You have a great talent with woodworking, my friend! 👍🏽 Another quality built shop jig, this will save you time and give you perfectly accurate cuts every time.👌🏽 Fantastic job mate.
@TachiOhyo563 жыл бұрын
Hello, Bill Thank you for coming to me today And thank you for your wonderful praise comments From Japan to my friends See you
@davidcurtis539810 ай бұрын
I like the sanding block with the handle very much. I never thought of this and I will be making some real soon. MASTERFUL!!!!!
@TachiOhyo5610 ай бұрын
Hi David. Thank you for coming to my workshop. And thank you for your wonderful comments, this sanding block is the most popular in my videos. Tachi
@RyanNiemer3 жыл бұрын
Love this! I would much rather make something similar like this than a large jig for my table saw! Thank you for the inspiration!
@TachiOhyo563 жыл бұрын
Hello, Ryan Thank you for coming to my workshop And thank you for your wonderful comments I agree with you, I love the simplest possible Thank you from Japan
@richragan48103 жыл бұрын
Ohyo I never get tired of watching your videos! You're in my top 2 my friend. Sometimes I watch them over and over and enjoy your talent and the music! Thank you for all the work you do! Your friend from Lancaster County Pennsylvania US!
@TachiOhyo563 жыл бұрын
Hello, Rich Thank you for coming to my workshop today And thank you for your wonderful praise comments It is my great encouragement and joy for you to enjoy my video. Thank you from Japan to my mate See you
@pjhalchemy3 жыл бұрын
Once again a simple jig for production. Nice design! The only thing I might add is a stick on tape measure so I could set it for sizes. If you start it at the saw blade and go back toward the stop. Thanks again my friend for a fine fixture!
@TachiOhyo563 жыл бұрын
Hello, pjsalchemy Thank you for always watching my video And thank you for your nice suggestion, I will also use a tape measure. Thank you
@Richard-vw8no3 жыл бұрын
It's always a pleasure watching you work.
@TachiOhyo563 жыл бұрын
Hello Richard Thank you for coming to my workshop And thank you for the wonderful comments, I am very happy Thank you from Japan See you
@enryraleight15273 жыл бұрын
I really like your ability to make these tools. Excellent work. Greetings from Spain
@TachiOhyo563 жыл бұрын
Hello Enry Thank you for always supporting me And I am very pleased with your comment. Thank you from Japan
@gautambarua82603 жыл бұрын
The best camera work I seen in KZbin. Artistic
@TachiOhyo563 жыл бұрын
Hello, gautam Thank you for watching my video And I'm impressed with the best comments praising my camera work. Thank you Sincerely
@harrypowers94123 жыл бұрын
Thank you, I always learn new techniques watching your videos. 👍🏻
@TachiOhyo563 жыл бұрын
Hello, Harry Thank you for coming to my workshop today And thank you for your wonderful comments, let's enjoy woodworking together Thank you from Japan
@MCsCreations3 жыл бұрын
Really interesting work, my friend! 😃 The jig looks fantastic! And works great! Stay safe there with your family! 🖖😊
@TachiOhyo563 жыл бұрын
Hello MC's Thank you for always coming to my workshop And always thank you for your kind comments👍 Thank you friends
@giusepperussotto25343 жыл бұрын
You made me happy, i have to craft several frames, and your precious work will be of great help to me...and to many others in my opinion. Thank you so much, friend, stay safe.
@TachiOhyo563 жыл бұрын
Hello Giuseppe Thank you for coming to see me again this week Thank you for your wonderful and kind comments Please make a beautiful frame You are fine too. Thank you from Japan to my friends
@ricardoleal80583 жыл бұрын
Es un gran honor para mi ver su trabajo , la forma en que desarrolla todo el proyecto que está elaborando , sus técnicas , es genial , saludos desde la ciudad de Querétaro, México 🇲🇽 .
@TachiOhyo563 жыл бұрын
Hola amigo ricardo Bienvenidos a mi taller hoy. Y gracias por sus amables y maravillosos comentarios. Respuesta de Nagoya, Japón Tachi
@Mr2at3 жыл бұрын
That has to be the best picture frame jig design on you tube. Bravo. Liked, commented and subscribed.
