🔥This video has subtitles that you can translate into any language🔥 🔥Це відео має субтитри, які можна перекласти будь-якою мовою🔥
@christopherfisher5304 Жыл бұрын
Your level of skill with the rigging is amazing and the ship is beautiful
@OlhaBatchvarov Жыл бұрын
Thank you!
@РоманЕгоров-б5б2 жыл бұрын
Интересно вы огоны вяжете 👍👍👍отличная работа. 😀
@OlhaBatchvarov2 жыл бұрын
Спасибо!
@kevinw70442 жыл бұрын
I always look forward to the next build installments. They never disappoint.
@OlhaBatchvarov2 жыл бұрын
Thank you very much! I'm glad you liked it!
@andreamanera67842 жыл бұрын
Stunning skill with these strops! And the quality of the ropes you are using is gorgeous too
@OlhaBatchvarov2 жыл бұрын
Thank you very much!
@quentinfitzgerald33052 жыл бұрын
Very detailed work and lots of clever little tricks.
@OlhaBatchvarov2 жыл бұрын
Thank you! I am glad you liked it!
@diyhometheaterguy2 жыл бұрын
Another amazing video! I learned a lot from the close up rope working. So relaxing and satisfying watching your work. I really enjoy your videos and learning from a master. Thank you!!!
@OlhaBatchvarov2 жыл бұрын
My pleasure. I'm glad you liked it!
@stephanebersier5622 жыл бұрын
Toujours ce même émerveillement de vous voir à l'œuvre, je pense que vous êtes parmi les plus prestigieux modélistes navals qui soit. merci pour votre partage.
@OlhaBatchvarov2 жыл бұрын
Merci d'avoir regardé!
@ЮрийМартынюк-к7и2 жыл бұрын
А продовження коли робота супер надивитись неможу.
@OlhaBatchvarov2 жыл бұрын
Продовження буде... Я кілька днів тому повернулась до дому після трьох місяців відрядження - зараз як раз розгортаю знову роботу в майстені...
@ЮрийМартынюк-к7и2 жыл бұрын
О ще питання а де Ви такий набор придбали
@JonitIvory2 жыл бұрын
Truly sublime, your attention and care for detail is on another level.
@OlhaBatchvarov2 жыл бұрын
Thank you very much!
@kenahrens39132 жыл бұрын
I could watch you do this all day. Amazing work!
@OlhaBatchvarov2 жыл бұрын
Thank you so much 😀
@александррав-щ8э2 жыл бұрын
Красавец получается
@OlhaBatchvarov2 жыл бұрын
Спасибо!
@PavelNikitinShips2 жыл бұрын
Оля поздравляю! Просто шикарная работа !!! И меня восхищает до потери сознания не сама работа по кораблю, к этому я уже с трудом , но привык ) Но вот операторская работа, это уже что то запредельное !!! Сколько раз нужно поменять ракурс статичной камеры при проводке каната крепления бушприта ?!!! Это на столько вкусно выглядит !! И бьем работы просто колоссальный ! Это уже реально вершина операторской работы, хотя зная тебя, почему то даже не сомневаюсь что удивишь ты еще не раз !) То что сценарий самого ролика реально тянет на работу профессиональный кинокомпании, я даже не заикаюсь !) А еще узнаваемы коуши производства " Корабел", ну они и лентяи, ручьи под канаты даже намека не имеют )) Ты из них просто конфетку делаешь )
@OlhaBatchvarov2 жыл бұрын
Спасибо! Со сьемкой я трачу в три раза больше времени на строительство, чем если бьІ просто строила)))) Я бЬІ уже давно закончила ету караку... П. С. Помоему "Корабел" доработали свои блоки, - у меня еще запас из их пробной партии есть - кажется с 2015 года, я на Баунти их еще ставила из первой тестовой резки...
@PavelNikitinShips2 жыл бұрын
@@OlhaBatchvarov К сожалению " Корабел" ничего в этих блоках не поменял, но это уже больше проблема по возможностям оборудования, и количества рабочих циклов на конкретный блок. То есть борьба между желанием сделать хорошо и необходимостью потратить на это допустимый минимум времени. В малых партиях все возможно, а вот в серии уже такого получить сложно. А по сьемке роликов , очень тебя понимаю, потому и снимаю шляпу перед таким колоссальным и доведенным до абсолюта трудом! На мой взгляд то что ты делаешь при сьемке просто гениально ! :-)
@GSpotter632 жыл бұрын
Your level of detail in the filming and presentation has inspired me to try my hand at ship building again..... I might even get the same model you are doing right now and follow you step by step.... Yes, cheat a little bit and let you do all of my research on the rigging .. He he he....
