One BIG Problem With The Coronet Giveaway Car!

#fabrats #coronet
This Coronet Giveaway car is sure not making things easy around here, but if there's one thing I know.......it's that Fab Rats will figure it out!!
Make sure to follow along with us as we build and fabricate cool stuff!!
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
Check out this whole build process here:
IT’S ALIVE! Will The Coronet Giveaway Car Run?
• IT’S ALIVE! Will The C...
This NEW Project Is Bound To Get Everyone Excited!
• This NEW Project Is Bo...
You Won't Believe What's Under The Hood Of This Classic Coronet!
• You Won't Believe What...
We've Been Keeping A BIG Secret About This Coronet!
• We've Been Keeping A B...
We're Giving Away This Vintage Coronet Car!
• We're Giving Away This...
Well.....That Didn't Go As Planned! The Coronet Giveaway Car Puts Up A Fight!
• Well.....That Didn't G...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: [e-mail]
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

[@richardthomas1743]

HEY! Good morning. I hope that Michelle is healing from the accident. Thumbs UP to you all

[@kramnoslaw4474]

Bro this is not FabRats this is a friggin scammer I'm getting ready to make disappear. This text telegram stuff

[@johnme7049]

@Richard Thomas Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@gregormiller4037]

same here (did ya check your mail box Paul:).

[@queefersutherland8495]

Give her some shrimp and sushi she will be fine. That was a joke Michelle because of all the food/eating comments

[@michaelf8302]

It's the Ford blue paint on that Mopar trans making it leak...

[@ModernDayTemplar606]

FabRats giving us a chance to win this car is very well appreciated. But the amount of work blood sweat and headaches Paul,Randel and Ben has put into this project is hard to put that amount of appreciation into words. Thanks FabRats

[@Mountain_Paladin]

It's "comforting" to know that my shop isn't the only one doing multiple "do-overs" . I absolutely understand Paul's frustration with having to do things over . Paul however handles it way better than I do. Michelle your in our prayers we all love you here. Please squeeze all your kids when you can. God bless Paul , Michelle and all their little prodigies.

[@Gramps1975]

I think Paul is more patient that most of us watching...

[@donrahlf4656]

I am a 76 year old guy and retired, I watch a lot of these kinds of shows and I really enjoy yours, and all the people you have on it.

[@MarkJacksonGaming]

-- Ah the days you could drill holes through the firewall without being worried of hitting 5 grand worth of tech :) Thumbs up.

[@johnme7049]

@Mark Jackson Hey Mark, Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@MarkJacksonGaming]

@@johnme7049 -- Oh, well aware. But thanks for the notice. Not my first dance.

[@MarkJacksonGaming]

@@johnme7049 -- But if I do win. Tell Paul to give it to a wounded vet of his choice.

[@dennistaylor5052]

@@MarkJacksonGaming "Well Done"

[@stevegranger818]

Paul is the greatest dad! Level headed, keeps his cool, teaches his kids cool stuff... Best dad ever!

[@charlesshay9946]

Hope Michelle is doing okay. The Coronet is sounding great I love how nothing ever goes as planned that is how you know this channel is real. Keep up the great work and God bless your family.

[@robedmund9948]

Paul's laid-back attitude and ability to stay cool when things go wrong convince me that all is right in the world no matter what happens. Thanks for the inspiration!

[@invincibleproject]

Hey guys, I just wanted to drop a quick note to say Thank you! My Wednesday, Friday, Sunday mornings are better for having you virtually in them. You have a great family and group of friends. Truly living the American dream!! Thanks again

[@jayramsey4953]

Copper Coat works amazing on header gaskets. Clean the cylinder head and header really well. Put a heavy coat on each and put some on the header gasket. Then tighten the header bolts nice and snug. Wait 24 hours and it should seal nicely. It saved me a couple times.

[@rossdodge1458]

I hope Michelle is getting over the pains from her accident. My beloved 1965 Coronet 440 had a 4 speed. The 4 speed seemed to be bullet proof. If practical, swapping in a 4 speed might solve a lot of transmission problems. That car is going to be a fun ride for the winner!

