Stiletto light weight, gimbaled O3, and radars

[@kiinnayskl]

merci pour tes vidéo, c'est toi qui ma donner l'envie de faire du fpv avec mes ailes volantes

[@jaysonrees738]

Almost have your Scimitar printed out. Have been watching all of your build videos to get a better feel for how all of this is done. Thanks so much for the things you share!

[@ericwright7570]

You have the coolest videos 👍. I’m always showing them to people. I didn’t know about the inav radar by the way. Très cool.

[@Jetseb89]

Salut Olivier. J'utilise les filaments 3dlabprint (PLA et LW-PLA) pour tout mes avions et je n'ai pas encore trouvé mieux. Le filament s'imprime facilement avec un superbe état de surface et en plus c'est pas cher. Le seul souci est qu'ils sont souvent en rupture de stock donc il faut regarder régulièrement le site mais on reussi toujours a en avoir. J'aime bien le stiletto. Je vais certainement l'imprimer une fois que j'aurai terminé ceux que j'ai en cours (oui je suis un serial printer 😊).

[@Jean-FlyFPV]

J'utilise les mêmes, et clairement le rapport qualité/prix est excellent! Du coup le PolyAir est devenu mon fil de tous les jours. J'ai eu quelques variations de couleur avec le LW Signal Grey, mais sinon c'est top.

[@EMSXT]

Thanks for sharing your experience,,, I learned a lot from you,,, keep the great work,, I will start printing soon,,,, thanks

[@mauritz1774]

23:32. The Tail Servo steps out, what if you route an Cobtroll Horn Z Bend to the servo Horb, and Locate the Servo somewhere in the Fuse?

[@AerialWaviator]

Excellent flying. Looks like you have more a tail-man, then a wing-man. Always stuck on your tail! Agree 100% (5:00) with needing to have a dual-HD video switcher. Am surprised such does not exist, even as an inline device between camera's and the VTx. Am guessing the different colours have slightly different properties that effect amount of foaming at a given temperature. (11:45) Printing a temperature tower at constant flow rate would allow to calibrate a temperature offset (between colours) to get same wall thickness. The result of applying the lacquer appears to give great surface finish. (26:45). Wondering how much weight is added by this process? If just a few grams, definitely worth the extra finishing effort. Thanks for sharing. So much great content in just this one video!

[@RollnHeavyKevy]

Love the videos. Thank you. Almost have mine done.

[@henrirotthier5710]

J'adore la peinture sur le swordfish. Excellente vidéo

[@alantoseland6629]

Yet another excellent video, just one question. The 3d print for the DJI goggles battery looks very convenient and practical. Do you have a file to share, please

[@ColtonCampbell]

Any issues with the black PLA / LW-PLA warping in the sunshine, even in open air?

[@ColtonCampbell]

Hey Olivier, I have been loving your flight footage. Thanks for taking us along on the adventure! Would you mind sharing how you make the OSD overlay for your flight footage?

[@Olivier-C]

hi! I have this rather old tutorial, but it's still valid : kzbin.info/www/bejne/gnbNpnWJmMipfbM I'll maybe make an updated one with all the newest filters some day, but that takes a lot of time

[@ColtonCampbell]

Thank you!@@Olivier-C

[@emmanuelsab1095]

comment obtiens tu cet affichage de la télémetrie sur tes images? ça ne ressemble pas à du inav; qui génère cet OSD trés propre?

[@mauritz1774]

Can you make an Video with Cura Settings? Not found much Videos for this type of printing

[@emmanuelsab1095]

avec quoi pilote tu le gimball? comment obtiens tu autant de rotation de la part du servo?

[@nanomiterctech423]

Hey buddy ! Can i 3d print and sell the planes designed by you ? ( Not the STL files, the 3D prints themselves)

[@Olivier-C]

Hi, if you only sell the prints that's ok I guess, but please don't sell the 3MF files.

[@nanomiterctech423]

@@Olivier-C done deal , thankyou buddy !

[@handsome_andrew]

It looks really cool) What is the main difference between single and twin-engine models? Will the twin-engine have a higher lift weight?

[@OZSCQUADS]

love you videos. How do you get the telemetry figures on top and bottom?

[@johnchurch2321]

Love the design. Did you make the 2 axis version of the gimble for the swordfish?

