Olight Baldr Pro R

This is a firearms safety device to allow proper illumination of targets to safely fire at targets. This Baldr Pro R tactical flashlight was sent to me by Olight for testing and evaluation.
PRODUCT INFO & DISCOUNTS
moondogindustries.com/olight-...
CHAPTERS
00:00 Intro
00:40 Unboxing
02:52 Tac Light Comparison
04:22 Mounting and Controls
06:23 Testing
11:09 Conclusions
MOONDOG R&D
Subscribe to my new channel:
/ moondogrd
JOIN OUR COMMUNITY
Blog: www.moondogindustries.com
Facebook: / gearhor
Locals: gearhor.locals.com/
Telegram: t.me/gearhor
Twitter: / moondogairsoft
Instagram: / moondogreviews
MeWe: mewe.com/group/5fa870cdc0deed...
MUSIC
KZbin Music Library
TweetTomTom by P. Del Castillo used with permission
PRODUCTION NOTES
Edited on Apple Final Cut Pro X
Shot on Panasonic G85 and Samsung S9+
This video is for educational and entertainment purposes only. All demonstrations were filmed in a safe and legally regulated location. Do not try this at home without proper supervision. Portions of this video may have been filmed in a Law Enforcement shooting range supervised by a certified Range Safety Officer.
SPONSORSHIPS & PARTNERSHIPS
We’re interested in talking with you about sponsored content creation or and featuring your product in future reviews. Contact us at www.moondogindustries.com/cont...

[@Dwayne7834]

Good review and video thanks.

[@MoondogIndustries]

Much appreciated

[@neintoten6155]

Thank you!

[@MoondogIndustries]

You're welcome!

[@faganj3]

You did an excellent job. Please do a video on the Baldr S 800 and Baldr Mini, Thank you.

[@MoondogIndustries]

Great suggestion!

[@mrhamburger6936]

I purchased one of these lights it's a great light worked okay for a while then I start having problems with it it would turn on by itself and run the battery out and what it would turn on you couldn't turn it off that I noticed were you attached the magnetic charging cord on the bottom if you would touch it the light would come on and touch it again it would go out what I found was some very small metal filings stuck on the magnetic base and contact that caused this problem I cleaned it off with some cotton it blew it off with some compressed air in a can that took care of the problem that I was having with it good thing it has a 5-year warranty

[@MoondogIndustries]

Did you have any problems sending it in for replacement? They've been very responsive to me but I can never be sure if it's because I'm on KZbin? Hope you subscribe.

[@ismaelmestas9015]

Great video my friend. I have a question : Does the Olight Baldr Pro R fits ok on the Staccato XC ?

[@MoondogIndustries]

It should. But I don't have an XC to check for you.

[@BryGuyMcfly]

Nice review! I read that some light bearing holsters that fit the x300 will be compatible with the baldr pro r. Were you able to find a holster? Althiugh slightly shorter, how's the width compared to the x300? Thanks

[@MoondogIndustries]

It fits in my Safariland 6390. If you run the retainer strap, it's a bit tight because the slide rides a little higher.

[@kyth4062]

The Safariland 6360 ALS/SLS(Surefire x300U) works with it fluidly! No issues

[@gordongekko9469]

2 years later (from your review) and I still can’t easily find a holster for my Heckler & Koch VP9 and the Pro

[@MoondogIndustries]

Custom holster companies have been getting cheaper?

[@Dmytro_Klim]

Informative video. Good job. I have Hatsan BTS12. What tactical flashlight would you recommend?

[@MoondogIndustries]

That's their bullpup PCP?

[@Dmytro_Klim]

@@MoondogIndustries kzbin.info/www/bejne/hKu5oXiHmb5-bLs

[@01MeuCanal]

I would like to know more about impact resistance. I saw a video where baldr mini laser broke after 12 feet drop test.

[@MoondogIndustries]

Dropped from 4m to concrete?

[@HunchoHunt13]

You think this would look good on the FN 5.7? I wanna add some weight but I kinda don’t want it to stick out to far, Ik my barrels a lil longer than a Glock

[@MoondogIndustries]

That's kind of personal taste. I never liked that my old Valkyrie and now this Baldr sticks out past the muzzle of my Glock 17. Not just because of aesthetics andbutalso because it's a pain in the butt to clean the lens after a range visit.

