October 6, 2018/401 Install of Right Weigh Load Scale on 2018 Utility Reefer Trailer

LongHaul Larry P.O. Box 92 St.Cloud, WI. 53079
[e-mail]

[@chuckychuck]

You're a generalist, a polymath, a renaissance person, a multi-potential, or whatever you call yourself they need you.

[@cecildavisson9401]

Larry, An old pipe fitters trick, start the fitting just one thread then paint the teflon paste on and you eliminate the paste getting inside the tube and gumming up the works. Those compression fittings are called "nut and ferrel tube fittings". Some of these fittings have a washer like ring that allows the ferrel to not turn when you tighten the nut to finger tight plus one and a quarter turns.(1/4 Tube) Guaranteed not to leak. If you tighten them tighter they will cut the tube or deform the coupling surfaces and they will leak, of course the will leak if they are not tight enough.

[@davetate2932]

When i owned the trucks id have paid double to have a Driver like you Larry. You have the nack to fix about anything the trucks needed and would sure save a company a lot of money ,and down time waiting on a service person or shop love seeing you do it as well thank you sir

[@shctbbe]

Up

[@timgear9892]

Good Weigh gauge install video Larry. A very practical use of a piece of cardboard also. I've never seen an air bag axle lock before. Thanks for the explanation of that device, and over all excellent video. Two thumbs up on this one.👍👍

[@dondaughtry6385]

Good job, wish I could have found drivers like you back in the day, should give you a reward. Keep on keeping on

[@rickt4552]

Excellent instructional and information vid ...would love to see more plz ...

[@petermurrell5221]

Your a very good mechanic. Great video 👏🔥💯👍

[@matthewgutierrez6986]

Every day you learn something new from Uncle Larry, Great job and stay safe out there.

[@bluemule534]

Good Job Larry,Thanks for taking us along.I learn something all the time from you.

[@glennhunter7018]

Good video Again good job put it on you always do good work you are a good mechanic be safe on the road my friend

[@retireddriver16]

Larry taking care of ADL boss equipment very nice 👍

[@waylonwolfe627]

Hello Mr Larry that was pretty easy to install I bet Mr John could even do it to 😆😆😆 hope you are having a great day or night and having a great weekend to be safe out there on time travels until next time GOD BLESS YOU from Paris Texas

[@timgear9892]

Hahahaha! No, Larry doesn't use crescent wrenches, not John's way!

[@waylonwolfe627]

tim gear yeah but he had one handy 😆😆😆😆

[@ernestdougherty3162]

Great job on installing that weight system Larry boss is lucky to have somebody like you in his fleet be safe

[@fullofship1828]

Rumor has it john was there guiding you........

[@kens.3729]

You make everything look simple and a number of folks who are handy with tools could install a device like this. A great savings to install this device and you can immediately get the weight of a load and save the time and effort to CAT Scale a load. A Great Investment. I can see Boss Man asking you to install these on more of his Trailers and it’s obvious you’re a very competent mechanic and a highly skilled driver. Thanks!

[@markminton8974]

Your a Smart Guy Larry..

[@kenflodstrom]

Nice Job Long Haul Larry Teacher Good Day Take Care Thank You

[@doriswalker7492]

Hi Larry have a great day from westmlnster MD

[@dkhumphrey5713]

Very informative. Your description of the install is easy to follow. Great job.

[@Jesse-le9bh]

Thanks Larry for the detailed explanation of the install. Very nice job. I can tell that you like wrenching and you are really good at it. Blessings

[@sylviawald1174]

Welcome to LHL Mechanics 101! As always, great video Larry. Have a good, safe day 😄

[@lr937]

Great video, a must have for truckers getting loads over 30,000 takes the guessing out of the equation

[@hungary191296]

Great video Larry.

[@normangallant9879]

Good job Larry

[@takitimu]

Good job LHL your boss is extremely lucky to have skilled employee's 👍

[@stevegarcia5106]

Great video Larry. Job well done on that install and noticing a problem before it becomes a problem where that hose would be rubbing against metal. Safe travels brother.

[@barb9124]

another very interesting video.....you make it look so easy, through many years of doing it.

[@LongHaulLarry]

Thanks

[@Roadhogg24]

Great video Larry That was very cool, pat yourself on the back, you’ve done well young man!!! Keep’em coming Larry!!!👍😎

[@agnaldos80]

Hi Larry you did a beautiful job should be a teacher because he told everybody exactly what to do and you have a wonderful day I myself start driving in 1972 and also did mechanic for me ,,,you do know what you doing enjoy yourself

[@zizanokisting573]

Hi there mr larry good job you make everyting luk so simple.you know your way around a truck hope bossman takes good care of you as you do to him stay safe out there blessings.