[@cdanielh128]

You not swearing and chucking wrenches only to go pout and watch youtube to simmer down shows your a man with much more patients than I. Keep it up!

[@xvsj5833]

“It’s always something” I always say, Thank you for bringing us along on this project Paul 💛👍🇺🇸

[@jayramsey4953]

I hope Michelle has recovered from her accident. Thank you for all the awesome videos. It is nice to see you working with your brother. My brother was killed when I was 23. I missed out on all these memories you two are making. So it is refreshing to see you guys getting along so well.

[@davidpay6684]

Your ability to keep your cool amid getting poked with a screwdriver, cutting yourself when the wrench or driver slips or having to redo work that doesn't just take a minute or two is thoroughly impressive! One of the MANY reasons I love your youtube channel. THANKS for the entertainment, knowledge and example!

[@MrGixxer1300r]

This car is fighting you left and right I'm glad to see Paul keeping a smile on his face the entire time. I wished I was so patient. My hats off to you Paul.

[@billcypher357]

i wish Randal walked by with the "We do it right cause we do it twice" sign every time yo guys pulled that transmission

[@johnme7049]

@Bill Cypher Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@tobysanders5946]

I just want to thank you all for content . I lost my brother earlier this year and watching you all and the Lord Jesus helped me through a tough time. You all comment to family and faith is much appreciated keep it up you all

[@johnme7049]

@Toby Sanders Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@Tachyon62]

My wife is a vet tech and besides styptic powder (aka QuickStop), corn starch works as well. These are used for if (then) you trim dogs nails a tad too close and they'll bleed.

[@jasonjohnson2966]

Love watching you and Matt. I hope Michelle is doing good and heals fast.

[@robertstephenson2945]

Good to see you guys working together. Two great wrench guys should make for one awesome vehicle. Ben is definitely a great addition to the channel. Can't wait to see the beast smoking some tires!

[@johnme7049]

@Robert Stephenson Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@debbiericketts8406]

Paul always know how to fix things. I hope Michelle is doing ok. My heart sunk when I saw her car.

[@johnme7049]

@Debbie Ricketts Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@roncameron7461]

Dang guys! I know the frustration you're feeling! Hang in there, I'm sure you'll preserve and win!!!👍

[@bengalipeau1968]

This is scenario of what happened at my Dad's shop in the 60's. One of my Dad's friends told Dad "you should wear tampon gloves to stop the bleeding from all the cuts and nicks." Like Paul Dad always cut and nicks himself, hed come home with masking tape gloves. Love your show, it brings me way back.

[@the_truck_farmer]

Glad to see I’m not the only one who has to do repairs multiple times…SO frustrating! I feel your pain!

[@simondoran6979]

Thanks for the realness of the project! No project of mine is smooth and the "learn as you go" process is as fun as it is frustrating. best of luck with the build!

[@DonAshcraft]

Michelle! If you're still doing the editing you have become really really good. I like how you spend a little time showing what your kids do around the shop. Families are everything. 🙂 Also the map that you had pop up that shows the distance Paul has to go to get parts was really helpful and entertaining. I'm a long time Colorado guy and we visit Utah a lot. It's simply a great state just like Colorado. But I don't know how far Paul has to go for parts, so the map feature you added was pretty darn cool. Keep up the great work guys! Love your channel!

[@todd6385]

I hope that you are their when Ed gets his LJ20 back (& his mountain climbing bike), you guys did SOOO much work on it and I'm sure that he would LOVE to see everyone again !!!

[@DudeStone]

It sounds amazing, too bad that it's leaking but if anyone can figure it out you guys can and will great video as always!

[@johnme7049]

@Michaell Stone Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@Tinman97301]

🚨🚨THIS IS A SCAM🚨🚨👆

[@DudeStone]

@@johnme7049 seeing as I am an engineer I would hope I didn't fall for a basic scam but thank you for the warning that they gave in the last video or my own tech blocking it all

[@chrispennington8053]

I enjoy watching your projects. Your entire crew is entertaining.

[@Thunderchild83]

After an afternoon of working on and cussing out my truck ('88 Chevy S10). It's nice to come in a watch somebody else do the same, as I'm doing dishes and making dinner. Keep it up, misery loves company.

