ON3 FOXBODY TURBO INSTALL OVERVIEW: TIPS,TRICKS & HACKS (PT 1)

#ON3TURBOINSTALL #FOXBODYON3 #TURBOCLONE
In this video i will give you an overview of a on3 Performance turbo kit install on the Calypso Clone.
LINK TO SHIRTS teespring.com/stores/brew2l
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.to/BREW2L
Send mail to: P.O. BOX 900 Ashford, AL 36312
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.com/user/1271816...

[@GearHead704]

Somehow I literally thought you were going to say "We unboxed it hour and a half ago and it's installed." If you had I really wouldn't have been surprised 😂

[@BREW2LFOXBODY]

Lmao... I wish, but Andrew wouldn’t work until we ate some fried honey buns. 😂

[@GearHead704]

@@BREW2LFOXBODY Sounds exactly like the Andrew I know! 😂

[@jaylongton]

BREW2L, I just received my new April Hemmings Motor News and it has a Foxbody GT on the front cover. You know when you hit the cover page of Hemmings the Foxbody is really starting to make it big and gaining the respect of all car guys throughout the world.

[@Mww393]

28 min video=awesomeness. Love the progress, great work. I can confirm that installing an intercooler on a lx front end is way easier

[@jrusted5.031]

Its great, the progression o the on3 turbo has been quick. Best of all makes the engine bay show quality with all the shine. I really love this car!

[@smallfry0764]

After watching this video 2 years ago, I set a goal for myself to get a fox and turbo it. Got me one, and Friday I picked up a vs racing 7875. It’s too much for the car but I got a deal on it I couldn’t pass up. Thanks for the inspiration to get back into my dream car!

[@williamhayes5670]

Always waiting on the youth of today. I wait for my sons all the time. They show up when its dinner time or the job is done. 😂😂

[@BREW2LFOXBODY]

Loool ☝️ so true

[@iammalloy]

Measure twice, cut once! I am so stoked to see not only a power adder, but a turbo going on the Calypso!! Looks like you guys are making great progress as well. Cant wait to hear it fired up!

[@nestuinnavarro7313]

Any brand for that kit ?

[@ktga67ish]

I’ve said it before but I love the music in your videos! The stuff gets me hyped up about installing my new EPAS kit in my classic.

[@VidTubeWatch]

I look forward to you firing it up for the first time with the turbo on. I know you and Andrew will figure it out. Thanks for sharing.

[@Dion11197]

Looking good man!! Can’t wait for the initial startup!

[@JM-tj2kl]

Way to get after it. You could of made this a much longer series on the install, but you're banging it out! 👍

[@stevenminix]

I like how your protecting things from heat, I had to do that to my turbo system as well. Good thinking ahead...

[@jesseruiz8740]

Hell ya pshhh!!! And just noticed brother about 20k subs!! Badass was here since the first 500..

[@Tact-Mack0397]

This things going to be sick!! Loved this video man

[@dickiecornwell7262]

You said 3 weeks I knew better than that all of them parts laying around knew you had itchy fingers like I said before you have pride in your work best channel keep the video's jumping

[@bbq5.0]

You are really busting your butt and getting it done. Awesome job with the installation so far

[@JKWilson61]

Super nice clean install. You may say you had to hack this or hack that, but it doesn’t look hacked up. Great job! 👍👍👍

[@gregoryjowers3629]

Awesome build my friend that’s what I was going to do till I got my snow snake well good luck with it

[@stevenminix]

I removed my bumper and then later installed a fabbed up tubular bumper because of the fear of the front bottom of the bumper cover being caved in at high speed. You claim to be a novice, but your doing excellent work.

[@BREW2LFOXBODY]

Thanks steve, I’m definitely a novice.. just done a bit of research 👍

[@cre8tivegarage157]

Great video 🎰🥂 we definitely say do more installs 🔥🔥🔥

[@cashfiander2552]

Good work man! Can't wait to hear the sucker spool!!!

[@GoFastNation]

Awesome!! Looking forward to seeing it run

[@fifty_fox9866]

20:38 😂🤣😂🤣. Good stuff man. Looks like it’s coming along pretty nicely!

[@BREW2LFOXBODY]

I couldn’t help myself.. 😆

[@stephenroberts7816]

Yikes! Between you and all the others who have put these kits on makes me think twice about ever doing one. LOL!!! Seriously though, awesome stuff and I can't wait to see it perform.

