All that work for something that is still trash. The only thing they changed is now it is shiny. What a waste of time and effort.
@quickcinema8031 Жыл бұрын
No, the inside cylinder block ball bearing is replaced with bigger one. They have stockpile of shiny used bearing with various size to get into the bearing. This is the real green recycling.
@AP5753210 ай бұрын
@@quickcinema8031 Yes, it does. Most advertised "green technologies" have similar usability to this hand ground and clay floor mounted bearing.
@vers21 Жыл бұрын
Feeling sad for this children and for the bearings..
@rxpsycho7326 Жыл бұрын
Yes, it’s great to see KZbin supporting child labor in the worst conditions and safety practices. Meanwhile KZbin attempted to shutdown free speech and ban users during co vid.
@anteneupitra Жыл бұрын
they dont look unhappy better than western school, at least they are productive, and they dont learn how to be unproductive during 20 years.
@rxpsycho7326 Жыл бұрын
@@anteneupitra Huhhhhh…So this is a better quality of life? “They look happy” you say. Maybe they were told to look happy or loose their job or worse.
@monstermastert7314 Жыл бұрын
Turning bad looking scrap into good looking trash.
@quickcinema8031 Жыл бұрын
No, I think the inside ball bearing is replaced with bigger one, or encased with bigger casing.
@anteneupitra Жыл бұрын
thye never teCHED ME BEARING HAD SUCH EASY REPAIR LOL..
@kreasiumum2 ай бұрын
Para pekerja yang gigih dan kreatif.
@евгенийевгеньтьев Жыл бұрын
Слов нет и слюни кончились, не дай бог такие подшибники никому.
@mahmoudemam533 ай бұрын
The repairing is very wrong you change all dimensions of bearing and change clearannes of bearing
@boxingofficials7346 Жыл бұрын
Address plz plz
@AgamSingh-yv4ro Жыл бұрын
Ye kahan ki video he Mera mayapuri me bearing ka kaam he
@SajidSajid-be4op Жыл бұрын
Kha par h app ke shop
@koneapustaja8 ай бұрын
Tolerances? We got them!
@shabazali009311 ай бұрын
Bhai aap ka pase kon melgai ge kia
@SurajKumar-h8c4b10 ай бұрын
Bank of Baroda chahie Kahan milega surta me
@anandhana5568 Жыл бұрын
Superb thanks 😊
@евгенийевгеньтьев Жыл бұрын
Раньше этот подшибник заприсовывали а после ремонта сам заскочит😂
@sradowazyszczadoniecki6567 Жыл бұрын
to są jakieś jaja? nie mówcie że te łożyska dalej pracują w wagonie kolejowym na przykład...
@RysiekM9 ай бұрын
Nie. Te były do silników odrzutowych. 😂😂Tylko trochę szumią, ale jeździć i obserwować.
@ivanvaldivia8828 Жыл бұрын
Jajajaja. Para que aprenda el mundo entero que los rodajes son eternos, no se cambian!!
@fastst1 Жыл бұрын
I bet the SnapOn truck doesn't stop by there...
@maheshmakwana3561 Жыл бұрын
Ready for 10km
@temirtashkent4353 Жыл бұрын
С такими бешенными зазорами только на витрину. Там зазор уже пазор..все размеры сточили.
@РайоннаяМастерская Жыл бұрын
Мне не важны размеры. Главное чтобы блестело :)
@СергейДемидов-м7н6 ай бұрын
Открою сеть магазинов, «Подшипники пакистанские, б/у, восстановленные, дёшево». Бить не будете?
@msmechanic28832 жыл бұрын
they use their hands like sandpaper atleast give them heavy gloves for safety 😠
@aasthakamboj25224 ай бұрын
Hello
@Андрей-Долган7 ай бұрын
Надо было просто покрасить и всё.
@СергейГеннадьевич-ю5и5 ай бұрын
Это ужасная работа. Множество нарушений техники безопасности. Детский труд, работают без защитных очков на шлифовальных станках. У них, наверное, много несчастных случаев на производстве. И работа бессмысленная без контроля качества. Подшипники больших размеров можно и нужно ремонтировать, но не так
@varun0098 ай бұрын
Tolerances looser than a nightcrawler on a Friday evening.
@varun0098 ай бұрын
Stop laughing, guys. This is how orks invent things in 40k.
@JobColman2 жыл бұрын
aah child labor
@-joko-priyadi._14412 жыл бұрын
Kalau semua digerinda maka hasilnya akan jadi bearing yg kocak dan longgar ...
@СергейКЛЕШНИН-ж4ф10 ай бұрын
Блестит, и ладно!
@Yaqoobnasir7 ай бұрын
نمبر دو اپنا❤
@TradeWorks_Construction3 ай бұрын
Poor guys, at least wear a mask else all that dust will just destroy your lungs. While some idiots will say that all they are doing is making trash shiny, they are missing the point. You’ll never get the bearing back into original spec by doing this which is true, however if you just need a bearing that functions in an industrial setting AND NOT AT HIGH SPEED, then this will absolutely work [As evidenced by a market demand to support doing the work, if the product wasn’t acceptable at the price it cost to produce nobody would buy it] Anybody who is stuck in a single mindset is just a sheltered idiot who knows nothing of reality. The large machines that these bearings are meant for are going to be well worn, patched together with many repairs. They don’t need tight tolerances, hell they don’t even need a good bearing … they just need a bearing that fits and works all else is moot.
@marks3750 Жыл бұрын
making it shine doesn't make it good. And can we talk for a minute about third world child labor laws or the lack there of?
@fastst1 Жыл бұрын
well they're not out robbing stores, they're too tired at the end of the day.
@sundarammurthy785910 ай бұрын
phone number neet to bearing
@Naveensingh-iu7yr19 күн бұрын
Your contact nomber
@khanganhpham66082 жыл бұрын
Very bad quality
@РенатТимерханов-н4б Жыл бұрын
Тут молодые ребята работает а они не учатся разве.