How incredibly repair broken bearing, took from scrap and make it works

How incredibly repair broken bearing, took from scrap and make it works
#Amazing
#restoration
#skills
#process
#mechanical
#workshop
‪@mimechanics1019‬

[@user-ls8fp7hu6d]

Зачем разбирали? Варили бы так...

[@user-ul9wc7he8t]

И зазора меньше 🤣🤣🤣

[@user-nq1sg3yp3h]

Очень нравятся их сварочные маски. Совершенно не нагружают голову! Держи себе рукой, и никаких забот! Восхищает смелость токаря. Работает без защитных очков! И правильно. От этой техники безопасности одни проблемы. И да, отремонтированный подшипник получился явно лучше нового.

[@samcoon6699]

Oh, no, the repaired bearing is far from being just as good as a new one. Bearings aren't every day things like light bulbs or loaves of bread.

[@user-rj9sp6lk8u]

Горе сваршики насрал. Шов дерьмо.

[@ecocrime8957]

@@samcoon6699 it's sarcasm

[@Bosjak63]

Как давно у вас появились современные маски ? Выедь за город и посмотри на деревенского сварщика , единственное отличие - он будет не в шароварах :))

[@siemax16]

Получился подшипник с хер пойми каким диаметрами, хер пойми какой закалкой, в котором даже на видео обойма в конце просто неистово болтается :D красивая игрушка и не более) Думаю, такой херней, как сварка подшипников, даже там все-таки не занимаются. Ну или мне хочется в это верить :D Судя по размеру изделия, применялся он явно на чем-то большом и дорогом, и будучи владельцем или ответственным за эксплуатацию подобного механизма я б таких "восстановителей" и на пушечный выстрел не подпустил бы к технике))

[@antonb2507]

250 полуляхов! Думаю что такой "ремонт" Женя Матвеев оценит.

[@Myxin23]

Полная хуйня😁

[@jasonjason5325]

Lol

[@user-ul9wc7he8t]

750 полуляхов. Бог любит тройцу

[@user-ul9wc7he8t]

😂😂

[@maks040182]

Женя ради поржать, полезит читать наши коменты)

[@sandua51]

Operated lathes and other machine tools for a long time. I never saw steel melted on a lathe before! Wow! I can understand wanting to make a $500 repair into a $20 repair but holy moly! The ID, OD, heat treat, radius of the race, and tolerances are now unknown. Hope whatever it is used in doesn't spin fast!

[@artcraft2893]

Friction welding kzbin.info/www/bejne/g3q8e6GaZ71sm7c

[@colinsmith6340]

yea came to post this. not even an engineer but this is dodgy as hell. The steel used in a bearing is very specific, and heat treated, just replacing it with weld doesn't make it new again.. there is just so much wrong with this :( Welding using the lathe though.. goodbye bearings!

[@danhard8440]

i knew i would find this comment i dont even know where to begin on how bad this was you can see at the end when he picked it up in the middle how sloppy the tolerance is now 😂

[@rzerizrz]

@@colinsmith6340 but its "cool" video, to show how its made, and to "glorify" these places, nothing new lol

[@danmyname]

As long as you can make money from the video is all that matters, right?

[@sl_on]

Ходят споры, как работать болгаркой. Кто-то говорит искрами на себя. Кто-то от себя. Теперь я знаю - надо искрами на направляющие станка.

[@ertre6054]

там тряпка лежит!!!

[@user-ul9wc7he8t]

@@ertre6054 а за суппортом,к задней бабки???

[@spicymchaggis2601]

What started off as a fucked bearing using such skill and talent was able to turn it into another fucked bearing. Truly amazing stuff

[@johnbowen2963]

YIP IT FUCKED FOR SURE

[@joey66436]

well it depends on application. That bearing new probably about $1k. Pack it with grease and it will roll a large shaft better than a bronze bush. Put the repair / join not on the thrust side and it will hold decent load. It can have a purpose, and for under $1 total cost does have its place and does have a use.

[@keithammleter3824]

@@joey66436 If the application required a roller bearing rather than a simple bush, then it is unlikely the repair is good enough. In any case the bearing is now in worse shape than it was before. Before it was just worn, now it's worn and has grossly improper clearances.

[@joey66436]

@@keithammleter3824 it was cracked. the clearances are better now than when it was cracked. The clearacnes could be better again if they just v'd out the crack and weleld it closed. My point is it still has use.

[@keithammleter3824]

@@joey66436 : Cracked? It's a dead straight line. What would cause it to crack in a dead straight line? More likely it seized due to dirt or brinnelling, and they cut it so they could disassemble it. The inner housing has rotated on the shaft.

