[OLD] How to RGH 1.2 a Xbox 360 (Phat)

[@MrMario2011]

Updated RGH v2 video should be easier to follow, feature better wire routing, and overall be a much bigger improvement over this original tutorial. Check it out here: kzbin.info/www/bejne/aaCTkoObeM5kbqc

[@alaska7747]

The commentary on your videos is immaculate. Literally you explain all of your videos so thoroughly. Really man, a great upload from a great channel.

[@_mkc]

I just finished RGHing my Jasper box. Thanks to your in-depth and easy to follow guide, everything went surprisingly well. Took me a while to get the cables on the underside of the board to work well, and while it doesn't instaboot, it works and I'm really happy right now. So that's a sub from me.

[@MrMario2011]

Glad this helped!

[@gahgae6650]

RGH'd my falcon a couple of years ago following this video completely. I never commented back then but thanks so much for this. Also this was the first real independent project I ever did with soldering, although it did help that I was in high school at the time taking an electrical engineering class where we soldered all of the time

[@MrMario2011]

Sounds like an invaluable class. Thank you for sharing!

[@gahgae6650]

@@MrMario2011 no problem man, keep on making awesome videos!

[@cashpower3365]

Im jealous! I wish my high school offered soldering courses

[@hyperdanny5661]

So you use an falcon xbox?

[@demonslayer9101]

Thanks very much Mr Mario! I managed to RGH my falcon after watching this. Brilliant video as always.

[@mustafamain1034]

Man, I love your tutorial

[@MrMario2011]

Glad to help!

[@The_Blind_Gamer]

i find it really impressive just how thorough your explanation is of every step. Even just how you explain how to position the wiring on the back of the board and why is something i imagine others not really covering in depth as you do.l and yea tht is alot of flux lol

[@MrMario2011]

Always.

[@halofreekreed3573]

@@MrMario2011 dashboard 17526 work for this?

[@Xenon_VA]

I ended up messing up my Jasper yesterday by ripping off the solder pad where that resistor is. Tried again today with a Falcon and ended up creating an RGH successfully!! Thank you so much for such an incredible tutorial. Signed, A beginner at soldering.

[@MrMario2011]

Glad it helped!

[@Xenon_VA]

@@Tysman909 It's the pad labelled "STBY_CLK" in the JRunner guide. It's connected to the C3B2 resistor.

[@Xenon_VA]

@@PurfluxYT Still perfectly functioning! Just as long as your wires are soldered in right.

[@grandtheftauto1233]

Bro I appreciate the video!! I did this back using LPT and not using RGH but we had to use a PRE-NXE console or build7371 or earlier. Now I want to try RGH on a newer console! Thanks for the great instructions

[@josephgawron6064]

Thanks this tutorial helped me turn my rgh 2( which had 5 minute boots) into an instant boot rgh 1.2

[@8bitnation419]

If the J Programmer is not being detected. Make sure to use a working Mini USB data and power cable along with disabling driver signature enforcement on Windows 10 and 11. And then go into Device Manager find the JProgrammer device and install the driver from where you installed JRunner in the common/driver folder.

[@VileStorms]

31:56 I hope that tiny resister above the green wire wasn't too important i bumped it and it went zip, I bridged it with a piece of wire.

[@mj1henry1]

You make fantastic tutorials dude. I wish I had this when i did my first phat RGH :)

[@capt2001]

this is going to sound dumb, but can you put the console back together after the mod? or does it have to stay open?

[@MikeysLab]

There is an easier clock point on the bottom of the board, For that point I generally use slightly thicker solid wire. For the rest I always use 30 awg Wire wrap wire, which is sold core.

[@MrMario2011]

Yep! I usually use that CLK on the bottom now.

[@heiwa3713]

You saved my day. I really needed a tutorial about this. Thanks! ;)

[@miserablepile]

I strongly recommend that everyone forget about the orange wire CLK STBY soldering point, and instead solder a longer wire to FT2R2 on the back of the board. 100X easier and safer. (Soldering when fine, but my heat shroud bent my orange wire and lifted the pad used for CLK STBY, I had to run another wire between the resistor and FT2R2 to save the board)

[@alaska7747]

This is a super underrated channel. Thank you, Mr. Mario, for another great upload.