[@JRD77VET]

As a machinist for over 40 years who has installed tens of thousands of helicoils ( aluminum military parts require them ), when you install them, turn flush plus half a turn. The entire end "square" of the helicoil thread insert should be below the surface. Jeff

[@dbmail545]

Love heli-coils. When the alternative is to weld up and re-tap they are lifesavers.

[@tt600pch]

Heli-Coils are okay. E-Z Lok inserts are a solid insert. They are replaceable, come in several wall thicknesses and take standard tap sizes. We used them in the sawmill for thread replacements in aluminum saw guides that had bolts taken in and out with every saw change.

[@MrDan1509]

Heli-Coils are a thing of the past, Time Sert is the only way to go when needing an insert!

[@Clean97gti]

yeah, I sure wouldn't relish the idea of welding up an oily hole in a thin aluminum casting. Ugh.

[@karlschwaber7006]

I put a helicoil in my Bultaco and never had an issue with it. Handy gadgets.

[@patrickhickey8779]

@@karlschwaber7006 senor Bultaco would be proud if he were alive today

[@quietcool74]

Are you certain that you don't have too much trans fluid in it? They will leak out of the front overflow until the level is correct. It happens a lot when you check it in park instead of neutral.

[@scubasteve7946]

Yeah, I don't think they had it idling when filling it up, but the mopar always has to be in neutral and running to check trans level. Good suggestion.

[@haresplitter]

If it was me I would run it until it's warm and check it properly and make sure that's not the case before pulling the tranny again. Because you are 100% correct 727 will leak out until it's happy if it's overfilled.

[@mattsvantassel4693]

God gave you some MAJOR patience Paul, very humble... Thanks for the video, we hope Michelle is doing better from the wreck... Have a great day

[@moparbill311]

I am hoping Michelle is recovering well. I know all about doing it twice, thrice, or more. It is great that Paul has the demeanor that he does, otherwise we might see wrenches flying! I'm really pumped about this giveaway! As a Mopar guy, it would go well with my 60's,70's and 80's Dodge trucks! Keep at it with the family involved. It will never be a regret!

[@elijahransom4147]

I absolutely love this project! Should be a great driver when done! Hope to someday have a project just like this!

[@thatdad2977]

Love watching the work y’all are doing. Obviously your brother’s hand is feeling a bit better after learning how to hold a drill. Can’t wait to be driving my car! I like purple suede and fuzzy dice. 😜

[@jrzyboy99]

Congratulations FabRats crew on 400k subs!!!! 500k here you come!!!!👍👍👍

[@stevelapointe140]

Your perseverance is amazing! Those of us who turn wrenches for a living all have those days. No tools thrown is a win. Thanks for sharing.

[@dodgeman1978]

the exhaust bolts that go into the water jacket need to be studs,regular bolts even with sealent will start to leak ask me y i know😀

[@RandolphRelicRecovery]

And all kinds of fun stuff happens when you put a big cam in one without checking the valve guide height. Then there's the not oiling through the push rod thingy.

[@mikeroup2721]

True enough. I used studs and good gaskets on my 440 so I didn't have to redo them afterwards. Can't just drop in a gasket from above with the studs but never had a leak. My early BMW (320i) has exhaust bolts opening into the oil passage! What fun to find out the former owner used bolts instead of studs. My car caught on fire shortly after the front bolt vibrated loose. Was 300 miles from home and had to drive it back. Bought a fire extinguisher for the trip. Caught on fire once more on the way home. I started pulling over every 50 miles to retighten. Changed over to studs the next day. Good Times!

[@theusconstitution1776]

What kind of engineer would design a water jacket that’s pierce ABLE 😳on purpose🌹 junk ❤️CHEVY❤️

[@markshaw4368]

As I recall morose used to have slots on the end bolt holes to let you slide the gasket over the studs

[@markshaw4368]

@@theusconstitution1776 Don't know but his brother designed Chevy camshafts😁

[@papayork1907]

Good stuff! Ben`s a good compliment to Paul and Randall!