@OlhaBatchvarov2 жыл бұрын
Thank you very much! This specific model requires some experience. If you have never built wooden models of ships before, then you better try yourself on Amati kits. They have a series of "Victory Models" quite decent kits, at least from what I built - they can be built by anyone without prior experience! I am now in the process of building their PEGASUS, and before that I built a Pinta...
@eduardosuarez42392 жыл бұрын
OLHA HERMOSA TU ARTESANIA NAVAL ERES UNICA , FELICIDADES........
@OlhaBatchvarov2 жыл бұрын
Obrigada!
@bloodyrambo9532 жыл бұрын
Супер!! Дуже гарно все виходить!!!
@OlhaBatchvarov2 жыл бұрын
Щиро дякую!
@gerardtempelman42452 жыл бұрын
Hello Dear Olha, As usual a great joy to see you modeling. Looking forward when you resume modeling the big one: USS CONFEDERACY. Your Dutch friend, Gerard.
@OlhaBatchvarov2 жыл бұрын
Hello Gerard I'm working on the CONFEDERAСY now)))
@gerardtempelman42452 жыл бұрын
@@OlhaBatchvarov perfect
@GeHuCla2 жыл бұрын
Haz deleitado mi merienda (🧉 mate) con un maravilloso video de tu apasionado hobby! Saludos desde 🇦🇷
@OlhaBatchvarov2 жыл бұрын
Muchos gracias!
@lidialidia69812 жыл бұрын
Ах, яка насолода дивитись як в умілих руках створюється прекрасна модель корабля, магнетизм неймовірний...просто умнічка!!!удачі!!! З нетерпінням чекаю продовження 💙💛
@OlhaBatchvarov2 жыл бұрын
Я вже працюю над продовженням!
@sydive1302 жыл бұрын
Superb rope work Olha, another stunning instalment 👌
@OlhaBatchvarov2 жыл бұрын
Thank you!
@janvolek30402 жыл бұрын
There's just so much to love and learn from your work! Really inspiring and joy to follow!
@OlhaBatchvarov2 жыл бұрын
Glad you enjoy it!
@type22803032 жыл бұрын
That was again a video I absolutely enjoyed Olha !! I am blown away again by your skills and your attention to detail, but that makes the difference. This is really a very nice model and with the improvements you put on it turns out a masterpiece. I love that you make your own ropes.
@OlhaBatchvarov2 жыл бұрын
Thank you very much! This begins my favorite part of the building a model))) I love to do rigging...
@type22803032 жыл бұрын
@@OlhaBatchvarov I did notice that, and for me, it will be a joy to watch you do, so I can learn a lot again ;-)
@rupertcarss67042 жыл бұрын
Another wonderfully inspiring video. Your ropework is the best I have seen. Bravo!
@OlhaBatchvarov2 жыл бұрын
Thank you very much!
@joju9912 жыл бұрын
The ship-model I am waiting for! Brilliantly done young dame! A pleasure to look at. I am beginning to be a fan of your art. And I mean: ART!
@OlhaBatchvarov2 жыл бұрын
Thank you so much!
@S_MannMann2 жыл бұрын
AMAZING!!! Many Thanks for taking the time to make these videos! I'm getting up the nerve to attempt the rigging on my AMATI NINA and these videos will be a big help!
@OlhaBatchvarov2 жыл бұрын
Thank you! Glad to help!
@javiergonzalo16852 жыл бұрын
Insisto.. Atiende al detalle!!👏👏👏👏 Admiro su trabajo!!!
@OlhaBatchvarov2 жыл бұрын
Gracias!
@Aifosara2 жыл бұрын
Modelismo naval nivel Diosa.
@OlhaBatchvarov2 жыл бұрын
¡Muchos gracias!
@littleshopofsongs34812 жыл бұрын
Dear Olha, thank you for the wonderful video. Since you mounted the figurhead it always catches my eye. The colur and the big eyes made it look pretty "modern" compared to the hull.