[@vladst5994]

Самое главное это варить загнутым электродом.Если он загнут,все получится и сварится очень крепко😂

[@Dmitry8822]

пхахахаааааа

[@ertre6054]

красиво корень проварил правда?

[@user-gz6lw3tm5f]

О дааа, сварщики они от бога, уже десяток подобных видео посмотрел, все как один шикарны...

[@user-yr5xg1jl3z]

Загнутый электрод заставляет ток течь по дуге, в результате совместно с обрабатываемой деталью образуется секторный дроссель , что стабилизирует сварочный ток. :)

[@juristreltsov8729]

😁

[@trent5555]

The real skill is the salesmanship it takes to sell this reworked bearing.

[@parkerbirch5286]

Display model

[@petermwheeler]

These guys have a winning formula. They do absurd repairs when they aren't busy and film it for KZbin. There's nothing controversial so they don't have to worry about demonitization. People comment on the videos due to their absurdity, which the KZbin algorithm considers engagement and consequently boosts their recommendations. They make about $3 to $5 per 1000 views, so far they made about $400 which then gets converted into their local currency. Over time they probably make a few grand per video. I wouldn't be surprised if they are making more on KZbin than on their day jobs.

[@WHJeffB]

Exactly.... Absurdity with a purpose. Almost better than using a hot girl in a bikini as the video thumbnail.

[@sergegostoli9524]

you nailed it

[@thuanguyenvan4364]

ẨâââaaêaâsnâqqâaqsaaađaqââaăâaâăaăqâasâaăaÂâââhaaqââsăăăââsăăâaăâêaâyâaââaâââââââăaâăaăâââqââeâaâââăâaâăâfaăăăăăaaââaââqăâaââqâaaâaââqăăâăăaaâsâăâââêcaââăeâơăâsâăaăaqâôăâaâaââsqâaâăaaâeâsaâaaâaqqaâsâaarâaaaâasasaqôâsaaâaaeâaaqasaâaaaajâajaaaaâsâsêaâaơÂaaqaâwjaââaaâaâawâsăââaaaơâaaââuăsaaaâsââaâaăăashaâayaâaăsaaaaâưêâdêâaăaăasâêâaăwêsâqaââââaăaaâayqaâsaaaqêaawêaââsqâahaăaaaâtaasâaauaaâaaashauâahaaâaaâaaaaaâaââaăaaăaâaâaâăaaâaâsaâasaâaaâaaâaâaăaâaâaâââaâjaâăâââsâqaâsaeâaaaqăqâijâeâaaâhaaaâaâaêaââfaââôâââwuâaaâaăâaâăâasqqaâqaâhqâaqjaaaqaôâaaââhqâaqêajâsqâhăaâsôâaâaâxâeâaaâqêaăaăădơsâqpwââêơqqjawqiôâaâaâaqâaêqơââwâqqaqââwâââdêqââaêăâqôââqâuqââaqiqâssaqsâaaâaăawââôhââââêâqâwwââqââjâqôaqăaâaâaqăisâijqâiawâqâqhjâsaăqâqâqăjqôâơâaăaaaasâqsaôiqââqôêâqqăqbyânêâôbvăbônêvnÂâaâaăâaâââÂaăăaăÂÂâaââÂăaơaââaaa

[@sammyd7857]

And this coming from someone who doesn't even know what happened to the bearing

[@bobhearst7306]

Airbus parts ??

[@user-zr4ep6hm4s]

Моя жизнь-после этого видимо -не будет прежней.....

[@user-de7wv7dl9k]

🤣👍👍

[@lion1746]

сварка обоймы подшипника без предварительной разделки, без отпуска и явно без последующей закалки, рутиловым электродом🤦‍♂️🤦‍♂️🤦‍♂️. я бы за такую работу ни цента не заплатил! ещё и сварщик опять с гнутым писюном. выключил на четвертой минуте, считаю просмотр данного ролика пустой тратой времени.

[@AJKir123]

That sort of repair is known as the elastic repair, it will keep the customer coming back.

[@bastiaoemmiami]

_And I thought I had seen everything in this life..._ *But "reconditioning" bearings is new to me!😱*

[@markshort9098]

Really large bearings like that can be reconditioned but definitely not like this 🤣 they regrind the inner and outer race and fit oversized rollers

[@donaldb3628]

OK, now, I want to see one of their brain surgeons at work!

[@nikspanakis]

Probably perform surgery with this 🪓

[@kyvih9217]

Removal of damaged/lesioned brain tissue and filling in pig brain,Maybe, I don't know, I'm not from that country.

[@EvgenyD.MGTOW.]

"Небольшой" люфтец-не беда. Зато рабочий в конце ролика счастливый.

[@user-sf3sv9ds3y]

при оборотах в 24 маха тепловое расширение уберет ненужный люфт.

