Insulating a Garage, Adding Outlets, and Installing OSB Panels /Ollari's New Workshop Part 2.

[@hadejames3012]

Save yourself time and money by building a frame and then bolting the frame to the wall with less bolts.

[@Ollaris]

Oh yes! Good call! That was a pain in the .... to drill all those holes!

[@1953JJMMCC1953]

Estopa

[@SA-bx9cp]

The best video on how to line a garage with OSB panels, the template baton is simple but genius, many thanks

[@jorgeherrera1505]

Me hipnotizó la guitarra. Gran trabajo.

[@errolcostin631]

This is a job that I am about to start.so found your video very help full ,thank you.

[@BillSinWorkshop]

Very good filming and an awesome workshop man!!

[@Ollaris]

+BillSin Workshop Thanks my friend! ;)

[@redyeti7371]

Clean, precise work! It was a pleasure to watch!

[@Ollaris]

+Chad Feeser Thank you Chad!

[@newbeginnings8566]

No air gap between insulation and OSB panels , no vapour barrier.... Look forward to damp and mould coming through... If fitting a frame, best to drill through the wood battens and into the wall.. Then use hammered in screws... Or you'll have alignment issues and waste time.. On older homes like this you need to look at breathability in the walls or you'll have problems..

[@Makebuildmodify]

Looking great! I did the same thing to my shop and office. I love it! You can hang anything anywhere. If you paint the OSB use a good stain killer first. It bleeds through without it. I learned the hard way.

[@Ollaris]

+Make Build Modify Thank you Justin! I will keep that in mind!

[@Ollaris]

Thank you! sadly i cant find this here. but i think i go with a BLO-primer mix

[@Ollaris]

+P Cs Thanks, oh! You don't need to apologize! Yeah I think I go with the Primer-paint route. Its simpler and cheaper than the BLO primer mix.

[@s.spiegel3032]

I like that you didn't talk and just showed the work with easy guitar music. A plesant change to all the usual overblown sponsored-youtuber-influencer-videos! *like*

[@casatagini]

Excelente trabajo y la musica es una muy linda milonga !!!!

[@andrewmyers7131]

Very nicely done. I am always impressed by your quality.

[@Ollaris]

+Andrew Myers Thank you very much Andrew! Glad you like it!

[@waynebeck7801]

It’s good to see someone on you tube wearing PPE

[@milojenikolovski7522]

Very nice, OSB looks good.

[@Ollaris]

+Miloje Nikolovski Thank you! Take a look at part 3 how it looks now!

[@AnimosityGamers]

Just did this process from my baby barn shed which came with the house I bought. Im trying to make it into a little shop for myself and I didnt know what to do with the doors, which have a gap in the middle and are basically just plywood barn doors like you had. Foam board insulation with strapping and OSB, So simple yet effective, Thanks for the solution!

[@Ollaris]

Awesome! Have fun with and in your shop!

[@jgclark45]

looking forward to seeing your finished shop

[@Ollaris]

+jgclark45 Thank you!

[@BCdesign1]

The shop is looking great Seb you did a fantastic job!!

[@Ollaris]

+BCDesign Thank you!

[@opasworkshop8373]

Coming along just great Sebastian. Nice work my friend can't wait to see you get it all set up.

[@Ollaris]

Thank you very much Opa!

[@heikow.7627]

puuuuuh, was viel Arbeit. Aber sehr durchdacht und schön gemacht!

[@Ollaris]

+Heiko W. Dankeschön Heiko! Ja es wird langsam... ;)

[@XCreator]

workshop beautiful

[@Ollaris]

+X Creator Thank you!

[@xdygmnyrdf]

Fantastic job, you make it look easy.

[@Ollaris]

Thank you! It wasn't easy. It's just on the video!

[@furqanandammar6031]

Brother it's really clean, nice & wonderful.

[@Ollaris]

+mfn's Thank you very much!

[@JENNISWISS]

das wird ja wie in einem wohnzimmer! super cool!

[@Ollaris]

+JENNI.SWISS ja ich hoffe doch ! ;) wenn erst der Teppich rein kommt!

[@MIKECanal]

Nice layout , but one thing to remember, when you have concrete walls and floor if you put your stats directly in contact with cement those will collect moisture in the long run and you need to change them more often than you think. You can add between wood slats and wall a rubber or pressed cartoon as a barrier and eliminate direct contact.

[@Ollaris]

Thank you for the tip!

