Making Stannous Chloride Solution To Test For Gold Easily & Inexpensively

In this video I show my current method for making stannous chloride solution using lead-free solder and muriatic acid. It's quick, easy, inexpensive and works great. Please visit mdpub.com/UrbanGoldMining/inde... for more information. My PayPal Tip Jar: paypal.me/MyTipJar64
Materials used in these videos:
Dual Powered Digital Pocket Scale 200g x 0.01g amzn.to/3GJC8vR
Lead Free Solder Wire(Sn99.3Cu0.7) For Plumbing amzn.to/40iJezd
3pcs Glass Graduated Beaker Set 500ml, 1000ml, 2000ml amzn.to/3faaHO312PK Watch
Lab Reagent Bottle 125ml Narrow Mouth Ground Glass amzn.to/3Zoh8RG
6" (15cm) - Cover Lids for Beakers & Flasks amzn.to/3j5MHMSAroma Housewares AHP-303 Single Burner Hot Plate, Black amzn.to/378jL1p300PCS 3ML Plastic Transfer Pipettes amzn.to/3f9JQ4BAMMEX Clear Vinyl Medical Gloves amzn.to/2WBzB2A

[@jeffholmes1362]

That’s how I do it too. Good job. Thanks for sharing

[@danlindey7368]

Two thumbs up! 👍👍

[@davidtweeddale2027]

Thank you for sharing.

[@aussiescraphunter7808]

excellent, thanks mate

[@timdunk7278]

Thank you.

[@shucksful]

Thanks!

[@rockman531]

Thanks Mike! Home Depot - here I come! Have a great day! Jim

[@Frenki-gy9zd]

Pure tin is the best and for the small amount you need to last you a lifetime won't break the the bank.

[@kaningraja2145]

Love you❤❤❤

[@NOFX0890]

Excellent vid. Iv gotta say, though iv never criticised you for it, i hate the spoon method! Haha But you did just sell it to me. I appreciate the logic and will see what works best for me... probably a spoon. Heh.

[@johnross8939]

Mike, if you filtered the stannous chloride solution to remove the impurities, would it have a longer shelf life? And you'd eliminate / reduce the chance of those impurities eventually going into solution, diluting the stannous chloride.

[@williamjohnson2105]

What do you do with the liquid in the spoon after testing? Do you put it in your stock pot?

[@CICADA2059]

12 years till now 2023 I used to prepare Stanus chloride every 20 days make sure to keep it in a dark glass bottle ✌️😎 ah! Don't forget adding Sea salt it'll fast the operation.

[@tamassandor478]

Hello! Your videos are very good! I would like to ask, does stannous chloride only detect precious metals? Thank you!

[@bocamint4937]

Woo Hoo! First!

[@jessevos5109]

Can pewter be used to make SC?

[@mr.g-sez]

what about the flux? does it cause problems?

[@shaneyork300]

Tin solder, hcl & that's it?

[@rookierollhunter8652]

That's awesome, quick and easy. Do you save all of the test solutions and reprocess for the gold...ie...stock pot?

[@omegageek64]

Yes, I save the tests, but usually not in the stock pot. I try to keep it free of tin. I dump the tests in with my filters and rags.

[@chafikmondial]

Is thin wire better or coarse wire?

[@terranceborer7614]

Yea what he said.

[@user-tl7tz9lb9w]

I also use the same method to make stannous chloride solution, but the difference is I use waste solder which costs me nothing, then I keep the solution in the refrigerator, so the function will last almost forever.

[@victorsoto2141]

3rd comment 😊😊

[@dustinscroggins3382]

So just hydrochloric and lead free solder??

[@quinton3997]

I thought you said you was going to hurry up 😂

[@terranceborer7614]

And i know it dont have a shelf life! Good for a month or two? So dont make alot. It doesn't take much unless you have a load of gold to test .

[@terranceborer7614]

Come to testing rare earth metals theres no short cutting when its test time. 5 yrs. And still learning.

[@jerrydavis7130]

Hi Mike. Why it is important to use silver free tin? I though that silver will not dissolve in HCl.

[@omegageek64]

Waste of money and yet more sediment. If the silver percentage is high enough, the solder may not dissolve at all

[@jerrydavis7130]

@@omegageek64 I use bga chips for making SnCl2 as you demonstrated ones. Bga suppose to contain about 10% of silver, so you strip Sn contamination from bga chips, sediment is mostly silver and SnCl2, after filtration is ready for testing of gold in solution. I like killing few flies with one swipe. Warning about solder containing silver is at the best confusing, but hey, I like your videos. Thumb up every time.

[@3vilJOHN]

I have a question with the easy of making stannous test from fresh tin. What's your status on lab grade stannous crystal? Does that 5 dollar chemical supply crystal make Stannous Test the same as dissolving tin? Does it have a short shelf life living life as a "crystal stannouss" dry? And what's the recipe for a good test solution? Can it mix quicker than tin powder? All I could find online for mixing crystal staneous is add small amount of Stannous crystal to hcl. There is no info on the crystal Stannous and its behavior, being an undocumented science supply chemical. The test worked the day of for me. But I didn't know of expo on solution. After three weeks, back in the lab I never got a positive with my pure crystal made stannous solution, assuming know it was expired. Do you think my solution could have expired sooner, not using pure tin?

[@omegageek64]

I'm no expert in this area. I've only ever made it from pure tin or solder.

[@NOFX0890]

Im no expert either. I have read: Potentially you are testing dirty, contaminated solutions, so a high purity tin is not of utmost importance. Some solutions will be highly contaminated depending on your material. Im planning to use lead free pewter and have read this is satisfactory. I Also save relatively clean tin (possibly gold/silver/ lead/soldermask + contamination) from BGA scrapping to test effectiveness. I Will take the residues undisolved by the HCl through a process to test for precious metals. If you have another use for high purity tin, i would save it for that. Great vid, great question. Appreciate the vid.

[@NOFX0890]

Long winded, sorry. If its cheap and readily accessible the SnCl² crystals are a great option, I also came across a post that mentioned supplementing your solution with a small amount of undissolved Sn as a preservative. It might give you a slightly extended usage. If you test this, let us know!

[@matthewnicholson2699]

Why no silver?

[@wadebert4458]

How can you call this a "Stanous Chloride" test solution, without adding any "Stanous Chloride? Just curious.

[@omegageek64]

Um, tin plus HCl = stannous chloride.

[@wadebert4458]

@@omegageek64 Um, TIN dissolved in HCL is not "Stanous Chloride". Granted it is the first step in creating Stanous Chloride. Your missing a few important steps, like evaporating the aqueous solution, until crystals of the dehydrated form, "Tin Salt" or Stanous Chloride. After this process, you rehydrate the concentrated, Stanous Chloride, with HCL and three nines fine Tin, to achieve a cohesive PGM testing solution. Three eggs, butter and cheese, don't make an omelet. You have to add heat, salt pepper, or you end up with a nasty mess, that, well. I guess you could eat; but, it wouldn't be an omelet. Usually, shortcuts, just end up getting you lost, or worse. If folks are wanting to test for Gold and PGMs, in solution, wouldn't you believe that it would be worth the extra effort to practice true chemistry, rather than risk a nonviable solution, that could cause someone to discard a solution that tested negative. Not because it lacked Gold or PGMs; but, rather, the testing solution they used wasn't what it should be. There's a reason why, "Chemistry", is called "Science". There are no shortcuts.

[@quinton3997]

8 minutes before he gets to the point 😂

[@wadebert4458]

"SREETIPS", KZbin, has a tutorial for making perfect "Stanous Chloride" testing solution. I'd recommend watching it. Wade