Omron PLC Lesson 1- Introduction to PLC

Omron PLC Lesson 1- Introduction to PLC
✅ Use the coupon code🔥KZbin 🔥to get 20% discount on the course Learn Omron PLC Programming available at codeandcompile...
For daily/weekly updates follow us:
📸 Instagram: / codencompile
👩‍💻 Online School: www.codeandcom...
📑 Wiki: wiki.codeandco...
🌍 LinkedIn: / code-and-compile
Cheers,
Rajvir Singh

[@argreen69]

I have passed this onto my students. Thank you for making a great course.

[@thegeterrdone]

***** Thanks Mr Alex, you can pass our free course to your students as well online.nfiautomation.org ! There you go :)

[@reymartmanla9493]

name of the software for electrical drawing please

[@adnerobrownick1990]

Dude, you started the way I wanted. I'm Brazilian and understood perfectly.

[@kaluvanhariharan4256]

Your youtube videos are very useful to me and interesting

[@thegeterrdone]

Thank you so much 🙂

[@JulesBartow]

I love your accent. Reminds me of my time in Tel Aviv and Jerusalem. Shalom brother.

[@thegeterrdone]

Thanks :)

[@kunzuo3952]

I'm just beginning to work on Omron PLC and this video is really brilliant. Thank you so much.

[@thegeterrdone]

Thanks for the appreciation Kun Zuo, glad you find it useful ! let me know if I can assist you with anything .

[@samithsachinthana2658]

Nice clarification & very useful. Salute for shared your knowledge with each others.

[@Yoshi-sp]

Thanks a lot Rajvir, this video was very clear and easy to understand. Greetings from Bolivia

[@thegeterrdone]

+YoshioVids Your welcome ! Greetings from Germany!

[@nurazwahana9417]

hi, just wanna ask can a CPM1A Omron PLC be connected to an AC motor and a DC solenoid valve at the same time?

[@KaesOner]

Thank you Rajvir Singh for this very informative video. You have explained it very well and made it easy to understand with the dialogue along with the video, pictures and diagram. I am just about to start learning the basics of plc at tafe(college) here in australia for my electrical apprenticeship and we use omron plc's at work so this will help me alot. I also look forward to taking your plc course on your site as i like the way you teach. Thanks

[@thegeterrdone]

Thank you Kaes - I appreciate your comment on our Omron videos :) For any technical query you can always write to us at [e-mail]

[@ninojeorgelita8233]

We glad that you shared the knowledge you have ! You made it easy for us to understand. Thank you so much ONLINE PROFESSOR RAJVIR SINGH ! :-D

[@moseskaranja9645]

very informative, your directions and voice is very clear. Super b

[@avidLii]

Rajvir Singh, well brought out. Simple and clear. Thanks a lot. Looking forward to more in-depth learning. Greetings from Kenya

[@thegeterrdone]

Thanks ;) check learn.codeandcompile.com

[@nurazwahana9417]

hi, just wanna ask Can a CPM1A Omron PLC be connected to an AC motor and a DC solenoid valve at the same time?

[@ninojeorgelita8233]

I've watched your videos about PLC and industrial control. it's so very helpful and i recommend all your videos to be watch and subscribe to my classmates. Thanks alot..

[@thegeterrdone]

Niño Jeorge Lita - Thank you so much! I am glad that my videos let you understand the concept, and must share with your friends- Nothing can be better than that !

[@derina.maleek9408]

Thank you. For your video. It is. Best video. I ever. Seen on plc that video help to understand plc wiren completely thank you sir

[@dave1859]

I rarely like any video, but this video was realy useful, thanks for your help.

[@thegeterrdone]

Thanks

[@reshadrei1788]

thank you very much, this explains a lot i bought 1 of this a couple weeks ago (CP1E 10DR-A)

[@thegeterrdone]

Your welcome Baby Nash! :))

[@aashishprajapati8680]

thanks a lot sir. your concept is very clear and easy to understand.

[@tranhuuhuy7920]

Thank you for your video! good video. I think you should turn off supply power for PLC before connnect wire. That will make PLC safety more! Thank you!