[@MrSaturn7085]

I thought of this when watching it, as well... but more for the sake of the insulation. Won't that wick up moisture and mold like crazy in short order?

[@yosefyeshayah379]

👍

[@inetkomp]

Красота!

[@MadeinPolandChannel]

Great job buddy!

[@Ollaris]

+Made in Poland Thank you! And thanks for subscribing!

[@trish5649]

молодец,парень!Все красиво и без пафоса!Удачи!

[@EDDYGARAGEShop]

Bellissimo il lavoro fatto nel garage ,complimenti nice work on your garage, compliments ;)

[@Ollaris]

+EDDY GARAGE Grazie mille! Glad you like it! I have finished it since and working in it already.

[@terminator4974]

That wool stuff is not gonna get wet? Shouldnt it be some distance from the wall?

[@RobinLewisMakes]

That's a lot of OSB! Looks good so far man, can't wait for part 3

[@Ollaris]

+Robin Lewis Thank you Robin!

[@billwilliams9897]

Im doing this to my shop as well. After painting some of it Im really liking it, and beginning to wonder why more people dont use this instead of sheetrock. I like it better then sheetrock.

[@Ollaris]

Yes it's much better suited for shop use, you can put in screws wherever you want!

[@OSODIY]

Good job Seb. I know this is an older video but I plan on using OSB in my garage shop soon.

[@Ollaris]

Thanks man!

[@Thesidingsworkshop]

Very good mate

[@DanielaRouge]

So beautiful! I'll do the same for my garage. What about the roof? Does your garage have an attic? Mine does,t. How should I insulate it? Thank you so much!

[@techguy9023]

How has the OSB held up? Any problems with moisture?

[@Ollaris]

I don’t have any issues with it. Holds up just fine. It was a bit smelly for the first month or so. I’ll guess that was the glue.

[@CompTechMike]

What are those round things on the walls?

[@simonem93]

Bravo, un lavoro coi fiocchi!

[@Ollaris]

+simone m Grazie Mille!

[@AllesohneKabel]

Gute Arbeit, die Werkstatt wird echt super! 👍

[@Ollaris]

+AllesohneKabel Dankeschön! Ja sie wird langsam!

[@mateuszj47]

Nice work, but why didn't you install vapor barrier behind OSB?

[@christianjung2410]

Tolle Arbeit !

[@Ollaris]

+Christian Jung Danke Chris!

[@Stephens8x6Workshop]

Looking really smart☺

[@Ollaris]

+Stephen's 8x6 Workshop Smart or small??? :)

[@Stephens8x6Workshop]

Smart. At 2.450 x 1.860mtrs mine is small compared to yours ☺

[@Ollaris]

+Stephen's 8x6 Workshop haha! Yes it is almost the double.

[@woodperfect]

Why did you put insulation against a concrete wall no vapour barrier or air gap?

[@MCsCreations]

Really nice work, man... It's going to be a great workshop. :D

[@Ollaris]

Thank you! i hope so!

[@AddictedtoProjects]

Awesome job and great eye for details. Well done! =)

[@Ollaris]

+mictho100 Thank you very much!

[@RIOHOTRIO]

Золотые руки! О-Т-Л-И-Ч-Н-А-Я работа!

[@CammiesGarage]

Looking good so far. Keep up the great work.

[@Ollaris]

+Cammie's Garage Thank you very much!

[@RohnB]

That's going to be an awesome space. Did notice a typo in the video title. Keep up the amazing work.

[@Ollaris]

+Rohn Benedetti Thank you! Really? What did I spell wrong?

[@TheTxnomad]

Where did you get OSB without stamping

[@Fabian-zu9pm]

i need to get that done in my garage

[@Fabian-zu9pm]

u did a nice job wat state are u in ???

[@Ollaris]

Thanks!Whole diffrent country! 😉 actually continent. Hungary. (Europe)

[@Fabian-zu9pm]

kool

[@Cactusworkshopchannel]

lot of work there! nicely done!

[@Ollaris]

+Cactus! workshop oh yes! Thank you! ;)

[@MegaSoyaMan]

super travail , chappeauuu

[@robertj7698]

Good job! 👏

[@Ollaris]

Thanks 🙏

[@sdlivin4907]

May i ask why why you went with Rockwell?

[@OficinadeMadeira]

Gostei do isolamento do espaço o bom tbm é que não precisa nem de painel de ferramentas vai tudo na parede direito. ...

[@diggerdeb]

Shop is looking great. Loved the music.

