Official Beretta 92A1/96A1 Review

[@Banshee6911]

I own a 96A1 and absolutely love it have put thousands of rounds through it without a problem. Trijicon bright and tough night sights Houge wraparound grip. I recommend this pistol to anyone interested I am considering buying a 92A1 just to have another.

[@enzowarren9832]

Just bought a brand new one today! It’s my first firearm purchase. I absolutely love it. Couldn’t be happier!

[@SocialNetworkWhore]

I drooled watching this. I can not wait to get my hands on one of the 96A1. I love the classic models, but the upgrades they've made plus the fact that i can get it in .40 makes me want one so bad.

[@Millerman0583]

I bought the beretta 96 A1 about 3 months ago and put 500 rounds through with out a single problem. I have several other hand guns but I have to say the beretta 96 A1 is by far the one I trust the most use for it's safety and accuracy. I would recommend the pistol to anyone looking to buy a pistol.

[@bobbyricigliano2799]

I shot the M9 in the military and was issued a 92FS in the Police Academy 15+ years ago. Some of the military M9's weren't maintained very well and had issues, but my issued 92FS which I have been sole possession of has been a flawless pistol. Many thousands of rounds through it, including reloads and underpowered range ammo with no issues. I have since added another 92FS, a 92FS Inox, an M9A1, and two 92A1's. I am not a fan of the plastic mag release and guide rod, so those get swapped out just on personal preference. All of the above pistols are just boringly reliable and I'd carry any of them into harm's way without a doubt.

[@Kemosabe19511]

Ben, this is a very nice quick review of the new Beretta 92A1. I just have to get one of these soon! I've got an old 92S model that I bought new in 1981 and have quite a few rounds through it. My old eyes are starting to have trouble with those old sights and I'm looking forward to the new model and modern sights. Thanks for the nice review!

[@BerettaCommunity]

We no longer manufacture the 96 in inox, but the hammer is the same as the 92, and we have a kit that will work for the 92 and 96.

[@VisualMaelStrom]

This is my first pistol and I have had it for a week. I love it. 270 rounds through it with no problems.

[@BerettaCommunity]

@Madison1911R1 Neos - Unfortunately, no. The Neos magazine release is only designed to be release by the trigger finger on the upper right side of the frame. 96A1 - The buffer in the 92/96A1 frame is actually aluminum.

[@TheXtro101]

I too had a Beretta t-shirt bought at my county's gunshow back 10 years ago.It was grey color with the 92FS model on the back & bottom caption reads:"The choice of professionals"

[@markallen557]

This is a bummer for me and all the lovers of this weapon. Along with new version I still shoot my old 96 with no problems. It just fits my hand like a glove. Excellent gun; don't ever discontinue them please.

[@762x51n8o]

I love the 92/M9. My favorite pistol ever. It was by my side for 11 years in the Marines

[@BerettaCommunity]

Hey... sorry to hear you're having problems. It's certainly a very unique issue, but it really doesn't matter, when it's your gun. Let me know if you want us to take a look at it, or if you just want to return it to Scheels.

[@Wabbit1961]

Picked it up on the way home from work at my local shop. Called ahead because I get out after they close. They live next to the shop and said come on by. Wow. Inspected the gun.... Mmmmmmmmmm... Tasty. I'll test it this weekend. I don't find the double-action hard at all. Nice balance. Smooth pull.

[@BerettaCommunity]

@samfisherskiller If you are referring to the 40SW in white etched in the top portion of the barrel, this is something you can do to customize your gun. Simply take a white crayola crayon or a ceramic marker and paint it in! Ben likes his that way...

[@BerettaCommunity]

Thank you! There are no immediate plans for an Inox 96A1 but I'll pass it on to R&D

[@Scorpitect]

Great overview. I just picked up my 92A1, in 9mm, up yesterday and I'm very much looking forward to getting it out on the range and then finding some accessories for it! Very elegant piece of design.

[@drewyoung471]

just bought a 92a1 yesterday and shot off over 400 rounds.. i love this handgun..

[@pinscherpower1]

I just purchased a new 96a1 and I'm letting you know I'm taking it back. Thank god I got it from Scheels, they have a great return policy. Other wise my new pistol would have to get repaired. The problem is FTF the first round with bran-new ammo. The brass is catching on the 7oclock and 8oclock position, putting half moon marks right above the feed ramp before it enters the chamber. After removing the slide it is showing heavy wear on the left frame rail. Same side as the brass marks.

[@BerettaCommunity]

Unfortunately, we do not offer a caliber-change kit, at the moment.

[@ajforaker1471]

Bought one of these to replace my standard service M9. Absolutely love it. The one thing I would like to see is a how to on replacing the sights.

[@BerettaCommunity]

They will work on the 92A1 as well.