[@thegeterrdone]

+huuhuy huy It's alright as we are dealing with 24VDC. There is no harm because if you see technically sensors are also switching voltage ON/OFF while PLC is running. So it's alright! Anyways thanks for suggestion

[@tranhuuhuy7920]

+Rajvir Singh (NFI Automation) Thank you so much!

[@thegeterrdone]

+huuhuy huy Your welcome!

[@abdelmjidnadir7026]

Thank you for this lesson, the idea was clear. Greeting from Italy.

[@tilmar120]

Thank you Rajvir for great informative videos. Martin UK

[@thegeterrdone]

+Mart C Your welcome! Thanks for the appreciation. Check our complete courses at www.nfiautomation.org.

[@londonjuniormg]

Very Basic information. But well explained. Thanks a Lot 4 sharing your time and your knowledge.

[@ben_surya5642]

im looking for this explanation.... thx, very helpfull

[@malihehamirfakhry7914]

Perfect ! Like your video From Canada

[@uchecallistus2828]

great video... please do a video on how to install omron plc free software

[@ankush2376]

what if i am not getting run led on only power led is on what you is wroung with my plc

[@7783786]

Hi , Very useful documents for PLC engineers and students ,thanks My project is how to control (Frequency , voltage , temperature and protection) Micro hydro power generator using PLC. Thanks

[@thegeterrdone]

Good luck for your project:)

[@AmeerAimanAzmi]

Hello Sir, what is the software you use to show us the wiring diagram?

[@automationtrader]

Greetings from automationtrader.com team!

[@suvrodatta1424]

Thank you for the video. I bought a CP1E. I downloaded Cx_Programmer, andfinding that CP1E is missing in the dropdown menu. Any suggestions?

[@yasinsalih592]

Thank you for your great videos

[@thegeterrdone]

Thank you :) don’t forget to check out our new website for free courses. Only at www.codeandcompile.com

[@fayedmuhammad1913]

why is the PLC output always on, even though it hasn't been programmed. thanks and i need an answer

[@thegeterrdone]

To which PLC output you are referring? :)

[@genesissingson2524]

thanks a lot. it helps me understand plc wiring.

[@ariandroid]

Thanks for sharing your knowledge! Would be better if you hold the mic steadily

[@Kathambamhits]

thank you so much for your explanation about plc... otherwise, I would like to learn plc wiring with dpdt relay

[@thegeterrdone]

Thank you for your appreciation! Get free/paid courses on Automation at www.nfiautomation.org

[@sunilwijeratne1620]

Thank You very much for Introduction of Omron PLC. In the same time you use some electrical wiring software. That's also quite interest, if you can give more information. Thank you again. SUNIL WIJERATNE

[@thegeterrdone]

Thank you SUNIL WIJERATNE for your appreciation. Our motive is to make learning easy! Between you can join our free basic Industrial Automation course at online.nfiautomation.org

[@georgealbo]

Dear sir thanks for the videos , can you make a video on connecting shaft encoder to PLC and using shift register with shaft encoder to reject/sort application thanks

[@thegeterrdone]

Sorry, I cannot make this as it needs a working prototype which unfortunately I do not have :/

[@carnby24]

Nice and precise....good for beginners

[@thegeterrdone]

Thank you for appreciation! Get more details at www.nfiautomation.org

[@SukhbirSingh-tb7qb]

Sir how can we run servo motor with mpg

[@rasheedullah4636]

Very helpful ever i found Thank you so much

[@pedromacedo6202]

Thanks for your great work!

[@prasanthvijimol]

Thanks for the tutorial...

[@thegeterrdone]

You're welcome

[@RanveerSingh-bb4nm]

SIR MAKE VIDEOS OF 0-10V AND 4-20MA SCALING VFD LOAD CELL TEAPREATURE CONTROLLER RPM WITH HMI PROGRAMMING

[@tanvirhossain7356]

Hello sir, can u Please tell me what are the use of I/O adjusting , which is normally located under the programming cable section in omron plc, thanks in advance..