[@NewThoughtMediaNetwork]

Hello....I want to send a huge wave of appreciation to all of you. You create a great experience with every video...and I also want to say THANK YOU for getting my Coronet sounding so GOOD!... Yes I am committed to wining this car...just tell me what to do and I'll do it...You have made me fall in love with the idea of driving an old muscle car. Thanks again ..it is going to be great when you announce my name as the winner. (The Power of Positive Thinking)

[@jasonbirch1182]

Header gaskets. I made my own that have never blown out 10+years later. I used the regular cardboard-ish grey gaskets that came with the hooker headers, I coated them in copper rtv and laminated both sides in a thick tinfoil from a restaurant. Layed books on them while setting up. Super solid.

[@luism3930]

If I remember correctly a few episodes ago Paul said he could torque bolts using the impact gun by “feel”. 😂

[@feathorn98]

Yup. A lot of mechanics think they can too. I'm certain hundreds of thousands of engines and transmissions have been scrapped because of this.

[@johnme7049]

@Luis M Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@Mick_A_Knuckle]

Yeah I was thinking it was because of using the impact to put them in. I'd never use an impact to put cap screws into aluminum, hell I don't even use an impact to tighten screws into steel unless it's just a bracket or something.

[@KarateSensei71]

Ben is a great addition, he is just as nuts and fun as Paul, but seems to exude that calm confidence to balance out Paul a bit. Paul shouldn't make innuendos about "small tools" that Ben is using, that would reflect on his own genetics!

[@michaelpowell60]

It amazes me the amount of effort and determination on the part of the whole Fab Rats crew to bless a viewer with such an awesome gift. I love this channel, love you guys, and all that you do. God bless you all and keep the videos coming.

[@redknight1322]

I'd have been all in on this sweet ol' gal, but I live in Hawaii so shipping is an absolute no-go... won't stop me from watching the fun and games this classic MOPAR created for ya'll.

[@e.s.bryant765]

Thanks for the new video! Someone is gonna be very happy to own that car.

[@johnme7049]

@ E.S. Bryant Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@Cletus.223]

You need a stand like Tom Tom built for Matt..For Transmissions

[@reggielantagne5444]

Bryan stagg I believe he has the same thing for gm transmissions. just not one for a mopar

[@hoss1003]

Hey Paul.. When we get a knuckle scrape or cut at our shop, we put paint thinner on it. Then after it quits burning and if it's real deep, squeeze it until it quits bleeding, then add some superglue and seal it shut.

[@brewdogg77]

Paul reminds me of my uncle Paul. He owns Anderson Junction up in Moroni. They both talk the same, work the same and hate Mopar the same. I love your videos. You guys and gals do a great job. Keep up the good work.

[@u.p.tinkering]

Thanks for the upload, hope Michelle is still feeling well. Love any video of anything old mopar! Has to be a crack somewhere I think. Or something with the seal mating with the torque converter and it draining back out. Can't wait to see what it was.

[@u.p.tinkering]

Spammer/scammers out in full force in the comments!!!! lol

[@johnme7049]

@U.P. Tinkering Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@u.p.tinkering]

@@johnme7049 Oh believe me I know,LOL. I reported it as soon as i seen it pop up.

[@dennisdain987]

I had the same reaction as Ben the first time I removed that front header bolt off my 78 Dodge Power Wagon 383 and coolant spewed all over me. "What were they thinking?"

[@terencegillespie6675]

It’s AMAZING to see that F45J with a new windshield. A shocker! Startling for real.

[@vetnumb1218]

Thanks for the video. I love watching real mechanics at work. I leave a little blood on everything I work on.

[@CarswithNash]

I feel for you with the transmission but having worked in a transmission shop for a while I can tell you these things happen to even to the pros.

[@stephenstevens6573]

I'm happy to see that you guys are taking care of all of these little problems on my Coronet. As it is im going to have to rent a garage to store it, and I'm sure the owner will appreciate not having a transmission leak! Thank you! Lmao

[@johnme7049]

@Stephen Stevens Just a FYI, You have NOT been selected except to be scammed. PLEASE DO NOT FALL FOR IT! These A*Holes are hitting everyone it seems just looking for suckers.