[@brandoncochran3976]

Can't wait to see it running

[@mustanlab302]

BREW2L on the big screen tonight

[@mikiesmustangs4803]

I cant wait to see it hauling ass this is a awesome build 👍👍👍

[@cburford2730]

Just earned a subscriber! I watched all the same channels for installing this as well, I have a 92 notch in the process of installing. Pulled motor and trans to repaint block and upgrade to tremec

[@emeraldnotch7758]

Great stuff! I called it.😎 A week till running. 👍👍

[@hotrodgeorge2352]

Great job bro 🤘🏻

[@kaboom1077]

Man thanks this video is what I was looking for because I wasn’t sure if I could run the exhaust I wanted

[@yellowfoxbodyguy]

coming together nicely

[@erniethompson1776]

You said more music, in head the wolf started playing! 🤟

[@bobfalfa76]

Fried honey bun? That sounds amazing and terrifying

[@florimshala1]

This what you call a total dream Mustang ✌️✌️

[@Urlhere]

Looking good. I'm not a turbo guy but nice to see a power adder.

[@brssgarage90redmustang68]

I got to get me one of those tool karts like u got . 89 bucks is a hell of a deal man i love harber freight.

[@tydelldrummondsr.8694]

I was going to ask if you were gonna do a before and after dyno....lol later for that! No games being played! Nice!

[@roygustafson7729]

I Watch All Your Videos 🍀 Absolutely The Best Music in Your Time Lapses and in The Background 💪😎👍💯🙏🦊🐎🌅🌃

[@redman715]

I laid my arm on one of those bumpers when I was a kid and had fiberglass in my arm for a week pure torture

[@countryboy6767]

m.facebook.com/story.php?story_fbid=3142428862467955&id=100001026151518

[@jeffsheppard_actor]

love this build bro. amazing the work you get done in a short amount of time. need to sell my mustang so I can buy a fox.

[@chrispittman8477]

I am swapping a bone stock 5.0 and aod from my 91 Gt into my 91 lx 4 cylinder car. The body on the lx is completely rust free and in really good condition. The plan is to swap “everything” from the gt which has some rust issues and install the On3 turbo kit and leave the engine completely bone stock from oil pan to throttle body! Should be a fun little build but I’m sure time consuming! Thanks for the info!

[@beauthompson5425]

Fried honey bun!! I’m headed that way!

[@topmodstv3682]

One tip, if you are keeping your swaybar, change the bushings if needed BEFORE installing the passenger side header. You don't want to know the struggle that was with that header & turbo bolted up

[@joe5.097]

This makes me think about finally doing a turbo build. Look pretty easy

[@BREW2LFOXBODY]

The kit itself fits great! It’s the cutting that’s the aggravating part lol

[@joe5.043]

I thought I typed this haha.

[@Chad-Dion]

Been looking at this for a while now.. great to see you doing it. I wonder how this on a stockish FOX compares to a stock newer GT speed wise

[@fordhoarder]

Looking good man. Make sure you disconnect the vacuum line going to the oil fill or you will be pressuring your crankcase. A catch can is the best way around it.

[@nickbradey3973]

Man u make quick progress..I surprised u had to cut that much around the intercooler..I have the 4" intercooler and the same kit same car same bumper didnt have to cut a thing..looks great though!

[@chignik8002]

Cant wait to turbo my 5.0 93 tbird😍😍😍

[@hondatech5000]

Excellent work I like the approach mock, cut, fit, that’s just how it’s gonna go adding a turbo to a car and sometimes just adding a Front Mount to a car that had a turbo you will have to cut. Off topic: Do you want a Cobra intake for the clone? I have one and several other 5.0 parts I’m actually pretty close to your location too...

[@Madcap500]

Good luck 👍

[@richcarotenuto4849]

Here’s some tips that I was told/ did for mine. Crank over first with the coil unplugged to prime the turbo with oil for the first startup. You should tune with no boost controller at first. Keep it at the spring psi then get a good tune going and then install the controller and increase according to what you want to run. I bought a 90 intake tube off Amazon and a few t clamps and couplers , that silicone coupler felt cheep. The sn95 upper rad hose fit great and directs away from the turbo. Watch the steel oil line near the alternator wire bolt. Good luck my friend, certainly worth it.

[@BREW2LFOXBODY]

Great info! Thanks for taking the time to help a brother out 🤟

[@richcarotenuto4849]

BREW2L I just did it a month ago. Let me know if you have any questions. Anything to help .. except for money.. got none of that now 😂

[@bradvaughan3658]

Good information. It definitely looks intimidating but you seem to be figuring it out. I bet the wife is loving the mess getting drug into the house. Lol.

[@tobylynn75]

Very Cool.

[@joshoneal4104]

I have the 4 drawer Harbor freight black roll cart which I have had for about 6 years just last week my bottom drawer lost all of its ball bearings but its my fault I use it everyday and I kept overloading it but it still works

[@mr.someone6490]

All you need now is a 427 boss block :)

[@liqudice]

I actually had to trim my passenger side apron right by the shock tower to get that cold side pipe lined up.