[@MrMario2011]

This channel sux.

[@alaska7747]

Seriously man. This channel is great lol. I’m not sure why I’m just now discovering this channel.

[@ExSiegfried]

Thanks man. This was very helpful and i finally manage to rgh my falcon 😌

[@MrMario2011]

Woo!

[@ExSiegfried]

@@PurfluxYT As far as i know yes. But i think i will ask my friend if is still working.

[@L3TH4LPRODUCTIONZ]

Failed a second attempt today but noticed significant improvement. This guide has really helped me. I noticed using a much smaller iron tip was easier to hit these points with but I messed up the alternative clk point and fried it and then had to do the hard point which I hate. Console wouldn’t boot or even power on. Might of been a broken trace or something but hopefully third time lucky soon. Also kingbo flux is really good to use for this but the smell is horrible.

[@L3TH4LPRODUCTIONZ]

I was already using a small iron tip but there’s no way I’d of even come close to successfully doing this without the tip I used today. Gonna take a break and try again another time. My soldering skills are definitely improving though

[@MrMario2011]

All practice!

[@L3TH4LPRODUCTIONZ]

MrMario2011 hi, I’m looking on getting a new soldering iron only want a budget one for this do you recommend any for like $50 max?

[@L3TH4LPRODUCTIONZ]

@@MrMario2011 also sorry for all the messages there are points on the coolrunner that are meant to be bridged i think? JP point, On modded warfares video he bridges a couple points on the chip beforehand is this part necessary as i don't think you did it in this vid. Thanks

[@L3TH4LPRODUCTIONZ]

MrMario2011 yay I finally did it, soldering looks decent and I did the wiring like you said and tried a few different timing files but sometimes it takes up to 1 minute to boot. Not a huge flaw. I tried re soldering literally every point to improve it. Got scared at one point as the 3v3 was messed up causing it to freeze but at least I can say I’ve successfully rghed a console and it’s all thanks to you man

[@deadkefir]

i actually had someone RGH mine for me, and it worked well! Well, for the first year, at least. After 2016, it started taking longer and longer to boot, up until the point i had to wait hours for it to boot, not mentioning times it didn't even boot in the first place. BUT WAIT! THERE'S MORE! After mid 2017, it started to boot, but hang at the logo, up to sometimes having to shut it down, and back on 3 to 6 times before actually going to the dash. So, judging by what you said, the dude that installed the RGH was very lazy with cables. (also, some games crash on load, some crash after a certain amount of progress, fakelive was not installed correctly, and Xell is not installed.)

[@mkukri]

If it is a falcon or older it can be just a simple RROD, because when RGH is installed the SMC resets infinite times until it boots without ever displaying the red lights and it could be that your gpu is slowly failing.

[@deadkefir]

RealTuber DashLaunch says it's a jasper, so that could be my xbox is dying. manufactured in 2008, and i got in in early 2012, so it had quite a long run. never got serviced, either.

[@CaptainJRW]

Just got xell loaded after ages of messing with the wires, thanks for the tutorial!

[@asherael]

what are the wires that look like they end in pins for soldering temporary to the points? They didn't come with the gear i ordered and they're cool as hell. Can't find them on your affiliate links either.

[@MrMario2011]

Those are the standard NAND reading/writing cables you get with a programmer. What I did years ago was cut off the connectors that go to the console itself, solder the wire ends to sewing needs, and used heat-shrink tubing to secure them.

[@sniffles1784]

Mr. Mario question is this still up to date as of 2022

[@islamilluminatedd]

Purchasing all the parts tonight. Wish me luck.

[@MrMario2011]

Good luck!

[@islamilluminatedd]

It wasn't a smooth process for me, part of that was from the mistakes I did but after several attempts of flashing and rrods the modified nand booted.

[@NoBody-pe2em]

What is that white stuff ? 2:35 ?