[@HorrorReflections]

Great Great Great! ordered this at my local shop on Friday... should have it by Tuesday! excitement!

[@rvaldesr1]

Sticking with the ol 92fs. Flawless

[@juniorlopez7062]

Bad ass video , the 96a1 is the badest pistol out there . No complaints at all I love it.

[@pinscherpower1]

Thanks for the fast reply. I didn't buy a new gun to get it repaired. The problem is to many buyers and quality is dropping. This is not the first gun company to do this to me. I think I'll take it back, and wait till the end of the world is over, Lol. I have had more problems in the last 3years buying pistols that don't work. Ammo and limp wristing have been the blame on every pistol. That's why I went back to Beretta. I wish I never sold my 8045F or my 10year old 92fs:(

[@BerettaCommunity]

Yes it is.

[@BerettaCommunity]

@samfisherskiller Because the 96A1 is based on the M9A1 platform used by the USMC

[@BerettaCommunity]

@Damageinc2485 The 96A1 was the result of redesign requests from the USMC

[@stevemichelle1203]

Love the Beretta 92 and 96. Soft recoil, inexpensive ammunition , accuracy is not bad

[@RichiesHouse]

There was 226 comments before I left this here . I had to do it .

[@BerettaCommunity]

@K2DADDYB we have the Compact with rail in Inox

[@donsnider8441]

so how does the 96A1 hold up to the 40s&w with the new design? I love the 90 series beretta but I don't care for 9mm the 96a1 is my preference I was just concerned about durability. I owned a 96c years ago and sold it and wished I hadn't because they were discontinued until the 90-two came out then the a1 series. I'm really looking forward to your input on the durability /service life of the new beretta 96A1 thanks

[@BerettaCommunity]

They are not compatible: the 92A1 uses a captive spring assembly, while the 92 uses separate rod/spring. The buffer is polymer and it is user-replaceable.

[@Carnage88]

I went with the Beretta 92A1 over the Glock 21 Gen. 4, it fits my hands and I was trained with them in the Marines. If weight is a factor or you have smaller hands look at the PX4 Storm or smaller glocks, either way your in GREAT hands.

[@MrBigden37]

Replacement grips for the 90 series pistols like Hogue and Pacmayer have been around for decades, where you been?

[@Wabbit1961]

I don't have a cam or I'd have shot a video. Maybe next time I'll photo the targets. I LIKE the weight this gun has. Steadies my aim, and I'm re-acquiring targets faster too. Now if I could only learn to pull the trigger with my finger pad instead of hooking my long narrow fingers around the trigger. They tell me that's why some of my groups are low and left. VERY easy to clean. Threw the blue cup away though. It was keeping the case from closing all the way actually making it bow in the center.

[@HaRLeYDvDsN1215]

It sticks out like the 92fs. I have the a1. Great pistol.

[@Millerman0583]

I have the 96-A1 best pistol I own. I would love to see beretta come out with a .45 model of 90 series.

[@BerettaCommunity]

@jesstaylor47 Beretta recommends the use of only Brass Cased, Factory New, SAAMI (or C.I.P.) Specification Ammunition. Steel Cased ammunition from Russia does not fall under this recommendation.

[@MTCasing1]

Have to wait till the 15 th (payday) to pick my 92A1 up... Once I decided to purchase one, time began to stand still... C'mon days!

[@shango02005]

+MTCasing1 I'm having the same experience right now. Time is just crawling!

[@BerettaCommunity]

They also happen to have started their channel on the same day....

[@BerettaCommunity]

@RottingLegion The frame of the 96A1 is in aluminum

[@dearbulls]

Love my 92a1. Wish I could see this video earlier.

[@BerettaCommunity]

At this time, metal rods are available as aftermarket (other manufacturers only) - Our parts distribution partner is Brownells (Brownells . com) They should be able to answer any compatibility part, and might have some type of catalog. Alternatively, our technical service reps are available to help. Call 800-BERETTA ext. 2003.

[@joeypetrosky9821]

Thank you so much for 40sw again ❤️

[@MrMase12]

mine doesnt always lock back into position, but i dont mind i love this pistol

[@BerettaCommunity]

The front sight should not be loose. Please, call us at 800-BERETTA ext. 2003 to speak to one of our reps.

[@fuseprime77]

It may have to do with giving the case a little bit of a buffer when they ship it out.

[@libyanspartan]

hey Beretta i just wanted to say that i love your handguns. my first firearm ever is a 90two and i'm never going to part with it. i was just wondering if you guys are going to introduce an inox version of the 92a1/96a1 in the near future?

[@sea-2366]

Wow Beretta guns are comming back with a vengenance!