[@LongHaulLarry]

👍

[@darrenbellefontaine1130]

Another great video Larry thanks for the info.

[@connork5339]

Good call on the pipe goop. Respect for not using Teflon tape. Respect for owning a Dewalt drill.

[@red508]

Maybe on your next 30 min brake you could show us how to change the injectors on big blue. You'll still have about 10-12 min to have some coffee then be on your way. One of a kind, Boss is lucky to have you working for him saved him how much ?

[@edwardmartinez199]

Again thank JBG John for getting uncle Larry.

[@ciaranmcmanus3840]

Larry you are worth your Weight in gold my friend

[@LongHaulLarry]

Thanks

[@georgeatatlasair8560]

Great job great Larry enjoy watching the video !!!

[@96chevydually6.5L]

Nice work Larry

[@wb6she]

Good Job Larry, thanks for sharing that..

[@MrStingray186]

Tks Larry Great video.... I was wondering about this Scale now I know tks

[@laborops]

Your Videos are very well done and very interesting.

[@edwardmartinez199]

Little John the wonder chicken is on the camera.

[@anthonyklein1879]

Oh my gosh I love that voiced you used 🤣🤣🤣🤣🤣

[@anthonyklein1879]

Damn You Larry lol every time I see a truck on the highway, I am looking at the trailer to see if it has a weight scale on it..

[@danachappell3861]

What a lot of piddling you had to do to get that scale on. I know it won't hold up in court, but it does give you a good idea of how much you have on the trailer, so you can adjust things, or leave them alone. It is peace of mind for you guys, and I like that. Have a great trip to the yard. lol Laterz!!! 🐸🐸🐔🐔🤭🤭🐸🐸

[@anthonyboylin4220]

Great video Larry,Really interesting.👍🇬🇧

[@brandonguillory242]

great video sir

[@richorourke7872]

Very informative thanks larry

[@artj7676]

Excellent video Larry! Great install, and it even works good. Your the fix it man. Like they say, Jack of all trades, and master of none! LOL

[@norskmn]

Hi Larry! Nice install!~. Safe travels.

[@billyday6387]

Great video

[@leupold4089]

Hi Larry, nice job on the load scale, I don't like Teflon tape much, prefer Teflon pipe dope like you used, seems to work better. Keep it safe!!!

[@otrecho]

beautiful job.

[@CALLtheMECHANICS43]

Great videos be safe on the roads

[@georgegohr1767]

another job well done larry, be safe brother

[@jackskelton6773]

Larry,Your handier than a pocket on a T SHIRT!!!! LOL!!! Be safe my friend 👍👍👍👍

[@robertschumacher8713]

Larry Very interesting Thank you

[@LongHaulLarry]

Thanks

[@markminton8974]

Larry , you need one of those Creepers so you can roll around under there Man.. Keep it in your Sleeper..

[@reneolivares7769]

Thank you sir. Your the man.

[@wheelerbradley]

Another great job. The boss man better appreciate your skills 👍🏻😃🇺🇸🇺🇸🇺🇸🇺🇸

[@LongHaulLarry]

Thanks

[@tazmun]

I think John has that other trailer with this system on that you're talking about. He's also having issues with it and I think it needs calibrated because with a load he's got on it right now it seems to be about a thousand pounds off. Either that or he needs to have a long talk with you and isn't using it correctly.

[@plumbawl5977]

"Excellent, Smithers!"

[@markminton8974]

Good Vid , Larry. Enjoyed it Man..

[@moparnation9116]

Boss man loves you

[@ToniWhitneyDesign]

Great job! Good info. Appreciate the info.

[@michaelhyde-parker6344]

great job Larry

[@LongHaulLarry]

Thanks

[@dermdeworm6812]

A master at work, 👍👍🇵🇪🐕

[@blackjack8142]

Very interesting video. Thanks

[@ciaranmcmanus3840]

it is great to have Mechanical Knowledge

[@LongHaulLarry]

Yep

[@dewhalin]

Thank you Larry

[@LongHaulLarry]

Thanks

[@stillanoldman]

I have used this before. Nice! I want to see JBG install one of these.