[@MrMario2011]

Kingbo Flux

[@pearly9899]

What do you do if your consle doesn't even power on but the coolrunner has power and so does the system but it just won't start

[@Tobi_DarkKnight]

Text on discord Tobi#9799. I can help you. I think you killed R2B24-

[@Cooke125]

I’ve killed so many motherboards with clock one

[@acepvp271]

same lol

[@hennochoi]

Lol i once ripped out the entire wire coming from clock and it was a pain fixing it back

[@acepvp271]

@@hennochoi thats why ya gotta be careful lol I use hot glue to support it

[@JaymesHildegard]

I lifted the pad clean off in my attempt to solder it. Then when I tried to fix it I desoldered the resistor next under it. I hate myself today.

[@perryhutchlee3743]

So modding the 360 is very risky and take experience and skill? I’ve soft modded several og xboxes smoothly. It seems the only option for modding a 360 is hard modding but I don’t want to waste a 360.

[@starblob1406]

I can't program my coolrunner for sum reason it says xilinx not detected and the other times it will say USB xsfv player initialized and that not do anything else can you help?

[@Misillusions]

usually a bad usb cable going to nand x or jr programer

[@unitcount503]

you have to create a ecc first had that same error.

[@alynicholls3230]

try a parallel cable, if you coolrunner came with one, i always programmed the coolrunners with parallel and just used nandx for nand work.

[@agiluniverse]

Can you help me sir? I was bought an xbox 360 and i dont have a game i dont know how to rgh can you help me? I really need your help🙏🏻

[@lmswifthub660]

Im having troubling finding the rgh12 download

[@Cooke125]

Just done an RGH but it’s not showing on the screen

[@amneshjahj]

hi Mr. Mario, i have just followed all the tutorial but after i wrote the ecc immage the xbox 360 jasper dosen’t xell boot, it only show a green led not flashing on on the coolrunner and in video output is black screen. pls how can i solve this?

[@ultratechgaming199]

16:33 OverXELLous?

[@MrMario2011]

😂

[@danielcortez5858]

Yo Mario what degrees Fahrenheit did you have your soldering iron on?

[@Linas81]

ATTENTION: If anyone has ripped the pad on r4b24 here's the tutorial to fix it on the team xecuter forum: team-xecuter.com/forums/threads/88489-TuT-Alternate-STBY_CLK-Install-STBY_CLK-Fix-for-Slim-and-Phats-%28Noob-Friendly%29 Also thanks for the best tutorial for rgh 1.2! :D (I modded my Falcon with this and also used the r4b24 alternative point tutorial because I ripped that pad xd)

[@RobertSmith-pf8li]

Followed the guide exactly and the power brick goes red when connecting power after installing the chip?

[@jayhawker03]

My jRunner is not able to connect to the internet to download files, so all my dash number stuff is blank and I can't download any updates, is it still safe to do all of this with no online connection.

[@SoutyWouty]

How did you tin the small points on the back of the board without using the tin strip

[@MrMario2011]

Showed it all there.

[@Xenon_VA]

Today, thanks to your tutorials, I successfully did my first soldering project - changing the Ring of Light LEDs. Next project for me? RGH 1.2 on a Jasper.

[@coxyofnewp]

I just got a xbox with falcon yesterday, does this tutorial and the items in description work. or do you have to buy anything different.. tnx

[@Xenon_VA]

@@coxyofnewp The Coolrunner and the NAND-X/JR Programmer work absolutely fine on a Falcon. I actually did end up RGH'ing a Falcon for my first since I messed up a Jasper.

[@mnbvcx7091]

When i plug it in to my computer and press nand verison i get: Version: 10 Flash Config: 0x00000000 Can not Continue Can not continue. I've tested my soldering and everything should be working, but it isn't. Please Help!!!!

[@MrMario2011]

Almost always means your soldering isn't good enough. Clean it up and redo your NAND wires.

[@victorsegoviapalacios4710]

My system sometimes goes into RRoD when trying to boot in order to run XeLL (and get my CPU key), other times it boots XeLL normally, but even there, the system could just go RRoD all of the sudden (from the XeLL screen), shutting down the console and the power supply, when this happens I need to disconnect my system from power for like 20 min and it can boot again (otherwise the system gets locked in RRoD and I cannot make it boot anything). I could not finish the Hack process because I had problems with my JR-Programmer (stopped been recognized by my PC), so I got stuck at the "Write XeBuild Image to NAND" step and I don´t know if this behavior is caused just because the state of the system or there is an issue with my wires.

