Oliver Tractor Gas Tank Had YEARS of Gunk In It! Can We Clean It?

Gas tank removal from the old oliver tractor. We remove the gas tank and the carb to prepare them for cleaning.
Watch the previous Oliver video here: • Fixing the OLIVER Trac...
We post videos of Branson tractors and homestead implements here on the farm! Just hit the red button and the bell icon to be notified when we release new videos! It is 100% FREE 😍
Check out Branson Tractors here:
bransontractor...
Get your HOMESTEAD IMPLEMENTS HERE:
www.homesteadi...
Save 5%: HANK5
Save 10%: USVET10
AMAZON*
🎁 AMAZON STOREFRONT: amzn.to/2Ve3F1Y
👨🏻‍🌾 👩🏼‍🌾 Our website!
www.hamiltonvi...
You can email me at [e-mail]
❤️ TEESPRING*: teespring.com/...
💰 PAYPAL: [e-mail]
---------------------------------------------------------------------------------------------------------------------------------
Products we use on the farm:
⛓ SawHaul*
SAVE 5% with this link:
shop.sawhaul.c...
🦏 RhinoHide Canopy*
www.rhinohidecanopies.com
Tell them Hamiltonville Farm sent you!
👍🏼 SureCan
www.surecanusa.com
Tell them Hamiltonville Farm sent you!
🚜 TITAN ATTACHMENTS*:
www.jdoqocy.com...
---------------------------------------------------------------------------------------------------------------------------------------
Find us on INSTAGRAM: @Hamiltonvillefarm
FACEBOOK: Hamiltonville Farm
TWITTER: @Hamiltonvllfarm
*Some links are affiliate links. If you click on the link and purchase a product, then we receive a small commission.

[@HamiltonvilleFarm]

Watch more Oliver videos here: kzbin.info/www/bejne/Y3Pah6uZj8msabM

[@aafarm1652]

Like your FFA shirt you had on in the start of the video. Thanks for supporting FFA by wearing it. I am a FFA advisor so like to see folks supporting the organization!

[@HamiltonvilleFarm]

Wonderful organization for sure👍 very important

[@dustindavy4319]

You have flow! Good idea to buy repair manuals. I bet it's nice to have that hoist in the shed! Cool old tractor. Thanks for sharing.

[@robert-vt1fq]

I like all the words you guys did on the gas on the phone the carburetor and a gas tank it's all pretty cool thank you all very much God bless you

[@HamiltonvilleFarm]

Thanks for watching 👍

[@sambogaddis2076]

Can't wait to hear the Oliver run

[@HamiltonvilleFarm]

You and me both 👍

[@toddfrisch737]

Keep up the good work. I truly enjoy watching your videos

[@HamiltonvilleFarm]

Thanks Todd. I appreciate that 👍

[@andrewkiwi1]

Take the carb apart and clean it and clean the jets and just get a kit for it. if you have a compressor blow out the jets when its apart. The inside of the bottom of the bowl may need a scrape. Read the manual to find out how to set the float height with the new needle and seat in the rebuild kit . When you put it back together wind the idle mixture screw in gently and then undo it 1 and a 1/2 turns and then reset it as necessary. Now for the tank. The plug you pulled out of the tank is the drain plug as its at the lowest point .Now take the fuel filter out too as it will probably have a little brass mesh sock on it to stop the crap through the line. Blow it out too. Here is a method to clean the tank. This should work for most tanks. put the drain plug back. If the fuel filter has a sock on it leave it out and sharpen up a stick and screw it in. Throw in a hand full of clean nuts and bolts or fence staples. Add a quart of diesel and hold it up the right way and shake it for a couple of minutes. it ill act like a miners ball mill. This will loosen most of the sediment in the tank. Why diesel and not gas and nuts and bolts. Diesel wont go bang if you make a spark. Nuts and bolts or staples they are magnetic and if you filler neck extends into the tank you can use a magnet to get them out. Then flush it with a quart or two of gas. You may have to do this once or twice but it is tried and true. Have fun.

[@HamiltonvilleFarm]

Thanks for the comment 👍

[@garyfeltus9801]

Hank as always great video. Before you pull the jets out . Turn back in and count the turns . Keep the adjustments the way we're. Be very careful not mess one up. That is if you rebuild it. Keep them videos coming .