[@WearySteerer]

Larry be good. 👍

[@LongHaulLarry]

👍

[@lr937]

It helps to make sire you are not overweight and to keep the load balance on all axles, you have to calibrate it about every six months , it gives u peace of mind, u can see what the weigh is before having to drive 40 or more miles to a cat scale and then to drive back cause they over load you, getting me one. For my truck and my trailer

[@KB-gs8zi]

Sir ""UNCLE "" Larry !! Thanks for another great video !! Keep going !!!! Don't stop nows as getting very interesting !!! Did you fix the train horns ?????? KEEP IT SAFE !!!!

[@myckee]

Great job.

[@LongHaulLarry]

Thanks

[@juergensbr4612]

Exterior mechanical? 🤦 hmm no Bluetooth possibility : a little bit old fashioned imho lol 🤦 btw nice job 👏

[@jimluff7520]

Thanks, I was wondering how they worked. I see JBG using it all the time.

[@LongHaulLarry]

👍

[@Howard1939]

Prime has these on most of their newer trailers, Instructions tell how to calibrate them.

[@WorldPremiere2018]

Thanks for the video I be putting one on next month Did you do a video for the one in the tractor?????

[@davetate2932]

Cool chipmunk speed reading just like Ivan did so long ago lmao.

[@GuriSingh-qb3ko]

Nice job

[@grilledmortal4096]

You a member of the pipe dope republic and the silicone republic as well I suspect. If people want to steal stuff even truck batteries they will. Lots of stories there. Excellent work in and below truck LHL.

[@leterfly]

Nice 👍👍

[@georgejuarez4565]

You make look uncle Larry easy 😞😞😞

[@edcorbin8576]

Larry did Alvin help you install the scale ??🤭

[@carychurchill733]

Larry, great video. I remember wondering what those levers at the back of the trailer were for. never got around to asking another driver or shop guy. Now i know. With these levers do you still pull your trl air. Guys at my company were telling me that I should never pull my trl break cause the trailer settles and makes life hell for the forklift guys. However I seem to remember during my training (with another company) that I should always set my trl brakes. Am I losing my mind ?

[@LongHaulLarry]

Set your trailer brakes

[@HansraRulez]

Yeah even I don’t know what these things are for. But definitely nice thing to know. Thanks Larry.

[@kmcgee552]

Are you going to get the other new truck?

[@LongHaulLarry]

Nope

[@odairtaveira5675]

How about the weight of the truck how you would know if are not overnight on truck? Would please explain that?

[@nabilmarsheh8731]

Can this scale be installed on drives?

[@stovebolt448]

Larry could you re-read that warranty info again,I got all of it except the last part when your voice seemed to slow down for some strange reason........gads do I feel like a super old fart, with all the wiz-bang gadgets that you have on a trailer these days...whew............Great video.....keeps an old guy like me on my toes......take care........see ya

[@sampatterson9176]

How much was the ADL creeper.

[@gord2358]

I hope Bossman gives you some cream-puff trips in consideration of your time because while you're pulling wrenches you're not making paid miles.(Bossman, take note)

[@peterubis5890]

Larry your getting all these great comments i don't want you to get a big head you camera was upside down I hope you don't install it that way : -)

[@markminton8974]

You know a Truck from top to bottom don't you Pal..

[@boatmans78]

wow we get it put that baby on

[@steveurbach3093]

I looked up the price. (trailer) Analog scale w/kit $300

[@tichdaddy1]

Nice work on the install Larry. You up for installing that on let’s say about 2000 trailers that I I know of personally? 😄

[@LongHaulLarry]

😮

[@tichdaddy1]

Exactly! I sure coulda used that thing today. Long story, I’ll just leave it at that...

[@amusinov23]

Never stop in OHIO Rest Area, NEVER!!! That is DOT property and they can check your papers and truck any time еven if you sleep.

[@LadyMarie880]

It would be cool if it would also be part of an app for the phone, as well.

[@LongHaulLarry]

They have a digital version that you can download an app and read it by your phone

[@edwardmartinez199]

Greetings sir Larry of Wisconsin Noble ADL Warrior night. ADL truck and trailer is in business a subsidiary of ADL transport.

[@chickenpermission]

You went on duty when you worked on your truck?

[@LongHaulLarry]

That’s my leisure time

[@chickenpermission]

@@LongHaulLarry haha, if you enjoy it you ain't working :)

[@johnm5855]

How much is it

[@chuckbrown7570]

My god that was painful

[@jdal1105]

I actually had one of these stolen on one of the boss's trailers!

[@JCaddy007]

They must be small thieves- big thieves rob banks