One of The BEST Bang For Buck Mods / On3 Turbo & GT40 Engine

[@aaronliddell4280]

I also run a stock Explorer engine with an ON3 kit. Good supporting mods (Fuel system, Holley EFI & WMI). On 11 lbs she makes 555hp to the tires. 👍

[@Neomustangs]

Bout where he is I’d think now

[@djparry2902]

What fuel?

[@aaronliddell4280]

91 octane with the water/meth kit

[@turbotoys1597]

I have a 94 with gt 40 p heads any one know how that fit whould be on the p head ? Sounds like you guys are doing well with the Fox.

[@Pushrodlife]

You have the 70mm turbo?

[@FoxcastMedia]

MAAAAAAN that little hatch was getting down!

[@Neomustangs]

Yes sir !!

[@piptyson5512]

That's a fun and reasonable street car right there. Most fun I ever had in a fox was in a similar combo.

[@Neomustangs]

Yes siR!

[@mji387]

Awesome video Neo… Love that combo where you can rip off very respectable times & cruise with your friends & family on the streets 👍🏻

[@Neomustangs]

Yes sir !

[@g8noobie4door16]

Badass simple combo! I have p heads and a edelbrock intake and a f cam. Was thinking of doing the on3 kit or spray. That combo is just so simple and works

[@Neomustangs]

Yes it does

[@seastacker8582]

Beautiful car. Love the Motorsport mudflaps even. And damn…. From low 11’s to 10.76 just with the right tires… yee haw.

[@Neomustangs]

More in it too!

[@55naudet]

I got goosebumps waiting and watching it take off!!!

[@Neomustangs]

Hell ya!

[@foxbody75smith14]

Love all the stock bottom end stuff you putt out

[@Neomustangs]

Ty !

[@TurboJoe1320]

I have a sportsmans 347 stroker block just 2 bolt mains with gt40p heads and a Holley super sniper with the on3 kit with the 76mm upgrade. Lifted a head on 16lbs of boost. Just installed head studs and I’m ready to rip my 10 sec pass too. Much love

[@Neomustangs]

Send it!

[@jasonfields302]

As always thank you for the great content!!!

[@Neomustangs]

My pleasure!

[@daviddixon3567]

Iove to see them stock ford mud flaps on any stang perforably a vert , thats different cause I ain't never seen a mut Racing at track with flaps 👌...

[@FORCE_FED_5_OH]

Stock bottom end, gt40p head, ARP bolts, 70mm on 3 kit. And other supporting mods.. being tuned by akron horse power.

[@Neomustangs]

nice

[@justintx75]

Man great video, simple easy proven. Keep them coming

[@Neomustangs]

More to come!

[@TurboRanger351]

Keep up the great work brother, I like seeing you do short reviews of other cars and combinations, I also have a 5.0 out of an 89 mustang with gt40p heads and a B303 cam and 70mm turbo . it's all going in a 2000 ranger, I haven't quite gotten it all installed yet,hopefully soon.

[@Neomustangs]

Nice thx man !

[@willsilversurfinharris6239]

@@Neomustangs nice video been subbed and watching ur channel for a but. Is he running a 15lb spring or a controller. And what gas??? 93?

[@willsilversurfinharris6239]

@@Neomustangs what slick and size???

[@davidgass8456]

Love your videos, keep up the great content Dan. You, Brew2l and Foxcast rule KZbin!

[@Neomustangs]

Thanks for the kind words man!

[@nathantuck2257]

Like the short reviews too.

[@Neomustangs]

Ty

[@frank3stangs]

Nice video Dan!!

[@brezicky]

Great video.....can't wait to build my next fox with probably on3 kit an a 351w roller I got....your channel got me on it to do one

[@Neomustangs]

Nice !

[@83mopar318]

Hell yeah that's cool. I like the short to the point videos.

[@Neomustangs]

Thx

[@VictorSanchez-kp9nt]

Great video again I'm getting more and more excited about my explorer head intake upgrade already have the e303 in it making noise but with other mods it'll be fun.

[@Neomustangs]

That is awesome!

[@sewisuri]

what up ashtabula! i got my on3 kit this week. going on my 93 calypso notch with a 331 stroker, edelbrock heads, edelbrock intake, fcam. ive been watching a lot of your videos. looking forward to more! say hi to the plats bro's!

[@Neomustangs]

Sounds great!

[@Go4BrokeOffroad]

Badass sir. Got my Mac valve all hooked up. @80 duty cycle I'm making 10psi with a 4.5 gate spring. Little ranger rips 265/55r17's

[@Neomustangs]

Nice man !

[@Go4BrokeOffroad]

@@Neomustangs thank you sir. I always want to comment on every video. Can't keep sayin the same sh*at all the time. Figured bench talk is always good in the hotrod world. I've been beating on these things for over 20 years now. I can't praise the expo 5.0 enough.