[@stephenstevens6573]

@@johnme7049 I'm aware of the scam. I'm just kind of trolling Paul and company because I want to win that Cotonet so badly! Thanks for lookin out!

[@roynorman9185]

This car is fighting you guys at every step. It will be a great ride once it's done. Love watching it come together

[@butchgreenfield1238]

Thanks for the great videos you put out it's nice to see someone else has the same good luck that I seem to have everytime that I do a DIY project, but the thing I like is you dont give up! Glad to hear that wreck didnt injure anything but the cars!! Keep doing what your doing and make sure my Coronet is running great!!

[@cudaman-yq7pq]

Hope you find the cause of the transmission leak, hopefully it will be something easy and cheap to fix. BTW, each front pump bolt should have a soft aluminum washer under its head, otherwise they will leak.

[@johnb.carpenter6862]

You guys are really making me want the Coronet. I can’t wait to get it and then have to take it to a transmission shop.

[@moyadapne968]

Ouch, but true. It's all content though.

[@Lauchland]

That thing is cool!! My first car was a 65 mustang so I’ve always been partial to them, but over the years I’ve learned to love any old vehicle.

[@markcaldwell1245]

That’s the same stuff barbers use to stop bleeding after a nick on a shave. Clubman styptic pencils are the best. Great video.

[@mattwalker5852]

Man I would love to have that car for me and my son. Day before Easter I was put in hospital and found out I have colon cancer and my whole Colon has to come out. Anyways I love the channel and the car is nice !!!

[@febbral]

Matt, sorry to hear about your up coming surgery, I suggest talking to a ostomy nurse or ostomy group before surgery so your mind will be at ease afterwards, I had surgery at age 36, now almost 79 in two weeks. You can still do everything as before, just chew your food completely . Good luck.

[@JT_70]

So very sorry to hear that. My daughter in law 40, had her colon removed and has an ileostomy. It’s manageable but not fun. Check out Casey LaDelle’s channel. On one of his recent videos he talks in detail about life with an ileostomy bag and gives some tips.

[@scottfreerking1710]

That car needs a 4 speed with a pistol grip!

[@michaelf8302]

I greatly appreciate your heart in this desire to do this giveaway. This shouldn't be this much of a pain.. But it is a Mopar Thanks for your persistence and determination and patience.

[@MrJoe1951]

Hi all Paul and company!! Hang in there you guys. Can’t wait to see it finished and me driving it !!! Joe by Summit!

[@dustinmeier9753]

This shows why I’d rather drive a Chevelle. 😂 To each their own, though. The torque converter spinning up when you fired the engine off might have finished seating that seal. We can only hope, right?

[@10RRASK]

Heck, I’d rather have a Chevette 😆

[@The_Turbo_Charged]

69 Charger, 70 Chally would be better than all of them

[@ArjayMiller_TEAMSPYPOINT]

How many times do I have to say PUT A 4 SPEED IN IT!!! 🤣😂🤣

[@foxp2483]

That would eliminate 95% of the people who would enter the give away.

[@Eviltw21]

@@foxp2483 this is a true sad statement it's a shame that number isn't lower

[@ArjayMiller_TEAMSPYPOINT]

@@foxp2483 I'm ok with that!

[@tyendor1952]

@@foxp2483 That's fine, it gives me a better chance.

[@foxp2483]

@@Eviltw21 Every car I own has a stick. It doubles as an theft deterrent and enjoyment enhancer.

[@gwenmoody8323]

Sounds great. Michelle I hope you are doing better. Get better soon.

[@samjackson7830]

Keep em coming guys. Always anxious for your next video. All the content is great. Someday I’ll see you all on the trail!

[@SpatialDragon]

No way it could be related to using an electric impact wrench for snugging bolts... LOL Yeah, I am saying Paul needs to forget that little trick and go back to hand snugging bolts. Use a T handle, they strip a lot fewer bolts. Or buy a full set of Heli-coils for SAE & Metric...

[@benjamindavis3497]

Such fun to watch, would be such a fun shop to work in! Full of smart, humble folks!

