One upgrade you really can do yourself on your Defender.

On the right vehcile, panoramic glass can look stunning, as well as transform the feel inside the Land Rover Defender. Fitting it yourself can be a little scary, especially if you have to cut massive holes in the side of your hardtop! But, follow this guide and you'll see it's a easy DIY job that anyone with a jigsaw and a steady hand can take on!
Parts used in this video are available from LRParts - just click the link below:
PANO-90 - PANORAMIC TINTED WINDOW KIT - FOR LAND ROVER DEFENDER 90 VEHICLES - SIDE AND REAR WINDOW KIT
www.lrparts.net/pano-90-panor...
PANO-110 - PANORAMIC TINTED WINDOW KIT - FOR LAND ROVER DEFENDER 110 VEHICLES - SIDE AND REAR WINDOW KIT
www.lrparts.net/pano-110-pano...
LRC3089 - PANORAMIC TINTED REAR HEATED WINDOW - FOR LAND ROVER DEFENDER 90 AND 110 VEHICLES
www.lrparts.net/lrc3089-panor...
Chapters
0:00 Introp
01:51 Removing the support pillar
03:03 Measuring and marking the hole to cut
04:30 Making the cut
07:13 Priming the glass and panels
08:15 Applying the bonding agent
09:00 Fitting the side glass
11:53 Fitting the quarter panel glass
14:13 Fitting the rear door glass
15:48 Finishing trim
16:36 The finished product

[@tomthompson7400]

worth mentioning that once you put the sides in especially its well worth checking that the sides and rubber strips are sitting well against the glass as its easy to push the sides out and it leaves a bad looking gap on the inside .

[@stevenharrison9257]

I did this job on my Firenze red 2001TD5 SW just over a year ago; what a transformation! The dark glass looks fantastic against the red & replacing the old, leaky, insecure sliding windows lifts the whole vehicle. It's an easy job (especially as I already had the side window cut-outs), so don't be afraid to tackle this job yourself.

[@Jason-cl8hk]

I had mine done with VGS who did a great job on my Corris Grey 110 but I agree, on a Firenze red vehicle, it would look even better.

[@millin2222]

@LR Live Looks nice, can I ask did you do back right window. Or did I miss it??

[@LRLiveUK]

yes, I did both but just covered the fitment method on one side.

[@millin2222]

@@LRLiveUKunlucky for me, was hoping to see how you tackled that side as I made a right pig's ear of mine

[@upscaleshack]

I've seen these that didn't have the opaque part to hide the glue and they look tacky as hell. This look isn't for everyone I guess.

[@LRLiveUK]

yes these are much cleaner. And the only ones that are insurance approved too.

[@marksellers665]

Looks like a downgrade

[@mikemorris96]

There are good job’s on KZbin but that is not one of them

[@grahameroberts8109]

I wouldn’t like to be following these types of windows at night. They look like mirrors and could be too reflective. ☹️🙈🦘

[@stevenharrison9257]

No more reflective than the privacy type you see in all manner of cars, SUVs, campers, etc.