@TachiOhyo563 жыл бұрын
Hello, Mr2at Thank you for coming to my video And thank you for your wonderful comments I used to do this with a table saw. This new jig is the best pairing with Miter Saw! I wish you good luck. Thank you Reply with all my heart from Japan
@Mr2at3 жыл бұрын
@@TachiOhyo56 The compact design is amazing. Hello from England
@bowmanj6033 жыл бұрын
It doesn't do anything. What exactly do you mean by 'best'? It does NOTHING. Have you ever made a picture frame? This thing helps you how? It does NOTHING. The saw cuts 45 degrees without the thing. There's no way to measure length on this thing and there's no way to cut out the relief. So what is it good for? and why do you say best? BEST AT WHAT?
@JohnColgan.3 жыл бұрын
Your work is fabulous, I've watched your videos for long time, very impressed with quality & accuracy, even your workshop jigs are working art! Well done sir, keep safe & healthy
@TachiOhyo563 жыл бұрын
Hello John Thank you for coming to my workshop this week as well Thank you for the wonderful and wonderful comments And kind comments! You are fine too. Thank you from Japan to my friends
@hai99noi3 жыл бұрын
Hope your new blade is OK, the spark frightened me. Great design and good presentation. Thank you for sharing.
@TachiOhyo563 жыл бұрын
Hello, Hai Thank you for supporting my video And thank you for the wonderful comments I cut a little nail, saw blade and I'm safe! I'm sorry to surprise you. Thank you See you
@jalechavez60423 жыл бұрын
Súper.....muy linda manera de trabajar la Madera....!! Muy buenaaa que ideaaaaa
@TachiOhyo563 жыл бұрын
Hola Jale Gracias por venir a mi taller Y gracias por tus maravillosos comentarios. Gracias Sinceramente
@MauricioGoncalves.3 жыл бұрын
Ficou ótimo esse gabarito, salvei em favoritos e um dia vou tentar fazer um igual. Grande abraço do Brasil.
@TachiOhyo563 жыл бұрын
Olá,Maurício Obrigado por sempre assistir meu video Será divertido se todos fizerem este modelo simples! Obrigado
@youtukang3 жыл бұрын
🙂👍🤝🇮🇩🇮🇩
@michelsbastelkeller3713 жыл бұрын
Hello, this is Michael from Germany, this is a really great device. I wait for my new DWE 7492 every day. then I can finally work again.
@TachiOhyo563 жыл бұрын
Hello, Michael I'm a Japanese tachi. Thank you for watching my video again and commenting Your DeWalt is higher grade than my DeWalt! !! Wonderful! If you get it, you will be able to do a good job, love the tool and use it carefully. Thank you
@ecaff95153 жыл бұрын
Excellent video and process. Perfect for our frames and similar projects. Thanks for sharing...
@TachiOhyo563 жыл бұрын
Hello E Caff Thank you for supporting my video Thanks to that, I can continue woodworking. Thank you my friend
@juanartesero10823 жыл бұрын
Gracias por compartir esas creaciones tan prácticas. Un saludo desde España
@TachiOhyo563 жыл бұрын
Hola juan Gracias por apoyarme siempre Y estoy muy satisfecho con tu comentario. Gracias de japon
@garrigarikov45413 жыл бұрын
Вы очень хороший мастер! Всегда с удовольствием смотрю Ваши ролики !
@TachiOhyo563 жыл бұрын
Привет Garikov Спасибо, что всегда наслаждаетесь моим видео Я очень доволен вашими комментариями. Спасибо Увидимся
@davidharvey56723 жыл бұрын
I have never seen this method before it looks perfect. I will make one soon. I'm not sure if my miter saw is as accurate as yours. I hope the blade is ok from cutting the screw
@TachiOhyo563 жыл бұрын
Hello, David Thank you for always coming to my workshop And thank you for the wonderful comment Yes, the saw blade was okay, Thank you from Japan
@german89243 жыл бұрын
Muy bueno Ohyo. Como siempre!! Saludos de Argentina.