[@BREW2LFOXBODY]

Andrew I’m thinking that’s all that’s holding mine off as well.. haven’t gotten to that yet.

[@wastedwagesmercuryman6018]

Sorry to keep popping up in your comments wth suggestions! A hole saw to the lower bumper support for a smidge more air flow over the cooler!

[@BREW2LFOXBODY]

That’s a good idea ☝️

[@BREW2LFOXBODY]

That’s a good idea ☝️

[@doctorhonda111]

I saved this video in case if I ever do this in the future . If I ever have enough money lol

[@turboman351w3]

brewl i love ya bro not trying to be a hard ass .

[@guillermoocho359]

Making me want to turbo mine. 😬

[@demboyz8461]

Hell ya!

[@dakotarussell5070]

Before you get to terribly far it might be a good idea to swap out the on3 header gaskets with some copper style gaskets. Saves a lot of time in the long run!

[@89lx98]

Nice work! You keeping the sway bar on? Thanks for the awesome videos! Learned alot

[@BREW2LFOXBODY]

It’s removed for now. 👌

[@boss302nard]

Awesome progress! Question: are you going to vent the valve cover on the drivers side? Or do you not find it necessary?

[@GnarDogTstix]

Getting it done man hell yeah! Question about the paint: Is that just the factory Calypso color? Or did you add a little something? The color just looks so damn good in your videos. Better than other peoples.

[@BREW2LFOXBODY]

Thanks brother! It’s the factory calypso green. I think it’s just the fact it’s resprayed. I’ve noticed that on a lot that have been re painted.

[@dotzpowerhouse]

Your a pro looks lovely

[@BREW2LFOXBODY]

Keeping it real brother 👌

[@jasonstansfield8288]

Hey man I love watching your videos for a while love them I just inherited my dad's 1990 GT convertible it's an aod car I bought a set of GT40 heads in intake off of a Ford exploder it's already got the BBK shorty headers cold air underdrive pulleys x pipe a 6A l ignition 70 mm throttle body when I purchased the heads and intake I also bought the rear end out of the exploder it's got 373 gears the transmission shifts out great it stock do you think I'll be okay running a b cam or better off with an E cam not really wanting to put a stall in it right now in order to spend money on this car got to keep it where my wife can drive it she's a Gearhead herself but want to keep it a daily driver with attitude

[@beauthompson5425]

Should be fun to drive! Boosted cobra clone equals tire smoke!

[@justinwilson1446]

Just a heads up on your throttle elbow. Mike was having problems with his cavitating under boost. May check out his video on getting his tuned after the install. I think that’s when he figured out what was happening. Just trying to give you a heads up.

[@liqudice]

Move the the alternator turn buckle one bolt towards the passenger side. The alternator will basically be laying next to the turbo. Mine actually touched

[@BREW2LFOXBODY]

I’ll try that! Thanks 👍

[@NoFox_Given]

Every car is different really. I’ve done a couple of these installs and never had that much bumper trimming. I’ve got an LX and outside of cutting the lower part that is it. I’ve also got the 4” upgrade

[@tork62077]

that looks like a night mare..... great video and info. I'm defiantly not doing a turbo lmao

[@hondatech5000]

Nothing ventured nothing gained...

[@kennyp4967]

Chicken

[@RangerOutlaw]

Sweeeeettt!!!!! 🐌

[@ktmerritt29]

You guys remind me of me and my friend we do the same stuff i have a 5.0 99 ranger

[@trevorsattainment8239]

Any idea what exact kit this is? A link would be nice. There’s multiple on3 lots I’m seeing and would love this setup! Thanks for the videos I love them!

[@wesboyd7416]

When I had my on3 kit I wasn’t happy with fitment and how many parts I had to upgrade so that I could get everything tight and right. It was an early kit tho

[@ALilly55261]

If you use an upper radiator hose from a 94/95 GT you get the hose off the turbo. I’ve had an on3 kit on my car for almost 10 years and love it

[@BREW2LFOXBODY]

I’m definitely picking one up today! Thanks

[@kgray59]

That rubber intake elbow is very soft and will collapse on itself when you stab the throttle and create a bog. Id continue to the throttle body with the aluminum pipe and then cut the ends off the boot for couplers. frozenboost.com has polished intercooler tubing in case you cant source something locally

[@adamcossy]

Love the build. Sick car also. That 90 coupler from the throttle body can’t be right. If the couple was shorter it may fix the issue with the next joint in the fender by moving the pipe rearward