[@nickname753]

Super vidéo comme dab ! Pourras-tu nous montrer la prochaine fois le DVR avec le radar (esp32) de l'OSD. Jamais vu en HD le résultat

[@Olivier-C]

Oui c est prevu mais mes V2 n enregistre pas la couche OSD donc faut que je demande ça a un de mes camarades qui a des G2

[@olisandy0]

Salut Très beau travail. J'aime bien ta démarche d'optimisation progressive. Tu es en HD ? Comment tu as fait pour avoir un OSD avec Dji ? (Une FC en plus ?). Et sinon ta puissance d'émission ? Chez studiosport, le tech me disait qu'en O3+, ils avaient constaté un bridage à 25 mw malgré leurs efforts. Pour info, dans le domaine pla+, j'ai testé le esun pla super ténacité : très concluant. Il y a une très nette amélioration de la résistance et surtout élasticité avant rupture. Sur 3 avions c'est très concluant. Sinon, visiblement, la solution consistant à utiliser de la résine époxy sur lw-pla semble la plus résistante (essais de Renée roesentragher sur son site). Cordialement Olivier

[@Olivier-C]

oui en DJI O3, l'OSD marche avec INAV, pas de problème. Il faut regler l'OSD sur le mode BFHDCOMPAT. On a même les marker 3D de nos radars etc. Chez studiosport ils savent pas mettre un fichier sur la carte SD visiblement........ Merci pour l'info pour le ESUN-HT, j'en ai une bobine, mais pour l'instant j'ai juste imprimé quelques petites pièces, pas eu l'occasion de faire un avion avec. J'ai aussi du HS (High Speed) de chez Esun, pas trop eu le temps d'approfondir non plus, trop de trucs à tester :) Le prochain avion sera (est, déjà imprimé) en polymaker polylight pre-foamed. Ca marche pas trop mal mais c'est hyper cher au final

[@olisandy0]

Pour info, après 2 avions construits, pour moi le triplé gagnant c'est lw-pla + le fantastique remplissage "giroid" de cura et une couche de résine light de stratification (je tenterai peut être avec du 25g). J'utilise le profil P5 d'impression de planeprint : nickel. G pas trouvé ton mail.. Amitiés Olivier

[@mauritz1774]

25:20 Camera Nose Mount Hot Glue, I Would put UHU Por on the Cam Mount, let it dry full. And after the UHU is dryed i would friction fit The RAM Holder, becurse Uhu is so Rubber Coatet. It would reduce the Force on the cam in case of crash

[@MONSTERPC-el9hh]

hi oliver , ı'm wondering if we can use any alternative of carbon tubes because it's too expensive in turkey also ım thinking to use 3s lipo but ı don't know does it can fly the stiletto because it's a big rc plane .

[@Olivier-C]

Hi, 3S should be ok for the Stiletto, but it really needs carbons tubes, even the best PLA is not strong enough when printed so thin, it needs a structural backbone of carbon

[@brubakerjm]

Do you think that, for your designs, the foaming LW-PLA is worth the extra effort (e.g. varnish, cleaning holes, cleaning stringing, extrusion issues on parts, two walls on certain parts, etc.) to save the 30% weight?

[@Olivier-C]

Wells it depends, on some parts the ain can almost be 50%, and some are less "dirty" than others, as sample the LW works really great for wings tips, main wing panels, so I'd say the best way is to mix different kind of plastics on a plane, to optimize weights and structural strength etc

[@NUeB_RCFPV]

One day I have to try out how lightweight *and* strong wing parts printed in resin can be. Much less restriction in geometry and super smooth surfaces right out the printer could make a difference.

[@darkwingfpv]

Try a mix of TOUGH and BLU... 50% to 50%. Extremely durable, have even used as convergence divergence rocket nozzles. Heavy, so use sparingly.

[@EMSXT]

Hi Oliver,,, which printer you are using plz?

[@Olivier-C]

Bambu Lab P1P

[@EMSXT]

@@Olivier-C thanks boss

[@David-gk8yg]

How much flight time/distance are you getting on the Stiletto with your current setup?

[@Olivier-C]

Not much, its with very small batteries, 4S 1500. Flight time is about 12 mins

[@David-gk8yg]

@@Olivier-C And how much time to do get with Sabre? Thanks

[@Olivier-C]

Same battery, similar times, these 2 are not long range runners :)

[@trnnesseeMAGA]

Thanks so much

[@Slash7FPV]

"Accelerate a bit"... The Drak pulls away easily from the SFish ;-)

[@emmanuelsab1095]

magnifique ces images. le fun doit etre x 10 de voler en escadrille.....

[@EnglishTurbines]

Have you ever considered 3D printing a mould and then filling it with expanding foam??...So you get a traditional foam plane...?...🤔😳😏🇬🇧

[@Finnv893]

Dollar store foam yes but not with epp, buying premade blocks of desired density and cut them to shape is still the best option.