@TachiOhyo563 жыл бұрын
Hola,ger man Gracias por ver siempre mi video Y gracias por tu lindo comentario, disfrutemos trabajando la madera juntos. Gracias
@Gelovan6823 жыл бұрын
9 minutes of meditation for me
@TachiOhyo563 жыл бұрын
Hello, Thank you for watching my video And thank you for your comment Is my video annoying you! ?? If so, I'm sorry Thank you
@darkosimic863 жыл бұрын
@@TachiOhyo56 I believe he meant that your video is very relaxing! I agree with that, and very useful too! Thank you!
@TachiOhyo563 жыл бұрын
@@darkosimic86 Hello Darko Thank you for a very nice interpreter I can only speak my mother tongue, helped by translation software. I thank you for your kindness. See you
@UlisesUlises-xc6wp3 жыл бұрын
Buena guía para los marcos, muchas gracias maestro. ✨🌳✨🌳✨
@TachiOhyo563 жыл бұрын
Hola Ulises22 Gracias por venir siempre a mi taller. Y gracias por los buenos comentarios👍
@guylabesseuille27163 жыл бұрын
Un nouveau guide très utile et aussi un agréable moment en votre compagnie. Bravo et merci pour le partage. A bientôt mon ami.
@TachiOhyo563 жыл бұрын
Bonjour Guy Merci de soutenir ma vidéo Et merci pour les merveilleux commentaires Oui, je passe un bon moment deux jours par semaine. Merci À plus
@mircomasini95913 жыл бұрын
Ottimo per realizzare cornici complimenti per la sua costruzione Maestro!!!!👍🏼👌
@TachiOhyo563 жыл бұрын
Ciao, Mirco Grazie per aver supportato il mio video E grazie per i bellissimi commenti
@1deerndingo2 жыл бұрын
Thats a good jig.
@TachiOhyo562 жыл бұрын
Hello friend Danny. Thank you for your good comments. Tachi
@dennisdownes9319 Жыл бұрын
Beautiful!! DD
@TachiOhyo56 Жыл бұрын
Hello Dennis. Thank you for your wonderful comment.
@2CPropertiesTeams Жыл бұрын
That was outstanding! Well done.
@TachiOhyo56 Жыл бұрын
Hello friends 2CProperties. Sorry, I don't have a business plan, and there are no blueprints. Thank you very much. Tachi
@panamafred13 жыл бұрын
Muy buen trabajo. ¡Gracias!
@TachiOhyo563 жыл бұрын
Hola panamá Gracias por venir a mi taller Y gracias por el lindo comentario. ¡Mis imprescindibles! Muy conveniente Gracias por ver
@vasiliyivanishvili90253 жыл бұрын
Good tool! Thank you for video!
@TachiOhyo563 жыл бұрын
Hello, Vasiliy Thank you for coming to my workshop today And thank you for your wonderful comments👍 Letter from Japan See you
@leahcimressik59943 жыл бұрын
you always have great ideas👍👏🤩
@TachiOhyo563 жыл бұрын
Hello, Michael Thank you for coming to see me as usual And thank you for the nice comment👍
@shahbazkh28853 жыл бұрын
Hello.. As usual, your business is clean and fun
@TachiOhyo563 жыл бұрын
Hello,Shahbaz Thank you for supporting my video And thank you for the wonderful comments I'm happy that you enjoyed it. Thank you See you
@Serega_Siniy3 жыл бұрын
Хорошо придумал! Из Беларуси с любовью!👍👍👍💖✔
@TachiOhyo563 жыл бұрын
Привет, Siniy Спасибо, что всегда приходите в мою мастерскую И спасибо за приятный комментарий С любовью из Японии
@patrickbecquet15563 жыл бұрын
toujours aussi beau et précis, bravo
@TachiOhyo563 жыл бұрын
Bonjour, patrick Merci d'être toujours venu à mon atelier Et merci pour le merveilleux commentaire
@tree_carcass_mangler3 жыл бұрын
Thumbs up and thanks for posting!
