Oil Filling a Watch:How to tutorial. SO EASY!!!!

I took my Mathey-Tissot Quartz Watch and filled it with 100% Silicone Oil with a viscosity of 50. I found the oil on ebay(search the brand label seen in the video). The overall project took about 15 minutes. It was extremely easy and came out wonderful the first time. No bubbles in the case, no bubbles under the crystal near the dial, completely filled in again super easy.
Patreon:
www.patreon.com/allthingsrandom

[@thomasstratford6227]

Great! I just watched a video of an oil filled Pulsar quartz! No damage to 800 Bar! Now I know I can dive to nearly the bottom of the Puerto Rican trench ( 24,000 ft ) with no worries!

[@allthingsrandom8137]

You know it’s funny that there are two points of view from this video(I also just did one on the vaer solar diver) and you either love it or hate it. Not sure why people hate it

[@pedrosardinha3711]

I can only imagine what a pain in the ass it is going to be to change that battery later XD

[@messiahjustin1964]

I know Im randomly asking but does anybody know a way to log back into an instagram account..? I stupidly forgot my account password. I would love any tips you can give me.

[@messiahjustin1964]

@Kylo Fabian thanks so much for your reply. I got to the site thru google and Im in the hacking process now. I see it takes a while so I will reply here later with my results.

[@messiahjustin1964]

@Kylo Fabian it did the trick and I finally got access to my account again. I'm so happy! Thank you so much, you saved my account :D

[@kylofabian4579]

@Messiah Justin You are welcome :D

[@blueissocool]

After a year of doing this to a couple of watches, they all stopped running. They were quartz watches. I did it to 6 watches of different brands. Some leaked little by little, and they all stopped eventually. I absolutely love the look, but they stopped. So I stopped doing it to the new watches I bought. I did try to change batteries on them, nothing.

[@allthingsrandom8137]

I get it. I never had a problem leaking for changing the battery in the Mathey. Here’s a link to show about 6 months later. I compare it to another non-oil watch. Both changing the time as well as water resistance. I’d say try again… kzbin.info/www/bejne/Z5WYpJ1vd5mYaJI

[@Rr-j4x]

you put oil on quartz watches? oils are meant for automatics

[@Wayne-nb8wz]

Don't do it. It screwed up my Casio Duro. Slowed time, Leaked, Messy, Overall effect not worth it!.

[@jusuftheeagle6772]

What oil did you use?

[@xyz12three]

still no answer :)

[@nicknameless5581]

Olive oil💀

[@paulovinicius3545]

Coconut oil

[@NPC-et9ik]

Grapeseed oil

[@sootys4024]

I did a couple of these oil fills on cheapo casios I got to practice dial customization and some other mods. They look brilliant but I was worried about the battery life so I ran some probes into one of them and found the current draw was 3-4 times higher after the oil fill as the movement has to work harder to keep time. This means a three year battery will last about 10 months in 50ct oil. Also make sure the crown is fitted but in the out position as you tighten the back otherwise the hydraulic pressure that can be caused as the back closes can pop the front glass off!

[@allthingsrandom8137]

Sooty S great points to know, especially the battery life

[@sootys4024]

Couple of months on and the dial prints have faded quite a bit faster than I would have expected. They were cheapo transfer types rather than tampo prints (these were just trial pieces) but I would had be expected years not months before fade became noticeable. I wonder if the oil dissolves the inks?

[@RockandrollNegro]

Silicone oil is 'minimally reactive,' meaning the likelihood of stripping dyes and paints are minimal in relation to mineral oils. However, this doesn't mean that it's 100% non-reactive; as an oil, it's eventually going to strip and fade any reactive dye (ie, 99.9% of colored dials and markers in watches.) This is why you don't see anyone doing these to expensive watches; the hydromod began as a purposeful mod done by divers in the fifties who couldn't afford a Fifty Fathoms or Rolex, and needed to quickly increase the density of a minimally waterproof cheap watch like a Timex or Caravelle in order to use once for a deep dive. Afterwards, the watch got tossed, as it was now basically useless for everyday wear.

