Рет қаралды 13,348
To watch the full restoration of the York cornet, click this playlist: • Friday By Request: Int...
Remove valve caps - 5 minutes
Take apart valves - 15 minutes
Unsolder bell - 20 minutes
Clean solder off bell - 5 minutes
Strip spray paint - 2.5 hours
Pull stuck tuning slides - 30 minutes
Remove serious bell dent - 2.5 hours
Remove all other dents - 2 hours
Patch 3 cracks in bell - 2.5 hours
Solder bell onto body - 1 hour
Chemical clean - 45 minutes
Polish body and sliders - 45 minutes
Re-assemble - 20 minutes
Port valves - 15 minutes
Make and assemble slide stopper bar - 20 minutes
TOTAL TIME FOR RESTORATION 14hrs 10min
COST FOR PARTS: (in USD)
Silver solder - $.25
Soft solder - $.05
Corks and felts - $1.50
Brass rod and stopper screws - $8
TOTAL COST FOR PARTS $9.80
If you like this video, please consider a small tip so Art can continue to make more quality videos. Thank you!!!
TIP JAR - paypal.me/brassandwoodwindsho...