[@wellingtonbarbosa5138]

hello I need your help I want to make a copy of an original xbox 360 game there are videos of you there but they are older and I almost didn't understand you managed to redo it for help

[@MrDjhulk2]

Got to everything except when it was time to turn on the consol. Chip was red but the power button did nothing at all

[@MrDjhulk2]

@It's Jemmy so I bought same consol on eBay for 80 plus shipping. The chip and programmer together cost 40

[@Bann]

What does fat mean in this case? Like, fat as in the storage format?

[@abdelkadertouarsi2294]

Bannmbaby yhn Wii annutt bi O

[@GabrielXzavier]

I booted up XELL and when I did my computer died and just like in the video I needed a Ethernet cable and so my session closed in Jrunner and im currently scrambled on what to do because if I re read the nands after Ive completed all the steps I don't want to have to re do everything and im afraid thats what im going to have to do. Is there any advice on what to do because the initial problem is - I need to pick up from when Mr.Mario reads the CPU key but since closed the session due to my computer turning off im stuck and it won't read the CPU key or anything. I dont know what to do.

[@teamtuga8930]

I followed your tuturial. It all came out serto.but at the time to enter xell. does not enter and only the green luy flashes in the middle and the coolrunner also flashes green I did something wrong, already tried the xsvf all I found

[@MrMario2011]

Probably wired something improperly or to an incorrect point.

[@trainsofbritain3954]

Can anybody help. I followed all instructions perfectly. I am at the stage with Glitch 2 ECC flashed and my coolrunner programmed and soldered on. When I power on the console I get an infinite blinking green light. If the dvd drive is connected that becomes a solid green light. The Coolrunner pulses every 5 seconds or so during this with a stable red light also. I have tried every timing file and nothing works. I have also trimmed wires and resoldered the coolrunner at least 10 times. Im tearing my hair out and nothing I can do works. AT ALL Any help would be greatly appreciated.

[@MrMario2011]

Typically if you've done all of that already it comes down to improper soldering or soldering to an incorrect point.

[@trainsofbritain3954]

MrMario2011 ok.... I’ve resoldered it many times though and checked all my points, exposed wire. literally everything

[@trainsofbritain3954]

@@MrMario2011 Ive flashed the system back to stock and de soldered everything. Still dead. have I just killed it???????

[@Juggerpuff]

do you know where i can get the RGH 1.2 timing files? the links downloads don't work

[@kintler11]

does this work on falcon dash:17349?

[@MrMario2011]

Yep.

[@samiallan80]

what about corona motherboard is that work as well?

[@lordflaya3481]

Great video. :) As always. :D Your links are cheap and I love it. Getting the stuff shipped to sweden is another issue tho. Our postal service doesn't like china packages. They tend to charge administrative fees that'll double the cost. :(

[@pul53gh]

Does anyone know where he got the cables that he soldered directly to the board?

[@MrMario2011]

They should come with any programmer, but I soldered sewing needles to the ends of them.

[@maff1917]

What do you think about the MTX SPI NAND Flasher? I've seen it for five bucks, which, of course is a giant leap to the more expensice Nand-X

[@MrMario2011]

I've never used it, these days if you want something new I'd recommend the xFlasher 360.

[@mozbius]

I have this Jasper 512mb that I am trying to apply that video with a J-R Programmer v2 but then J-R Runner says "console not found" when I click on Read Nand in Jrunner v3.0b. Soldering points are sound (I have tested for continuity after resoldering everything so I am confident the soldering point are fine). Anyone has a clue what could be the problem? I have also tested the xbox on its own and it boots fine into the dashboard 17526.

[@m1ghtyboy]

make sure driver enforcement is off and you run J-Runner as administrator

[@mozbius]

@@m1ghtyboy yup did that too. Also tested under Win10 and Win7 with same result. Also I notice that when the power cable gets plugged in the leds bleep once for a fraction of a second while in other videos found on KZbin I can see them keep on flashing until the USB cable gets connected.

[@thomashedrick8446]

Can I follow this exact guide if I have a falcon same soldering places etc??