[@sootys4024]

Marvin, I agree. After the faded test dial last year I got curious... I made up about 30 vials and put a bit of brass with a different combination of dial printing type in each, with various fluids. Transfer print, sublimation print, acrylic paint, enamel paint, different undercoats, lacquers etc. Some vials got silicone oil, some got flourinert, some just air. Left most in the sun, hid some away as controls. Learnt a lot. Main takeaways were that silicone oil accelerated fading in sunlight but made no difference in dark. The transfer inks performed worst, then acrylic. Sublimation wasn't affected and was still looking as good as the control a year later. Enamel was fine as were quality artists acrylics. Put some lume on some of them and found super luninova changed colour a bit when it got wet but still glows fine. Glow in the dark plastic was unaffected. If you are doing this, either punch dial markers from thin sheet or buy ones with glow already in them and it'll look great. Also flourinert caused less fading but it's horrible and escapes from pretty much any enclosure. It will certainly get out of normal crown seals over a few months and will pass through some plastics and rubbers. I suspect the vapour is nasty. Not for mods - don't go near it unless you are making a metal case specifically to contain it.

[@roadshowautosports]

@@sootys4024 yes, it does.

[@sumejakalem4748]

i have few and will buy more watches on rolex.poker

[@jimsheldonswe7846]

I can’t see a reason to do this. Does the oil thicken if it gets cold.

[@robertcaldwell2994]

Seems like a bad idea. What's it like when temperature falls below room temperature?

[@allthingsrandom8137]

It’s not olive oil…. Nothing. You could argue maybe -20 degrees. Anything above 30 degrees f, is fine

[@ryanblake4790]

What would you think about filling a quartz seiko ssc701? Also does anybody know how a seiko mechaquartz would work out with flourinert?

[@nickknight8065]

+

[@lamas92]

In digital watches, ok. But when you put oil at the movement, the some parts needs more power to slide. Yes, the battery will shortly end and the accuracy will not be the same... Talking about dive, the watch with oil will increases the limits!

[@iambetterksa2566]

I think a really cool vid idea would be trying to build your own custom watch (not an homage) from parts on the internet. Would be awesome

[@melody3741]

I did this but it was still sort of an homage in a way because the dial was the big pilot style.

[@jayelwin]

Would leak out when you pull out the crown to set the time?

[@allthingsrandom8137]

No, there is an internal gasket. What the video below, I go through how it doesn’t leak in real time kzbin.info/www/bejne/Z5WYpJ1vd5mYaJIsi=Rv7sryjJ7wMmQr3G

[@strinity511]

I do it to digital watches like the Casio AE-1200 and 1300. I also use 1,000 cst, which means no leaks and better water resistance.

[@nickv4073]

Get used to changing a lot of batteries through that oil filled mess. You are going to cut down batttery life by 70%.

[@allthingsrandom8137]

So far I’d say 30%. A three year battery has lasted about two years.

[@extradimensional8818]

Why destroy a watch and half its battery life at best' am I missing something🤔 if it is such a good idea why don't high end watches sell oil filled watches🤔 it's simple because there is no point in doing it.✌️🧐🇬🇧🇺🇦

[@brianmsahin]

A question. Should a mechanical watch have a screw down crown to be suitable for oil filling ?

[@allthingsrandom8137]

No mechanical watches. Only quartz

[@brianmsahin]

@@allthingsrandom8137 Ah, that makes sense ! 😂 Thanks!

[@watchitsell]

I'm confused. Is it a screw down crown? If not, oil doesn't come out?

[@allthingsrandom8137]

It is not a screw down but offers 50 meters for water resistance. Here is a link where I show all the functions showing it does not leak kzbin.info/www/bejne/Z5WYpJ1vd5mYaJI

[@mbciuso]

What about when you have to adjust the date or set the time?