[@Neomustangs]

Yes sir !

[@davewwillis]

That is a good looking car I like his wheels.

[@Neomustangs]

Yep the Jegs ones

[@out_foxed_gt]

Love any content that you post keep it up brother!!👊🏻

[@Neomustangs]

Thanks! Will do!

[@JustAvignone]

Love this stuff! Definitely looking to do a similar setup just to tool around town and have fun!

[@Neomustangs]

Nice man !

[@johndoe-zb8bm]

Love the stock bottom end stuff with some select bolt on's!👈🔥💯

[@Neomustangs]

Right !! Me too

[@damianhughes7034]

Fixing to build stock bottom end 5.0 gt40 topend ported with vortech v3

[@Neomustangs]

Cool

[@rafaelroman5649]

Wish I could of just kept my setup up stupid simple like you say!!

[@Neomustangs]

Yes sir !

[@mr88lx]

Wonder what his fuel system is looking like

[@MuricanMiata]

Running my Miata on a explorer swap with a wct5, tbird 8.8 rear end, and a holley sniper. Semi gutted car thats e85 ready Id love to see if I could crack low 10s on my mickeys. I know what I gotta get this winter lol

[@johndosh2469]

Good shit ..makes me hate my decision even more

[@Neomustangs]

Yes sir !

[@turbotoys1597]

I'm guessing springs and rollor rockers on heads at least. Love it. 3:10

[@shawnrussell6464]

I got same set up love it explore gt 40 heads and intake my put together turbo kit on megsquirt ecu

[@Neomustangs]

Simple and effective.

[@johnmilner6505]

Shoot.. the best bang for your buck in my day on a fox was to 351w roller block swap it.. with a good set of Windsor Sr heads..f cam..

[@Neomustangs]

Ya I remember. That changed with cheap turbo kits around 2007

[@brandonrickbornponyexpress6574]

Enjoyed it man 👊

[@Neomustangs]

Just a short video!

[@brandonrickbornponyexpress6574]

@@Neomustangs yep short and sweet. I like em like that. If it's past 10 minutes I probably won't watch unless I'm really interested.

[@anthonycortinas30]

That's sick love it

[@Neomustangs]

Thx!

[@anthonycortinas30]

I have a 85 foxbody gt that I want to turbocharge. I also have a 91 gt with full bolt on stock bottom end and a on3 turbo kit runs great I love this shit lol I love you content as well buddy keep it up.

[@GearHead704]

Cheap power to go fast with an On3 for sure

[@joetheman357]

Love it. Wonder if i could run that setup on a stock explorer make a little turbo sleeper awd beast lol.

[@Neomustangs]

Yes sir

[@zachs1985]

Hell ya! You are that guy out there helping others achieve goals. Fucking awesome 👌 positive people keeping the car community alive and healthy. Too many toxic ass hats out there sometimes.

[@Neomustangs]

Thanks man!

[@Blznstang]

Damm I can’t wait to work on my tin can notch gunna throw a DSS built shortblock and get the on3 kit and let her eat

[@Neomustangs]

Yes sir !

[@tedoakley5600]

that is such a cool ride!!! I’m glad he hit 10’s. I’m really on the fence about going with an On3 kit or a full top end build. Going for a fun street car to play with after work and on the weekends. I got about 5k to spend including labor. Any recommendations? thanks in advance and I love the channel!!! Just subscribed=)

[@Neomustangs]

Honestly they both will work great. Tune is a key part of that

[@azblueovalfan7192]

The combo just works lol

[@Neomustangs]

You know lol

[@jpp9846]

Still uses A9L too... At a time factory ECUs are being vacated, nice!

[@Neomustangs]

Yes sir !

[@jakejohnson3523]

I love it!!

[@Neomustangs]

Yes sir !

[@gordonbaliles2389]

Awesome video love seeing vids like this. What size slick y’all run on that car

[@Neomustangs]

26” and thx !

[@ericestrada197]

Do I need to do anything to the stock to tune it ? Anyone know who can tune one in socal area?

[@Neomustangs]

The tuner will have. A chip

[@92BiminiCoupe]

Hell yeah!!

[@Neomustangs]

Ye sir !

[@MrMtopp2]

I’ve been thinking about on3 the only thing not sure about is MAF, most videos I see is no MAF but they show a kit with MAF, not sure what to do? Any help would be nice thinks

[@Neomustangs]

MAF if you tune A9L and quarterhorse. No MAF if you run terminator X

[@lingyguisar4149]

How's this combo with a C4 transmission??? I know stick is way more fun. THANKS 👍

[@Neomustangs]

Mid low 10s

[@lingyguisar4149]

@@Neomustangs what stall torque converter and rear end gears? Again thanks man!👊👍👍

[@lamarrichardson1782]

Hell Yeah

[@Neomustangs]

Yep !

