Ollie's 4x4 Willys Mini Jeep car Build EP 10. 4 Link Suspension Plasma Cut Metal Folder

[@gregscherf9385]

Keep up the good work. Can't wait to see this project completed

[@oliverbanford]

Thanks for watching!

[@samakesouleymane2799]

J'adore ça.

[@oliverbanford]

Thanks for watching!

[@hasebnzeha8917]

عمل رائع صديقي هل الهيكل ٤×٤سم

[@oliverbanford]

The chassis is 50mm x 50mm x 2mm mild steel box section. Thanks for watching!

[@hasebnzeha8917]

@@oliverbanford شكرا صديقي انت رجل محترم

[@oliverbanford]

You are welcome 😊

[@hasebnzeha8917]

صديقي المحترم عمل ممتاز شو قوة المحرك لو سمحت

[@oliverbanford]

It's a TRX250 quad bike engine, it should put out around 20hp. Thanks for watching! 😊

[@hasebnzeha8917]

@@oliverbanford شكرا صديقي

[@oliverbanford]

You're welcome!

[@luisylinda]

Excelente proyecto un saludo desde Ecuador no sé si me podría ayudar con la guía de la dimensiones y los cortes para poder hacer este proyecto y si se puede utilizar el motor de una moto 250cc

[@oliverbanford]

Thanks for watching! If you need any measurements just drop them in a comment. I've used a 250cc Quad bike engine in this project so your 250cc MC engine should be fine, easiest with a shaft output though unless you're going RWD 😉👍

[@stevenpleasant5834]

Hi Oliver real nice building skills you have looks real good how are you going to do the drive yoke on the motor and what is the transfer case out of thanks for your info keep on building.

[@oliverbanford]

Hi Steven. I have the spring loaded drive yoke from the quad, which we will mesh with the drive shaft from the transfer case. All of the running gear is from a Suzuki Jimny, we shortened the axles to make the mini Willys Jeep :) Take a look at the earlier episodes.

[@samakesouleymane2799]

S'il te plaît les dimensions de cette jeep.

[@oliverbanford]

I will post them if I ever get round to transferring them from the back of the cigarette packet 😎👍 Every dimension is exaclty 4/5 the scale of the original Willys Jeep, so 80% of full size. We took the measurements from a 1/12 scale model. Thanks for watching!

[@praveenkharvi7545]

Bike engine gear system video upload

[@oliverbanford]

Thanks

[@kingtut5923]

music has to go

[@oliverbanford]

Thanks for the feedback