[@allthingsrandom8137]

I do this very thing a year later after having the watch. Watch the video you’ll see me do complete functionality setting the time and it has never leaked once. kzbin.info/www/bejne/Z5WYpJ1vd5mYaJIsi=7epJ1zv9Gl3i0Qr_

[@gman8877]

Any update to how this affected your watch long term? :)

[@allthingsrandom8137]

I have changed the battery. Nothing other than maybe a shorter battery life. I have a Vaer dive watch in route, solar quartz, which I am reviewing then re-doing the oil filling video. It’s older and needs updating. But the solar is to make sure the battery never has to be changed.

[@The_Touring_Jedi]

I can understand proffesional diver doing this...but someone that goes to 30meters depth makes no sense at all.

[@allthingsrandom8137]

Cool factor

[@Venom89062]

Sooooo....what happens when you unscrew the crown to change the date?

[@allthingsrandom8137]

kzbin.info/www/bejne/Z5WYpJ1vd5mYaJIsi=Ei1ahcO2kjHrBstN

[@allthingsrandom8137]

Nothing,

[@seanhickling7340]

I don't get it. If you want that kind of look without potentially ruining a watch just get a Galaxy watch 5 or an apple. The watch community apparently despise smart watches but still want their watch to look like one 🤷‍♂️

[@allthingsrandom8137]

Most people don’t despise smart watches. I want a Garmin descent mark two. Because it’s a dive watch. But I’ll never own an Apple Watch, or another smart watch, because it’s like having a second phone on my wrist. People right now are bad enough always checking their phone, it’s even worse and more annoying with everybody checking the wrist. There’s a lot of reasons to add oil to a quartz watch. really just comes down to a coolness factor. You either get it or you don’t.

[@jstrat121]

Looks like a great way to ruin a perfectly good watch….I dont see the practical point in going thru this mess……so I wont.Amazing how that works,lol.

[@allthingsrandom8137]

Nothing was ruined in my watch. Works great… So yeah….. increases water resistance, increases legibility… cool factor 🤷🏻‍♂️

[@Human_2.0]

Use Florunite oil not silicone oil. It is runnier than silicone plus silicone oil will turn everything yellow overtime including lume.

[@Strideo1]

Thanks for the tip.

[@Williamchan87]

when i read the name, I thought you might use an automatic watch, and I was like woah that sounds crazy, but its a quartz :|

[@allthingsrandom8137]

Yeah. I already know what would happen with an auto, which is a mess. And I’m not a quartz lover, but man that dial looks cool as hell

[@Williamchan87]

@@allthingsrandom8137 well I was just wondering maybe you some how got a auto to work with oil and that would be cool

[@allthingsrandom8137]

Williamchan87 trust me, I so wanted to do the same thing. We’re in the same boat

[@Jorj57]

auto can't be hydro modded, since it has a tons of moving parts, and especially the oil will give the balance wheel a lot of friction

[@AlessandroGenTLe]

@@Williamchan87 I think by now the only ones who managed to do this are the guys at Ressence, but at 20k$ minimum they're not exactly cheap... Plus the movement is well separated by the oil filled part and (if I remember right) the motion is transferred from the movement to the oil filled part with no contacts (magnetically)

[@rongrosstube]

The 24 hour bezel is a mistake sent by DIY and has no function without a 24 hour hand. Should have sent you a 12 hour or minute bezel.

[@allthingsrandom8137]

That’s not necessarily true. An additional 24 hour hand, like a gmt Ads a third time zone, not a second. So using the 24 hour bezel, you can adjust a second time zone using the standard hour hand.

[@CapitanHarlockisback]

You should do it with a Rolex.

[@allthingsrandom8137]

🤣

[@MrRahimhosein]

Umm I gotta ask. Arent you going to have to redo this every time you change the battery? That kinda sucks.

[@allthingsrandom8137]

Check one of the most recent videos I did, oil filling a vaer solar. So you don’t have too

[@jasonemanuel9070]

You can also add different colour dyes to change the colour of the oil😊

[@AnthonySmith-sc4zs]

Looks so cool! Seems like you’d want a container that you can turn the watch on its side to let the bubbles out.

[@allthingsrandom8137]

When I changed the battery recently, I just filled a small container with oil and changed everything underneath to avoid bubbles in the future. It was pretty easy.