[@Ollaris]

+Deb Malloy Thanks Deb! Have a great day!

[@OrangeJackson]

How did you know that the holes in the walls would line up with the screws going though the studs?

[@Ollaris]

I made a drill template (the white thing) which I used on the wall and the studs.

[@OrangeJackson]

I see. Thank you for the tip.

[@juanpabloecuador]

Excelente video

[@paulf3358]

How many R value of that material? Isn't that mineral wool you're using? No green plate on the floor? They sell sheathing with 16 and 24 marks for framing... I commend you for your work and dedication.

[@Ollaris]

+Paul F sorry they don't measure that in R value over here. I don't know what that green plate is, I never seen markings on our OSB plates, at least where I buy my stuff. Thank you!

[@crpth1]

Paul F - If memory serves well Rockwool should have an R value of >4 per inch (US units), I believe is using 5 cm (2 in) batts. 40 cm (16in) can be found in Europe, but by far the most common is 60 cm (24in)

[@gerardaarle]

no damp screen ??

[@kovarigyula]

Nagyon jó lett! Ügyes, szép munka. Láttam, hogy Evolution típusú barkácsgépeket használsz. Ez milyen márka, hogy vagy vele megelégedve, hova lehet kategorizálni minőségben és hol lehet őket megvásárolni?

[@Ollaris]

Köszönöm! Angol Cég gyátja ezeket a gépeket, Az ár érték arány teljesen megfelelő, körülbelül közepes minőségűnek mondhatom kategorizálni körülbelül a Zöld Bosch mellé helyezném ami persze nem egy Dewalt és messze elmarad egy Festool tól. Sajnos tudomásom szerint jelenleg nem kaphatók magyarországon. és a gyártó nem is tervezi a közeljövőben.

[@kovarigyula]

OK Köszönöm! További jó munkát!

[@nelmacosta4654]

incrível transformacao!!!

[@Ollaris]

+Nelma Costa Parabens

[@paulnezzo7916]

Výsledek je fajn, osb desky pěkné, ale závěr po zavření vrat je mezera pod dveřmi? Na co je to zateplení...

[@Tornad0_73]

Молодец! Все аккуратно и красиво!

[@tonybp965]

Dang dude, that's some job man. If only things went just as smooth for me. Nice freakin' job bro.

[@Ollaris]

+Tony Bryce Perez Thank you Tony! Nothing is so easy as it seems ;)

[@Strubsch]

I love OSB panals

[@OLPandW]

Enjoyed the peacefulness of this video. What is that song!? It's been stuck in my head and I love it!

[@guyfawkes5410]

Я так понял ,проводка вся под ОСБ листами...а мыши не поедят?

[@CompTechMike]

What is the old material you're covering over? It looks moldy.

[@FamilyFlow]

Nice job, it's clean 👍👌

[@Ollaris]

+Family Flow Thank you! :)

[@barstad-9591]

Job well done. It looks great! 👍

[@Ollaris]

Thank you!

[@bmallegol3167]

No air space between wall and insulation?

[@Ollaris]

No.

[@vanderleipereira2684]

Olá, qual tipo de parafuso que vc usa para fixar o osb na madeira ?

[@marialeticiaiseas169]

Como se llama esa madera ????,pregunto de argentina.

[@chybz]

Hey Sebastian ! Much nicer place now, you've done a really great job !

[@Ollaris]

+Remy Chibois Thank you very much Remy! I hope so ;)

[@fynbo1007]

Great job done, looking forward to seeing more of your journey in your new shop. Thank you for sharing your amazing video

[@Ollaris]

+Carsten Andersen Thank you very much Carsten!

[@mihumus]

Looks great brother!

[@Ollaris]

+Humus Workshop Thanks Bro!

[@normanboyes4983]

Nice video and I am going to subscribe.👍 can I ask a few questions? 1. Now that you have installed insulation how are you going to handle condensation - I note that you did not install a vapour barrier prior to installing the OSB. 2. I note you are wiring your outlets with a single cable - this means they are all acting as spurs - should you have not run the outlets as a ring circuit (one cable into outlet, one cable out)? Good job though.👍

[@Ollaris]

+Norman Boyes Thank you very much! I have built in an automatic ventilating fan in one corner of the shop. The electrical is a 3phase that goes to 2 boxes on opposing walls and then different phases go to the individual outlets.

[@mondzi1987]

👍👍Best job! Ollaris!! 😁😁

[@Ollaris]

+gergő Mondzinger Thank you! ;)

[@anthonymaryland]

Great job!

