OMP Phoenix Jig Review With MFJJ!!!!

Detailed breakdown and usage of the new OMP Phoenix Jig with MFJJ!!!!
www.podiumarch...

[@tellyourfriendsaboutme4219]

When do we get a look at the podium fletching jig you've had in the works?

[@TimConnor13]

I got some 4 fletches flying like ABSOLUTE DARTS 🤓

[@Orr_s]

Mini super sabers?

[@tylerwatkins6319]

You should come to Oklahoma this year and come shoot at SHOT THE 3D EXPERIENCE. They're the biggest growing 3d event in the midwest

[@OnecentOutdoors]

Could you do a video on essentials to buy for a Home Archery Shop?

[@michaelmurrill5355]

I’m speaking for myself and a lot others man love the videos and love the skills and knowledge you put out for us.. KEEP EM COMING. And can you please put a video out on your main hunting set up and why you choice your set up????

[@adkfisherman8357]

Ordered one of these a month ago from Podium and it said expected end of September hopefully they come in stock soon I'm excited to give it a try. I'm using a super old Cabelas jig now and it's a pain.

[@brycekearns207]

Would really like to see someone manufactre a fletching jig somewhat like an AZ ez fletch but with the option of max helical, and 2.5 degree offset left and right

[@Qbynordi]

With metal or composite arms..the arms are flimsy on the current jig

[@brycekearns207]

@@Qbynordi I run the plastic AZ ez mini max right now and granted they are a little flimsy and not as precise, but they save so much time doing 3 vanes at once. Honestly I would take either but a metal one would be nice

[@brentbandy3566]

I cannot get my vanes even with the ez fletch max mini. No matter how slow I go when closing the arms, they come out WAY off. I love how fast it fletches and the helical but after I have to re-fletch an arrow a couple of times to get it even, I’m actually losing time. Any tips or tricks?

[@brycekearns207]

@@brentbandy3566 even as in the tips of the vanes are not even? If so I struggle with that as well, what vanes are you running?

[@thenameiwantedwastaken]

I just wish they'd make an EZ Fletch in a 4 fletch config. You can use the standard and do 4 fletch but it takes SO MUCH LONGER

[@chickimac1]

Love my Bitzenburger but this fletcher looks pretty promising

[@petersandoval1381]

I just use Gorilla glue, 10 sec set time, no problems what so ever. Going to look at this jig. Just returned a Bohing Multi Fletch, hated it!

[@bhuff86]

Today I learned you're supposed to keep pressure on the bitz when gluing. I've always just pressed down for a few seconds and then let it sit for a few minutes before moving on to the next fletching.

[@Aldocello1]

Man , Ive been using Arizona easy flex , left , and been looking at upping my fletching , close to buying a bitz but this looks more user friendly for a novice like myself ... now im not sure which to get lol

[@DavidBowCrazyBabyak86]

Yeah I've been wanting one of these since I seen it in the magazine last year. Thanks for the review. Are you coming out with a fletching jig too yourself?

[@akabobbybottleservice2173]

I've been using JB Weld super glue that comes with a brush cap kind of like nail polish. Phenomenal. Super easy, clean, and virtually no mess. I've used it with Bohning Blazers and TAC Drivers. With and without wraps.

[@Orr_s]

With Tac drivers too no wrap?? Those gave me a ton of trouble and i used their primer pen, no wrap and the best glue ive found previous to doing the TAC vanes. Bob smith industries glue. Even made sure my Bitz was bang on the money and clamp was flush sanded that down, cut the front part of clamp off. Every trick in the book. Took 3 hours to fletch up and get 6 arrows completed and TAC vanes adhering well

[@critter852004]

@@Orr_syup, hated those. They’re a pain in the ass. I’m a fan of the blazers or AAE max hunters.

[@Orr_s]

@@critter852004 always used AAE with no issues. The TAC drivers are such an awesome vane especially long range but for me as an NorthEastern Whitetail hunter idk if the aggravation is worth it. I love how light and stiff they are tho. But man those were a nightmare. And im no rookie to building arrows. Super OCD and i did everything in my power to make the TACs a smooth process. Followed all their tips and videos and still on my Bitz jig with an AAE receiver it was a biatchhh

[@Orr_s]

@@critter852004did everything in my power to make them adhere well with my Bitz and AAE receiver. And they were still a nightmare. I really like the stiffness and the light weight too but idk if its worth the trouble for me being a Northeastern whitetail hunter. No newbie to building and fletching arrows either. Everything ive built previous was AAE vanes and they were so easy in comparison

[@michaelhoffman1360]

​@dangler15 I've fletched probably well over 100 arrows using TAC vanes and a bitz, with and without wraps. I've never once had an issue. Are you soaking the vane with primer or pre priming well before trying to fletch? Either will cause issues with adhesion. Assuming you are getting good vane contact, I can't think of many other things that would be giving you so much trouble.