[@fastpace386]

It's the first I'm seeing this. What is the reason for doing this? Does it not ruin the watch in the long run??

[@fweddyfwintsone4491]

Did I miss something. You don't explain why you would do this. What is the benefit of doing this? Would this not cause a problem when you press the button - ie: a Casio?

[@allthingsrandom8137]

It helps in a few ways, not only does it project the dial on the inside of the crystal, making it easier to read, underwater, and easier to read above water, but it also improves of water resistance rating of your watch As the viscosity of the oil is heavier and more dense, it makes it so water can’t intrude into the case And there is no leakage whenever you change the time or use a button.

[@fweddyfwintsone4491]

@@allthingsrandom8137 Thank you for your reply Sir.

[@kingpin2105]

Turns out nice but i don't think I'm gonna do this to my precious watches....

[@allthingsrandom8137]

Which is why I chose a $100 watch…

[@gregspitz5246]

Better with solar watches so you don’t have to change batteries and fill it again

[@allthingsrandom8137]

Great point

[@Tom_H327]

I have reservations about doing this to one of my watches. My collection is small and I saved up to get what I got. Not sure I want to gamble on my abilities or whether the watch movement can handle this mod. Also, I'm not sure what the point is, I'm not a saturation diver, but to each their own. Have fun. 😂

[@jamtedd]

When you're adjusting the time does any oil leak from the Crown?

[@WatchGuyJive]

James Barrie I was going to ask the same question.

[@psanto13]

Yes.

[@rehakmate]

@@psanto13 If it has a rubber gasket, no. If water doesn't get in, oil doesn't get out.

[@chingsok]

Here is the answer kzbin.info/www/bejne/qYvOo51-frOni5o

[@MJRusso2]

@@rehakmate Water WILL get in when the crown is out for time adjustment. They always say always ensure the crown is secure before allowing the watch to get wet.

[@dude1diligence]

Does the viscosity of the oil affect longer term time keeping accuracy?

[@allthingsrandom8137]

Not that I’ve noticed. An argument can be made it may take the life of the battery down a few months. But is it the oil or the battery? As for the accuracy, I haven’t noticed a real change

[@dude1diligence]

@@allthingsrandom8137 that’s interesting. Thank u for thr reply. Yes, I later came across the battery life comment too. Interesting. It seems quite a deal breaker if it were only 10 months after all the hassle and rinse n repeat. But good experiment and also historical use for scuba. I’ll be trying it on my Patek for tomorrow’s dive.

[@Pehr81]

Is that a sapphire crystal?

[@allthingsrandom8137]

Domed mineral

[@Pehr81]

@@allthingsrandom8137 would this mod work with sapphire?

[@allthingsrandom8137]

@@Pehr81 here is an oil filled Vaer with a flat sapphire that I did a few weeks ago kzbin.info/www/bejne/d4mlonmlaLN9e9Usi=I-wzpQUU7QaYDqSG

[@philhounam523]

Maybe just buy a U-Boat. I did, I bought the cheapest one in their range because I liked it the best. I’ve changed the battery once via the cover of the separate battery chamber. The clarity of the watch is off the scale and with the expantion bubble you get a free spirit level. I’ve never owned a watch that has recived so many comments, I love it.

[@jlr8356]

Wow: This is a awsome trick to destroy your watch. Use of methal pliers in a quartz movemencis a sure way to damage electronics in your watch. It us evident that you dont know neither respect a watch movement….

[@plumtiger1]

I'm glad you checked it for accuracy, but it just seems like the increased viscosity would slow down the watch. Any long term results on this? I love the look!

[@allthingsrandom8137]

Watch needed a battery change about 2 years in. I recently did the same thing to a Vaer Solar dive, check it out on the channel, so a battery change is not necessary

[@myleskandalaft2424]

I am seriously considering doing this to my CWC royal navy diver. Have you noticed any drawbacks to doing this yet?