[@BREW2LFOXBODY]

I might look into that actually.. you might be on to something 🤔

[@jesseruiz8740]

20,000..hell ya brother

[@BREW2LFOXBODY]

I didn’t even notice it until you posted this! 👀👌👍🔥 thank you for your support 💯

[@alertgasper]

I'm wondering if moving the battery to the rear of the car (getting better weight transfer and traction as part of the deal) and spinning the upper intake manifold 180 degrees like a Lincoln or 351 lightning setup, and then running piping from the intercooler in the space vacated by the battery would have helped with the plumbing? I had a 1986 turbo t'bird and know the extra length of plumbing from an SVO front mount intercooler really didn't help boost lag from the factory T3 hairdryer below 3,000 RPM. Also, on a low deck Windsor, if you ever have an oil filter clearance issue, Ford's 300cid Inline 6 used in the 1960's for vans and pickups has an oil filter housing that rotates the filter 90 degrees. they go for over $100 new, tho. you may want an external oil filter and cooler setup, since the turbo needs oil that won't coke up if you aren't using a turbo timer.

[@mustangsally]

Great you tube channel!!! My advice is to move the rubber hoses away from the turbo. It will burn so fast. We installed the same into my car. I will send pics if you would like to see.

[@BREW2LFOXBODY]

I would definitely like to see some pics. Can you send them through Instagram or Facebook? My Facebook is BRUTAL VLOGS

[@mustangsally]

@@BREW2LFOXBODY my husband and I are very private. He has a 93 red cobra with a huge block and turbo. I have a black lx with cobra side skirts. I have an One 3 Turbo with a 302 engine. Ask me anything my husband will know what to do.

[@BREW2LFOXBODY]

Sheri Smith now that’s an awesome combo! 🤤 You can also send pics to my email [e-mail]

[@mustangsally]

@@BREW2LFOXBODY I believe my husband posted a video about it. Highlander is his KZbin name, it's part 6 of the build. Hope it helps!!

[@joshuaanderson8869]

I just ordered my kit and watching these install videos to get tips and tricks. I noticed your car was mass air. However didn't see you do anything with the mass air when installing pipe. Curious do you delete the mass air. My kit says it has maf matching injectors. Thanks

[@stevenminix]

I had to use a fabbed up elbow with v bands welded on the TB, I ran an accufab 90mm so it didnt want to fit mine either. I love v bands and their design so I used quality plasma man clamps Im pretty sure or vibrant or something, but it worked much, much nicer! Quick question, what MAF did you go with 05+ slot style? A slot style is very nice and give great transfer in a 3 inch cold side.

[@BREW2LFOXBODY]

That’s a good idea 💡 I’m speed density on this car.

[@liqudice]

Take those exhaust gaskets off! They won’t last. Use no gasket, and use high temp copper RTV. That’s the only way I’ve been able to get my kit to seal

[@willbradley6450]

When you changed out your gears did you change out all the bearings crush sleeve and races

[@guillermoocho359]

Doesn't Steeda have an after market bumper?

[@Jkush463]

this makes me never want to look at a turbo kit, terrible fitment and all the piping under the hood just looks so crammed in, i dont like it. But good luck on it and hope you get it all sorted out and dont burn anything up, looks like alot of work to do after all the work you already did!

[@easycomeeasygo8901]

Different turbo kit. But my down pipe cant be removed or installed by it self. Header has to come off first.

[@anthonysantanas]

If you were going to do a super charger kit say from lmr which one would you pick if you were not doing turbo?

[@texasinnovativeperformance6439]

Wouldn't have to cut much if you were doing air to water setup. Still great video

[@liqudice]

Use a 94/95 GT upper rad hose. Clears the turbo beautifully

[@BREW2LFOXBODY]

Andrew Hoscheit great info thanks 👌

[@stangbrain5.080]

You can also run the Vortec supercharger upper radiator tube.

[@ericlawhorn5248]

Steeda mustang lightweight race front bumper bar part #555-5095. Check it out

[@marksauer7604]

So what about the front swaybar,where'd it go?

[@jasonv1144]

Hey man. I got a 92 gt. I'm looking on lmr for new heads and a b303 cam. I'm not sure what heads would be good. I'd get gt40 heads but can't find a good pair. I got a cobra intake. Any help? Just looking for a good boost in power. Thanks!

[@hyperbull9659]

what are the headers that you used for this? they wouldnt happen to be the ones ON3 sells would they?

[@boostedvert9361]

Did you use the supplied header gaskets?

[@frock512]

How in the hell did I miss this series ? Oh well better later then never

[@murphy6767]

Hey what kind of shop lights is that? Thanks