@OlhaBatchvarov2 жыл бұрын
I'm glad you like it! I just cut out of wood instead of a griffin - the head of my horse and even the color is the same))) golden-red...
@TheSighphiguy2 жыл бұрын
i know you call it a "kit", but most everything i've seen so far seems scratch built. just absolutely amazing work!
@OlhaBatchvarov2 жыл бұрын
Thank you!
@ПавелВихрев-ц8м2 жыл бұрын
Супер 👍🌹
@josecarlosmello89692 жыл бұрын
Muito bom Olha, técnica e habilidade além de como sempre, ótimas imagens. Minha admiração de sempre.
@OlhaBatchvarov2 жыл бұрын
Muito obrigado!
@remyyamabushi14732 жыл бұрын
superbe !
@OlhaBatchvarov2 жыл бұрын
Merci!
@peterwright2172 жыл бұрын
again magic.
@OlhaBatchvarov2 жыл бұрын
Thank you!
@ghostofkadesh90412 жыл бұрын
Good work as always 😃👍
@OlhaBatchvarov2 жыл бұрын
Thank you!
@davidedel312 жыл бұрын
Hi Olha, first where do find all the good music. Makes the videos very enjoyable to watch, plus sub titles explanations are nice also. Do have a question, what size thread do you use for the seizings? Also what does using lighter do? Again thanks for another great video. Also about how many hours do you think you have spent so far on the Ragusian Carrack?
@OlhaBatchvarov2 жыл бұрын
Thank you very much! I'm glad you liked it. I have a subscription to ееру Artlist, where you can find music for every taste. For seizings, I use either the thinest rope that I make myself (0,22 mm in diameter) or just Guterman threads (100% polyester). The lighter melts those threads sticking out from the seizing, that have not been cut close to seizing. I spent about 30 hours on the work itself. This is without making ropes and cables.
@davidedel312 жыл бұрын
Thanks for the replay and info. As for music will let it surprise me when watch the next installments of the new videos😶. Again thanks for your great video and info blogs.
@AlexModeling2 жыл бұрын
I just found out... You make it! Question.. do you sell? Thank you Olha!
@OlhaBatchvarov2 жыл бұрын
Yes, these are my ropes! But I don't sell them - I spend too much time making them and that's why it will just kill my modeling if I make them for sale. For example, to make one coil of cable with worming, as on real ships - it can take a day. The example is in the video "#3 Main Tool for the Shipmodeling - ROPEWALK" (10:00) minutes. I will insert a link in the following comment, if KZbin does not block it...
@OlhaBatchvarov2 жыл бұрын
kzbin.info/www/bejne/rKHCeIKMmZJreZY
@AlexModeling2 жыл бұрын
@@OlhaBatchvarov thank you! I imagined that! If i mau ask... What would you sugest if i wanted to buy good "rope"? Brand, or site thats sells it? Thank you!
@MarcoArcioni11 ай бұрын
Great video again! Where did you buy these nice blocks? They are much better than those in the kit. Thanks
@OlhaBatchvarov11 ай бұрын
Thank you! These are blocks of the Ukrainian manufacturer. The link is in the description under the video...
@lor191ric2 жыл бұрын
Good morning Olha perfect way to start my birthday morning a cup of tea and watching you at your craft. Perfection as usual and my favourite part of any build the rigging.Thank you and take care Also love the background music
@OlhaBatchvarov2 жыл бұрын
Happy birthday! I wish you all the best on this day!
@ricardonovafriburgo2 жыл бұрын
Happy birthday from Brazil!
@lor191ric2 жыл бұрын
@@OlhaBatchvarov Thank you
@lor191ric2 жыл бұрын
@@ricardonovafriburgo Thank you Ricardo hope you have a great day
@ricardonovafriburgo2 жыл бұрын
@@lor191ric 👏👏
@juanmanuelalbareda77682 жыл бұрын
👏👏👏👏
@theoschmitt3037 Жыл бұрын
Sag, wieviel Stunden hast du an dem Schiff bisher gearbeitet?