[@allthingsrandom8137]

Nothing so far, I really love though the way the Dial image pushes out against the curved crystal. I am still considering getting a 200 m diver and then doing the same thing

[@monkelover2056]

Apparently using silicone oil turns the lime yellow, however others use a another oil which doesn't do that and more runnier but is like 40 dollars per bottle

[@Absolute_Unit135]

This, plus a nice AR coated sapphire crystal for zero glare

[@markifi]

is there an alternative oil that can be used? microlubrol or even fluorinert fc-40 is hella expensive to buy and also difficult to find

[@danielcwk3803]

Sure, now try to set the hour pushing out the crown

[@allthingsrandom8137]

I did in this video, there’s no leaking, no issues. I also show the watch underwater, because the oil also makes it more water resistant. kzbin.info/www/bejne/Z5WYpJ1vd5mYaJI

[@1sinister80]

Vacume chamber ? Maybe get all bubbles out.

[@allthingsrandom8137]

Just simply submerging it seemed to work. I got no bubbles

[@LaithFaouri]

What's the point you can even pull the crown to adjust the watch ..

[@allthingsrandom8137]

kzbin.info/www/bejne/Z5WYpJ1vd5mYaJI All then way. It’s an internal gasket, so there’s no issue. Here’s a video where I actually just the time six months after it’s been filled

[@LaithFaouri]

Thank you that's was what I'm wondering about 👍🏼

[@davids8449]

Good idea.....in an emergency of national crisis ...you can always open the watch and use the oil to fry an egg ...... would not do this to my 30 year old quartz watch very silly idea

[@deegun338]

Did this yesterday with a similar mathey-tissot I already owned and came out great.

[@allthingsrandom8137]

Great to hear!

[@wiegehtsdenn1234]

Why does the oil not interfere with the battery/electrical system of the watch?

[@allthingsrandom8137]

Because the oil is a non-conductive oil. You can either use a ferrite oil or a silicone oil. All of which does not conduct electricity.

[@kingkong81icloud]

Can you convert a automatic to Quartz movement , because I have a broken omega seamaster 007 clone an I want a Quartzmovement in it

[@allthingsrandom8137]

Most the time, 99% of the time the case is the exact same. The only thing you have to be careful of is the movement holder, and the movement crown stem being the right length. Everything else should line Up just fine

[@d8ma663]

That watch wont last much longer

[@allthingsrandom8137]

Just changed the battery. So I got another couple years

[@dblake1947]

Awe some…..

[@CCPwillfall01]

bro quit ruining watches

[@allthingsrandom8137]

Well, I’m doing this again in about three weeks with a more expensive watch and one that is solar powered so the battery never has to be changed. And it’s not gonna ruin it, it’s gonna give it better, water resistance, and more legibility.

[@robertmontgomery7133]

Bet it's a real mess when you need to change the battery.

[@allthingsrandom8137]

True, but that’s a few years away, LOL.

[@carlmason983]

@@allthingsrandom8137 you will not get years out of a battery we're talking months because the battery will have to work harder.

[@allthingsrandom8137]

Carl Mason remains to be seen. Mines still on time and it’s been 6 months since the actual casing in oil

[@DUZCO10]

Luminescence glow shot???

[@radiocontrolled9181]

I find this so stupid. Why should you fill a watch that was designed to operate dry and in air with oil? And does the oil really not affect the time keeping? Does the oil not cause resistace to the second hand, making it go slower? I would never do this just to gain any aesthetical advantage. Not to mention the mess each time you need to change the battery. To each their own.

[@allthingsrandom8137]

Well, I did a follow-up video where I compare it to a standard dive watch and how it’s better. For instance, it gives better water resistance than a watch filled with air. The change in the timekeeping is so minuscule that it’s not noticed. I also did a different video with a solar movement so the battery would never have to be changed. So, as stupid as it is, there is more than just aesthetic looks

[@thegorn]

Try filling up a Rolex with vegetable oil I'm sure it'll work a treat!

[@harveytrevino2257]

It looks great. Wow, I never knew this was a thing! Subscribed.

[@allthingsrandom8137]

Thanks!

