Om606 turbo with om603 diesel pump

[@onwheels8232]

What a beautiful sound it has this engine both at idle and when reving

[@dieselgeezer18]

i love the diesel knock at idle

[@jefkeintwestvlaams5226]

what an amature, he's fucking up his alternator

[@IvanIvanov-pn5dy]

Классый свап комплект👍👍👍

[@yarii27]

love the sound of it, where did you hook up gearbox cooling lines, I can't see radiator?

[@WARD5KUSTOMZ]

Sounds good

[@arewethereyet6413]

Yet no shots of the aforementioned pump. Duh..........

[@kevinngare1026]

we wanted to see the pump in action not the engine

[@senormystery721]

So the turbo is blowing into which hole again??

[@ismaileren1488]

Bu motor om 603 değil om606

[@marccon5007]

that tiny turbo is suffocating the poor engine

[@no-damn-alias]

No it gives you low end torque, which is what you actually want when you're a daily driver and not being 14 and never have driven a car

[@Diesel8290]

14725800369 I’ve a om606 and a gt35 turbo, and it’s a great daily driver, these engines are better revved out it still pulls hard to 6k, not your typical diesel shit that’s out of puff by 4K rpm

[@no-damn-alias]

@@Diesel8290 well at least I want torque from 1500rpm on as this is the rev range I use in daily driving with an automatic gearbox

[@Diesel8290]

14725800369 yeah I’m building a om606 for my 190, using an auto and vnt turbo for great drive ability and smoothness

[@christian2415]

@@no-damn-alias no you do want a bigger turbo for more boost.

[@cuzy18]

how many hp can produce a stock om606 with stock turbo and om603 injectionpump with 5.5 elements?

[@JoeHeine]

Plenty

[@anassnouri6129]

Did you max out the stock pump ?

[@TOMOSRIDERSFORUM]

I put a motor on a boat and I have a pump 603 but how to get rid of the wastegate problem on the 606 engine works over the vacuum while I need to work on the pressure. What wastegate do I have to get?

[@ahmadzein1109]

the wastegate is internal you need a wastegate actuator that works on pressure and make a bracket for it to sit on

[@expressyourselfist]

I did this swap, just buy universal pressure activated waste gate actuator that fits Garrett turbo, and adjust length of the shaft so it fits. Pick one that can do 6 to 30psi boost, or whatever your engine need.

[@JoeHeine]

Different engines... how does the pump work on it?

[@SBT300]

It fits directly.

[@JohnSmith-qj4cf]

Im sold where do I buy one please

[@y2kxj]

What wires are you hook up for the fuel shut off?

[@ahmadzein1109]

It is manual

[@mubarakpasha5011]

y2kxj is u

[@expressyourselfist]

I installed a push pull cable to manually move the shut off lever from inside of the cab.

[@yetzbiker4995]

why do you put om603pump on an om606?

[@donnguyen7833]

It’s to make it all mechanical basically no ECU

[@aziznortey1106]

Can the transmission work with the manual pump ?

[@jumpspace7414]

The transmission has nothing to do with the Injection pump.

[@sv_cheats1970]

@@jumpspace7414 it does on a w210 if its automatic

[@mnmn3925]

🤩🤩🤩🤩🤩🤩

[@yngvardharjo3704]

all engine go on wather

[@scottyemmanuel3610]

Are you selling?

[@ahmadzein1109]

Scotty Emmanuel sold out

[@scottyemmanuel3610]

@@ahmadzein1109 am so looking for this motor

[@nicolasp7395]

@@ahmadzein1109 bro, why you install a 603 pump?

[@ahmadzein1109]

Nicolás P inorder to install it on an old mercedes w126 less wires less electronics less problems

[@nicolasp7395]

@@ahmadzein1109 okey good option, the original was to be Electronic pump so?

[@ricardosantos2599]

1048576 game or 2^20