[@hoofie2002]

Next video : factory making 5nm semiconductors using dirt floors and safety sandals.

[@user-jd4ye9rv1c]

Почти без люфта... можно сказать тепловой зазор сделали🤣🤣🤣

[@KUNG_FU_PADLO]

Да я в шоке бля что у них в головах не понятно.

[@loginovi82]

Это пиздец. Бедность толкает и не на такое. Но после сборки механизм проработает час.

[@astahaska]

Хорошо, хоть мешочек подстелили. Обычно так, на песок кидают…

[@user-yx4ht6ti8c]

@@astahaska и тряпочка на станке была, когда варили, и ничего страшного, что масса через вес станок.

[@Alex_Ander77]

Там с пол сантиметра люфтец , небеда , песочком с солидолом забьётся и норм будет .)

[@Turistlt]

Это видео нужно включить в учебные пособия SKF - что делать, если лопнула наружная обойма подшипника

[@sergioguiguet]

Timken está estudiando este video y no lo puede creer!!

[@manakhovnik]

Пособие для токаря, как не надо делать даже если клиент угрожает оружием!

[@user-dr9vm4iu1l]

这样的枝术会园吗，沒錢買叫他们去銀行搶

[@manakhovnik]

@@user-dr9vm4iu1l тогда придётся ждать когда клиента выпустят из тюрьмы!

[@user-ul9wc7he8t]

😂👍

[@user-ls8fp7hu6d]

Кажется они такими роликами прикалываются над теми, кто мало-мальски соображает в машиностроении)

[@Bohdan_Medvedskyy]

Самое верное решение - новый подшипник. Ну на худой конец - выточить новую гильзу. Но то поделие... Ни допусков, ни твердости)

[@bpetnoi1472]

I think I have finally figured it out. PK Restoration pays these guys to do stupid and ridiculous things????

[@keithammleter3824]

Now I have seen everything! The bearing outer has been cut (presumably with a cut-off disk), so part of the circumference is gone. Then he closed the gap in the lathe, welded it up (shocking weld quality), and machined the inside - God knows what the inside diameter now is, but it sure won't be right. He's machined at least several thou of the outside, so the bearing would not in any case fit properly in wherever it is supposed to go, but it won't anyway because he closed up the cut. He relied on the chuck jaws for mounting it square in the lathe instead of using a dial indicator - very poor practice - especially the way these guys treat lathes. And, after putting the old, worn, rollers back in, he rolled it on a table and gave a thumbs up! Yet you can clearly hear the rollers rattling around within the now oversize housing - something that should never happen. In short, he's turned a worn out bearing into an utterly ruined bearing. And by the way - he's a maniac dangerous to himself using the angle grinder in and out of the rotating job and without any eye protection.

[@EddywaKenya]

lol!

[@Ihavetruth22]

Used in some waste water pump or something. definitely not for planes. labors cheap.

[@keithammleter3824]

@@Ihavetruth22 It's not even good for a waste water pump. It's only good for melting down. Did you notice the icing on the cake that I forgot to include before? They cut it right over one of the 2 lube holes (that's what the groove is for - so that you don't have to install it with a lube hole aligned with the housing hole) So, if it is installed and they tried pumping in grease, it's going to be extra hard to get the grease in.

[@Ihavetruth22]

@@keithammleter3824 Its another fake Pakistan or indian vid. Theyre good at it.

[@WHJeffB]

@@Ihavetruth22 Yeah... The errors here are so egregious that the only conclusion you can come to is that they made this video to trigger us first "worlder's". This "repair" is so effing bad in a multitude of ways, it's the only explanation.

[@user-be2ty3sx5b]

Это тот самый подшипник, на котором они вертели здравый смысл?

[@artemdiselmann9761]

Гарантия за нашими воротами заканчивается.

[@sapperdeflap]

The Indian population is among the biggest on earth, so a life lost here and there because of 'reconditioned' hardware by Indians would probably don't hurt too much...

[@Bosjak63]

Ты не жил в 90е :)

[@Sibirsky_sibiryak]

гарантия до ворот

[@oldmelodie1003]

When welding on a lathe, always attach the ground wire directly to the workpiece. Otherwise you will damage the bearings of the lathe. Greetings from Germany Paul

[@MrVolodymyr]

They will make more video content on repearning of burned bearings))) neverending story))

[@vikingmihinlank969]

Я аж прослезился, от этого видео… Хотя и жизнь прожил, и уже трудно чем-то удивить…

[@ulin4226]

Wow! Engineer with 35+ years experience in heavy-duty machinery here. This goes against any common practices! Bearings are manufactured to mue-meter tolerances and assembled in clean-rooms. The races undergo a special stress-relief process to keep them from cracking. That type of ‘repaired’ bearing could only work in a low load, slow speed and non-critical application. Would be interesting to see what type of equipment this one went into.

