, mostly do hvac, and few ref calls ones in a while

[@OcRefrig]

Yea, im just starting to see them all fail now. they have finally been out for more than 10 years now.

[@harrydickson4575]

Another thumbs up 👍👍 ps whatever happened with the ink bird controller

[@OcRefrig]

i Just haven't found the right job for it yet. The inkbird is a simple controller ( On or off at temperature only with compressor short cycle protection / a simple switch ) that can only be used on refrigerators or Liquid line solenoid control. it has " No Electric Defrost " capability 😞. This Was a Freezer application , so Had to use a Controller with Electric defrost capability. ive had no Refrigerator controllers fail lately , so its still on the truck. i might have a job for it next week where i need to replace a temp control for a liquid line solenoid that controls a small evaporator on a cooks line pass out cooler. its possible i might use it there.

[@gene-khvacr]

Got 2 of your inkbird still sitting in the van got to read up hope I can use it on refrigeration w/o def in place of dixell🤔

[@harrydickson4575]

OcRefrigeration , Hvac & Electrical Video's. That would make a great video I had good luck with this controller for a freezer with Defrost it also comes in a 220 V Elitech EK-3030E 110V Temperature Controller Thermostat Control System Heating

[@OcRefrig]

@ gene --- i don't see why u couldn't. the ink bird use ntc probes just like dixell or carel. i stole the inkbird probe to replace a failed carel probe last week. worked great.

[@OcRefrig]

@ Genek --- only difference is inkbird relay is light duty. i recommend use a true relay or contactor with it. only rated for 10 amps max. if only controlling a solenoid no big deal , but a compressor id use a relay or contactor.

[@AVR-hf1rl]

Good afternoon having an issue with an xr60c trying to change the FC from oy to on for a freezer any idea what im doing wrong when I hit the up key i think it's cl that comes up thanks for your time

[@leylyatl1049]

Could you help me please, how to set up US LS Hy and other if controller dixell is installed on the storage boiler and I want to have permanent hot water around 50-55°C ?

[@anselmoleon5763]

I’m still trying to figure out how get to the second set of parameters to switch it to hot gas defrost?

[@jesusvargas2096]

hola buenas tardes saludos para todos los colegas espero se encuentren bien les quería pedir el favor de ayudarme con tutorial en español del manejo de los parámetros de dixell xr60cx

[@OcRefrig]

I Don’t speak Spanish sorry.