OLIVER 70: More wheel JACKING OFF SUCCESS!!!

[@PeteAndersen-e1s]

Please keep making these videos

[@Scott-qj1pm]

Great video Ross! Great jacking by the way

[@rosstheoliverman]

🤣 Thanks!

[@mikemccrory8309]

The wrong oil is always better than no oil. 😂😂😂

[@rosstheoliverman]

🤣🤣🤣

[@jimtrewartha2594]

A mechanic at my old MF dealership was using a chisel to try to spread open a tractor hub, and like you said, flew out like a bullet! To this day, that chisel is embedded in the insulation of the shops ceiling! 😂

[@dougsturgill1356]

Wow what a struggle bus that was,but you won without any animal noises,darn it anyway

[@rosstheoliverman]

Thanks Doug!

[@jamieebersole6755]

That one decided to fight to the end. My grandpa would loosen the bolts and go plow a while to loosen them up before he tried to move the hubs. But flat tires kinda makes that idea not possible

[@DonWelter]

That hub was a battle of sadness to the end. Sometimes hard-fought battles give you a sense of success despite the frustration.

[@mattwilkinson8502]

Thumbs up

[@rosstheoliverman]

Thanks!

[@davidbarnes706]

You are very creative that’s what I like so much about your videos

[@johnbender1596]

The true definition of a struggle! Wow glad to see that hub was safely removed.

[@rosstheoliverman]

Thanks John!!

[@DaleHegland]

Congratulations Ross on your JACKING OFF SUCCESS!!!🤣🤣🤣👍👍

[@michaelclark6603]

What about an air chisel? Maybe giver some heat and then air chisel away?

[@rosstheoliverman]

Maybe but that probably would just bust chunks out of the cast.

[@thomasr.miller5553]

Ok 😁 Great job . RUST is the problem. SO you need a way to put a bucket on the axel cover and soak it in Evapo rust remover. thanks

[@alanmize5627]

stuck it was. man my arm hurts from all that pounding.

[@rog4864]

Whew, that was a tough one. I was afraid for a minute there you were going to have to bust the hub to get it off. Congrats.

[@JoTa8389-gu9vi]

A couple of years ago I saw someone on KZbin convert a jack for horizontal use. Of course I forgot it in a couple of days, but it can be done.

[@keithwuchter624]

Great job and video Ross. You had a tough battle, but you won out. I like the vision you have for this guy. Congrats.

[@waggtech4883]

Or whatever you have laying around for the jack? Last time I added oil I grabbed the bottle off the shelf clearly marked hydraulic jack oil and topped off the jack in question before discovering at some point the bottle now held chainsaw bar sauce…. After draining the porta power pump it was filled with regular hydraulic juice.

[@kcoers]

Glad you were able to get that hub off! Always good to see the oz'er in the video :)

[@johnkissack5295]

Lots of hard work!!

[@kellyschurr3675]

Always like a happy ending......

[@oldasdirt1909]

I’m pretty disappointed in that you actually used a big hammer 😂. I would have thought the 4x4 would have been the correct tool to use as a hammer. Success is so sweet. Have a great day

[@MikeJensen-wo7oh]

That looks like it was a royal P.I.T.A.!!!!!!! I changed a wheel center on a 400 Farmall this morning, not near as much work as you went through! Never had a tractor with splined axles and not running out to buy one either! That much anti-seeze would probably cover you head to tow three times over.

[@Offthehooktowing]

They make vertical/horizontal bottle jacks. They are a little more expensive.

[@donaldwallace7934]

Buddy!!!! 🐕 I almost thought this was going to be an R rated video from the title Ross! 😂 Glad you had success getting the hub off!! 😊

[@dennispriser769]

You can use ATF transmission fluid in the jacks too

[@JeffMilitello]

Persistence pays off. Progress is a good thing especially when you have a vision in the end.

[@paulprillwitz9901]

Michel Jackson said it best just beatit just beatit!!!

[@greggswanson7460]

Hello Ross, Great display of adaptability, to get ur done, what is your plan for silver colored fiat ???? Is that project waiting for warm weather?? It would be great to see that tractor come to life again, Thank-you for your quality content.

[@JohnBryant-qc5zg]

Much sadness in that hub! Don’t forget the eclipse cow video! Will they mow? News at five!

[@podexperfectussum]

Ross, could you put a zerk on a single-acting tool cylinder then use a grease gun a s a "remote" pump?

[@bradleysherer7610]

Try power steering fluid it's thin and made for high pressure

[@alexgarrod9093]

Have dryed air jack hydraulic ram bud or heat it up bit

[@williammatzek4660]

On a pot a power the jack sets level on the ground , a hose goes to the cylinder. I'm sure that is the difference. What about a screw jack?

[@corydriver7634]

There seems to be a lot of Knutson in your life, just and observation not judging.

[@rosstheoliverman]

🤣🤣🤣

[@ImpHalla66]

Git 'er Dun!!

[@larryklostermann5779]

Nice video Ross

[@chadschiefelbein8697]

“Almost beat my average”.. 😂 should’ve just stuck with one hand tho. Now both your shoulders and wrists will hurt like hell tomorrow!

[@rosstheoliverman]

🤣🤣🤣

[@jamesspiker6024]

Well how did you get crud in the tractor hub, don’t you wash your tractor every time you use it

[@rosstheoliverman]

🤣🤣🤣

[@jeffmurdock2713]

When you put the wheels back on, put the tread facing the other way. Just asking.

[@dankreoger611]

He had them on backwards to get it off the trailer.

[@jerryfaulkner6518]

I could have went all day without seeing that subtitle.

[@jonathancrissinger2301]

Good job. I interested in seeing how you get the steel wheels off.

[@paulprillwitz9901]

👍👍👍👍

[@Ron-m9p]

don't they call that tip a rosebud tip?

[@rosstheoliverman]

That’s what I know it as.

[@bigun447]

Use shorter strokes and let the pump get filled with oil. 10w motor oil or 10w-30w will work. Thick oil just will not flow into the pump as well. When you get to the end shorter strokes will make the fallout not as dangerous. Different strokes for different folks. BTW, If you break any more stuff today, I am going to turn the Sun off for 4 minutes and 30 seconds today so everyone should put money in the big kettle in front of me or I will turn the sun off forever. Aww Hell, I am going to do it anyway. We are dead center for the maximum amount of totality for the eclipse of 4-8-24. We went to the Garden of the Gods in So. IL. and was in the totality of the eclipse. Traffic after the eclipse will be bumper to bumper leading away from the path of totality when the event is over. We are going to our daughter's resort 4 miles south of here for an eclipse party.

[@ronwhites1432]

It was to bad when Ross was JACKING OFF his wheel that his shaft was not long enough to complete the job the first time but after repositioning things he was able to completing his JACKING OFF the wheel without having to BEAT IT OFF the axle with a hammer

[@jeffgrudosky6084]

This basic white man in his 50's enjoyes watching your videos

[@StevenMeckstroth]

Don't use more force, just get a bigger hammer.

[@mammabearshomestead]

middle 30s ? lol

[@rosstheoliverman]

Middle/upper. Still another year and a half left. 🤣