Official OnePlus 8T 3D Glass Screen Protector Installation Review & All Official Cases ($10offer)

[@tomaskonkol8894]

Never remove and reapply glass protector for 99% will be ruined and more dust will be sticking on it. Best way to apply any protector its in the bathroom after you use hot shower for 5 min all dust in the air will be trap on the small water droplets and fall on the floor. 2nd option its to use some spray bottle wit very fine nozzle and spray all room from highest point as possible then leave 1min to settle. No more dust when applying protector. Good video thanks.

[@itsyoboigucci7578]

no way im doing all that work to just apply a screen protector. i'd rather use my phone in original form, without any screen protector but with just a case

[@lighty8685]

@@itsyoboigucci7578 he said in case u failed to apply the glass protector... i personally would do all that work for that since its my phone and that thing costs 25$

[@bogdanbelciu6242]

Actually I did it with the same protector and the same phone, and I unsticked it and sticked it back 3 times until it went perfectly. Even if gets dirt on the sticky side you can clean it in many ways. Mine is now perfectly fitted, no bubbles whatever.

[@faizalishak8528]

Thanks for sharing👍

[@dr.fitprofessor1970]

It looks like a really nice first party screen protector. Although, I chose to go with a third party screen protector and camera module protector. Luiber makes the one that I chose and it fits flawlessly. Moreover, they give you three tempered glass screen protectors with three camera module protectors in the box. That's pretty handy for someone like me that tends to break screen protectors every few months. I really love the look of the OnePlus cases they are very attractive. My only real concern with them is that they really do not look like they have much shock protection. They kind of look like hard shells that snap onto your phone and when you are dealing with minor amounts of friction it seems to me they could damage the finish of your phone. If one plus would just put a thin layer of TPU inside the case it would offer a lot more protection in my opinion. After trying several cases I decided to go with the Spigen tough armor case. It has an inner layer of TPU that stretches around the phone accompanied by hard shell that snaps on over the top. I really feel that it offers a lot more protection and I feel like my phone will survive an inevitable fall.

[@princesiroha4600]

Thanks for the info on glass protecter. Was thinking on buy or not but you covered every part smoothly. Will rock on my 8T. Great content 👍

[@nikverschuren4291]

Just a tip, when you Peel off the skin hold the tempered glass sticky part face down. That part can also collect dust.

[@JERZEELOON]

I got this screen protector cause 1st I bought a cheap one and the fingerprint scanner didn't work with it. The official screen protector went on fine and the fingerprint scanner works but unfortunately only a day after applying I got a crack across the bottom corner and I have no clue how it happened but it's disappointing considering price.

[@Curious_BeingNX]

Same, crack on upper right margin/ corner. I think with glass protector, there is always this risk. But i think 1200 is bit too much every few months or so.

[@chrislopez1918]

Just got the circuit board case today it is sweet , and the phone is fast at everything I throw at it great phone

[@rubenmoreno407]

Mine came with the phone, it looks nice but there's no grip and it's too bulky.

[@smey02]

I will never understand why they have to make these black boarders...would Look much better without, and it could probably be a bit cheaper aswell

[@MarinosAU79]

So the black outlining doesn't cover the display? Excuse me but, do you need a pair of glasses to see that it covers a major part of the display?

[@bluerunner556]

You can save a lot of headache by leaving the plastic screen protector on until the very last second. The dust be everywhere

[@ashishtamang3659]

Which case is best for protection

[@dr.sivaramakrishna3766]

Good evening sir. Thank you so much for your review. I would like to purchase OnePlus 8T bumper case. Could it protect back Canara and from display ? . At present I am using Kapaver rugged cover. Which one of the three cases you reviewed is better for protection and grip ?Kindly answer sir.

[@Rushi148]

Which one should I buy oneplus 8 Pro or oneplus 9 pro ??

[@TKBay]

right now the 8 pro is the best

[@aarifeena2745]

@@TKBay screen protector there???

[@fowlman7254]

Anyone else here have the 8T and not seeing the cinematic video features? I got mine 2 days ago .. does it require updates?

[@irfanbandukwala41]

Does the one plus shops install the case and give us

[@adisonz]

the black bar on the screen protector is blocking 2 mm of screen on left & right

[@Paulorp1979]

does not disturb the front photos?

[@lany_07gaming]

That's nice info and case's.👍

[@TKBay]

Glad you liked it

[@dinmen]

The Karbon is the most expensive any idea why?

[@helenk1104]

@@dinmen don't know

[@rizguy]

@@dinmen it's made of aramid fibers

[@sampanshukla6488]

Is it Available in India ? and how can I ordered that in Ahmedabad Gujarat is it available On Amazon or Flipkart ?

[@Doesit_matter]

I just wanted to ask you that if we don't peel off the plastic protector and apply the glass protector on it, will there be any problem????

[@flasharmy612]

I clicked thise video .. only to see .. thise beard ..😂😂😂😂

[@bogdanbelciu6242]

For all those asking - YES, it is compatible with ANY bloody case, it adds less than 1mm in thickness of the phone and it does not exceed the lateral size of the phone! Of course any case will fit. Someone who didn't see the phone without the screen protector will not even notice it. The actual thickness is 0.6mm.