[@gertbeuk1506]

Hello, i know that this video is 3 years old, i wanna know: i have a 360 with 175559 dashboard, can i use this methode?

[@MrMario2011]

Yep

[@gertbeuk1506]

Thanks for the fast replay, i order some stuff in China, now wait for receive

[@mr.levintouge154]

Can this work with my Zephyr 2007 model?

[@MrMario2011]

Not recommended for Zephyr

[@mr.levintouge154]

@@MrMario2011 so with the Zephyr model what can I do? (ex. JTAG, RGH2)

[@alivingorganism4806]

I need help i stopped it in the mid of a nand read because it went to jtag

[@humbertofl3521]

I was making an rgh 1.2 and at the end didn't show me xell and i restored the nand and error 0022 Please help :/

[@mkukri]

Did you disconnect the glitch chip from the board? If yes and it is still 0022 then you have messed up the CPU_PLL_BYPASS point. And if you are a noob with the soldering iron then don't try to fix it yourself, because you will turn your console into a paperweight.

[@L3TH4LPRODUCTIONZ]

Alright so this is so weird I’ve rghed my Xbox and it boots xell when ejecting. The console works fine but when I try to boot into dashboard the fans go really loud and the Xbox gets really hot and it doesn’t recognise xex menu... comes up unrecognised game or something. Xbox doesn’t go mad with the fans or appear to overheat when I load xell.... very strange and can’t find an answer anywhere on the net so any advice is definitely grateful!

[@ultratechgaming199]

Did you secure the screws for the x-clamps when reassembling properly? Either that, or you need new thermal paste. I recommend ARCTIC MX-4.

[@alynicholls3230]

what i used to do with nand wires was wire them into a choc bloc connector, this would stay in the system then if i needed to go back in the nand i just wired my nandx plug into the choc bloc and it was good to go. for your own system or a one off you could get rid of them, but when doing glitches for other people i advise leaving them soldered in, since people cant help pratting about with stuff, or running game updates off disk etc, and there is only so many times you can solder those points.

[@flyingpants]

Triple checked soldering... Tried re-creating/re-writing ECC... tried all the timing files... nothing works. Could be the CR, or wires, or soldering, or ECC, or timing I guess, basically I have to start over

[@MrMario2011]

Sad times.

[@xxerr00]

After I finished soldering and I go to j runner and try to read the nand it just says device not found. Any help ?

[@kickyourassgaming8586]

Means there’s no power

[@mkukri]

You have to plug in the PSU before reading the NAND, but don't turn on the console just plug the PSU in to have standby power. And these days I really don't recommend using J-Runner, because it is very unstable and the servers have been down for years, just use nandpro and XeBuild gui for building the images.

[@ingusmant]

Wouldn't be easier to put solder on the wires and then attach them? Specially for the small difficult points. Just asking.

[@MrMario2011]

Wouldn't make much of a difference to me, but there's more than 1 way to do it.

[@JuanSanchez-rb4qu]

When soldering isnt it better/easier to tin the cable instead of the contact? just asking

[@MrMario2011]

Whichever works.

[@missles]

I did all the steps and the cool runner is red but Xbox won’t turn on

[@sneezyferret6482]

Thanks for this! I just picked up a falcon for 5 bucks, which I was going to use the dvd drive on for another system. It was sold for parts or not working...I assumed it was a RROD unit. But turns out it boots fine, but the DVD drive was broken. I took the key & spoofed it to another drive only to find it wasn't the original dvd drive I got with it....that key doesn't work. So, I think I'll RGH this $5 360 instead! :)

[@MrMario2011]

Have fun!

[@sneezyferret6482]

@@MrMario2011 Urgh... I have the dreaded "Flash Config: 0x00000000 Can not Continue" error

[@exclusivelynyc]

I'm getting unsupported nand A-0 on Zell? What's that? Thanks

[@arktikfrozty7318]

I try to open jrunner and says I don’t have system recources

[@L3TH4LPRODUCTIONZ]

I failed RGHing my console managed to extract the nand then a while later literally could not get jrunner to read anything and spent ages pretty much frying all the points trying to make them connect. The actual soldering to the chip part wasn't that hard i'm mediocre at soldering. Although the points are fairly small i've experienced similar sized points on a playstation one modchip install. Anyone know what those legs are called that people use to help get the points better, resistor legs or something? i tried googling them but can't find where to buy them i think they would help a lot with this install.