[@BarneyTheDinosaur8D]

Hey bro I ended up buying all 3 colors 1 black for my fde glock 45 1 grey for my 509t grey 1 fde for my full fde fn 5.7 still haven't received them but wondering if you already have and did it look good one ur 5.7

[@joesaja]

Actually, what is the use of that little adjuster screw (M3x4) that include in the package? Is that for replacement adjustment screw or just retainer for the laser adjustment screw? If it's replacement screw, does it means that adjuster screw can be taken off?

[@MoondogIndustries]

The only screws I got were to replace the Glock recoil block with a 1913 block? Is that the one you were mentioning?

[@joesaja]

@@MoondogIndustries no, I mean the smaller screws than the glock/1913 block screws. It's included in the package also

[@MoondogIndustries]

@@joesaja Maybe you're right, they are replacement laser adjustment screws?

[@oldhead5228]

Good Video. Would this fit the sub2k

[@MoondogIndustries]

Yes. I'd consider running this on my Sub2K after I finish testing on my Glock.

[@J-Jay29]

Have you had any issues with the laser not holding zero?

[@MoondogIndustries]

No, knock on wood. But I've only owned one for less than a month so far.

[@J-Jay29]

@@MoondogIndustries thanks for the feedback !

[@qslierslier2975]

Hey man you running exactly same setup as me! G17 gen 3 with hogue grip and extended slide stop. Would you recommend this light to me?

[@MoondogIndustries]

Yeah, I still have this on my bedside setup, so yeah I recommend 100%. Hope you subscribed.

[@qslierslier2975]

@@MoondogIndustries I did, great review btw. Keep it up man

[@qslierslier2975]

Would you do a review on the Valkyrie Turbo LEP light?

[@DjRayRay09]

Running the same myself!! Only difference I’m running apex trigger and 3.5 connector 😎👍

[@mikesuch9021]

How do I put mine back in lock out mode?

[@MoondogIndustries]

I believe you press both buttons for 2 seconds? Hope you subscribed?

[@predig1671]

My zero hold on my ohlight balard. Just got this light this morning.

[@MoondogIndustries]

Let us know how well it holds zero over time. Hope you subscribe.

[@calgriff924]

Will the baldr pro R fit on a Glock 21.?

[@MoondogIndustries]

Yes. The accessory rail is the same width and length as my G17.

[@Josejoelgmail]

i try to charge it and the light it’s green and it does not charge

[@MoondogIndustries]

It may be the battery or maybe the charging cable. Either way send it back and get a refund or replacement.

[@sethkiller57.59]

I have a olight on my AR and I had that problem I just ran it dead then put it on the charger and it fixed it for me anyways

[@dcyphyr]

In the long run, there's a word to describe devices with non-replaceable batteries. Disposable.

[@MoondogIndustries]

True. Though with a 1000 cycles, by the time a Lipo battery needs to be replaced they'll probably be introducing a 5M lumen light or some other new gimmick.

[@dcyphyr]

@@MoondogIndustries or it could die the first time you leave it in a hot car. No thanks.

[@TheRealEMURSE]

I'd like to see one mounted to a rifle

[@MoondogIndustries]

Positioned near my hand on your handguard, I found it easy to access the controls.

[@01MeuCanal]

So when the battery dies you just trash the whole thing. I dont like it.

[@MoondogIndustries]

I used to think that too. But they're rated to 1000 charging cycles before losing 20% capacity. By the time the battery loses 50% capacity, they'll be some newer high Lumen model I"ll want to replace it anyway.

[@01MeuCanal]

@@MoondogIndustries If its possible to disassembly, at least it could be possible to replace the battery anyway.

[@MoondogIndustries]

​@@01MeuCanal Like a laptop, it's possible to unscrew the housing to get inside. I suspect the battery has soldered contacts but I haven't the knowledge or desire to open it up myself.

[@Josejoelgmail]

Me olight dosent charge

[@MoondogIndustries]

Did it charge before? If it's new, send it back and get a replacement from wherever you bought it.

[@joe.halstead8822]

Mediocre light, 800 peak lumens, not 1350. The components for zeroing the laser are sooo loose you lose your zero when you remove the Allen wrench. Don’t waste your money

[@MoondogIndustries]

You get +1350 lumens for like 30 seconds, then it's 800. So yeah.