[@kyvih9217]

They probably don't have the word "precision machinery" in their dictionary.And they and they have only 3 kinds of mechanical materials: iron rods, iron blocks, welding rods.

[@JT-qf4it]

That would be, the trash

[@STONEDay]

Not my Chinese skateboard bearings. lol

[@bryanlatimer-davies1222]

They did dismantle it on the clean room sack and not on the dirty floor!

[@wadem4503]

'Clean rooms'? Didn't you see him shake the hessian bag before putting the bearing on it?

[@rxpsycho7326]

Welding hardened high chromium races. This will work just fine…😂

[@thenextstepp]

Exactly what I was thinking lol

[@rxpsycho7326]

@@thenextstepp let’s not forget the likely 7018 or 6010 or whatever welding rod they are using which isn’t even rated for that application anyway.

[@haynillesen]

I m welding parts of bearings in places where there is much abrasion , great stuff and easy to weld

[@Iaintwoke]

The joke is, if they just forced it into a new housing and closed the crack. It would probably stand a better chance than after their "repair"

[@danhard8440]

i know right 🤣

[@ctiley2212]

it wasn't cracked, it was cut with an angle grinder. The rollers are all pitted, the race is pitted, the temper has been taken out of the body, it won't last five minutes.

[@cuttersgoose]

@@ctiley2212 it was cracked, there was no material taken off with a cut off wheel, if it had been cut, when they squeezed it together, the bearings wouldn’t fit because the diameter would be smaller.. they used a hard welding rod, so it’s probably ok, and it depends on the application, if it’s for a knuckle on an excavator, then it’ll last forever, if it’s a main bearing on a turbine engine, then it won’t last long

[@ngrmurthy2213]

@@danhard8440 no

[@kokusnussen]

Since they didn't but the earthing clamp directly on the outer race, they electrocuted the internal bearings of the lathe. 10 more times and they can repair their lathe bearings

[@jamesal0]

lovely bit of wall art - it's certainly no a bearing anymore

[@henkie238]

it may work for 10 minutes 🤣🤣🤣

[@mrlondon963]

I think so too.😂

[@nivdel]

Maybe it's for low rpm use, so it would be ok.

[@kyvih9217]

No.Its outer diameter has been reduced and cannot be assembled unless he uses welding.

[@Tuck343]

@@kyvih9217 why doing such a dumb thing? I'm from France, I don't get it.

[@kyvih9217]

In Pakistan, lathes are ironworking equipment.Having a lathe makes them feel more professional. For Pakistani ironworkers, iron is iron, they have no concept of mechanical engineering. Because of this, there are very few real professionals in that country who can expose those fake major.

[@Alex_Ander77]

Закалённую обойму варить сваркой 🤣👍, гениально ! Она лопнет при первым же шухере .)))

[@user-ul9wc7he8t]

Тем более учитывая диаметр валика😂

[@user-zp9sp5lz7q]

Ye это определенно лучше чем просто подшипник лопнутый заколотить. пусть он без закалки, овальный и не в размер🤣

[@piotrkutrzuba]

It is not surprising that the death rate in this country is so high, since even a bearing that qualifies for replacement and probably corresponds to the operation of some large mechanism, can be cut with a grinder, welded with an electrode and rolled, convincing yourself and viewers that the job is professionally made and the bearing is like new.

[@user-gc8dy1ih1n]

Хотелось бы увидеть весь механизм с этим подшипником. Там, думаю, тоже много есть чему учится у этих сказочных персонажей.

[@astahaska]

В других видео есть где они их применяют. В дробилке, к примеру...

[@Myxin23]

За сварку на станке отдельный лайк 😀

[@Bosjak63]

Как токарь могу сказать - нихрена станку не будет, главное чтобы окалина не спалась на станину. Кстати, эти станки времён царя гороха будут работать ещё лет двести, не меньше. Это на росийских станках с китайской электронной начинкой варить нельзя, сгорит вся "электроника" 😂😂😂

[@Myxin23]

@@Bosjak63 Ну возможно вы никогда подшипники в шпинделе после такого не видели, но масса приконтачить может в любом месте, хотя если так ремонтируют подшипники у них, то конечно похрену там на всё.

[@Bosjak63]

@@Myxin23 На своём 1А62 Станок токарно-винторезный универсальный я никогда не видел этих самых подшипников, потому что с момента его выпуска в 1953 году он ни разу не ремонтировался А что на нём вытворяли, такого вы точно не видели. Когда совхоз развалился, я хотел его выкупить но мне не дали, и в 1995 году тупо сдали в металолом ...

[@Myxin23]

@@Bosjak63 Я много чего видел...

