Pro tip long extension you can put it through small slot near the headlight so you dont have to use a swivel, also lube the gasket prevent seizing
@BWCDAD5 жыл бұрын
Nice video. 👍 Couple tips I would offer.. I usually crack the seal on the filter housing first and loosen it just slightly. I'll let this sit for 5-10 mins and almost never see any drips anymore when pulling the filter and housing out. Then I drain the oil... With my mityvac 🛢️😉. So nice to not have to lift the car for this anymore. Also I would mention to slip a phone down to the turbo Inlet when you have the intake off and snap a photo of the compressor wheel. Checking the blades every 3-5k miles with an oil change will help detect if you have any overspin damage from boost leaks.
@NGENCustomsandPerformance5 жыл бұрын
Art2Gecko we have a mityvac as well but since most people don’t, we wanted to show people how to do it the traditional way. Thanks for the tips though and thanks for watching the video!
@hugolafhugolaf5 жыл бұрын
Another great vid, good production, no shitty music, no nonsense, straight to the point. I, for one, also rub a little bit of fresh oil on the o-ring of such oil filter housings.
@NGENCustomsandPerformance5 жыл бұрын
Thanks man!
@hugolafhugolaf5 жыл бұрын
NGEN Customs and Performance My pleasure. I’m the one who bought the used DV+/blow off plate/OEM diverter valve combo earlier today, ha!
@sandro14esandro14e5 жыл бұрын
It’s nice to not hear music, was a little surprised there was no recommended torque wrench spec numbers for filter
@re-vision_ Жыл бұрын
@@sandro14esandro14e because it's printed on the filter. 25nm.
@sandro14esandro14e Жыл бұрын
@@re-vision_ correct
@donbeltran305 жыл бұрын
Great video! I really like how they are professional, very informative, concise and to the point. You do great work! :)
@NGENCustomsandPerformance5 жыл бұрын
Thank you!
@anthonysoligo37993 жыл бұрын
I thought you would have cleaned the filter housing. Good video.
@ricardoespiritu88435 жыл бұрын
Thank you so much for this video!! Could you do a video of how to change the manual transmission oil please.
@NGENCustomsandPerformance5 жыл бұрын
I will eventually do a video on that
@jinsaekim5 жыл бұрын
Please make a video how to change 500 Abarth auto transmission fluid for 2015 +
@chrisianiero35115 жыл бұрын
YES, THIS!!!!!!!!!!
@sasazapadnik93353 жыл бұрын
Step 1: sell car Step 2: buy manual Abarth..
@zacharythomas78565 жыл бұрын
So informative thank you 🙏🏾. Keep up the good work!!
@NGENCustomsandPerformance5 жыл бұрын
Thank you!
@pizzamann955 жыл бұрын
I installed a Fumoto drain valve on mine. I connect a silicon hose to it and it drains directly into the oil pan avoiding the lower brace.
@NGENCustomsandPerformance5 жыл бұрын
pizzamann95 always good to make things easier!
@stevenbarnes52203 жыл бұрын
What is the thread size I see on Amazon 14mm 1.5?
@1pfuller3 жыл бұрын
Excellent video.
@robcig2 жыл бұрын
Great video. I’m a big old guy and struggle to get under cars these days. Would you recommend a vacuum extractor to suck out old oil?
@NGENCustomsandPerformance2 жыл бұрын
Extractors work great! I have used them on 500 Abarths and 124 spiders
@JasonSpiffy4 жыл бұрын
Any information on the lift? Nice video by the way.
@NGENCustomsandPerformance4 жыл бұрын
It’s a QuickJack. We have a video on how to rack your Abarth - 2nd video that we did. Thanks for watching!
@txj08024 жыл бұрын
After oil change and after resetting the oil change reminder (gas pedal three times to the floor) Should I mark the oil change with a program, e.g. alphaobd via ELM bluetooth or other?. If not, please tell me when to use this "flagging oil change"- option via ELM? abarth 500 multiair
@stevanaeastwood80593 жыл бұрын
Dope!! Super helpful. Thank you
@bdo30435 жыл бұрын
Great video! Quick question regarding the oil drain plug, can you reuse it! If so, was there a gasket that needed to be replaced?
@NGENCustomsandPerformance5 жыл бұрын
Yes you can reuse the drain plug. I haven’t found a need to replace the gasket as of yet.