[@Ollaris]

+Gary Maryland Thanks Gary!

[@sandrahelenapacheco9880]

Muito bom!!! Gostei bastante! Por que você usou madeira no lugar de guias e montantes metálicos para fixar o OSB? Ficou mais barato? Que madeira era?

[@Ollaris]

Obrigado! muito mais barato que pinheiro

[@Н.А.В-э3у]

Sandra Helena Pacheco Шо ты говоришь не пойму.

[@alonso9248]

I dont know if you insulate the ceiling on vid 1, there´s the biggest lost of heat of a room.

[@salvatoresalvio204]

BELLISSIMO - BUON VIDEO COMPLIMENTI SALUTI SALVIO

[@allthings2allmen]

This is a wise man wearing the protective suit & breathing apparatus. I can't barely touch that stuff anymore. I can handle poison ivy & natural stings and so on but that fiberglass gets in to the skin & lungs & I am NOT exaggerating! people can harrass you about other safety nellies but this is legit. way to go Olaris nice to see you are able to upgrade your shop!

[@Ollaris]

+Jason Gardner Thank you! Yes its a pain and totally not worth to mess with that stuff!

[@crpth1]

Jason Gardner - Although all the protection is welcomed. An important note, he's using "Rockwooll", not fiberglass. Rockwooll is not as bad as fiberglass, it's a MUCH more "friendly" product, if we can use such a word. As better insulation, soundproofing and moist resistance capabilities. Only fault by comparison... It's more expensive. :-( With this said I run from fiberglass as much as possible. :-)

[@hcracer1985]

Good stuff. Liked it. Instant sub!

[@Ollaris]

+Msp-Protege Thank you very much! Hope you like the rest too!

[@dupablada2951]

Bardzo fajnie i pomysłowo zrobione

[@Alcatraz252]

Great video! I like the music in this one. Does anyone know the title?

[@Ollaris]

Gillcudy- Adventure ,Darling

[@Alcatraz252]

Ollari's Thanks! Can't wait for part 3

[@Ollaris]

+Alcatraz252 :)

[@ShogunJimi]

my shop need the same kind of face lift - when you heading over - LOL - great job!

[@Ollaris]

+Shogun-Jimi haha- no thanks!

[@jarek202020]

Bardzo dobrze to zrobiłeś

[@gergemall]

Thank you, very much, great job.

[@Ollaris]

Thank you Jon!

[@about_midnight]

That's a lot of OSB - aren't you worried about formaldehyde emissions?

[@Ollaris]

Not really. It’s been painted since than.

[@mrnani1391]

Excellent job

[@Ollaris]

Thank you very much!

[@Yodha4U]

Can you explain why you add that sponge thing ?

[@Ollaris]

+Yodha that is the insulation! It keeps the cold out and the warm air in. Also it reduces the noise!

[@debuti]

Ollari's is it toxic? Why did you wear that plastic thing?

[@Ollaris]

+Chisco Garcia Gonzalez its not toxic, but this stone wool is like glass wool, the fine fibers get into your lungs, and when you get them on your skin it itches like bee stings. So its better to wear long sleeves or a painters overall.

[@acmarceneiro]

Show de trabalho,parabens.

[@Ollaris]

+ac marceneiro bj Thank you!

[@WesleyRanieri]

otimo Video Fiz esse mesmo trabalho no meu home-studio e realmente funciona muito bem para o custo x benefício.

[@gisarocha7848]

Vc pode me informar qual o nome dessa manta que põe entre a parede e as placas de osb?

[@araxisvvv802]

Красиво конечно, но забыл изолон проложить. Что бы тепло не уходило в стены, а отражалось внутрь помещения...

[@JedidiahShultzIrishCraftsman]

That shop is looking great Sebastian!!!😊👊👊 OSB is a common theme in my shop as well!😉💪🏻 do you mind if I mention you in next weeks video?😊

[@Ollaris]

+Irish Craftsman Thank you Brother! No! Not at all. I would be honoured! :)

[@JedidiahShultzIrishCraftsman]

Ollari's you're very welcome and thank you brother!!!😊👊

[@Adkiz69]

job welldone!

[@sumosprojects]

That's great what you've done, where are you from mate ?

[@Ollaris]

Thank you! Im from Hungary.

[@romanmaly2022]

Elegancka robota

[@rafaellg6804]

Cómo se llama esa esponja que usaste

[@watchere]

All that amazing insulation work and those gaps under the garage door =(