Dieselmeken show OM606 in dyno 427hp 700 nm

This is a small clip showing our pre work, After the engine is buildt up, we test it with water etc so its OK for a dyno run, No leaks etc. When the engine is ready we can ship it to the customer with a nice laminated test result showing the real numbers.

[@heiko272]

Awesome! This is exactly what I want for my '95 F150. Was looking at the new 2.8 Cummins crate engine, I think this one is a lot better. Like the fact of no electronics and that it can run on veg oil.

[@bsdguy]

Wow. I wish I could get my OM617 to his shop.

[@pierosiragusa9061]

good evening Mr. DieselMelken I am writing to compliment you, we are distant colleagues. I am writing to you from Sicily precisely from the Province of Palermo, I am also a Dieselist for 20 years with my owner who has been doing his videos for 45 years and I am proud of the work what we do because ours is not work but art, his style of work is very similar to ours and this makes me very happy. I very much hope that you read this message, I would like to share our passions. best regards Diesel Test (of Palermo) 👍👍

[@apuuvah]

One of the best diesel engines ever made. Now put that in a G with a 5-speed MB strengthened automatic...

[@no-damn-alias]

The highest spec 5 speed can take more than 1000nm und 600horses, so no need to strengthen. If you take the first gen 7G, that can take up to 730nm so also good and it'll run properly with few inputs. Give it the rear end of the E500 or E420CDi and you'll have low rpm at cruising speed and good connection from each gear and not a too short ratio from a standstill, to make it feel nervous

[@deborahchesser7375]

@@no-damn-alias perfect!

[@maniekmechanik]

Nice job Well done

[@user-ny9zk3wy2g]

but you already give the grandfather) my fellow man loves your opinion)

[@brolle87]

finjusterar ni tomgången med ett elektriskt vred, kopplat på stiften bak på pumpen?

[@turbo-garageodessa]

Cool work

[@racerforever9084]

Hi. I plan to change elemets on OM 602.912 from 5.5mm to 6mm, it will help with perfomance or it will be almost same ?

[@tazotaz7835]

Hi. Do you conwert pump 2,5 om 602 engine without turbo for turbo diesel?. ( do you will use ALDA?) do you know whether it will be work?

[@ionghidon1186]

I have a question . Two screws holding the injection pump or broken at that moment started to smoke and go off. I gave the pump down and I gave the maximum left wheel goes ok it does not smoke anymore but it does not have the wind and it sounds very tangy how can i set up and I pump to go as before

[@benjaminakesson2842]

What gearbox can cope with this power, upgraded stock? // Vilken växellåda pallar denna kraften? Finns någon manuell låda ni vet passar/går att modda på?

[@maozedong2186]

MB 722.6, comes in many mercedes

[@Parents_of_Twins]

I want to build one of these for an F-150.

[@user-qm4md3hy7z]

I want to buy such a kit-tell me the price of the kit and the possibility of delivery

[@JohnSmith-qj4cf]

Love it !! Where do I buy parts to do this please im in America

[@TheLantzMann]

You can go check out dieselpumpuk channel. He makes all the performance part you need for the Mercedes om606 and can get way more power than this using a mechanical injection pump. He does with stock internal parts cause these engines are beefy from the factory. Go check his channel out. I'm putting one in my 98 jeep wrangler and my 00 Wrangler

[@Canhead56]

@@TheLantzMann dieselmeken makes parts aswell you know, and a bit cheaper too.

[@polarborealis688]

After what i saw in your videos i have more and more respect for diesel engines and people who loves them. Need assistant?)

[@nicolasp7395]

Is stock internals??? Only fuel pump and turbo change?

[@jdantigua1999]

How do I Install an OM606 in my W211 chassis? I dream of it.

[@mrjodoe]

hey dieselmeken, thanks for showing us the dyno test. Which setup u used? 7,5mm + HX35 or HX40?

[@dieselmeken]

7,5mm pump 140 cc Borg Warner S200 turbo AR 0,62

[@ddesilva61]

I would be interested to know what rpm turbo realistically spools up at!

[@JoeB16v]

That's quite a large intercooler... what is the displacement, do you know?

[@eclipsegst9419]

Joe B 3L

[@basstard13]

Joe B looks A LOT like an Audi S3 mk2 [8P] intercooler.

[@Borgschulze]

What is the headgasket and head bolt in this engine? Stock?