@TachiOhyo563 жыл бұрын
Hello Mangler Thank you for coming to my workshop this week as well And thank you for the wonderful comments, Thank you from Japan
@yoji_diy3 жыл бұрын
Good morning, my teacher ❗I also enjoyed your project this time too. A new slot has arrived!It's cut very beautifully. I think it works more smoothly than the slots I've used so far. 時々、自分も火花を発生させては驚く事がありますが、犯人は自分で打った釘やネイルだったりと…。😊 溝を途中まで削る場合のストッパーや処理の仕方、今週もとても参考になりました。Ohyo56の動画全ては私の趣味の時間を更に楽しくさせてくれます。Thank you!, Obrigado!and…Arigato!
Hallo Jens Vielen Dank für die Unterstützung meines Videos Und danke für die wunderbaren Kommentare "Einfach ist am besten" Ich mag es! Vielen Dank Wir sehen uns
@frittandy3 жыл бұрын
Bravissimo. GRAZIE
@TachiOhyo563 жыл бұрын
Ciao, frittandy Guarda il mio video come al solito E grazie per il tuo bel commento Dal Giappone
@masterskay_na_naberezhnoi3 жыл бұрын
Как будто детектив посмотрел :) До последнего момента не мог понять, как это работает :) Красивая работа 👍
@TachiOhyo563 жыл бұрын
Привет, Алексей Спасибо за просмотр моего видео И спасибо за хорошие комментарии Многие зрители ругали меня по той же причине, что и ваше мнение! Думаю, лучше, если результаты будут неизвестны, чтобы насладиться видео. Это плюсы и минусы. Спасибо Увидимся
@masterskay_na_naberezhnoi3 жыл бұрын
@@TachiOhyo56 я не ругаю, мне наоборот очень понравился Ваш стиль:)
@TachiOhyo563 жыл бұрын
@@masterskay_na_naberezhnoi Спасибо👍
@moyadmoyad62673 жыл бұрын
Very good friend
@TachiOhyo563 жыл бұрын
Hello, moyad Thank you for always watching my video And thank you for the nice comment thank you my friend
@SiamWoodShop3 жыл бұрын
Another great idea and expertly made. Stay safe
@TachiOhyo563 жыл бұрын
Hello, John Thank you for supporting my video as usual And thank you for your kind comments, you are fine ... Thank you See you
@daffaibnuhafiz3 жыл бұрын
Work..thanks for sharing
@TachiOhyo563 жыл бұрын
Hello Thank you for watching my video And thank you for the nice comment^^
@hassanal-mosawi42353 жыл бұрын
Well done, thanks for sharing that!
@TachiOhyo563 жыл бұрын
Hello,Hassan Thank you for always watching my video And thank you for your nice comments, let's enjoy woodworking together Thank you
@neicardozo10693 жыл бұрын
Mto bom .como sempre mestre
@TachiOhyo563 жыл бұрын
Ola nei Obrigado por apoiar meu vídeo E obrigado pelos bons comentários
@franciscoantoniopesceneto36263 жыл бұрын
Muito bom!! Feliz ano novo!!!
@TachiOhyo563 жыл бұрын
Ola Francisco Feliz ano novo do japão Desejo-lhe boa saúde e boa sorte. Obrigado
@ralphtamez54923 жыл бұрын
Gracias, perfecto!
@TachiOhyo563 жыл бұрын
Hello Ralph Thank you for coming to my workshop today And thank you for your wonderful comments Thank you from Japan👍
@dbbois3 жыл бұрын
Un bon gabarit pour les coupes d'onglet 👏👏👏
@TachiOhyo563 жыл бұрын
Bonjour, dbbois Merci d'être toujours venu à mon atelier Et merci pour les bons commentaires Merci du Japon
3 жыл бұрын
Olá meu amigo! Cheguei só pra prestigiar o seu trabalho e deixar aquela força no like.