[@HamiltonvilleFarm]

Yes sir. Watch the rebuild video out Inna few days😊👍

[@stanleybaker8707]

That tractor is going to be awesome 👌 when its done!!!!!!

[@HamiltonvilleFarm]

Yes sir. Thanks for watching 👍

[@jasoncline4383]

Looking good Hank

[@HamiltonvilleFarm]

Thanks brother 👍

[@serafinroman1313]

I love all your videos they very entertaining and a learning experience you are great guy and honest person !

[@HamiltonvilleFarm]

I appreciate the comment. Thanks 👍

[@jimcady9037]

Keep up the good work Hank. The surprises with that carb are on the inside. I rebuilt a similar one an ultrasonic cleaner would work well on it. The sediment bowl I would buy new. They are cheap enough. Save you some work. Be careful with the gas tank clean it good and make sure there are no leaks. Love the channel Hank. Keep up the good work

[@HamiltonvilleFarm]

Thanks Jim. I think I'll go that route.

[@bibleandbibs6407]

Keep the good stuff rolling along!

[@HamiltonvilleFarm]

Thanks 👍

[@chrishunter5041]

Keep up the fantastic work, its a pleasure to watch.

[@HamiltonvilleFarm]

I appreciate that Chris👍

[@dannydrake7348]

One way I have cleaned a rusty tank is put some diesel and small gravel in tank and put it in back of the truck and forget about it for a while, driving around the sloshing really cleans it , rinse it out and enjoy a clean tank

[@HamiltonvilleFarm]

Right on👍

[@bruceaplin]

Tanks 4 making this video. We liked it 👍

[@HamiltonvilleFarm]

Right on 👍

[@oldschooltruckingphotos]

Keep it up Hank, love the series and hope to see the Oliver fired up soon!

[@HamiltonvilleFarm]

Thanks Jack👍 I appreciate it!

[@georgepeckham9254]

Y'all do good at making them run

[@jackjacke4654]

Disassemble Oliver 55. I like this tractor. It has personality. : ) Besides the exhaust!!! Ah!

[@HamiltonvilleFarm]

Thanks for watching 👍

[@anthonybarton2103]

You can always use Diesel as a cleaner to soak the carburetor flush the Transmission and you can use Dow Bathroom Cleaner as a degreaser cleaner as well. One of them lines could be a Choke on the Carburetor as well.

[@HamiltonvilleFarm]

Thanks 👍

[@anthonybarton2103]

@@HamiltonvilleFarm 🚜 trying to be a help to you and save some money 💰 have a wonderful Labour day weekend be safe and be well and Thank you.

[@robert-vt1fq]

I want to hear from you. I did a real damn good job I like this guy did an excellent job very proud of you God bless you all

[@HamiltonvilleFarm]

Thanks Robert. God bless.

[@isaacwalker7863]

Great video hank! I’d start by just sloshing some fresh gas around that tank to clean it before you clean it more throughly. Also might want to put some tank coating in it too. It’s like a paint you pour in and slosh around and it coats the tank. I had to do it on my ‘51 farm all super c.

[@HamiltonvilleFarm]

Thanks Isaac 👍

[@tripler3724]

We used coating in ours as well. While sloshing to clean, we would add a bunch of BBs to help loosen rust etc.

[@Very_Angry_Citizen]

Have yourself a relaxing Sunday and God bless your family.

[@HamiltonvilleFarm]

Thanks for watching 👍

[@michaelarmstrong5586]

its coming along great Hank ,carnt wait for next video

[@HamiltonvilleFarm]

Thanks Michael 👍

[@johnmccann1234]

Disappointed! Not one crescent wrench... 😎 Thanks for fixing this old girl.

[@HamiltonvilleFarm]

😂😂

[@astari39]

Love the tractor work!!

[@HamiltonvilleFarm]

Thanks Troy👍

[@shaneharrison4775]

Always a good idea

[@lisalanham9606]

Hank, great video you so well thanks for the great videos

[@HamiltonvilleFarm]

Thanks Lisa👍

[@TonysTractorAdventure]

Love this video series. I here chickens in the background!