[@ilike9s]

Good vid

[@Neomustangs]

Ty !

[@joshuaarthur213]

I have a 95 cobra that I would like to boost I also have a 01 explorer engine so my ? Is. does either engine have forged pistons or do they have hyper pistons and how do they hold up to boost

[@Neomustangs]

Hypers are known to not be as good as forged factory however its all in the tune. IMO

[@joshuaarthur213]

IMO? And thanks for the info

[@Neomustangs]

@@joshuaarthur213 in my opinion it’s all in the tune. iMO

[@joshuaarthur213]

@@Neomustangs idk if I want to keep it stock bottom end or not idk if I keep over thinking it or not lol

[@hectorrodriguez4263]

I’m running a 302 block with gt40 lll bar heads Edelbrock intake manifold BCam Would ON3 be a nice upgrade? If so where can i find a kit. Please advise Thanks!

[@Neomustangs]

Yes it would. Don’t forget tune !

[@hectorrodriguez4263]

Where can I find On3 turbo

[@Neomustangs]

On their website ?

[@NoFox_Given]

Stock block 🔥, mines a 89 block stock crank 306 runs 6’s in the 1/8

[@Neomustangs]

Cool

[@turboman351w3]

oooo man i missed the 9.80 pass

[@Neomustangs]

How was the main part of the video lol!

[@djparry2902]

Was the fox running e85 or pump 93?

[@Neomustangs]

Pump 93

[@robfate8781]

Great job again. I have a on3 kit sitting next to my 90 lx. Your videos are making me think I should install it. But not sure who can tune it. Who do you use?

[@Neomustangs]

You should! I tune myself with Dave here in NE Ohio. Your close bring it here. Make sure the cars right!

[@jdrods1519]

Damn!!! 🇺🇸💪🏼

[@Neomustangs]

Yes!

[@roberthannajr7129]

Do you know what injectors and fuel pump he is running. Love your channel.

[@Neomustangs]

42s and wired 340

[@Flyingdoc74]

What rear gear is in the LX?

[@Neomustangs]

355i do believe

[@emartin1071]

Hey Dan, do you run a CD ignition box such as MSD on your turbo cars? If so did you see any power gain or need it to take care of a miss? thanks

[@Neomustangs]

It would help yes. No CD tho

[@emartin1071]

@@Neomustangs ok thanks for the response. I'd say you made really solid power with basically stock ignition.

[@emartin1071]

@@Neomustangs ok thanks for the response. I'd say you made really solid power with basically stock ignition.

[@mitchescobar1060]

Damnnnnnn 🔥🔥🔥

[@Neomustangs]

zooom!

[@jaydollar140]

How much power is he making neo?

[@Neomustangs]

I think he said somewhere around 500?

[@kennyp4967]

What size turbo do you have on your car

[@Neomustangs]

76/75

[@bluecollarfox916]

Awesome. How much boost?

[@Neomustangs]

16 pounds

[@bluecollarfox916]

@@Neomustangs yea that’s a decent amount of boost haha

[@daviddixon3567]

Tight stock fan an 5Oh Efi..

[@mustangmike4078]

I also enjoy watching somebody squeeze every last bit of performance out a basic combo including a lot of stock parts. Some people will practically shun your ass for saying you like 2.3 turbos also but I do like to watch the shit get beat out of them also. I love all the fox's, even the lowly SVO 😒

[@Neomustangs]

Well said!

[@mustangmike4078]

@@Neomustangs what about you... can you dig on some 2.3 turbos?

[@blindluckmechanic876]

What kind of power does Randy’s car make on that setup and on what psi? Wondering bc I have a similar combo I’m putting together.

[@Neomustangs]

No idea. He just turned it up last year drives on 15/16 pounds lol

[@Neomustangs]

Ya Neomustangs

[@vrm86gt]

hell yeah, that car has mid 10's no problem!

[@Neomustangs]

Easy

[@chrishorst6993]

Like this video

[@Neomustangs]

thx!

[@frankquattrone3761]

Glad to see my old turbo kit still putting power down! Good pass randy!

[@Neomustangs]

Never counted out !

[@pimpovic2]

T5 trans? 10.7x is nothing to sneeze at.

[@Neomustangs]

Nah he had a tremec. 10 spline tho.. so

[@pimpovic2]

@@Neomustangs boooo 😁

[@azblueovalfan7192]

Last time out I peddled it to an 10.87 with a t5 but I have a mostly removed interior but I'm running 10psi our next drag even here isn't until Dec 4th so I got to wait to make more passes. I have some crappy videos on my channel.