[@swpilot2494]

Great video Mario. Stuck on the boot part. Power button on the front f the Xbox flashes continuously, nothing on screen shows up, red light on the Rev C is on; the green light on the Rev C comes on and off slowly. Thanks

[@MrMario2011]

Check your soldering, make sure you can boot stock fine without the chip turned on, make sure you're building a Glitch2 image as well. Also doesn't hurt to try different timing files.

[@skuntle]

Would this work on a falcon?

[@MrMario2011]

kzbin.info/www/bejne/gWq2kKaGotupaNU

[@joethepizzaguy8244]

Would this work on Zephyr?

[@skuntle]

MrMario2011 thanks for that response hahaha

[@LiveModz]

It said all phats dumbass

[@Elijahcgts]

Александр Kузнецов Not really recommended. Zephyr and Xeon boards are fairly unstable and not reliable with any types of RGH's. They worked best with JTAG, but it's almost impossible to find a JTAGable xbox 360 unless you really dig deep and are willing to spend a pretty penny.

[@rattus1575]

so as someone who has never soldered before, I ordered a soldering kit for around 20$ and it came with rosin flux paste, however the paste was solid and i have no idea how to apply it, I tried melting it with the soldering iron by sticking it in, and as I used a qtip to get some of the paste and apply it onto the motherboard where needed, it just instantly became solid again... if anyone can help me out or just recommend me a flux paste for this type of job let me know.

[@MrMario2011]

All the stuff is linked in the description.

[@rattus1575]

@@MrMario2011 I noticed, but unfortunately it is out of stock...

[@SqualidsargeStudios]

How is wire placement causing fuck ups?

[@MrMario2011]

Interference, the developers of these methods don't say to avoid certain areas for no reason.

[@lyricvideosone2688]

what are the other wires mate that are oread plugged in solder

[@MrMario2011]

You asking about the NAND programmer wires?

[@swarmx7672]

Hey do you know where I can find a set of cables for nand x or j runner thanks

[@BaseRealityVR]

I have a matrix spi nand and cant install drivers.

[@MrMario2011]

I personally haven't used that.

[@plaguez9-1-1]

Bro you’ve helped me so much Now I’m using mod menus in bo2 and bo3 and its so cool thx

[@trippymetal777]

Will I get banned if I put my main account on the xbox

[@trippymetal777]

@@spontaneousdom5589 thanks I don't want an RGH anymore it's too expensive to buy that online thingy Everytime you get banned

[@trippymetal777]

@@spontaneousdom5589 I don't think you can get banned for single player. idk I'm not gonna risk it

[@fazedonuts6393]

This is awesome I did everything you did because I have the same mother board this is awesome I love my RGH you are awesome

[@LobPobHob]

Not sure if you'll read these still, but any pointers what I could do to get the KV info with the CPU key? I managed to get XELL running and now I'm in the part where I'll grab the CPU key and then I should create the XeBuild image. Problem is the process gets stuck to LockDownValue is 18, and then nothing happens. I have my XB360 Falcon connected via ethernet and I see the IP and get the CPU key itself, but all the other things are missing. What could I do?

[@MrMario2011]

The NAND dump will contain all your KV information once you can decrypt it with the CPU key, of which you should have both at this point.

[@LobPobHob]

@@MrMario2011 That's great to hear! But why exactly can't I get the XeBuild image done? I'm just stuck as I followed the tutorial but as my Xbox 360 had slight issues, it didn't go as smoothly as in your video. If there's some manual or documentation that could help me forward link it and I'll follow that! And thank you for the help already!

[@MinePossu]

Wait isnt there a coating on those pads? That you need fiber scratchpen

[@MrMario2011]

It can certainly help, but I've never needed them.

[@MinePossu]

@@MrMario2011 oh ok

[@pdtbestman]

How to connect the flasher to your pc?!? (he didnt show the steps, no cables nothing?)

[@MrMario2011]

You'd think the mini USB port would be obvious?