[@HamiltonvilleFarm]

👍

[@davida.p.9911]

Seeing that gas makes me glad I use Stabil every season. Looking forward to seeing the progress and hearing it run. 😎🚜

[@HamiltonvilleFarm]

Yeah good call👍

[@deanbarr5740]

I noticed you do the same thing as me, when i remove a part, like a carburetor i reinstall the the bolts. I famous at loosing stuff. LoL

[@HamiltonvilleFarm]

Lol. Yep

[@robert-vt1fq]

That's going to be a good Humdinger tractor when you get it done brother God bless you

[@HamiltonvilleFarm]

I think so too 👍

[@bobbennett3153]

With it sitting outside and the gas tank full of water and mud I would be checking the hydraulic sump and filter for additional water and mud also check if there's a air filter for it😉😜😥 also check for junk in the trunk😄😄😃

[@HamiltonvilleFarm]

Thanks 👍

[@daviddudley1655]

Rebuild kit should still be available for that carburetor

[@HamiltonvilleFarm]

We rebuilt it this week 👍

[@kd5byb]

@@HamiltonvilleFarm EXCELLENT. :) 👍

[@alanstant9356]

I had went and watched another video for you Hank. This one was awesome to watch too. I love these ole wrenching videos. I cant wait to see the tractor running gain.

[@HamiltonvilleFarm]

I appreciate that Alan. It helps a lot👍

[@robertforget6369]

great show thanks guy

[@HamiltonvilleFarm]

Thanks Robert 👍

[@noonerstrickland1743]

Good job, boy that Gunk Remover cleaned that thing right up, impressive 👍🏼

[@HamiltonvilleFarm]

Thanks 👍

[@terrymangum3914]

Another great video Hank. I was delayed watching it because I was in your State in Jacksonville attending the National Fraternal Order of Police State Presidents and Board of Directors meetings. But I watched it as soon as I got back to North Carolina. Enjoyed the video and look forward to watching your progress on this tractor.

[@HamiltonvilleFarm]

Doing the Lord's work 👍

[@garyk.]

The choke is were the air hose hooked up and is controlled by the cable. the throttle is on top next to were it bolts onto the manifold and is controlled by the linkage.

[@HamiltonvilleFarm]

Thanks Gary👍

[@oliverfarmer-dx2qs]

When u put it back together make sure u do shut the fuel off after your done running it and make sure to put oil in the oil bath

[@HamiltonvilleFarm]

Thanks for watching and the reminder 👍

[@bearkatljl]

Ag teacher here, thanks for representing the FFA.

[@HamiltonvilleFarm]

You bet. The FFA is a wonderful organization 👍

[@mattcrofoot8715]

Some cleaner and marbles will make the inside of the tank look new, you can use rocks but they are hard to get out, and vacuum the rest out works great with rust

[@HamiltonvilleFarm]

Thanks Matt👍

[@garywilser7802]

A 3-4 foot piece of chain works pretty good also to clean out the tank. Leave the end of the chain out or tie some wire to it to pull it back out after you shake it around.

[@HomesteadJay]

Man the more you oil that thing the more she shines lol give it a oil bath haha! That patina is beautiful! I hope you have oiled the cylinders by now so its good and soaked by the time you start eventually cranking her!

[@HamiltonvilleFarm]

Not yet, but soon. I'll take the plugs out here ina few days. And then do it. Thanks for watching Jay👍

[@bobjoncas2814]

..good one, stay safe..

[@HamiltonvilleFarm]

Thanks Bob. 👍

[@ralphriddle8864]

Keep up the good work it is easy

[@HamiltonvilleFarm]

Yes sir👍

[@ralphriddle8864]

@@HamiltonvilleFarm I hope your are having a great holiday weekend God bless your and your family

[@chuckhaynes6458]

It's likely time for some actual Carburetor and parts cleaner. Gunk, Chemtool and Mac's are common brands. I prefer Mac's that you get at NAPA, although the others are OK. Completely disassemble the carb and soak it in the parts dip can for a couple hours then rinse with water to neutralize and blow dry all passages. I don't know how familiar you are with rebuilding carbs, so just a few tips. Before removing mixture and idle speed screws screw them in gently and count the number of turns to give you a starting place when re-assembling. Be careful with the float tabs that adjust the float height. Shake the float to insure there is no leakage. If you have an actual radiator shop have them boil out the gas tank. It just works better than homebrewed cleaners. Good luck with this Oliver project. Nice tractor. I once had a Cletrac Bulldozer they were merged with Oliver.