[@astahaska]

Я смотрю австралийского ремонтника, что тяжелую технику ремонтирует. Он тоже прихватки на станке же делает. Обваривает, конечно же, на специальной площадке. kzbin.info

[@horstmuller7512]

It's filmed in Bradford, UK ?

[@nickcoppard5335]

I tried to put 1000 likes but it would only allow 1

[@kyvih9217]

They have Jamie Oliver's filming team.

[@antonp1777]

2:21 - майку на суппорт положить от сварочных брызг защищает станок!😆, лайфхак от "мастеров".

[@user-ly1ez9jh7z]

это мелоч.вот варить в шлёпанцах это надоиметь стальные ласты асбестовыми покрытием.

[@johanea]

Clearly this is all a joke, a parody? No one can seriously believe that a bearing, a highly precise piece of engineering, can be repaired with a lathe, grinder and welder? What a great joke.

[@wombatillo]

Possibly was made to get cheap content for the channel. What troubles me is the lack of safety gear for a bloody youtube clickbait video. They welded without gloves or skin protection, angle grinded without eye protection or blade guards and spun suspect welded lumps of steel in a lathe with no safety shields what-so-ever. People could have gotten maimed or killed for a few views.

[@johanea]

@@wombatillo You are correct. Some KZbin channels in South East Asia have similar content although it is more about restorations of equipment. Someone made a documentary about it, and it was explained that no matter if people like the video or call out the bull shit which it is, the channel owner still earn money because of click bait. And yes, those sandals and invisible safety glasses are great. Plus the clean sand all over the floor….

[@billietyree2214]

Retired welder (12 years on buildings, bridges and pipe(uphill)) and 8 years welding inspection, nuclear power plants, I am appalled. Whatever this bearing went into, I wouldn’t bet on it lasting till coffee break.

[@cwmbc]

After using the lathe tool to destruction and then uses a hand grinder with lathe rotating..obviously he knows an orthopedic surgeon who can put his arms back on . Total suicide.

[@tonyking9235]

THE PRECISION COMES WHEN YOU PACK IT WITH MUD . AND WHE YOU HIT IT WITH A SLEDGE HAMMER 🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@keithammleter3824]

He knows a good eye surgeon too - to fix him up after spark grit enters his eyes.

[@moskal-]

Тот самый случай, когда лопнутая обойма подшипника, прослужила бы больше без ремонта))). Лопнула обойма подшипника из за неправильной посадки, если его установят туда же где он был, то результат ждать долго не придется.

[@user-jt8yg7vi4m]

Какая там посадка? Они обойму из нутри УШМом обрабатывают

[@moskal-]

@@user-jt8yg7vi4m Все нормально, я на глазок вижу что все в допуске.))))

[@AF-ln1wh]

давно заметил, что им главное внешний вид, выглядит лучше прежнего - значит будет работать лучше

[@user-ul9wc7he8t]

@@moskal- 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣👍

[@user-ul9wc7he8t]

Скорее не лопнула,а они сами её разрезали,дабы сжать патроном,чтобы зазор между внутренней и наружной обоймами сократить. Люфт убрать. Потому что,когда обойма лопается,остаётся трещина,а у них там 3 - 4 мм

[@user-mc5iu6hg3i]

1991г. Лесозаготовка, Алтайский край... Всякое вытворяли) и шестерни наварили, вкладыши из баббита вытачивали, потом половинили их, шаровые/наконечники рулевые вытачивали, коленвалы наваривали... С подшипниками тоже чюдили, но просто втулки переходные вытачивали... Было что наружнюю обойму использовали в качестве переходной втулки, сваркой крепили и обтачивали 🤣Доходило до того что и пальцы гусинечные наваривали ну или точили из чего придётся. Можно было все это достать... Но времени небыло) Технику до последнего насиловали... Но вот такое не приходилось делать 😅👍 Но их резцам конечно респект!

[@antonp1777]

Лучшее, конечно, впереди!

[@user-qv5ch3uv7g]

Учись студент! 😂😂😂😂

[@user-ul9wc7he8t]

Тут в коне я с тобой согласен. Здорова кстати. Бывает под восстановление - всякое. Отец рассказывал,что в колхозе они из-за дефицита (90е) кору берёзы вместо вкладыша ставили. И похуй - работало. Но подшипник таким образом,да и под такой диаметр вала -- это пиздец!!!!!

[@TheSlayerworld]

Прикольно, масса сварки через весь фрезер и все узлы😆 Гениально в этом видео все)))

[@user-ly1ez9jh7z]

вы как думали.восток дело тонкое.😀😀😀😀😀

[@user-qv5ch3uv7g]

Ну не мелочитесь! Это самое безобидное в этом шаманстве!