[@Fizzyfaz482]

there seems to be a different wiring method than showed in this video

[@landonjensen8389]

Would a 3tb hhd work for the Xbox if I plugged it in internally

[@mickbrown815]

quick question back a few years ago my son sent off his xbox 360 s to get modded….since then he gets the blue screen and I'm wondering can this thing be restored to the original form? I find a lot of videos on how to mod one but not to many on how to get it back to the original form....I would appreciate your feed back...thx

[@MrMario2011]

You will need to solder in a NAND programmer and flash the original stock NAND to your console, then disable the glitch chip. An easy way to disable the chip is to desolder the power wire.

[@mickbrown815]

MrMario2011 thank you sir for your quick reply that could be the item my son said was never returned to him. If that’s the case I guess his system will be SOL?

[@chewbaccasaurusrex692]

Do they not sell NAND-X's anymore. I can only find the J programmer variants on ebay ?

[@TheSilentDModding]

Another question, can you use a matrix nand programmer?

[@MrMario2011]

Sure

[@musicmayhem2444]

Hi where can I get those pins for the nand read wires from?

[@julessalditos4343]

hi, where can I get j-runner and rgh 12.2 pack?

[@MrMario2011]

Octal's Console Shop site

[@julessalditos4343]

@@MrMario2011 I mean the drivers

[@achannelthatisdeadinside4922]

i know this is an old video but i vant find the nand x anywhere, your link doesnt work for me either its as if they are all sold out. are there any alternatives to nand x? Ive been looking around but i wouldnt know how to connect it to the xbox 360 with the cables provided to read and dump the nand. Any help would be amazing

[@MrMario2011]

JR Programmer also works if you can find one.

[@achannelthatisdeadinside4922]

@@MrMario2011 thank you so much! ill have a look when i get the chance

[@achannelthatisdeadinside4922]

@@MrMario2011 Also...is there any specific way to connect it up as the connectors for the one im looking at dont look like they solder to the points you show in the video

[@garbauskasvytis]

12625 (falcon) dash work with rgh 1.2 ? There is benefits rgh 1 vs rgh 1.2 ? Because no gide available for rgh 1. At this moment I cannot update dashboard because my dvd rom is not original.

[@safetyzone2962]

RGH 1.2 is more stable.

[@buzzulinifrancesco]

Lol I do this on my phat 2 times but it won't glitch, I change the chip in a matrix v1 and it works WHY.

[@error6317]

Do i need to plug in the console when connecting to the NAND-X?

[@MrMario2011]

To power, yes. Don't turn it on.

[@error6317]

@@MrMario2011 Thanks

[@javiles2331]

If I have matrix glitch and I want to change to this coolrunner do you think that is it possible to do? My boot times are really bad....

[@MrMario2011]

It is possible.

[@javiles2331]

Thanks Mr Mario, in your opinion which one is better?

[@bendingmite]

so i did everything correctly and its a j-r programmer and a cool runner like yours so when i my falcon on no Xell Reloaded screen, no red light which is good, all I get is the power button flashing rapidly.

[@bendingmite]

so can you tell me the problem so i can fix it, please and thank you (:

[@camkb5299]

Where can I get the case / shell for the nand x?

[@wayneski4]

can you trick a xenon xbox360 when creating a ecc.bin file when modding a rgh console

[@jonw1998]

Can you use 70 percent or 91 percent isopropyl alcohol

[@MrMario2011]

Sure, but the higher the better. I use at least 91%

[@rattus1575]

well I failed, JR Programmer lit up and i managed to get it to read the nand and stuff, then moved onto installing coolrunner, the light of it lit up too when i plugged the power cable in, jr programmer did too, but then just turned off and didnt wanna turn on again. Was thinking it was bad soldering for the jr programmer wires and resoldered them, but still nothing. Tried to turn on my xbox and it refuses to turn on now. Well it was a nice experiment to try to add more use for my xbox 360, but i still need more work on my soldering skills. the small points like R4B24 are just really hard and i think thats what ruined me, goodluck to anyone else who tries this.

[@ShitpostJay]

Dang that's sad. Did the 360 red ring? First time i tried this i scorched the mobo and the capacitors a bit. Luckily my Xbox 360 still worked!