[@HamiltonvilleFarm]

We rebuilt the carb this week👍

[@shaneharrison4775]

You can clean it and you can get the screans and seal for it the bowl is a different stiry

[@robewalk2]

Dang Hank, when you were draining the gas tank, listening to the gas flow into the bucket, I had to pause the episode and to drain my tank!😰😨😃. I'm guessing a clean up and rebuild kit is all you'll need to get the carb ready for action. Great how to tutorial in today's episode Hank. You and yours stay healthy and safe and cheers from this old retired coot living in Tennessee.💖 👍 😷 🍻 👀 ✌ And yes, I watched another video of yours after watching this one.

[@HamiltonvilleFarm]

Thanks Bob. I sure appreciate it 👍

[@marklowe330]

Industrial strength vinegar cleans gas tanks really well.

[@HamiltonvilleFarm]

Thanks Mark👍

[@wildefox1478]

Great work on the old Oliver Hank, making great progress!

[@HamiltonvilleFarm]

Thanks 👍

[@bradhuston9198]

I hope you replace old parts with new ones I hate having to go back a nd redo something when I could have done it right the first time.

[@HamiltonvilleFarm]

Right on👍

[@bubbagreensmith7174]

I noticed that front tire is flat. But only on 1 side 🤣 Hank

[@HamiltonvilleFarm]

😂😂

[@lewiemcneely9143]

The cable was choke, the linkage was throttle and the crud from the tank was rusty water, looks like. Yall be good and GBWYall!

[@HamiltonvilleFarm]

Thanks Lewie 👍

[@lewiemcneely9143]

@@HamiltonvilleFarm Keep on getting dirty/greasy, Hank. It's GOOD for you!

[@neil6212]

Choke cable. Throttle linkage will always be the one closest to the manifold. Keep up the good and interesting videos! Get yourself some WD40 Soak or EvapoRust. Use enough to cover the bottom of the tank, then let it soak. And, it can be reused over and over. Soak that carb, too! (take it apart first, of course!)

[@HamiltonvilleFarm]

Thanks Neil👍

[@jackjacke4654]

That bent exhaust has my OCD goin!!! Straighten it!!! Ahh!

[@HamiltonvilleFarm]

Lol. We'll get to it😊

[@jaysmith262]

Ratcheting wrenches are a God send!

[@HamiltonvilleFarm]

Tell it all👍

[@jameslcoble248]

I would watch and like another video, but I have already watched pretty much every video lol. Plus I would rebuild the carburetor that way maybe get a little bit of experience in. Hope it's been a great week.

[@HamiltonvilleFarm]

Lol. Thanks buddy👍

[@jameslcoble248]

@@HamiltonvilleFarm y'all are very welcome.

[@roach1405]

on the carb there should be a metal tag on the side to tell the number of the carb like trx 658 that will be the rebuild kit you need not much to it make sure you get a new float for it the new gas they out will eat it up

[@HamiltonvilleFarm]

thanks!

[@ginggur17]

Howboutcha Hank and Gina. Big hi fives from across the pond. 👍👍🇬🇧🇺🇸

[@HamiltonvilleFarm]

Cheers 👍

[@AndrewHCann]

Love your videos Hank :) and do have excellent ones plus always plus team work with you too and keep up excellent job everyone! Also flush tank when off with Vingera and hot water mix together too !

[@HamiltonvilleFarm]

Thanks Andrew 👍

[@deeryalex179]

Love your videos and I can’t wait to see what you do next

[@HamiltonvilleFarm]

Thanks Alex👍

[@deeryalex179]

Hamiltonville Farm no problem can I get a shoutout next video

[@tomriggs3926]

Something to try on the carb, acetylene torch tip cleaners, a variety of rough surface rods in a fold up tool, work to clean the crud out of the passages. Use great care, breaking one off won't help the effort.

[@HamiltonvilleFarm]

Thanks Tom 👍

[@kd5byb]

Definitely rebuild the carb - rebuild kits are not expensive and the Marvel-Schebler's are good carbs. :) You've got the skills to do it. If I can do it, so can you! ;) McDonald Carb and Ignition in Jefferson Georgia are great folks to deal with and should have everything you need. Even if you don't see what you need on their webpage, shoot them an e-mail, they've got lots of stuff not listed on their webpage. Years ago they even custom made me a part for a Stromberg carb for an old Wisconsin engine I've got...