[@garen2517]

Херня! Не делайте так с часами имеющими секундную стрелку. Секундная стрелка встречает сопротивление масла, двигается с затруднением, и часы отстают. Я заливал масло различной плотности, сразу отставание часов заметил при заливке масла вязкостью в 100 сСт, далее я заменил масло на вязкость в 5 сСт, и часы всё равно отстают. (на меньшее время, но отстают) Короче - заливка масла подойдёт если вы заливаете его в часы БЕЗ секундной стрелки, или в часы с электронным дисплэем.

[@michaluebi4038]

Better use 10 or 20 CTS silicone oil, battery Last Longer !

[@scheier3]

I've got a MT rolly GMT, I would be terrified to fill it with oil. But It does look great though, especially with that crystal. I think on the down side, youre going to have a messy battery change

[@allthingsrandom8137]

To be far, as easy as the process was, if only once every two or three years? No biggie. I only wish I used the dive watch Instead of the one here

[@melody3741]

Please do not ever do this on a mechanical movement like a rolex PLEASE

[@a0r0a7]

@@melody3741 apart from the fact this in time will possibly destroy the quartz movement and the seals in this watch. This is not a technique for any mechanical watch, would love to see the hair spring on the balance operate, rotor and gear train operate if anyone did 😂🤣

[@Strideo1]

@@a0r0a7 I have doubts a mechanical watch would even run at all once submerged in that oil. Why do suppose this would ruin the gaskets though? Many rubber gaskets actually get improved longevity when regularly exposed to light oils.

[@a0r0a7]

@@Strideo1 Of course a mechanical watch would not run. A sticky hairspring because of oil on a balance will make a mechanical watch run super fast or not at all. As for the gaskets, depends on the oil used.

[@Watchwist]

what will, If I want to adjus the date or time, will Oil will be leaked?

[@khronosbest9448]

Looks good but I’d like to see it before and after on a timegrapher.

[@1millionstartups]

I think Sinn can have my money if I want an oil filled watch (and I do).

[@bslbsl6040]

Hi, i have a blancpain villeret 40mm watch in stainless steel 2 years old (2020) watch and i noticed that it is stiff when i try to wind it. It has 72 hours power reserve. Example: When i wind it, it is tight.. I have to pull out the crown then i have to push it back in, in order for it to be buttery smooth when i wind it. It keeps excellent time BUT it is just stiff/tight if i wind it without pulling out the crown and pushing it back in first.. feels like resistance.. Any idea on what could it be? I dont have warranty. My jlc reverso is so smooth , i dont have to pull out crown and push back in for it to be smooth wind. Do you think with silicone grease on the crown seal/gasket will make it better?

[@allthingsrandom8137]

I don’t think I would do anything that I wasn’t 100% sure of. The gasket may be dry and that’s why it’s resistance when it’s pushed all the way in. A little silicone is not gonna hurt, Just be very conservative about the amount you use

[@byteme9718]

"i have a blancpain villeret 40mm watch", No, you have a fake. That's why you say later "I dont have warranty." You liars are so easy to spot.

[@andytaylor6402]

Can you do this to an automatic homage watch? Like one of those homage Rolex with a Miyota 8015 movement ? Any thoughts 💭? Thanks 😊

[@allthingsrandom8137]

I would not. The oil will slow the balance wheel and make it non-operational. Only for quartz!

[@2WheelDerness]

@@allthingsrandom8137 batery life will decrease a lot if filled with oil?

[@melody3741]

NO!!!

[@rongrosstube]

Dumb question: What is the function of the 24 hour pepsi ring with no 24 hour hand?

[@allthingsrandom8137]

You can technically time an additional time zone without a gmt function. The standard hour hand acts as the first time zone, the 24 hour bezel can then be adjusted to should an additional time zone either ahead or behind.

[@maf6085]

One question: Just Why to screw a beautiful watch!!

[@WoodesosGuitarMods]

I just did this and yes, it so easy. I did the Casio and it looks amazing. Thanks for the tutorial. (mine's been running fine a few weeks and I used mineral oil for cutting boards.)