@OlhaBatchvarov Жыл бұрын
Jedes Video ist ungefähr 60-80 Stunden Arbeit, manchmal 120 (z. B. Verkleidung)
@viktorasavgulis16692 жыл бұрын
❤❤❤❤❤👍
@sandeepachari92242 жыл бұрын
Can u please send this ship diagrams to me...?
@OlhaBatchvarov2 жыл бұрын
You can buy a set of drawings directly from the manufacturer!
@sandeepachari92242 жыл бұрын
@@OlhaBatchvarov I'm from India
@OlhaBatchvarov2 жыл бұрын
This is Croatia with worldwide shipping!
@sandeepachari92242 жыл бұрын
@@OlhaBatchvarov how can I buy
@kruzinshteinkukryniksy2 жыл бұрын
СУПЕР 🤗🤗🤗🤗🤗🤗🤗🤗
@TheShaunReid2 жыл бұрын
It’s never a bad day when I get to see an update to these beautiful ships. Your meticulous attention to detail is as usual, astounding.
@OlhaBatchvarov2 жыл бұрын
Thank you very much! Glad you like them!
@timdennis21932 жыл бұрын
Definitely made that look easy.. not at all.. your skills are amazing.
@OlhaBatchvarov2 жыл бұрын
Thank you so much 😊
@AlexModeling2 жыл бұрын
Hello Olha! Your vídeos are, way above and beyond everything we wished for...amazing! Can you tell me were you get that thread to do that wonderfull Rigging! Tha thread or Ford looks so good!! If you could point me in the right direction i would buy some no hesitation
@OlhaBatchvarov2 жыл бұрын
Thank you!
@frankgaletzka84772 жыл бұрын
Guten Morgen Was für eine feine und präzise Arbeit . Im Video sieht das ganze sehr leicht und einfach aus. Aber es sieht nur so aus . Jeder der schon einmal versucht hat etwas ähnliches zu bauen weiss ein Lied davon zu singen . Sehr schwierig . Es ist schön anzusehen mit was für einer Leichtigkeit die Arbeit erledigt wird . Präzise und perfekt. Vielen Dank für das Video Viele Gtüsse alles Gute Frank
@OlhaBatchvarov2 жыл бұрын
Danke Frank Ich bin froh, dass es dir gefällt
@mikmik90342 жыл бұрын
Again, No narration as to what is going on nor WHY. Which tools are being used. Is it a scratch build, or a manufactured kit.
@OlhaBatchvarov2 жыл бұрын
General information in the description under the video and materials are in the subtitles...
@tonygaetani18922 жыл бұрын
Another fantastic video you are the best thank you Tony👍🇺🇸
@OlhaBatchvarov2 жыл бұрын
Thank you very much!
@denisv43852 жыл бұрын
Gorgeous!!!
@OlhaBatchvarov2 жыл бұрын
Thank you very much!
@kruzinshteinkukryniksy2 жыл бұрын
ЧТО ЗА КЛЕЙ У ВАС ???ПОДСКАЖИТЕ ПОЖАЛУЙСТА
@OlhaBatchvarov2 жыл бұрын
Тут в основном разньІй циакрин - где какой я пишу субтитрах. ВьІ можете в настройках вьІбрать "авторепевод" и вьІбрать язьІк!
@kruzinshteinkukryniksy2 жыл бұрын
@@OlhaBatchvarov ГДЕ МОЖНО КУПИТЬ ТАКОЙ КЛЕЙ??
@Krejcak2 жыл бұрын
Very nice work. May I ask what camera are you using?
@OlhaBatchvarov2 жыл бұрын
Thank you very much! I use Canon, but the quality depends not on the body but on the lenses. I shoot mostly with a ЕF 100mm f/2,8L macro lens...
@GregWilson6352 жыл бұрын
The quality of your work is exceptional! I don't think I could get anywhere near this level of perfection.
@OlhaBatchvarov2 жыл бұрын
Wow, thank you!
@chopstyx12 жыл бұрын
Now I think you're just showing off. Lol. Looking at a lot of this thread work I think many people would be happy to twist a thread around the rope a few times then put a drop of glue on it. But that's not good enough for you. You do a fancy coil first and tie it off all pretty. Beautiful work as always
@OlhaBatchvarov2 жыл бұрын
Thank you very much)))
@charleshart69922 жыл бұрын
Great work Olha, looks magnificent!
@OlhaBatchvarov2 жыл бұрын
Thank you!