[@hamidouelhadji7747]

Do you sold this tuned OM 606

[@roberthernandez555]

i have a 99 210 wagon with gas engine and want to covert it to diesel with the om606 turbo diesel and mechanical pump. what would i need ?

[@davidpritchard6685]

What turbo is that

[@phillau3015]

Do you do OM617 from 1979 300SD? How much to build something similar?

[@phillau3015]

Please email [e-mail].

[@tayyebshabir177]

I have just bought a w124 e300d. What can I do to it and what would the cost be please? Thanks.

[@nicolasp7395]

Year of the car? Im interested too

[@tayyebshabir177]

@@nicolasp7395 mine is 1992 before the update.

[@oljefri]

He charges 9000 Swedish crowns to modify the pump with injectors and adjust it, shipping excluded, and you send your pump to him, then the rest of the engine is up to you

[@jenickjohnson4361]

it is impossible to make power without smoke, this is an old engine, smoke emission at that time was different than now. So it doesn't need any smoke controlling system at that time. However, it is a true legend.

[@axispowerdiesel]

What was max fuel CC?

[@dieselmeken]

140cc

[@EvenStarLoveAnanda]

What about a sustained load of 400 Hp? Could this engine be used to drive a Motor-home with about 300 Hp sustained load???

[@JoeHeine]

EvenStar LoveAnanda more importantly, can it run on veggie?! 😎💭

[@EvenStarLoveAnanda]

I know it can. I have been running 2x 606s on veggie for years. Perfect veggie machine. No conversion necessary.

[@dieselmeken]

Turbo kit and manifold by DPUK.

[@MiG21aholic]

Must be enormous to need 300hp constantly

[@JoeHeine]

I know you have. I met you. I wanted to buy the 97' Diesel E300. I have a 91' E300 2.5 Turbo now.

[@adriananasik5300]

which feedpump is installed? OEM? Need I a bigger feedpump for the 7,5mm Pump?

[@jimmykovacevic7745]

Adrian Anasik i also need that any answer will be good

[@eclipsegst9419]

No lift pump just a pickup tube

[@mrjodoe]

dieselmeken used 7,5mm pump

[@guido0582]

Is this a Mercedes engine??

[@oljefri]

Yes

[@enkarac]

Stock internals?

[@nicolasp7395]

I want to know the same

[@jasonbirch1182]

It says "Verdi H Profile rods Arp boltet main bearing" In english I assume Verdi H beam rods and arp main studs.

[@jimmykovacevic7745]

hi dieselmekken how much cost 7.5mm pump for om606 i live in norway

[@eclipsegst9419]

Jimmy Kovacevic he has pricing on his website

[@dieselmeken]

e-mail me

[@MrAndrius12]

@@eclipsegst9419 where? I can't find it.

[@eclipsegst9419]

@@MrAndrius12 you seem to be right, the site is set up different now. I do believe you can find his posts with pricing on SuperTurboDiesel or PeachParts forums though.

[@MrAndrius12]

@@eclipsegst9419 interesting. I'll have a look

[@roberthernandez555]

what intake manifold are you using?

[@cyruswoolard3737]

That's stock

[@luisdecarvalhojoaomanuel890]

Preciso encontrar uma representante vosa em ANGOLA ,a onde estão lucalizado.

[@DaniloMarkovic-jz5pk]

So u made 400+ hp without smoke or you just hiding smoking scene..... I am aiming for 350-380hp as less smoke as possible from om605 (i would like to be completly smokeless 🤔)

[@amerbeganovic2259]

Bad remap

[@Diesel8290]

@@amerbeganovic2259 bad remap with the mechanical pump okk 🤓😂

[@amerbeganovic2259]

@@Diesel8290 go on yt and search om606 400hp half cars havent smoke like this

[@Diesel8290]

@@amerbeganovic2259 a mechanical pump can’t be ‘remapped’ you turn screws to adjust fuelling, and about the smoke due to the massive turbo and antiquated fuel system it’s very hard to get smokeless om606’s unless you have tiny turbo

[@el_chatarrero2622]

Diesel 2jz

[@Vito1998]

It must be 606 td only td have oil cooling of the pistons.if you have done everyfing....pump7.5/turbo hx35/cooler1_1m.everyfing.(try hange fuel pump to603manual,and big turbo hx and cooler big.has a large stock