[@BerettaCommunity]

The 92A1 and 96A1 are two different calibers: 9mm and 40SW

[@opmike343]

Nice to see they finally addressed the front sight issue (integral front sight on a modern service handgun? Seriously?) but they still refuse to offer a decock-only "G" style slide. Honestly, I'd just rather see the M9A1 frame (for holster options) mated to a 92A1 style slide with a G decocker instead of the manual safety. I'm by no means in the minority here, and with the current resurgences of DA/SA pistols in both defensive and competition applications, Beretta would really offer a sweet package, here.

[@markallen557]

Ok Ben, this is a great weapon as I know because I own one. The burning question is: Since you can beef this model up to handle a .40; when will this model be available in .45acp?

[@BerettaCommunity]

It's a question we get often. The frame and tolerances do not allow to build this as a .45. We do have models like the Px4, available in .45 cal.

[@dcpinner]

Hey there, if you had a choice would you get the M9A1 or the 92A1? I like the checkering on the M9A1 for a better grip, but then the 92A1 has a removable front sight. I do have a few questions though. I'm assuming the frame buffer is only on the 40 cal and not the 9mm 92A1s? Also why are the rails slightly different b/w the M9A1 and 92A1. There's like two notches on the rail of the 92A1 and only one small notch on the M9A1 model. No preference, just curious. Thanks!

[@Estacado45]

Pinscher: I bought a 92A1 two weeks ago and took it for a test drive on Friday at the range and had the exact same problem you described: same marking on the brass. This was with PMC Bronze ammo after only 150 rounds. I had to leave the range. I'm totally disappointed but unfortunately I ordered the pistol online and that retailer doesn't accept returns. So I have no choice but to sell it "used" for half the price I bought it for. Shoulda stuck to Glock!

[@intercooler2]

Any chance Beretta will make a 10mm? Or maybe a barrel retrofit to the PX4? I don't like many of the current offerings but love my PX4.

[@MyMcMichael]

Very nice gun!! I am so happy whit my 92a1!

[@2611aPrill]

I wish they put back the old combat triger guard, its more tactical looks with it.

[@drzmanproject]

btw, any tips on dealing with the slide-mounted safety/decocker would be great. This has slowed me down during IDPA competitions, and I'm leaning more toward Glock since it eliminates that step at the range. On the up-side, I've heard of an officer's life being saved when a criminal got his duty Px4 but didn't know how to take the safety off. . .

[@erichdmeck]

What is the difference between the 92A1 and the 90-two? I own a 92A1, but I have never had a chance to handle a 90-two, if that makes the explanation any easier.

[@Wabbit1961]

Awaiting delivery of my 92A1 in the next few days. Blame my brother for getting me into hanguns. I'm 51y/o (too old for this crap...lol). My brother has a 92 compact and I loved the feel of it, even though many say it's just so heavy. I kinda like that as far as recoil control and therefore accuracy. I chose this over a PX4 Storm. My brother has the PX4 in 40cal. I like the 92A1 because of the upgrades, particularly the breakdown/reassembly slide feature and the adjustable/replaceable sights.

[@bashiersoto]

Im Seriously going to buy this gun its so epic, i currently have M92F

[@davidb5681]

I was wondering if you can put 10 round and 15 round magazines in the 92a1. Thanks! David

[@xMIxpsycho]

I just bought a 92A1 cannot wait to shoot it

[@FateofDestinee]

Love the Beretta 9mm!

[@Wabbit1961]

Considering I have never shot anything larger than a .22 I think I did pretty good. I went through 500 rounds and didn't really want to stop! Using MagTech 115 grain and American Eagle 147 grain I am pretty happy with myself. I practiced a lot at 25yrds and never missed the 8" shoot-n-See Target, single and double-hand grip. 7yrds was amazing. I shot a full 17 round clip, obliterated the bullseye, and the grouping was at best the size of a silver dollar - right-handed! Adjustable sights? WHY?!

[@StriderCX]

I love Beretta's Navy SEAL ad; "In enemy territory, they speak dozens of languages. Beretta is one they all understand." - Stephen "Turbo" Toboz, Navy SEAL, awarded the Silver Star, Purple Heart, and Defender of Freedom medals.

[@BTKVENOM43]

Question? I have a 96 inox and was wondering if the barrels are interchangeable? Would like to put the silver barrel in the 96a1 and put the black one in the old 96.

[@JamesJohnson-hx4ku]

I bought the S/W Sigma .40cal; I was the RSO for 12 yrs. and thought as long as I have the basics, the gun didn't matter; I was dead wrong. I couldn’t get the weapon on paper at the 25 yd line and I'm an Expert Marksman on pistol and rifle. I’m going back to what I know. My question is the ranges and accuracy of the 92A1 & 96A1? Is the 40cal as accurate on the 25 yd line as the 9mm? I've used the 9mm in the military but want the 40cal w/out giving up performance. How about firing grouping pics?