[@justinbailey6515]

Having some experience using mineral oil for PCs, I would advise against it. Mineral oil will make any plastic or rubber components brittle over time and will accelerate the eventual destruction of the watch. I do not have experience with silicone oil so cannot say it's long term effects.

[@stephken8077]

It would be interesting to see how deep the watch could go in a pressure test now it's oil-filled.

[@spinnanz]

In theory, there is now no limit to how deep it can go as the oil doesn't compress like air does.

[@andhieyusuf7008]

Behind the Press tested one. It surpass Vostok Amphibia, but the back case bent inwards and some oil leak out.

[@4godandcountry663]

It was first designed for deep diving

[@davidellison4750]

The quartz crystal is in an aluminum can. That can will be crushed at depth.

[@Shiftingto4Low]

I have seen test video of watches under water deeper then 940m for over 2 weeks!

[@herberar]

I would only use extra virgin olive oil,in case of a salad emergency.

[@allthingsrandom8137]

LOL

[@hugoturbill6067]

hahaha definitely dont do this to any watch worth any money or an automatic.

[@Livingreciever]

I'm a massive watch lover, and had NO IDEA this was a thing. nice video, proper interesting.

[@antonioandaya6856]

So how did this hold up? Is it still in good working condition? When you pull out the crown no oil leakage?

[@allthingsrandom8137]

No leaks and is still running good. I know I’ll have to changed the battery eventually, but it’s been going with no issues for over a year

[@antonioandaya6856]

@@allthingsrandom8137 thank you for your kind response.

[@LajosKormos.]

just wondering if this mod would improve legibility of a white dial/golden hands combo? thank you

[@allthingsrandom8137]

Yeah, it’s gonna improve the legibility of any watch. I am doing this video again with a solar watch and updating it. Stay tuned. It’ll release in a couple weeks

[@LajosKormos.]

@@allthingsrandom8137 thank you. solar with analog dial or digital display?

[@softmetals3702]

i got some old shittas invictas i can try out looks boss

[@xyz12three]

looks awesome. might do it with my citizen quarz

[@graybard8640]

My OCD is going insane looking at that bezel

[@wiegehtsdenn1234]

This can only be done to waterproof watches, correct?

[@allthingsrandom8137]

Define water proof. Every watch has a level of waterproof resistance. My recommendation is 50 m and you’ll be fine. Even if you choose a watch that is a timex for example with only 30 m of water resistance, it would still work

[@roadshowautosports]

So, the reasoning on doing this it’s only for the looks? Any other improvements? Thank you!

[@allthingsrandom8137]

Basically just looks, but it does increase the water resistance rating quite a bit. Water intrusion is basically impossible because it’s filled with oil which is far more dense

[@roadshowautosports]

@@allthingsrandom8137 understood. Not for me though. Appreciate you sharing.

[@byteme9718]

@@allthingsrandom8137 £50 buys me a Casio Duro waterproof to 200 metres. Few divers go much beyond 30 metres.

[@holdenafart7372]

Does the oil come out when u pull out the crown to change the time

[@allthingsrandom8137]

It definitely does not, I will leave a link to a video where I compare it to a normal watch and I go through all the functions and you can see that there’s no leakage at all kzbin.info/www/bejne/Z5WYpJ1vd5mYaJI

[@soundmindtv2911]

Every horologist and watchmaker who understands what it takes to make a watch that keeps time is cringing and mourning right now

[@allthingsrandom8137]

That’s not true. These can be used on mechanical watches, and a watchmaker isn’t going to cringe. Especially an oil filled quartz movement that gives it better legibility and water resistance when actually used.

[@soundmindtv2911]

@@allthingsrandom8137 absolutely not. The hairspring inside a typical mechanical watch that regulates the time cannot function submerged in oil. In fact, even a small amount of oil getting between the hairspring spirals will throw it off by magnitudes. Not to mention the balance wheel itself trying to overcome the drag of being submerged in fluid. An escapement could surely be purpose designed to operate submerged in oil, but no typical escapement that is not designed for it will function. And as you've seen in the other comments, even a quartz watch will draw 4X the current from the battery to overcome the drag, which means every conductor is carrying 4X the current it was designed for. Which is why the lifespan of the movement is cut short and will burn itself out, as other commentators have noted. So,,,, nope.