[@user-ty3bo1ls6v]

Самое интересное что в этих видео только русский человек обстоятельно , и с критикой подходит к ихним творениям . Остальные нерусские коментаторы взахлеб хвалят процесс этого производства .

[@dikgoldwing]

@@user-ty3bo1ls6v Так откуда им знать как по-настоящему? Что привезут в воллмарт, то и берут. Может думали раньше, что подшипники на дереве растут, а тут такое откровение.

[@dzrdr65]

Well, looks like racing clearance to me. Tolerance is within a snot or 2, Do not worry about those weld canyons the rollers need to pass over. Won't chatter too much for too long. Mabey I can get them to rebuild my wheel bearing's on the mack?

[@IscuAndrei]

I know this company! They're really good! They even fix and recondition used bulet-proof glass. They can even fix a broken heart! =]

[@dimooonz]

КЛАСС!!! блестящий, ровный, гладкий -----почти как новый!!!!!!!!!!!! ПО-БОЛЬШЕ СМАЗКИ И НА ВСТРЕЧУ заре!!!!!!!!!!!!!!!

[@mevgenich]

Зря варили, надо было на эпоксидку клеить

[@user-ul9wc7he8t]

😂😂😂

[@MICHAEL-ys3pu]

Sad to see people thinking they are doing a great job when they are only doing stupid things. This will fly apart and kill someone.

[@Rossithailand]

It's probably a slow rotation bearing

[@TheDIYGuy999]

Simply unbelievable

[@gibs0nRuslan]

anyway it will crack during the first hours of work

[@shlossu6825]

Доо! Подшипнег же сразу отрыгнет после такого ремонта!

[@chipperkeithmgb]

Who’s the biggest clowns them doing it or us wasting our time watching this rubbish

[@gala1ish]

Yet we continue to do so

[@rpmunlimited397]

What kind of damage is going to happen when put in service from the lack of precession. Did everybody see the amount of internal looseness the bearing had when he lifted it by the inner race

[@sl5303]

friend be careful he did the finish with the grinder for more precision 😁

[@tonyking9235]

BE KIND THE BEARING ONLEY HAS TO GO ROUND ONCE A YEAR . 🤣🤣🤣🤣🤣🤣 MAD AS HATERS .

[@gordonwelcher9598]

The bearing was probably broken because of abuse, overloading and lack of maintenance.

[@tonyking9235]

@@gordonwelcher9598 YOU ARE KIDDING . I DO HOPE SO . MIGHT BE GOOD FOR A COUPLE OF TURNS . DO YOU KNOW ABOUT PRECISION BEARINGS. DONT THINK YOU DO TO COME OUT WITH SUCH TALK .

[@RogowskiBubba0864]

Lot of comments on quality but remember this is a country with low income and lot of old machines to restore. In their world it is fixed and thats it.

[@istvannotai6848]

Az SKF cégnél néhányan beadták a felmondásukat miután látták a videót!

[@vityap289]

Ahaha

[@1biblista]

Thanks for the tutorial, it's much faster than any other method I came across.

[@LoBeau53]

That is a pretty new and clean looking lathe he is working on. Would like to see it in a year

[@chrisjarvis4449]

i was thinking the same thing

[@nikspanakis]

Don't worry. They will weld fill slides and repair it with an angle grinder. For jobs like this it will do, will be 'precise' enough.

[@mikehall9468]

My welding instructor always hammered home the need to place the ground clamp on the actual piece of work to be welded. This way the current does not pass through the bearings on a machine, especially a lathe.

[@garazeprefabrykowaneproduc8263]

I think, rather in two weeks...

[@finhas8865]

Don't worry, saw the label, most probably made in Pakistan too. If it broke, they just weld it back. If the motor fail, they'll just rebuild it. If they need parts, they'll just cast or forge it. These guys are great in self reliance.

[@adenlove9207]

Wasting time and money the work being done is mickey mouse jobs, SKF Spherical Roller Bearing are made in very high technology and the internal clearance is very precise.

[@trapezoidalthread7052]

Я плакаль.....)))Він в зношеному стані був кращий ніж після ремонту))

[@wernergratsch5519]

i think they made it just for youtube cant imagine that somebody is serious even spending one minute to fix a bearing this way....???

[@KKonev1]

Как говорит Доктор, "в любой непонятной ситуации приваривай подшипник"

[@mikemilburn7823]

There are some things that you shouldn't do and this is one of them. I've seen birds crap out better beads than those not to mention its on a bearing FFS. The safety squints while grinding are great too, who needs safety glasses or even eyesight for that matter. If that spins over 10 rpm for an hour you'd be lucky

[@donktheclown]

That has go to be the best maintained lathe in Pakistan !!