@TachiOhyo563 жыл бұрын
Ola Alexander Estou muito feliz em vê-lo novamente depois de muito tempo! Eu estava esperando sua chegada. Obrigado meu amigo
@C_David_19783 жыл бұрын
Merci beaucoup de ce partage! Un guide utile et très pratique! A bientôt.
@TachiOhyo563 жыл бұрын
Bonjour David Merci d'être venu à nouveau à mon atelier Et merci pour vos merveilleux commentaires Rendez-vous dans la prochaine vidéo Merci
@herbsu4330 Жыл бұрын
How do you account for the size of the picture frame sides?. This jig just cuts miters that can be done with any method of stop blocks.
@TachiOhyo56 Жыл бұрын
Hello herbsu. Thank you for watching my video and for your comments. My woodworking is my whim and adventure. As you say, this is a stupid and useless jig. perhaps! Thank you for telling me.
@Alexkikboxer3 жыл бұрын
hello my friend, today I saw a lot of new things. Cut-off saw. and also the Red car, I think Toyota?
@TachiOhyo563 жыл бұрын
Hello, ALEK Thank you for always coming to my workshop And thank you for the wonderful comment As you say, the bright red car is Toyota, the Mad Red is Suzuki, and it's a very good compact car. Thank you See you
@j.m.castilla71503 жыл бұрын
thanks for your videos I'm going to make this template for my workshop I always had problem with precise cutting on the door covers and I never thought about this solution only I need it 2.20 meters thanks
@TachiOhyo563 жыл бұрын
Hello J.M. Thank you for always watching my video Small projects and large projects are no different I hope this video helps you. Thank you
@j.m.castilla71503 жыл бұрын
@@TachiOhyo56 it certainly will Thank my Lord
@WoodBrothersNDS3 жыл бұрын
Veramente un Jig molto interessante... questo mi piace tantissimo, Ciao a presto. :-)
@TachiOhyo563 жыл бұрын
Ciao, Brothers Grazie per essere sempre venuto nel mio laboratorio E grazie per il bellissimo commento Ci vediamo
@jonatangutlerzimmermann88413 жыл бұрын
Congratulations!!!
@TachiOhyo563 жыл бұрын
Hello Jonatan Thank you for always watching my video And thank you for the nice comment
@bouxaind3 жыл бұрын
bonjour, super pratique en tout cas. Je vais m'y mettre très rapidement car c'est vraiment bien utile. Merci du partage
@TachiOhyo563 жыл бұрын
Bonjour Dominique Merci d'être venu me voir aujourd'hui Et de bons commentaires! !! Je te souhaite bonne chance. De tout mon coeur du Japon Merci encore
@nestorvera42543 жыл бұрын
Hola amigo, excelente Idea lástima q yo no tenga una engletadora, gracias Saludos.
@TachiOhyo563 жыл бұрын
Hola, Nestor Gracias por apoyar mi video como de costumbre Y gracias por los maravillosos comentarios. Gracias Nos vemos
@QUERBEET-DIES-UND-DAS3 жыл бұрын
Nature-Science-Creation-INTERNATIONAL This is my second channel! Nice job (as always) from you! 🙂🌺👍18
@TachiOhyo563 жыл бұрын
Hello Heim Thank you for always watching my video Enjoy the simple jig and making process together Thank you
@QUERBEET-DIES-UND-DAS3 жыл бұрын
🖐
@bret_Lambky3 жыл бұрын
Where do you buy your T channel from?
@TachiOhyo563 жыл бұрын
Hello Bret Thank you for always watching my video This is a 4-stroke tubular aluminum that I bought at a local hardware store, and I cut a 6.5mm gap on one side with a table saw, which is very cheap! Thank you
@marceloheidrich21063 жыл бұрын
Otima idéia...
@TachiOhyo563 жыл бұрын
Ola marcelo Obrigado por assistir meu vídeo E obrigado pelo seu comentário
@ciro1957toro3 жыл бұрын
Hola! He notado carpintería tiene muchos útiles para facilitar, en comparación de otros oficios. Albañil: nivel, espátula, rasero.