[@bradleypariah]

Itself came out itself good itself itself.

[@morriemariani9646]

Jesus...since when this become a thing!

[@JasonTheWatchGuy]

Going to attempt my first one of these on my Casio MRW200H next week! Hopefully it turns out as well as yours!

[@gmansplit]

Did you try it?

[@Strideo1]

@@gmansplit Did he try it?

[@allonsypyrenees]

Can you let me know if you use the crown Will oil leak out 4:28

[@geninchuni]

@@allonsypyreneesit depends on your watch and how thin is the oil you used but just to be sure adjust the time with the crown pointing upwards 😂

[@filipusnainggolan8530]

@@Strideo1 did he did told you that did he did it or not?

[@jna1316]

u- boat make a watch with oil inside like this :)

[@allthingsrandom8137]

jesper andersen except this one is a hundred bucks..

[@marioalfeucarvalho6133]

Should be better to leave a little ar bubble to alow oir to expand when hot ?

[@chingsok]

Mário Alfeu Carvalho kzbin.info/www/bejne/qYvOo51-frOni5o

[@ckkbleev]

It's gotta be a royal pain to change out the battery now...

[@allthingsrandom8137]

Honestly, it’s easier than putting in the oil initially. Because as long as you keep a watch completely submerged, when you’re disassembling to place a new battery in it, there won’t be any more bubbles

[@ckkbleev]

@@allthingsrandom8137 ohh ok I didn't think of that. I was thinking about all of the fluid leaking out and having to refill.

[@byteme9718]

@@ckkbleev You have to top up the oil before putting the case back on. The pain is having the oil and changing the battery frequently on any watch with a second hand.

[@deaftodd]

It looks very cheap watch.

[@davidellison4750]

It would be interesting to do it on a solar watch and see if the solar cells still recharge the battery. Also if the watch includes a small LCD display, can that LCD still be read?

[@allthingsrandom8137]

Solar works fine. I did it with my buddies citizen. LCD screen is unaffected so it’s read fine

[@byteme9718]

It improves LCD displays.

[@dans364]

Would this work on automatic watches?

[@allthingsrandom8137]

Negative

[@kathleenbrosnan528]

I found a watch in the dirt it's a psycho very old and I put a battery in it after I cleaned it up now it doesn't it doesn't take should I put oil in it or I don't know what to do

[@paulvon2378]

A before and after would have been nice to show the difference.

[@thegorn]

Before and after is all in the video

[@jasonbiernat2944]

Awesome! Thank you!!

[@wotanlau6099]

I am considering doing it myself but I am concerned about one thing--- when you unscrew the crown to change the date or something, will the oil leak？

[@allthingsrandom8137]

Wotan Lau The one I used actually doesn’t have a screw down crown, it has a gasket around the crown stem, so it doesn’t matter if it’s pushed in or pulled out to change the date it’s still fine

[@alienivan3772]

I was asking myself the same question since 50m water resistance with a push-down crown is on the low end as a diver. Thanks for the question and answer

[@angrymoose3383]

Yeah. Great. Until you need to change a battery or get it serviced if it’s a mechanical

[@k2horology]

Does oil spill out when you unscrew the crown?

[@allthingsrandom8137]

Kevin Kuntz in this video I actually show when you unscrew and adjust the time nothing happens. It’s a little more than halfway through kzbin.info/www/bejne/q4LdhpR6atVsqLc

[@mk35711]

I had never seen somebody doing something so stupid with his watch. This watch isn't gonna work for long.

[@allthingsrandom8137]

Maroš Kamenický it’s worked for over nine months now? What are you talking about? Clearly you have zero understanding of electronics but I won’t hold that against you.

[@1962hellen]

That looks amazing!! Thanks for the video, made a subscriber outta me.

[@allthingsrandom8137]

1962hellen thanks!!