Okuma Lathe Programming Guide - Turning Cycles

Hartwig's Ricky Hochecker discusses Okuma Lathe Turning Cycles in this interactive training session that was recorded on July 28, 2020.

[@jagankandukuri6039]

Hi Ricky. I think,In screen shot of 'using I& K to define arc centre' for g03 i,j are to be negative sign. Thank Jagan

[@5axisprogrammer16]

Please Help O.D. threading cycle. Is it possible to make it simple? I am used to using box threading cycles on fanuc controls. Can I do that on my OSPE-100L control?

[@dariusconnoley4022]

X is minor diameter Z is length D is depth of cut U is finish H is height difference between minor diameter and od

[@ryanrosser8520]

Can you get the conversational program on a desktop or a program simulator for Okuma on the desktop? I want to check programs in the office before I take the machine out of cycle on the shop floor. I hate stopping production to check a program.

[@HartwigInc]

Hey Ryan- one of application engineers can help you with this as this is offered, but I'd need your info first. You can e-mail [e-mail] and I'll get it over to one of our engineers.

[@ryanrosser8520]

@@HartwigInc thank you for the reply sir. That's great it's something you offer!

[@official___engineer01]

Sir please upload this vodeo in hindi language

[@erickp9980]

I am a college student trying to crunch out a few codes for finals. This video helped me so much with understanding Okuma cycles and programs, as I knew nothing on how this code system worked until yesterday. I have actual faith I might pass. Thanks!

[@HartwigInc]

hope you passed?

[@bigbattenberg]

Mr. Hochecker, thanks for your presentation skills which are second to none. Clear, concise and unambiguous. I am glad we have Hypermill also for turning (which I am in the process of learning) as well as post processors for our Okumas, although I also have to learn how to operate them physically.

[@matthewturchan6286]

Why did u three that way

[@br1ckify]

27:55 ...dont you a have machine status variable that you better could call up at this point to replace that X-.whatever , with maybe X-[#9494*2] ????? in this way you cant never goof, infact u loose cylce time if predrilled

[@jagankandukuri6039]

Sorry G03 , I & K

[@br1ckify]

35:21 .......so G40 cancels also the before called T010101 X and Z length comp, not even the noseradicompensation, right ?!

[@br1ckify]

13:02 ...... the F value has 2 deltas ....does it set what i desire, the designatet feedrade for this cornerrounding ?!

[@life.is.to.short1414]

Even this is old but i learn alot for running this machine..

[@IskraChispas]

And if i want make polygon can i use same cycle Like in this example: G90 G95 G50S1000 T080808 G0X650 Z5 M110 M146 M16 G0 X42 Z5 SB=1000 M13 G85 NAP1 D1 U0.2 W0.1 F0.1 NAP1 G81 G1 Z-10 G101 C300 C240 C180 C120 C60 C0 G80 G0X650 Z5 M12 M109 M30 Is there another cycle format for this type, becouse i get alarm on this format?

[@Andytpks]

You can't use SB=XXXXM13 and M110 with G81 and G85. You have to use other cycle.

[@kapitandoopa5021]

43:30 Why there is G42 command instead of G41? In that boring operation tool is on left side of programmed contour

[@АлександрСухов-н1г]

Все верно, тоже заметил эту ошибку

[@jcwarrior3165]

How do you use M695/M694 to prevent shatter?

[@5axisprogrammer16]

I am new at Okuma lathe programing. So i am using some basic stuff from programing on a fanuc controller. I am getting and error on my safety block like when I try to run the program. I just purchase a used Okuma captain L370 MFG date 2001 with an OSP-E100L controller. Safety line has a G40 in it and it seems to not like that. Now I can not get past the safety line. Also I removed all the radius compensation out of the tool offset page.

[@5axisprogrammer16]

if anyone can help that would be awesome. Some weird nose radius alarm.

[@cwhite9295]

Thank you for this video. I have been promoted to CNC Programmer at my company, and we just purchased 2 new Okuma LB3000EX-II machines. I've been screenshotting slides, for personal reference, to my documents file at work. I am unsure of the legality of anything past that, and I would like to create slides to post at the machines themselves, in order to help the operators. If I can be emailed that information, and what I would need to do, in order to not break any copyright laws, or any such thing, that would be great!

[@HartwigInc]

shoot us an e-mail to [e-mail]!

[@balajijayaraman6333]

I need this slide

[@АлександрСухов-н1г]

Вы же не использует эту информацию в личном получении прибыли

[@rajukumbapur5084]

Hi sir threading cycle explain

[@liuxin802046]

hi Ricky, for boring cycle I think we should use G41 instead of 42, right?

[@mystifiedoni377]

Typically, when going in the Z negative direction (ex. feeding from Z0 to Z-1), G42 is for turning and G41 is for boring. It's more complicated than that but that's the rule of thumb I use. If you're ever unsure, simulate or dry run the cut and watch the numbers to see if the X and Z values don't go far off from what you're expecting. As getting them wrong can cause an oversize or undersize of 0.1" or more!

[@5axisprogrammer16]

Can I use only t0101 call out if I program with out nose radius compensation?

[@kuei1215]

yes

[@5axisprogrammer16]

@@kuei1215 Thanks.

[@tlploversofficial2140]

Please send okuma book I need

[@JorgeHenrique-dt1zv]

Good job. Thanks

[@komitoffon5568]

good video

[@komitoffon5568]

do you have a book for this?

[@HartwigInc]

Hey Komi- shoot an e-mail to [e-mail] and I'll get you in touch with Ricky who shot this video

[@jaimecamacho653]

Hi do you have book for this thanks I appreciate a lot.

[@HartwigInc]

shoot an e-mail to [e-mail]. Thanks!

[@jaimecamacho653]

@@HartwigInc Hi, Sr I am not a professional in this position , can you help me. Like new student with 62 years old and never do this. Working 11:00 pm to 7:00 am full time. Thanks

[@HartwigInc]

@@jaimecamacho653 send an e-mail to that address and will see if we can help!

[@jaimecamacho653]

@@HartwigInc Hi Sr my address emai is [e-mail] this is you ask me. Thanks