[@ulin4226]

Did you see the cross-slide jump back towards him for about 10mm when he tightened the tool? That lathe is well broken in - ehh - worn out!

[@sapperdeflap]

I have never seen so many things you're not supposed to do that way packed into one video...

[@handmade5506]

Им забыли сказать что это подшипник , а не подставка под цветочный горшок

[@kotbalun1252]

Hand Made это декоративный подшипник.гламурный.

[@user-qv5ch3uv7g]

Это вечный подшипник! Вы не знали? Учитесь!

[@vladimirgalichenko5424]

При пррсмотре этого видео сначала доктор Дью лопнул от смеха, а затем обойма подшипника... мимо шва 😂😂😂😂😂

[@johnbocum7591]

I think the idea on this one is to fix it and sell it on to someone who doesn’t know any better. Hence more effort to polish the outside than to fix the actual race surface

[@chrisjarvis4449]

new bearings for old . ackbar that looks like the baring i give you ! jeff no no it is new

[@jasonrackawack9369]

​@@chrisjarvis4449 wow what a truly deep dive comment......I totally got that refetence though.......1000s of emojis in my phone and not one of a smiley face with a fez hat LOL.

[@azinfidel6461]

Not quite sure what I just witnessed.... So many things wrong with that I don't even have the time to comment on it all.

[@user-wt4jl4zv1y]

Через неделю обратно но уже весь агрегат))

[@DEMON23027]

Забыли шарики сварить намного лучше будет работать.Ересь просто пипец.🤮🤮🤮🤮🤮🤮

[@andre21212]

Зазоры на собраном подшипнике впечатляют!!!

[@nickvin3212]

Они соответствуюк чистоте поверхности дорожек и тел качения а также качеству закалки!Вопрос только с гравировкой суффиксов!

[@user-sf3sv9ds3y]

солидол компенсирует зазоры

[@user-ih6oo5dz7j]

Работал на ГПЗ 11,потом инструментальщик ом на МЧЗ " Луч" .Сварка ШХ15 потом откатные работы с твердостью 62-64 единицы,дичь.Развалится сразу,без вариантов.🤪🤪🤪

[@antonp1777]

Им денег не надо - работу давай!

[@user-qv5ch3uv7g]

😂😂😂😂 снова сварят! Важен процесс!

[@user-ke2fl3hm1r]

SKF тихо плачет от зависти

[@user-uy8fo2dg9r]

Загнутый электрод заставляет ток течь по дуге, в результате совместно с обрабатываемой деталью образуется секторный дроссель , что стабилизирует сварочный ток. :)

[@0154sanya]

Потом выкрасить и выбросить.

[@gennadyyurasoff635]

Или впарить кому-то как "почти новое"

[@0154sanya]

@@gennadyyurasoff635 Наверно так и сделают)

[@CHMichael]

The sand on the floor kills me. Why is he using the angle grinder?

[@dianaplayscs]

Я так поняла по комментариям , в машиностроение не нужно специального образования. Оно ограничивает возможности производства .

[@porhporhev493]

Всё верно, эти обезьяны могут многое сделать и плевали они на допуски и измерительный инструмент. Это реально обезьяны - тупые да ещё и дебилы🤦

[@ags9898]

The cost of a new bearing is going to be less than what it would cost to replace this repair. When it fails ( which it will ) you'll end up having pull this and put in a new bearing anyways. I know it must be difficult to get replacement parts in this part of the world but sometimes its not worth the hassle.

[@LarryYaw]

This is Pakistan. Not as easy as most country's. It leaves me shaking my head too. But I guess they work with what they have. And labor must be dirt cheap is all I can figure. I can not imagine this bearing lasting that long,

[@JohnDoe-es5xh]

It will probably serve in a small slow running merry-go-round for children. 😁

[@paolonieri473]

A job like that in Pakistan costs less then 50 bucks, so if it will work also for a few months it will be a good deal for them anyway

[@thepoopsoup]

I read that there pay rate is 135.00 a month.

[@JonDingle]

A similar size bearing to that made by SKF and sold hear in the UK is around about £700+ VAT. I bout a load of stuff at a bankruptcy auction and there was abrand new bearing similar in size and I was amazed at the cost. I sold it to a firm and made a profit. No way could you buy a bearing that size cheap. These guys do their best because that is what they have to do. Here in the West, our rules demand new, our engineers demand new. I don't know how long the repair in the video will last but if lasts for a while before breaking then it has saved some money.

[@user-cs9zp8cl6j]

Красавцы, зарабатывают на просмотрах. Реакция яйцеголовых-- бесподобна.

[@astahaska]

Они их еще и используют. В одном из видео ставили на дробилку.