@TachiOhyo563 жыл бұрын
Hola willian Gracias por venir siempre a mi taller. Y gracias por el maravilloso comentario. Como dices, es necesario cortar muchas partes con precisión y seguridad. Gracias
@billcoley85203 жыл бұрын
So how do you get the first cut? Do you remove the stop block
@TachiOhyo563 жыл бұрын
Hello BILL Thank you for watching my video After cross-cutting to a certain length with the jig removed, use this jig to cut 45 degrees. Thank you
@reginaantonino60473 жыл бұрын
Ottimo
@TachiOhyo563 жыл бұрын
Bonjour, Antonino Merci de toujours regarder ma vidéo Et merci pour le gentil commentaire,
@Kai778843 жыл бұрын
Hallo ein schönes Video. Mit freundlichen Grüßen aus Deutschland 🇩🇪 👋👋👋 Kai
@TachiOhyo563 жыл бұрын
Hallo,Kai Vielen Dank, dass Sie sich mein Video immer angesehen haben Und danke für die guten Kommentare🇩🇪🇯🇵👍
@user-lw9tv9to9b3 жыл бұрын
Вечер добрый! Отличный станок, идея шикарная! Планирую тоже сделать некое приспособление для рамок, но на базе циркулярки и фрезера, за неимением другого инструмента. Вы - мастер джигов :) Где вы берете такую интересную фанеру со скругленными углами? И простите за, возможно, неуместный вопрос, но Suzuki какой именно? У меня Suzuki Kei, весьма доволен :)
@TachiOhyo563 жыл бұрын
Здравствуйте Андрей Спасибо, что посмотрели мое видео как обычно И спасибо за прекрасные комментарии Эта фанера - это верхняя часть школьной парты, которую следует утилизировать! Меня отдали школьным чиновникам. Мой «Сузуки» - это «Сузуки Вагон Р Турбо» Спасибо Увидимся
@user-lw9tv9to9b3 жыл бұрын
@@TachiOhyo56 Да, фанера очень похожа на что-то из школьной мебели :) Видимо, весьма хорошего качества. Здорово, что ей нашлось применение, вы вдыхаете в неё новую жизнь и это круто. Спасибо за ответы :)
@viktormakarenko24482 жыл бұрын
Где вы берете такую интересную фанеру со скругленными углами? Че поедешь туда покупать?
@gogo55423 жыл бұрын
waw great project. but i wanna video about Jig for picture frame by using circular saw if possible thank u very much
@TachiOhyo563 жыл бұрын
Hello, samy Thank you for watching my video And thank you for the nice suggestion, one day we will do it. Thank you
@weekendwarrior95703 жыл бұрын
Excellent
@TachiOhyo563 жыл бұрын
Hello, Warrior Thank you for coming to my workshop today And great comments! !! With all my heart from Japan Thank you again
@khaledmoussallem44723 жыл бұрын
حديث عن رسول الله صلى الله عليه وسلم يقول: إن الله يحب من العبد إذا عمل عملًا أن يُتقنه وحضرتك متقن بارع، أفضل علامة لحضرتك في النجارة.. حقًا مُبدعٌ في عملك
@TachiOhyo563 жыл бұрын
النعم العظيمة والثناء العظيم هو الصلع الكبير شكرا لك
@sergey31rus203 жыл бұрын
👍👍👍!