@brianmcdonald38312 жыл бұрын
It would’ve been nice to see this ship in person but I unfortunately wasn’t able to attend the conference this year
@OlhaBatchvarov2 жыл бұрын
Maybe next year?
@garygenerous89822 жыл бұрын
Amazing as always Olha. I am speechless over what you are able to accomplish. Thank you for allowing us to see you at work.
@OlhaBatchvarov2 жыл бұрын
Thank you! I am glad you liked it!
@johnnyszczepanski918127 күн бұрын
I m now in this fase of building the ship. Thx for the video. It helpt me verry mutch
@OlhaBatchvarov27 күн бұрын
Thank you! I am very glad to hear it!
@МакаријеЧудотворац-ч2ъ Жыл бұрын
More I look at your videos, it is more tempting to buy a Ragusian carracks... Thank you...
@OlhaBatchvarov Жыл бұрын
Glad you like them! I had a lot of fun with this model!
@Fulklenoir Жыл бұрын
Quand je vois avec quel point, Tu as le souci du moindre détail Je comprends pourquoi tu passes des centaines d'heures sur une maquette. Quand tu commences une maquette as-tu déjà en tête toutes les modifications que tu vas apporter au kit? En tout cas merci de continuer à partager ton dont avec nous, pour moi tu es comme un guide qui m'évite plein d'erreurs ( j'ai commencé la Pinta) et qui me montre toutes les possibilités envisageables. Merci infiniment
@OlhaBatchvarov Жыл бұрын
Merci! Je fais des recherches pour chaque modèle au fur et à mesure que je le construis...
@khalidsalim98542 жыл бұрын
Well done
@OlhaBatchvarov2 жыл бұрын
Thank you!
@korabelnikolev8292 жыл бұрын
Красиво сделано, но не было тогда еще бакштагов на бушприте. Они появились позже, вместе с кливерами.
@OlhaBatchvarov2 жыл бұрын
Реконструкция етой модели сделана с гравюри на сребной тарелке в церкви - не удивляйтесь. После пушек на лафетах - я перестала исправлять ету модель. Ее нужно с нуля построить что б все исправить!
@JBoller2 жыл бұрын
No se que decir.....cada video me sorprende más-----
@OlhaBatchvarov2 жыл бұрын
Gracias)))
@mikebeer15672 жыл бұрын
I think the rigging looks far more difficult than the planking
@OlhaBatchvarov2 жыл бұрын
But more exciting! You can test each rope to imagine how it works on real ships...
@andrejmeng222 жыл бұрын
👍🇺🇦
@Builtbyronny2 жыл бұрын
👍
@tomtruesdale69012 жыл бұрын
What incredible detail. When you do the lashing around the bowsprit or masts do your reference books show how many times you go around the spar? That model is turning out beautiful.
@OlhaBatchvarov2 жыл бұрын
Nobody specifies the standard amount - I just put the rope evenly...
@petermerz27042 жыл бұрын
Wow! That’s a lot of fine detail work. My hands aren’t steady enough to do that anymore. Love watching the videos though. Thanks for sharing. Happy days and model on! 😎🇨🇦
@OlhaBatchvarov2 жыл бұрын
Thank you very much!
@robertsalanon2909 Жыл бұрын
Plaisir de voir tes vidéos si belles ...
@OlhaBatchvarov Жыл бұрын
Merci!
@fabiosavi98362 жыл бұрын
Lavoro ben fatto 👍👍👍👍👍💯👍💯👍 fantastico 👍
@OlhaBatchvarov2 жыл бұрын
Grazie!
@ralfweber75622 жыл бұрын
Wonderful work! It looks so easy but it takes many years of experience.
@OlhaBatchvarov2 жыл бұрын
Thank you very much!
@boblangenberg78592 жыл бұрын
The ropes themselves are pretty amazing, the weave, scale and texture are remarkable. I assume you’ve spun them yourself on your rope walk? This is such a lovely vessel.
@OlhaBatchvarov2 жыл бұрын
Thank you! Yes, these are my ropes!
@ИльясХасбулатов-м5д2 жыл бұрын
Чудеса да и только!!!
@B747-4OO2 жыл бұрын
Excellent work again! Your ropes and all the precise details leads to stunning realism. 👍