[@HamiltonvilleFarm]

Thanks for watching 👍

[@kd5byb]

@@HamiltonvilleFarm You keep making them, I'll keep on watching them. :) 👍

[@richardcole6690]

That little carb is so cute!! 😂😂

[@HamiltonvilleFarm]

Lol

[@michaelwittmann5103]

Can’t wait to see it restored and put to work and me personally I love your restoration content and the will it starts with tommy also more of mrs ginas smiles wouldn’t hurt thanks mr hank ! Also you need to hit the half of century progress farm show in rantoul il next year aug 26-29 some really Cool action there that I think would bring you some more viewers

[@HamiltonvilleFarm]

Thanks Michael 👍 I appreciate it

[@funwith9ball]

If you think that tank is rusty inside go to the dollar store and get thee or four bags of marble dump them in with some vinegar and roll the tank around for four or five minutes comes out like new

[@HamiltonvilleFarm]

Thanks for taking the time to watch and make the comment. I truly appreciate it! Have a good day.

[@fredbrooks6488]

Good stuff

[@HamiltonvilleFarm]

Thanks Fred👍

[@stephensaasen8589]

Makin' progress! You'll probably figure it out but I heard you say the cable is for throttle. It's actually the choke cable. The rod and linkage you disconnected at the top of the carburetor is throttle. It's backwards because it's an updraft carburetor. Those were good because it would be nearly impossible to flood the motor since gas can't drain down into the intake. They could be a little difficult if you had low vacuum, the gas didn't want to pull up into the carburetor. A lot of times compression can be temporarily low on a motor that's been sitting a long time but usually picks up. So it might be a little bit of a job to get it going but not impossible. Looking forward to more.😊

[@HamiltonvilleFarm]

Thanks Stephen 👍

[@shaneharrison4775]

Throttle linkage/governor, choke and fuel line

[@bosshogg6030]

great video buddy keep up the good work 😎👊🏻👍🏻

[@HamiltonvilleFarm]

Thanks brother 👍

[@bosshogg6030]

Hamiltonville Farm you are welcome buddy 😀

[@haydenuk02]

Keep up the hard work Hank and crew thanks for the awesome content stay safe and take care also can’t wait to hear it fire up

[@HamiltonvilleFarm]

Thanks Hayden 👍

[@haydenuk02]

Hamiltonville Farm No problem 👍🙂

[@marshallreynolds9604]

Class video hank been looking forward to this video for ages least u have the Manuals books to give u a reference of how things work there really hsndy when we build a tractor from scratch it was the most handy thing also hope use are all keeping well over there and I'll watch another video buddy

[@HamiltonvilleFarm]

Thanks. I appreciate it 👍

[@joeburkes760]

I like watching your KZbin video you are very funny

[@HamiltonvilleFarm]

Thanks Joe. We appreciate you 👍

[@DELirious97]

Who are you and what you done with hank? Using the right tools for the job this is madness 🤣

[@HamiltonvilleFarm]

😂😂

[@garyhunter6030]

You need to clean the jets in the carbonator. Make sure those jets are not clogged. Should be 2 or 3 jets to clean.

[@HamiltonvilleFarm]

We rebuilt the carb this week👍

[@justinbradshaw7321]

And I know it’s going to be very loud but put a whole bunch of bolts and nuts in that tank after all that old gas and everything is evaporated and swirl it around to get that rust loose then dump all that out and fill it with water and then let it drain out and do it one more time just to get all that rust out of there

[@HamiltonvilleFarm]

Thanks Justin 👍

[@Doogie_Causey]

I Could Watch Hamiltonville Farms Everyday

[@HamiltonvilleFarm]

Thanks Doug👍 we appreciate it

[@Doogie_Causey]

Y'all Are Welcome

[@markeholbrook]

If you have an old junk mechanical hard drive, they have two half circle extremely strong magnets in them that would fit around the fuel outlet and hold onto rust particles.

[@HamiltonvilleFarm]

Right on 👍

[@russelltrupia4479]

Toilet bowl cleaner, that sounds like a really stinky job Hank.( LOL )

[@HamiltonvilleFarm]

Lol

[@roach1405]

when you get to the pistons and rings when you order the parts the problem i had was i got a new piston they changed the design of the rings and piston style you might need to order all new piston and rings and on the crank watch out might not be able bearing the size you need so the crank will need to be ground to the size you can get

[@HamiltonvilleFarm]

Thanks for the tip👍

[@chrisclifton8889]

Hi Hank! That carb is very similar to the ones used on Ford 8n's. MS built their products to last. My '50 8n is still using an original MS that I rebuilt. Clean it up real well and get a full rebuild kit from Yesterdays Tractors (or even Amazon). They are VERY easy to rebuild, you just find that there are some small jets that are tricky to get to. I wouldn't buy a new 'cheap chinese carb' unless that one was cracked. Thanks for the great content!