[@naclsky4593]

my issue is even with a case it seems slightest drop breaks the oneplus protectors. I had this same issue with my 5t and 6t, meaning me and my clumsy self breaks them with just 2 foot drops from my pocket at my desk or off my desktop.

[@LouJ247]

Awesome info

[@TKBay]

Glad you liked it

[@Bunch-of-numbers]

I did this with official oneplus nord glass and the black border covers a lot of screen. Thinking about removing it. Bad design

[@speedster784]

Question if you buy the 8T directly from OnePlus site will it be lock to T-Mobile also??

[@TKBay]

Stays unlocked , and it will work on tmobile

[@rubenmoreno407]

Unlocked = unlocked

[@Brokkolibomber]

Is the screen protector compatible with spigen cases? Just got two other which are to big for the spigen cases

[@lone1mis]

Curious also with the UAG case.... The price ain't no joke that's why I want to confirm if there are compatibility issues....

[@falk9738]

have you bought it and was it compatible?

[@kristiyankovachev2274]

But when you have face unlock it does that animation around the front camera when you place the screen protector still see it ??

[@bogdanbelciu6242]

yes, it does, the green dot is there. The round circling is a bit obscured by the black circle around the camera, but it is visible..

[@Paulorp1979]

Hello, how are you? Is there a hole in the camera location?

[@EvoUmbreon]

I bought this glass protector and no there isn't a hole around the front facing camera. However there is a black ring around the camera on the glass protector. The surface around the camera is seamless and completely flat.

[@kishor3242]

Sir I need the cases where I can buy it ?????

[@aryansrivastava4055]

The official oneplus site. Search "buy oneplus 8t" and scroll a bit down on the official website. You'll find them

[@TKBay]

Oneplus site

[@faizalishak8528]

For third party out there go for Dbrand👍

[@Chemy.]

You made one of my typical mistakes lol, good cases

[@HaimPeretz]

Why they didn't make glass screen protector for the 8 Pro?

[@theonlyjin7927]

curved screen

[@theonlyjin7927]

@Anup Madankar they can't, because not fit well on curved screen, and they know this issue exactly, it is very difficult to implement

[@theonlyjin7927]

@Anup Madankar yeah, i put on original one, and every original glass have a black edges, unfortunately, but the feels premium on the phone

[@theonlyjin7927]

@Anup Madankar No sight is bad, of the curved edges by the way, It's just not compatible well some of cases, misstouch, and the glass protectors

[@theonlyjin7927]

@Anup Madankar yeah, thats why avoid the curved edges, most of people facing some of issues with curved edges, but not everyone, i have a big hands and i really struggling with the typing/handle on these phones, never ever curved again

[@saiprakash827]

Bro please do video about Mi 10T glass protector & back cases ❤️

[@EvoUmbreon]

I bought this glass protector the other day, it's very nice! However I have no idea why they thought it was a good idea to put that black ring around the camera. What is the purpose of that? It just adds a bit of a distracting effect on the screen. Very terrible design there. It's completely unnecessary. But the surface is great

[@manoy8747]

does the black edge really covers a portion of the screen? planning to buy this for my 8t

[@EvoUmbreon]

@@manoy8747 the outer perimeter of it does a tiny bit. I guess a better way to put it, you would have to look for it to notice. The camera black ring though, depending on how well you placed the protector you might notice it. Overall, the glass protector's surface is amazing though. It honestly really doesn't feel like there is nothing at all. So 5 stars there for it's surface quality. Am I happy with it? I mean I really wish they wouldn't have put any black around this at all, but the surface quality I feel makes up for it. The finger print scanner works amazing and so do all the touch areas. Extremely responsive. Let me know if you do get it for the 8T or if you find another one you like please. I hope this helped and thanks

[@nagdarling8290]

Same Glass 70rs Got For My Oneplus8T

[@supernova4414]

Kaha se ?

[@stephencarres1977]

Don't buy, poor quality, bubbles around the edges like it doesn't have enough glue. You may be lucky with a good one but the price doesn't worth the risk

[@amitkanji]

Brand OnePlus is not at all reliable. They don't provide accessories support for their older model. I have OP6 and looking for OnePlus tempered glass and it is always showing out of stock..

[@adrianjaimes14]

Maybe that speck of dust was because at 3:48 you had the sticky part facing up for a minute smfh

[@afsalkottayadiyil]

Do u want like and subscribe.. please send OnePlus 8T case back colour and tempered ..

[@verymeanthoughts]

i will never use a screen protector. always dust, everywhere

[@jeetroychoudhury1840]

the quality of the screen protector is poor at best. It cracks at the lightest of drops, even if your phones lands on a considerably soft surface. Buyer beware!

[@TheRohit382]

I bought the official glass protector and it broke within two days. 😔

[@TheSuri1021]

Same for me

[@EvoUmbreon]

How did it break for you if you don't mind me asking? Or what caused it? I bought this too

[@TheSuri1021]

@@EvoUmbreon it fell down from half meter distance

[@EvoUmbreon]

@@TheSuri1021 ohh wow, maybe it is pretty fragile. Well I hope your able to find another one that's better. Ya this official one is a bit on the pricey side for that level of quality

[@Thescientist16]

Lmao. The screen gaurd which comes applied on the device is the best. Never going to remove it.