@postaraco4 жыл бұрын
Hi, so you do recommend this Pennzoil for Multiar engine ? Thanks
@NGENCustomsandPerformance4 жыл бұрын
Yes we do!
@postaraco4 жыл бұрын
@@NGENCustomsandPerformance thanks for your answer, for my next oil change will go with Pennzoil. So far I've tried Castrol, of course Selenia multiair and Motul and still everything good with mair module.
@greg99854 жыл бұрын
Great vid! Don't you use vaccum device to get oil from top?
@NGENCustomsandPerformance4 жыл бұрын
Sure. That is definitely another option that works well.
@stevenbarnes52203 жыл бұрын
What vacuum device are your referring to?
@declanvillar55574 жыл бұрын
Any info on torque specs? Just bought my Abarth this last weekend. I saw online the filter should be torqued, but I have a hard time trusting that. Seems like it’d break. What about the oil plug?
@NGENCustomsandPerformance4 жыл бұрын
I believe it is 27nm but I never torque them. I tighten the until the oil filter cap is tight. Same with the drain plug - make sure it is tight
@zuesskroph4 жыл бұрын
Any chance we can get a video of the torque solution bumper tie down kit?
@NGENCustomsandPerformance4 жыл бұрын
I will add it to the list
@zuesskroph4 жыл бұрын
NGEN Customs and Performance awesome thanks! The shirt just arrived as well, I’ll now be a walking billboard for your shop lol
@cota_bound072 ай бұрын
Brian, are those intakes good for the weathers conditions here in Texas?
@NGENCustomsandPerformanceАй бұрын
Yes they work great!
@AlphaFlight4 ай бұрын
I wonder what the official fiat steps are for the oil filter is
@streetrunner82733 ай бұрын
Take the engine apart
@ranblank19703 жыл бұрын
Where do you buy valve cover gasket
@NGENCustomsandPerformance2 жыл бұрын
From our website
@kylemsadoques20573 жыл бұрын
Can someone tell me what air intake is from? I bought my car with one and I don’t know where it’s from?
@Danielkianpour4 жыл бұрын
so you are just going let the old dirty oil go back in the sum? as tech I would depressurise the filter first and then drain the oil!
@NGENCustomsandPerformance4 жыл бұрын
The amount (if any) that’s left in the oil filter housing is so minimal it’s not going to affect anything. But sure... to maximize every ounce of oil to drain out of the pan then you would release pressure from the oil cap first.
@operamatthew5 жыл бұрын
opinion on using a thicker oil for heavy hot track days? changing the oil from 10w-40 scares me because of the Multi-air system.
@NGENCustomsandPerformance5 жыл бұрын
I do not recommend using any other viscosity then what the factory recommends which is 5w40
@operamatthew5 жыл бұрын
the assetto corsa cars use 10w-50 but don’t use multiair (i don’t think)
@NGENCustomsandPerformance5 жыл бұрын
Right - different application. I would stick with the 5w40
@operamatthew5 жыл бұрын
NGEN Customs and Performance Motul Makes a 5W-40 300V racing oil. Just hesitant due to the multi-air system.
@and_rew97683 жыл бұрын
Well done, but the best motore oil Is Bardhal 🔝
@billwilson60965 жыл бұрын
You should have oiled the new oring to do this correctly.
@NGENCustomsandPerformance5 жыл бұрын
Bill Wilson it’s not necessary but you definitely can. I have done countless oil changes and have never had a leak at that o-ring. If you change it every oil change, you will be fine.
@whizzo943 жыл бұрын
I have a 2015 Abarth 595 140hp and the handbook says the correct oil grade is 10w50 ?
@NGENCustomsandPerformance3 жыл бұрын
Not sure on the T-Jet engines as we do not have those in the states
@whizzo943 жыл бұрын
@@NGENCustomsandPerformance The engine in your car looks exactly like the one in mine. What model year is your car? My engine code is A3.000 Does your car have a MultiAir engine?
@NGENCustomsandPerformance3 жыл бұрын
1.4 Multiair. In the North American market, it calls 5w40. If your application in your owners manual calls for something different where you are at, then follow what your owners manual says.
@whizzo943 жыл бұрын
@@NGENCustomsandPerformance My apologies, I just assumed that the engine in your car was the same as mine.
@piki564 жыл бұрын
Brian, take your watch off while you work on the car
@NGENCustomsandPerformance4 жыл бұрын
Lol ya I normally don’t wear a watch when I work on a car but it’s just an oil change