[@HamiltonvilleFarm]

We just rebuilt it this week. Got the parts from tractor Joe👍

[@texasgilley9533]

Take that fuel tank To the radio shop and have it boiled out. Then buy a quarter tank sealer to coat the inside of the tank. I would rebuild the carburetor because all the seals are probably dry rotted from sitting so long you might be better off to buy a new carburetor on eBay

[@HamiltonvilleFarm]

Thanks for watching 👍

[@shaneharrison4775]

Aught to mark some baggies and keep them organized bud

[@HamiltonvilleFarm]

Good call.

[@justinbradshaw7321]

Yeah on the carburetor the bottom one is your choke the top one is your throttle it’s an updraft carburetor

[@HamiltonvilleFarm]

Right on 👍

[@shaneharrison4775]

It's a fuel drain and purge drain

[@gaffer6846]

Great work Hank. Enjoy watching your videos. I see you have upgraded from your crescent wrench 🔧 or what we call it here in good old Blighty (England) shifter or adjustable spanner 🔧 😂. Keep up the good work and videos coming. For more great tips, you might want to watch Mustie1 or watch Wes work. Mustie1 is always cleaning carbs on his videos. It give you a little more information about what you need to clean and inspect on it. Look forward to the next video.

[@HamiltonvilleFarm]

Yeah me and Wes chat often. Great guy,great Channel 👍

[@shaneharrison4775]

And the gearboxes and hydraulic system

[@HamiltonvilleFarm]

It should be alright 👍

[@robertbullcarmichael9856]

Everyone of my carbs I just cleaned and reset. They clean up very well. I think I only had to replace a float in one.

[@HamiltonvilleFarm]

Cool

[@camerontrathen7102]

Hank can you give the link to where to buy manuals? great seeing old iron coming back to life keep up the great videos you do

[@HamiltonvilleFarm]

www.jensales.com has them👍

[@kencobb4834]

Love your content!

[@HamiltonvilleFarm]

Thanks Ken👍

[@millardhayes1884]

The needle seat could be really rusty. Might try soaking it in carb cleaner. Dad gets it from NAPA. You may want to let it soak a couple days to see if it will get the Gump out.

[@HamiltonvilleFarm]

Thanks Millard 👍

[@justingoodrich2519]

Y'all are doing it smart, soaking rusted bolts, slow teardown and research as you go.

[@HamiltonvilleFarm]

Thanks Justin👍

[@michaelparker9886]

Be careful with the lower carb half I had same carb on my allis chalmers d12 it cost a pretty penny to replace it when it cracked

[@HamiltonvilleFarm]

Cool. Thanks for the tip 👍

[@michaelparker9886]

@@HamiltonvilleFarm oh no problem if u do need a carb find new old stock those aftermarket ones suck they fit 20 different tractors and just look terrible

[@codyvincent4699]

Uratic acid works the best cleaning rust out of a tank. I did one myself and looked brand new inside

[@HamiltonvilleFarm]

Thanks Cody👍

[@terryturner4513]

The bottom cable is your choke cable the top linkage with the rod that is your throttle

[@HamiltonvilleFarm]

Thanks Terry👍

[@justinrobertson1590]

Rebuild it. 👍🏼

[@HamiltonvilleFarm]

Right on👍

[@dans_Learning_Curve]

Like #336 Thanks for the video?

[@HamiltonvilleFarm]

Thanks for watching 👍

[@shaneharrison4775]

Have been and often

[@AkDadStuff]

Heyhey Hank I see you have a predator work bench. I use a generac work bench myself.

[@HamiltonvilleFarm]

Lol. I hear ya

[@davidgerber9907]

Clean the carb; soak it, put a quality rebuild kit in it; and it should be fine.

[@HamiltonvilleFarm]

We rebuilt it this week👍

[@Gen_X_Jimmy]

Get yourself an ultrasonic cleaner Hank

[@HamiltonvilleFarm]

My PayPal account is....😂