[@brettkerby7122]

Love how you guys stay calm and don’t get mad

[@dgberry01]

On some transmissions, the outer rim seal of the front pump is a lip seal. These can fold over and cause leaks. In automotive repair school the instructor made a little tool for this. It was a loop of music wire, with the ends crimped into a piece of copper tubing. As your getting the front pump in, you run this around the perimeter of the pump as it goes in the housing, slipping the lip of the seal into the housing so that it flairs out as fluid comes against it.

[@randyfiggat3164]

Really like your videos. Especially like you know six states. I'm retired from 37 years with them. Went from Boise to Spokane. I used to do Trans and diff. Rebuild. And parts resurch for older stuff. You and your help are great.

[@a-do-hia-i-sv9593]

Putting all this effort into a give a way car, you guys are amazing! Thank you!

[@jaredbaratono897]

Paul continues to make the produce the most honest, realistic content of anyone out there. Good quality video production, without being “over produced”, and scripted. Robby Layton should take a cue. Cause he could be a Paul, or a Derek Bieri.

[@jhicks2014]

Love the content and the Coronet! My new favorite channel and awesome group of people! Very inspiring! Thank you!

[@jballenger9240]

Paul your attitude is GREAT!!!! Love how you can smile in the face of oil (and bloody, body) leaks and stripped threads, was that what the problem? As the song says, “ Just put on a happy face!” So admire your knowledge, skill, persistence and will to make it safe and work!!! You guys are good. Must run in your genes.

[@timothymorrell4023]

This episode made me remember back when me and my brother in law worked on cars when i was a kid. some days more blood leaked than motor and trans fluids. thanks!

[@Sakratic]

Paul and Ben are definitely brothers "we're learning" Love it!! Delivered it flawlessly just like Paul says it!

[@tomgardner6294]

Love that persistence! She’s still a dream car in my book!!!

[@rockweeks5697]

I hope Michelle is doing well after the accident. And it's great to see two brothers working well together. As far as the Transmission goes it's just a matter of time, and a little frustration, before you two figure it out. Great video! Take care...

[@TurncoatTony]

Gets more amazing, thanks for making these videos. It makes my whole day. Thanks!

[@kylezilke4921]

Should put the white stuff on the transmission to stop the leak since it worked so well on Paul’s finger. Ben is a great addition to the shop.

[@petergozinya7290]

Being you have a puppy dog now you’ll be glad to have that powder around for when they snap off a nail!! I always keep a tub around the house for my two fur kids!!

[@edshultz502]

Sorry to see that the Coronet is maken you all ride the Struggle Bus, but it is refreshing to know that I'm not alone on the Bus, you guy's are good at what you do and will work out all the problems, love the Blog, always looking for the next one Thanks!

[@joedenton7023]

Looking good! Perfection takes time!

[@robsnyder2461]

Congrats on 400k subscribers guys. Love the builds/content.

[@ryangriffiths2290]

I gotta see about one of those myself. That is a cool car. I miss the way they drive and look. So many memories. Awesome!

[@galenmonette5145]

No just love watching u guys tell the truth on what it takes to build anything ups and downs u kick ass

[@shaggy1958]

Appreciate all the hard work you are putting into that awesome hot rod. I hope the lucky winner will love that car as much as I would.

[@kurtolson627]

You have patience, I would probably be a patient. Love what you all do . # miles of smiles.

[@montepatton9040]

Keep at it. I’m sure that transmission is frustrating but you will get it. I hope Michelle is feeling good and not too sore from that crash.

[@williamturner8422]

Hey Paul, I see that a lot of people in the comments section are saying , put a manual transmission in it. This is a huge job on this car unless you put in a hydrologic throw out bearing. Also the trans, flywheel, bellhousing, shifter, pedal assembly would cost around 3 thousand dollars if you bought used parts.

[@byronjobe2306]

Hang in there guys, it's comin along. Motor sounds KILLER!

[@noonehere1793]

Thanks for the entertainment as always!

[@tedmorency6232]

Thanks again for amazing content good to watch after a long day of work