[@jordankoester4253]

Love your content, learn something from every video of yours I watch, any chance you'll ever review the Dialed Archery Arxos?

[@D18Y]

Super sabres recommend 2.5 degrees. Since there is no half-degree setting, would you go for 2 or 3 degrees?

[@brandonmiler801]

Thanks for always keeping us up to date with the new products coming out!

[@nstuart10]

I swear i learn something in every video, had no clue super glue was pressure activated...keep the videos coming!

[@YoureSoVane]

It's not. It just cures at a specific rate. It bonds to moisture on the surface, and usually humidity in the air is enough. That's why if you leave the cap off they'll cure sitting on the shelf. And in general they have a short shelf life because they can cure in the bottle.

[@kchak88]

Is it capable of doing a 3 degree helical/offset?

[@brandonlee8922]

Does it work for GoldTip GTO nocks?

[@sdcb27]

Did they only make 25 of them in 2 years? no one has them

[@CoachGoodwin23]

Thanks MFJJ, great review. I've been waiting for this jig.

[@ArrowItArchery]

I like the OMP products. Their only product that I haven't liked is their string level. Bought one, and it didn't jive with my Hamskea. Bought a second one, and it didn't jive either. I commented to a guy on a bow forum about his failure to tune his bow. He mentioned he was using the OMP level, and I advised him that my two were out of whack. He confirmed that his was too when he compared it with a friend's level. His nightmare ended. Not to rob this review of the jig, but just an FYI on the string level for anyone owning or looking to buy one. I mean, individual OMP levels may or may not be square.

[@jons7e]

MFJJ... where is the fletching jig you're making!!!!!! It sounds better than anything else

[@jarrahtheadventurer]

What's that glue you're using? Or what's the BEST.??? I'm Australia's worst fletcher..

[@tsi-rocket4144]

So what vane's can be done with a 5* helical with this jig?, I'm playing with bohning heat, tac driver 2.25, and super sabre mini's. It sounds like the 2.75" heat vane is too long to run much past 2 or 3* from what Josh said in this video but could the super sabre mini or 2.25" tac vanes work @5*? I waited until last June for this jig and ended up buying a bitz with both helical clamps. I then waited until 3 weeks ago and ended up buying an Arizone ez flech true helical all waiting for this jig to come out... But if I cant run 5* helical on the vanes I've settled on I don't regret my purchases.

[@charlesvinch595]

Still can buy one.

[@davidascott3780]

Hi MFJJ. Love your channel. Have you seen the AOT (Advanced Outdoor Technology) thumb release holder? Love to see your review review

[@redneckrobinhoods]

I’m curious because I wanna know before I buy. I currently use the VMP I run silent knights at 5 degrees with that, would this jig be able to get close to recreating that type of fletch ? Just curious for the manipulation stand point. Day6 arrows

[@jfquest6828]

I am guessing like the Bitz, you have to choose: Left/Right/Straight. What are the cost of the different clamps compared to Bitz?

[@MrChiumiento]

The problem with this is it’s still not level. Why does everyone make their fletchers at an angle? The glue will not stay even like it supposed to. I don’t under stand. I wonder if it is exactly to the degree like it’s supposed to be. I know for a fact that no bitz is exactly even like it’s supposed to be.

[@tylerwatkins6319]

Josh you should come to Oklahoma this year and come shoot at SHOT THE 3D EXPERIENCE!!

[@morgansnow919]

You should do a retro bowtec review. Bowtec insanity cpx vs bowtec core ss. Thought it would be interesting to see how far they have come since 2012. Enjoy learning from your videos. Thanks

[@mmtaxidermy08]

Have you ever reviewed blood sport arrows? Curious to hear your thoughts on the evidence arrow from their compound line. Side questions do you recommend fletching your own arrows?

[@Nick__C]

Josh could you review the b3 exact comp hunter sight??