[@trevorroberts396]

Hi Rajvir thank you the lesson. could you assist me, i am using a omron cp1l-m30-dt-d plc for some reason my output channels are lacked and over riding my program the light goes on and off between the programs, my output devices are always active and not responding to my program. is there a seeting im missing in the plc? is the plc broken which will be strange as two of them are having the same problem. my program and wiring is all good.

[@thegeterrdone]

Perhaps this could be that there is another bit in the program which is latching your output. You need to check for that.

[@himurakenshin0027]

Hi good night, I have a question what what kind of comunication I have to do, I have a cpu CJ2M cpu13 , it has a USB port and one rs232, but I don't what kind of protocol use to communicate with the software lab view, I don't know how to make a host link connection and a toolbus connection, can you help me

[@redaalshenawy8292]

heloo my friend coud you help for omron sysmac cj1m cpu21 software ?

[@aaronesparza5670]

Where do to connect the Zero volt when connecting it back to the power supply

[@ananthakrishnan1247]

explained very well👍

[@ravich7006]

excellent explanation

Was the output not meant to be ac voltage ? Inputs DC voltage output AC voltage

[@xaverindessy9244]

may I know what the spesific function of using batteray? what if we don't use it?

[@thegeterrdone]

You will lose data in retentive variables

[@seasheil25]

excellent video master rajvir

[@thegeterrdone]

Thank you Rodel :)

[@achmadpurnomo5878]

thank you, greeting from Indonesia

[@michaelcostello6991]

Thanks very much. This was a great help

[@junetsui5522]

Thx for making this video.

[@Nomankhan-jv1nk]

is there any way to simulate our ladder logic program without having the plc???

[@mohammadmuna2183]

Good morning Sir Sir my plc power LED glow but run don't glow what's problem

[@thegeterrdone]

Means the PLC is not in a RUN mode

[@GateEasy]

hii i have omron plc of cj serie when i connect to pc and go online it shown that failed to connect plc can you say where is the problem

[@daokien1990]

thank! This video will help my work very much!

[@thegeterrdone]

Your welcome dao trung Kien - ;) You can get more of FREE/Paid training at www.nfiautomation.org

[@syahmihisham5828]

thank you very much. Its very useful ..

[@basheertahawi5817]

is it possible to give Neutral to the common of the outputs so that the PlC would give me N and wire the first terminal of the indicators to the outputs of PLC and give the other terminal of the indicators ( Live ) L? so that i give 220V to the indicators

[@MrMtalhasiddiqui]

Hi rajvir, could you please share tutorial for omron rtu modbus ..

[@sandipvispute7796]

Teach all type of timer and counter in deep

[@alexleocontreras2549]

thank you

[@jorgesaucedo2295]

very helpful as a beginner....

[@thegeterrdone]

+Jorge Saucedo you are welcome :)

[@noprizhaopbid4175]

How to connect with expansion?

[@tharindudinesh619]

THANK YOU

[@naveenkumark7033]

What is the software your using for electrical drawings

[@mirneljusic3198]

I was wondering about the same thing. Circuitmaker is a little complicated initially

[@djmanvis17]

Thx, it's very usefull and so clear !

[@thegeterrdone]

Your welcome!

[@buluswain9470]

which program do u use for omron plc

[@karamjeetsingh7660]

bhout wadiya video aa 22 ji

[@thegeterrdone]

Check out our amazing Christmas offer at www.nfiautomation.org

[@sushantsardana5232]

I have OMRON PLC installed in a machine. The PLC is password protected. The vendor has given me password. Can you guide, how to safely release the password without effecting the existing program and how to save it. Thanks in advance

[@josemoreno-eh1oq]

thanks you from colombia

[@ameurmesbahi8410]

hi, nice job , which type of programming cable do you use ? if it's a normal cable like for printer , is it possible to have his driver ????

[@jaijai1054]

Thank u of good explanation I had one doubt how to find how many input came means motor will run without seeing program able to find out

[@thegeterrdone]

+Jai jai Sorry, i do not understand your question! Can you brief me again ,?