[@mikebottrall9685]

You know I love about these restorations is they only need to look good. I would love to see this bearing installed into a high load application and see it shit it's self within 30 seconds

[@PABLO-DC4L]

Nothing but complaining on how they machine but they are working with what they got and don’t make excuses why a job can’t repaired. If you don’t like their work you don’t have to watch the video.

[@shanerorko8076]

This video is fake guys, they're not actually using the bearing. They make it obvious at the start when the bearing stands out as clean in the pile with a clear cut mar through it.

[@johnbolt665]

Welding hardened steel just creates a place for it to crack right next to the weld, and it's not a matter of if!

[@aarondwyer3746]

Theirs many doubting Thomas's,but one true faith in working with what you have and not what you haven't

[@user-pq5vs2ho2m]

я так понял они стебутса над зрителем всё изза просмотров рекламы.

[@sivik_777]

Просекли фишку как рубить бабло )

[@user-qv5ch3uv7g]

Хрен там.. тут и то и то.. это отработанные технологии причем без отходные . Это не первый шедевр востановления не востонавливоемого.. там кто кого на...т!

[@antongyrt4814]

С двукратной перемоткой создаётся впечатление что у них резцы по круче sandvik😂

[@shmuh322]

резцы что надо. ШХ твердосплав да на удар долго не живет. А тут такой диаметр.

[@user-qv5ch3uv7g]

У них резцы мулла закодировал! Аллах Акбар!

[@user-ul9wc7he8t]

@@user-qv5ch3uv7g 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@abeonthehill166]

Amazing weld repair here. I noticed the guy was using the sander on the inside of the circle that the bearing rollers will roll on and these are normally measured to an accuracy of less than one tenth of a mm ……will that not make the bearings have too much play ? Perhaps it will not matter so much if it is for a large slow wheel rotating machine. Once again the guy on the Lathe did not wear Eye protection …..! Thanks for sharing.

[@bobsmith9329]

Just when I thought I'd seen it all.

[@Kyznyashastya]

Парни молодцы! Ремонт их тема , но есть вещи которые лучше не ремонтировать!!! Вот это тот случай когда не надо .

[@user-pq5vs2ho2m]

а порвоный презервотив заклеить можно

[@user-oc3jm3bh9e]

судя по количеству населения они так и делают

[@user-ly1ez9jh7z]

зачем клеить.штопают колючей проволкой. вечный износу неподлежит.

[@stevegerhart929]

Remember the Yugo car? This is where all the parts were made.

[@editman145]

Well the bearing sounds very high precision. Just like me in the morning when I am looking for a spoon in the kitchen in the morning among all the cutlery to stur my coffee.

[@sinisatrlin840]

Those rollers and rolling surfaces must be shiny like chrome, on this bearing they are matt, bearing is worn out, usless. And hairdoo guy is going to guess internal geometry, eyeball it? Only way to weld hardened steele in bearing quality is to put it in furnace, heat it up to white heat and let it cool down slowly. We are calling this releasing. Then preparing gap and welding it with proper tehnique, preheat, ect... Now machining and finaly heat treatment.

[@daveevans1236]

Precision engineering to Pakistani standards

[@dimkotransport]

После всего сделанного, этот подшипник будет самым красивым на свалке!

[@davet7509]

This is the industrial equivalent of eating a book to gain knowledge.

[@peterrogers626]

I have seen a bearing split with a sharp edge like that but all around the middle of the outer race. Can I suggest that the way it has failed might be indicative of the way it was produced.

[@TerryClarkAccordioncrazy]

Surely this is just a stunt for KZbin views? Nobody's going to get any use out of that bearing all gouged up with angle grinder scars.

[@watsisbuttndo829]

As soon as they struck that arc with the bearing in the lathe chuck they ruined another couple of bearings.

[@95db97]

Would you care to elaborate how that happens? I'm just curious that's all.

[@watsisbuttndo829]

I didn't see where they had the earth lead hooked but it wasn't directly to the bearing being welded. Meaning the energy you see melting metal was also travelling through the bearings in the lathe. I'm surprised it still spins. Bearings hate having even small currents run through them. Its a huge problem at places like power stations.

[@95db97]

@@watsisbuttndo829 oh I see, I replace bearings on my woodworking machinery as regular maintenance. Bearings look tough yet are very precise elements. Thanks for the answer.

[@uniqko]

Amazing

[@kyvih9217]

You are great, you know it's impossible and you still do it, you good.

[@Supervisor000]

Я конечно знал, что существуют теплостойкие подшипниковые стали, ну типа 8Х4В9Ф2, однако тут...

[@user-qv5ch3uv7g]

😂😂😂😂😂

[@mrlondon963]

Looks like the repaired bearing is too loose and it will fall apart.

[@Rossithailand]

Yes I noticed the same