[@Drock97266]

Thanks Josh, appreciate your concise/honest review on this jig! I just need to come to your shop and buy one. A trip to your place is on my list, Portland, OR has 1 good shop, would love to see yours!

[@dembowskidarrin]

love mine

[@NobodySirius]

Really happy to see you unpack this thing and give some impressions. Got mine last Saturday and I'm anxious to put it through the works. Indecently, have you seen that Striver quick release bino harness? Happy with my FHF, but that thing caught my eye.

[@harold3785]

"Promo sm"

[@jacobgullett7343]

Shout out the the real MVP's of this video, the trolls down in the shop who set this up as a 4 fletch. 😂😂😂

[@jgsnipe1]

Can you do a comparison of the other fletching jigs you have on the store? What the upsides and benefits vs downsides of them are?

[@navajopride13]

What's your thoughts on that mold z glue for fletching vanes?

[@stephengatley8144]

HAHA... MFJJ 4 fletch 🤣 You deserve this!

[@jeffspencer7489]

I like the lines indicating adjustment. The basic process is the same as Bitz.

[@fluffygreenman3500]

Yeah I have been on the supposed email list from OMP for at least a year.

[@dennisholm3565]

Can you do a comparison of thumb button releases?

[@kip.k]

looks better than the goat tuff jig I struggle with...lol

[@haroldtaylor143]

Absolutely an awesome jig. Got it today and already set up my 3d arrows

[@justinstarr9828]

Where are the other 9, 10 bows of Christmas vids?

[@justinmahan7860]

Right after i bought the bitz. Of course lol

[@nicholascrabtree614]

Looks cool. Easy enough for this newbie

[@Hubble-M]

Price tag aside how does it stack to a last chance vein master

[@perryknetter8577]

I got one haven't been home to use Thank you Josh God's Blessings

[@raymondjohnson6496]

Talk about ARROW THE BEST OF THE BEST

[@jacobbecker5122]

Please review spike press and legacy press

[@robertbean129]

Just ordered one from you. It was showing in stock so my fingers are crossed it is.

[@brockpeck7073]

Jig are sold out by the time your video dropped lol

[@EDHBowman]

I like to use the tip and move it around a little bit!😂

[@clintbraswell5293]

I’d really like to see a video on your draw board

[@Favorites2499]

When is your jig coming out?

[@FURFEELINGS_3]

Can you get close to the helical like an az eZ fletch

[@MrChiumiento]

Super particular huh. If you’re super particular you wouldn’t use a bitz either.

[@MrChiumiento]

Let me just say I love MFJJ by the way.

[@samventura5455]

If you had to pick this or the Last Chance if price doesn't matter which one would you go with?

[@CarlBertuzzi]

I’ve been trying to decide between the two myself. The one thing I don’t like about the LCA other than the price is that it doesn’t have markings as to where exactly to place the vanes between the two wires, at least that’s what was said on a KZbin video I watched but it didn’t explain how to get the vanes to perfectly line up.

[@osagemannn]

Looks like a good jig

[@calvinfisher-]

Great information!!

[@jasonard7227]

to bad its never in stock anywhere lol

[@phantomcruizer]

Try Lancaster 😎

[@mikewhitehead677]

Is there a left or right helical clamp or just the straight clamp?

[@douglasvaughn9530]

The clamp in the video was RH (right helical). They offer a straight and LH clamp as well.

[@mikewhitehead677]

@@douglasvaughn9530 thank you

[@PaulieB_TDO]

Do they make other clamps for that jig or is just the straight one that it comes with?

[@phillipwhittaker2389]

They do left and right helical just ordered left helical this morning..

[@PaulieB_TDO]

@@phillipwhittaker2389 thanks pal

[@d123avek1]

Ok I’ve got to be “that guy” 😂 Super glue (cyanoacrylate formulas) moisture activated, not pressure. Use of acetone-based accelerators speeds up the chemical destabilization and bond reaction.

[@douglasvaughn9530]

True, but you want pressure to get all the air pockets out and to spread the glue out evenly. You will get much better results with some pressure.

[@Orr_s]

I was told by the guy who owns TAC vanes that its actually activated and cured by the absence of air…which is particularly crucial for getting their pain in the ass to work with (yet awesome) Vanes to bond correctly

[@JJ79_]

@svaughn9530 Pressure also makes the glue layer thinner so it dries faster. Thinner layer of cyanoacrylate is allways keeping better than thick layer.

[@nicfield6895]

It feels like it's been a year since I ordered that thing.