[@pradeepcw]

Can you please confirm which PLC is comfortable with reasonable price.

[@tyopras6834]

thankyou sir.. very helpfull

[@ram2848]

Hi, I am having CP1E-NA-20DR.. In cx programmer which address i need to put to get the analog data from 90 ch and 91 ch.. thanks in advance

[@thegeterrdone]

I never tried working on this PLC., but I'm sure it must be mentioned in its manual. Please check., or send a copy at [e-mail]

[@ram2848]

Got it through plc forum . .. Thanks for reply

[@NileshSinghforever]

good one sir.........

[@orientalpariental9305]

is the lamp 220v ac or 24 vdc?

[@regidoryting8819]

thank you very much on this video

[@thegeterrdone]

Your welcome Regidor Yting . Check out our free basic Industrial automation course at online.nfiautomation.org

[@elbakkali5756]

s'il vous plaît je peux le lien de téléchargement de CX Programmer version 7.1 ou supérieur urgent

[@abdellahdkouk5389]

Hy our dear Teacher its my first time here watching your lesson its my first in this video I wana know more about OMRON PLC because in my work we use OMRON plc connected via Ethernet and i dont know how to do to connect to one of them how to configure cx one parametter to pass node and adresses did you presented a lesson with ? waiting for an answer . all my respect Sir

[@thegeterrdone]

Well we have lecture for Omron CP1E type PLC. You can check the curriculum for the course Learn 5 PLC's in a day at www.nfiautomation.org. Let me know if that helps

[@thegeterrdone]

+Abdellah Dkouk Hello ! thank you for your appreciation. Well i have not worked on Ethernet based Omron PLC but i can try helping you out. We can rather have a LIVE session to try out. Write me to [e-mail] to schedule the class.

[@aymnslah7096]

think you man for the good vedio

[@mirlateef7065]

Thank you sir

[@elbakkali5756]

Please, I would a link of download CX Programmer version 7.1 or higher urgent

[@emilfalck5470]

Thanks

[@ameurmesbahi8410]

hi, nice job , which type of programming cable do you use ?

[@NeerajKumar-wy4lw]

good morning rajver sir omron plc programer hu please tell me the logix of high speed counter

[@nurazwahana9417]

hi, wanna ask Can a CPM1A Omron PLC be connected to an AC motor and a DC solenoid valve at the same time?

[@thegeterrdone]

Yea

[@eideandreas]

Hi, Thanks for your great turorials! They are really helpful! I have a CP1L PLC wich i want to use with your good tootorials, to learn as I go. when I try tu upload a program it completes, but does not remove the old program on the PLC. How do I clear the memory on it?

[@thegeterrdone]

Hello maceide - Thanks for appreciation. Well, when you tranfer the program frpm PC to PLC it overwrites the old program with the new one. How come yous till having the old program in PLC? Can you please share the process with screenshots at [e-mail]

[@engabdoshawkey]

i have cj2m omron has protected and have password . please i need soft ware to unlock password

[@don5566112233]

good job, bro

[@titusketer3482]

excellent I need to register for trainning

[@thegeterrdone]

You are most welcome. Check out our amazing Christmas offer at www.nfiautomation.org

[@vivekshukla6139]

nice sir...

[@sudalaimani3641]

Sir what software are using for circuit diagram?

[@robertlaptopfactory8514]

Thnx a lot its very usefull

[@thegeterrdone]

Thanks for the feedback!

[@adaadaaja7397]

thanks lord

[@anandkulkarni4063]

thank you rajvir sir!! I getting hint how to start plc learning.i have a single question how to download it's software.thank you.

[@thegeterrdone]

Omron Cx one might be available in the internet for trial version! Kindly google it

[@abcrectify6916]

Sir please can u make a video on timer and counter of omron plc properly

[@thegeterrdone]

More videos are in the paid course available at www.nfiautomation.org

[@larancesteca4452]

Electric failure in chainlink machine

[@tranthilan5272]

can you unlock password plc omron/