[Official] How to Install a Pioneer Wall-Mounted Ductless Mini Split

This video shows you how to install your newly purchased Pioner mini split system.
Shown in the video is a WYS-22 Quantum series system in 12000 BTU and 110/120V, but the process is nearly identical for other voltages, capacities, and product series of wall-mounted ductless heat pumps.
Subscribe to the Pioneer Mini Split KZbin channel here:
kzbin.info...
Buy your Pioneer Mini Split here:
www.pioneerminisplit.com/
Download our app on the app store, search for "Pioneer Official Store" on iOS Apple app store or Android Google Play.
Learn more about Parker Davis HVAC International here:
www.pdhvac.com/
Chapters:
00:00 Intro and Tools Needed
00:58 Indoor Unit Install Preparation
04:23 Mounting Preparation
04:56 Control Cable Wiring
06:52 Right-Rear Pipe Bending
07:16 Lineset Uncoiling
07:41 Removing Pressure Caps
08:14 Connecting Drain Extension
08:32 Connecting the Line Set
09:11 Wrapping the Utility Bundle
09:38 Left-Rear Pipe Bending
10:11 If Doing a Side Exit...
10:57 Indoor Mounting Template
11:13 Creating the Wall Hole
11:30 Confirm the Wall Plate
11:54 Drill the Mounting Holes
12:23 Mount the Wall Plate
13:00 Passing Bundle Through Wall
14:00 Outdoor Unit Install Preparation
14:55 Outdoor Unit Mounting
15:39 Outdoor Unit Electrical Wiring
17:53 Refrigerant Valves Preparation
18:30 Connecting Lineset to Valves
18:55 Evacuating the Refrigerant Circuit
19:58 Leak Checking and Opening Valves
20:47 Leak Checking with Soapy Water
21:13 Finishing Up with Outdoor Unit
21:59 Indoor Unit Drainage Test
22:37 Removing/Handling Air Filters
23:20 Post-Installation Unit Testing

[@taylors4243]

pioneer customer service is beyond expectations; outstanding help.

[@PioneerMiniSplit]

Thank you for trusting our company!

[@beebop9808]

Thanks! I've got an 18k being delivered next week. Let the adventures begin....

[@PioneerMiniSplit]

You can do it!

[@thierryaworet]

Thanks...really appreciate it

[@xabilene]

Thanks for the video! Followed the steps but the cold setting doesn't get cold. No leaks were found... wondering if it need to run for a few hours?

[@user-ch8bi9wo2g]

I’m a service technician and I purchased a 1 ton mini from pioneer located in Florida, my only issue is the insulation that the line set they send you isn’t the same as this video shows…. It’s so thick you can’t flush the unit on the wall, I’m going to have to re-insulate half of the line.

[@venvnco6259]

Do they use 410a or the new refregarant.

[@PioneerMiniSplit]

We are transitioning to the new refrigerant in the coming year, but R410a systems can still be installed until 2026.

[@unknownrelics5078]

I have a 230v unit. I have L1, L2 & G for the power supply terminals. The Ground wire is green so I know where that goes, my other two wires are Red & Black. Which wire goes on L1 and which wire goes on L2?

[@PioneerMiniSplit]

Generally black goes on L1 and red to L2.

[@jenniferslaughter1549]

Do you have a video for cleaning the cassette?

[@user-ch8bi9wo2g]

There’s plenty of videos on here on how to clean cassettes. If you keep your filters clean and washed you should be ok!

[@jenniferslaughter1549]

@@user-ch8bi9wo2g I’m wanting a Pioneer specific video on how to deep clean and/or how to remove the fan wheel to clean that. Yes, lots of videos but none Pioneer specific on how to remove the fan wheel.

[@user-ch8bi9wo2g]

@@jenniferslaughter1549 they’re pretty basic and all made the same but 👌

[@jacksonbravo7634]

Hello, I recently purchased the Pioneer Hyperformance 24,000 BTU 21 SEER2 Ductless Mini Split Inverter++ Wi-Fi Enabled Air Conditioner Hyper Heat Pump Full Set 230V with Installation Kit. For my DIY installation, I'm wondering if I need to buy a "vacuum pump pressure gauge connect" for testing purposes to ensure I can draw a sufficient vacuum on the refrigerant. The advertisement suggested that this mini-split is easy to set up without needing a vacuum pump, but I want to be sure. Should I invest in a vacuum pump, or would it be unnecessary for this installation? Knowing this will help me decide whether to hire a professional for this specific task, so I don't buy the vacuum pump. Thank you.

[@PioneerMiniSplit]

The way it works is that the outdoor condensing unit is factory pre-charged with R410a to support line lengths up to 25 ft long. You will first need to remove the air from the lines before releasing the refrigerant from the outdoor unit, using a vacuum pump or the Kwik-e-vac flushing kit that we sell, which can bypass that step. See our video on that product here: kzbin.info/www/bejne/kHW7enyArKmeg5osi=Typ0gCPgLK3tQXfe

[@MohamedRajwaanHussain]

👍

[@lpalmer8035]

the background music is very annoying

[@PioneerMiniSplit]

Here is a version without any background music: kzbin.info/www/bejne/a6jHg6GvbJ2fpcU