@TachiOhyo563 жыл бұрын
Привет sergey Спасибо, что всегда смотрите мое видео👍👍
M. OHYO 56, C'EST TOUJOURS UN GRAN PLAISIR...👍👍👍👍... 🙏😷❤️😷🙏
@TachiOhyo563 жыл бұрын
Bonjour, Roberto Merci de toujours regarder ma vidéo Et je suis très heureux que vous ayez apprécié ma vidéo.🙏 Merci
@sokjunjung72443 жыл бұрын
오! 놀라운 지그네요...프레임만들때 정말 요긴하겠습니다
@TachiOhyo563 жыл бұрын
안녕하세요, 내 동영상을보고 돼야만되어 감사합니다 그리고 멋진 코멘트 고마워요
@koccocarrasco56963 жыл бұрын
👍👍👍
@TachiOhyo563 жыл бұрын
Hola kocco Gracias por apoyar mi video👍👍👍
@fabricerotureau72413 жыл бұрын
Salut l'ami merci pour ton partage
@TachiOhyo563 жыл бұрын
Bonjour Fabrice Merci de toujours regarder ma vidéo Et merci pour le gentil commentaire, Merci mon ami
@erms73283 жыл бұрын
Buona sera Tachi, grazie del video molto interessante, ma ho da chiederti una cosa, quel profilato di alluminio era realmente chiuso? E tu hai aperto in modo perfetto? Se si allora Devi insegnarci come si fa, ho molti di quei profilati di alluminio ma non sono capace di tagliarli così perfettamente per poi usarli. Sempre con affetto Erms :)
@TachiOhyo563 жыл бұрын
Ciao, Erms Grazie per essere sempre venuto nel mio laboratorio E grazie per il bellissimo commento Era un tubolare a quattro tempi completo, ho usato un bordo di piume sulla sega da tavolo per tenerlo abbassato verticalmente e orizzontalmente e tagliare uno spazio di 6,5 mm. La prossima volta farò un video. Grazie Ci vediamo
Hello Joe Thank you for always supporting my video👍🏽
@user-uq8ei1nj4p3 жыл бұрын
👍👌✋.
@TachiOhyo563 жыл бұрын
Привет Aлександр Спасибо за поддержку моего видео👍
@richardgarioch Жыл бұрын
I found this video useful but what distracted me was how you put your hand on top of the wood going through the table saw while making the cuts for the guide. Appreciate that it was not a through cut but it is not good practice.
@TachiOhyo56 Жыл бұрын
hello richard. Thanks for the great comments. The reason I've been able to keep 10 is thanks to the advice from many friends, including you! Thank you very much. Tachi
@billirey94592 жыл бұрын
Are there any dimensions for this jig? Thanks for sharing this video.
@TachiOhyo562 жыл бұрын
Hello Bill Thank you for coming to my workshop And thank you for the good comments There is no detailed blueprint you want! I now measured with a tape measure (about) 600x145mm rail 380mm I'm sorry it didn't help you perfectly. Tachi
@user-vc8dc1gs1j3 жыл бұрын
👍
@TachiOhyo563 жыл бұрын
Здравствуйте, Евгений Спасибо за поддержку моего видео👍
@ceedig3033 жыл бұрын
strong wrist game
@TachiOhyo563 жыл бұрын
Hello C W Thank you for watching my video And thank you for your comment Have a nice sunday See you
Bello mi piace ma le cornici devono essere piccole peccato
@TachiOhyo562 жыл бұрын
Ciao Tantostanco Benvenuti nel mio laboratorio e bei commenti. Grazie per avermelo detto. Risposta dal Giappone... Tachi
@gailjohnson354411 ай бұрын
Measurements please
@TachiOhyo5611 ай бұрын
Hello gail. Thank you for watching my video. I'm sorry, all of my amateur woodworks are my whims and adventures. There is no measurement.
@williammessenger96374 ай бұрын
Not wasting my time where the content creator is either unwilling or unable to speak and articulate their process.
@TachiOhyo564 ай бұрын
Hi William. Thank you for watching my video. Yes, you're right. I'm not good at English, my woodworking is always my whim and adventure! ! Please understand.
@bowmanj6033 жыл бұрын
you made an elaborate contraption that does nothing. Tell me: are you any closer to making a picture frame after you've wasted time on this? I can answer that. NO! Your mitre cuts 45 degrees without that contraption. AND you still have to measure the length before you use it. AAAAANNNNNDDDD!!!! You don't even know where to measure FROM because you haven't cut out the relief for the picture to sit in. So, why?
@TachiOhyo563 жыл бұрын
Hello About A Boat Thank you for your valuable advice You're right, I'm wasting a lot of time, taking detours over and over and enjoying my hobbies. And my work is a whimsical and adventurous woodworking! My friend enjoys my video. Thank you for coming