[@intercooler2]

That's a shame. I love the 10mm round but the offerings out there aren't reliable like a Beretta. Could the .45ACP PX4 like mine fire .45 Special or with some modification?

[@BerettaCommunity]

@randomazn420 We would not be able to make a custom model, unfortunately.

[@MrBigden37]

Why didn't you contact Beretta? Would make sense to me, funny thing is that I use to know a troll who put his recoil spring in backwards and was having the very same issues you're having.

[@TheHayabusa09]

Great video; really enjoyed watching. So, my understanding b/w the 92A1 and 96A1 is the caliber? 40cal v's 9mm?

[@BerettaCommunity]

If allowed by local laws, yes.

[@998uzi]

never owned a beretta before i have a s&w m4506 a springfield xdm 45 a glock 23 and a 1911 series 80 i was wondering if this would be a solid buy and a good edition to the collection so any suggestions thanks

[@YeuLaKho]

make me want to have one, only down side is that the magazine only hold 12 rounds. Most other gun hole 15-16 rounds.

[@TJMasterK]

Can the 92A1 take custom parts that were made for the FS? I wanna get one and put a skeleton hammer on it and some new grips.

[@jameszasty3451]

i'm looking at getting either a beretta or a glock? was dead set on glock but i also like the beretta

[@jesstaylor47]

I would love to have a 90 series pistol in .45acp.

[@BerettaCommunity]

@xXpsychopathicXx420 The caliber: the 92 is 9mm while the 96 is 40SW

[@0326Ghost]

How does the M9A3 compare to the 92A1 as far as a "thicker" frame or frame size & does the M9A3 have the buffer the 92A1 has. I have been told the 92A1 is more of a bit scaled down 96A1 that shot the .40 cal thats why the buffer is there even though its not needed in the 9mm. Does the M9A3 have these beefier options to the frame ? Also with the fat traditional grip on it does it feel "just like" the traditional grip as one piece or do you feel a "transition" from the frame to the actual grip?

[@BerettaCommunity]

@adrian1986able It does not come with night sights.

[@CptSmokeAlot]

So I've been bouncing around the various forums is Point of Aim = Point of Impact? Or is it not so cut and dry?? LIke I've heard it's point of aim equal to point of impact at 20 yds and High or Low based on distance I'm not talking 100 yards or anything but from 5 - 50 yds.

[@joedognorth]

@berettacommunity, have put 800 round through my 92a1 since march and am now noticing the part of the frame where the lugs of the locking block sit are mushrooming down.is this a known problem to beretta?will they warranty it?love the pistol and would hate to have to sell and go with another brand

[@ElementTijuana]

Quick question. Is it true that the 96a1 is the exact same frame as the 92fs? Would that mean that the 96a1 mag is the same as the 92fs? Or are they different in size. Im trying to purchase a mag holder for the 96a1 online but not sure if to purchase it for a 9mm size2 or 40cal size3

[@BerettaCommunity]

@Madison1911R1 Two magazines with each gun for the civilian version

[@BerettaCommunity]

The one you own :)

[@9mmparadox]

I have a 90-two... great gun. In the future I hope to get a 92a1 and have cerakote finish to make it look like an INOX. Or I'll just go with an INOX... an accessory rail changes the looks of a pistol and kind of lowers the aesthetic appeal.

[@krhofbauer]

So what's the difference between the 92a1 and 96a1? He failed to mention that.

[@BerettaCommunity]

Send us your video review. We'd love to share it with Beretta Nation!

[@samfisherskiller]

So my barrel doesnt have the 40. In bright white, is this something that is new or old ? Or even replaced.

[@BerettaCommunity]

The 92A1 holds 17 rounds.

[@raphu604]

Is it possible to put a 92FS stainless, non-captured guide rod & spring into the 92A1?

[@epic3932]

Cool video thanks

[@jeffstone7912]

I would like to buy a 92A1 or 96A1 and have the ability to change from 40cal to 9mm is there a kit to do so. I have a Sig 226 Tacops and bought a kit from Sigs web site. I bought a 40 cal kit and a 22lr kit. Sig also has a 357 Sig kit. I was a medic in the 82nd Airborne and really liked my M9 and figure It is now time to get a Beretta.

[@samfisherskiller]

Why dont you carry inox barrels and hammers for the 96A1? 92 models have more options. Elaborate on that for me. Thanks

[@IamtheMindless]

So.. what's the difference between the 92a1 and 96a1? The bullet size?

[@daviddaniel9982]

Are the 92A1 and the 96A1 the exact same size.. Trying to track down a holster and wanted to make sure a 92A1 holster would accommodate the 96A1. They look identical.

[@BerettaCommunity]

yes, they are.

[@daviddaniel9982]

Perfect, thank you.

[@mdlindsey]

The 96A1 has a rounded trigger guard though...

[@BerettaCommunity]

@IamtheMindless Yes.