Salivar Hero Roller Speargun Rigging How-To

Рет қаралды 126,264

3 жыл бұрын

Let Maverick America LLc's Mark Laboccetta walk you through the Salvimar Hero Roller and Salvimar Metal Roller setup. Mark takes the Salvimar Hero Roller and breaks it down to the tools needed to set it up, the correct monofilament line and crimpers and the extra accessories required to make this gun much more strait forward and easy to use.

Пікірлер: 25

@lynton123 10 ай бұрын

Great video thank you Mark, however you made an error at 4:00 as you didn't run around and over the spear to lock it down against the track. Of course if you don't run the shooting line this way on an open muzzle gun it won't be accurate and moreover the spear will simply fall out of position if it's inverted. Otherwise very helpful video! I did find that I could use the gun without the load assist or the bunny rabbit ear by picking up the wishbone with the other end of the loop on the further forward retainer (ahead of the reel mount), load to rear shark fin, then turn back over and position back closer to the handle. Less drag than the bunny ears :) However I do have the 95 so the longer versions of this gun may not be as easy to load in this manner. Overall, a great design by Salvimar and loving this gun! Thanks again

@jayrenguul6907 10 ай бұрын

Shooting line needs to be double for rollers

@fatheadpr 4 күн бұрын

Ill look when i get back

@user-hs3fu2vk9j 2 ай бұрын

Thank you sir

@aapfootball Жыл бұрын

great tools

@ruberkibeltranreve1255 2 ай бұрын

hermano eso es un fusil de alta potencia y nesesitas 2 vuelta de Retenida tiene una sola vuelta de Retenida y no es justo ponle más 👍

@cumpadidapesca6741 10 ай бұрын

Um Sonho De Arpão ❤️ Um dia Chego Nesse Top🙌🏻🙏🏻

@madsharkjames4108 Жыл бұрын

ship to the Caribbean?

@Papalolobibo Жыл бұрын

Can you convert your normal hero to a roller set-up?

@snipz1336 10 ай бұрын

Yes you just need the muzzle

@alexngai Жыл бұрын

how can you rig the shooting line such that the shaft doesn't slip out if you tilt the speargun?

@alexundo2114 Жыл бұрын

he did wrong line must over shaft

@MAVERICKAMERICANSPEARFISHINGCO Жыл бұрын

I think we’re show it on the video, simply wrap it around the horns.

@pstankov24 Жыл бұрын

Mark , you are full of crap .... line should hold the shaft down ..... you should wrap the line on top of the shaft . Guys mentioned you are wrong and instead of taking down this wrong video , you answer that you showed this in the video . Ha ha ha . I am calling this a bullshit . I wonder how are you still in business .

@lynton123 10 ай бұрын

@@alexundo2114 correct; if you have a bungee you may still have enough length to load it properly if you followed the video exactly.

@patrickgraczynski6096 Жыл бұрын

I appreciate the vid. But you didnt wrap the cable over spear tip and double wrap back to trigger release. I'm glad I can still wrap over tip but will have to replace cable if i want the extra 2m distance. What is advantage with the two rig options? I have the 115. You should mention this option first before someone else cuts there cable.

@patrickgraczynski6096 Жыл бұрын

I still haven't crimped near the muzzle since i. Confused if i should wrap cable over shaft tip or like you have it? Salvimar has POOR instructions

@MAVERICKAMERICANSPEARFISHINGCO Жыл бұрын

@@patrickgraczynski6096 You can either do it by running the shooting line from the shaft under the front "horn" in the muzzle and back across the muzzle to go under - thereby holding your shaft DOWN - OR, you can do it how I did it and just leave it without wrapping it over the shaft. The reason is when the bands are tight the shaft will NOT MOVE either way.