As you say you don't have to use the supplied switch and in my opinion it's best not to as they are cheap crap. Any half decent switch with 1/4 spade terminals will do the job. I used an Arcolectric one.

What a fantastic and clear video, particularly for the actuator arm, very helpful indeed & got mine running much better.

Ive had 2 of those sealey oil pumps both failed quite quickly not bothering again

Na D3 de um amigo estava assim só foi desmontar a placa ali onde tá o botão que engata a redução e limpar td com limpa contato q voltou ao normal.

She’ll be right mate. While you’re at it, check your description spelling typo. Cheers 👍🏻🙏🦘

Luck in battle !

that pan is the same as i have on my 6hp out of an 06 bmw x5 ,i know this may seem daft are they not the same box could it not be coded into the disco , i would of just drilled a hole in the old pan were it is in the new pan.

It’s easier just to use a hand pump, I tried an electric pump it’s to much faffing about!

I've just changed the fuel pressure sensor, it now comes on fault code F when you put the key in the ignition, it's never done that before. Any ideas?

Just needs flushed

Herecy! 🙂

Mine fixed itself😂

@LR Live What diameter coolant hose did you use for this?

Good job done Christian on LRTime did the same repair to their D3

When I saw the words"easy way" I expected you to butcher the beige facia trim like many have done to slide the matrix out in 15mins. Thankfully you didn't go that way. Triming the black plastic as you did caused minimal damage and didn't leave a horrid gash that was visible. Too late for you now, but the Nissens heater matrix at £63 for the D3 has removable heater pipes. Ive found Britpart spares are pretty Chad Valley. But you overcame it easily so its gonna be a breeze the next time it clogs up. I got luck with mine, I bypassed it so I could drive it. I flushed it through in both directions with a garden hose then I filled it with kettle descaler. I left the descaler in over night, flushed and reconnected and bled it. Its all good now.

@LR Live Before you replace these parts was the heating in the car just blowing cold, prior to that did you know if it did work then it gradually stopped getting hotter, my 2006 l322 the heating did work when we first bought it and now it is just blowing freezing cold.

Looked to be a 3 hour job. Could you have done it without removing the door handle?

Good for you the matrix can be removed without dissembling the whole dashboard.

You just Made life a bit easyer for LR3 and LR4 owners. I was thinking about doing this. But I had no example to do it. Do you think that you can put it out without entertainment system. Just by cutting the under dash plastic

I have a 2005 V8 petrol disco 3 and have done the same conversion as I was sick and tired of the air suspension faulting whilst I was in the middle of the outback (Australia). It was the best thing I ever did. I have done two other mods since.... I added a 20mm spacer to the top of the coils at the rear only and I substituted the kit coils with the Kings KRRR-14 coils (heavier duty than those supplied with the kit). The result was that the car's ride height is similar to the air suspension "off road" setting. I don't have any sag in the rear and don't have any "roll" as you demonstrated. My car has since, done the Victorian high country and the Simpson Desert and I couldn't be happier. Great video... wish I had access to some guidance like this before undertaking it myself... keep up the great work.. cheers

We had the heater matrix issue on our 190k D3. Our local (very reputable!) independent LR specialist did the work for us and offered to cut that piece of plastic trim too to save a heap of labour - so we did just that!

Stop buying Costa coffe then you can afford repair bills 😂

Fair play for the novel approach to an otherwise tricky repair. It's definitely coming together 😊

I wholeheartedly approve of the bodge, you did what you needed to do given the budget, it was neat and it worked. Tip job.

Should not have poured that muck into the domestic drain system! 🙈😳🙅‍♂️👹

Pretty good solution to a headache

You should have watched LR Time. They did this a week or two ago....

Good result and the workaround with the new pipes seems good to me, no one will see it. I would of cut that trim panel too, whats a design error. ! Good thing about the 4.4 V8, is it heats up very quickly. a Bit cold in wiltshire today so I was very pleased to use my heated steering wheel I retro-fitted.

Good result and nice workaround 👍🏻

Well done on persevering through that one. I wonder if anyone has ever made/worked out a pressure flush processes to blast the crap out of the matrix. If you can get to the input house in the engine bay and then suck or blow or water pressure it out. If mine ever fails I may look into it. Might be too late to say but I made a 3DPrinted bezel that fits a Carpuride 7in unit in place of the original Sat nav and looks totally OEM, it’s on Thingverse.

Exactly what l did 👍 …. Those existing clips are a nightmare !!!!!

That was a result, cheap heat : )

Check those pipe connections aren’t leaking before you put it all back together! Reminds me of my p38 matrix!!!!

Flash backs to an Audi A4 I did.

Sir i need your advice. I have series 3 3doors. Is it possible to change to front frame into to defender front frame?

If the problem still not fixed. I had the same issue fault code p004b-77. The garage who found it told me to take to dealer as it happened within a week of purchase to get it fixed free of charge as the main dealer gave me a year warranty. They told me to check turbo actuator+bypass valves+vac pipes. Honestly I don’t know if that’s what the dealer checked/done, but the issue now sorted since done 7k miles had no issues. Hope this helps

I used it and didnt see any improvement 😢

Will this stuff clean gpf /ppf filters in new cars ?

Hello. Is this no longer being made/sold? Thanks

❤❤❤❤

Do you guys or this website sell Grilles for Radiator cover , 2001 Discovery ll ?

Hi I got an issue with my epb when I apply the brake it makes a nasty noise would it be the shoes or module ?

Main driving beam not going up on the far left to highlight the nearside verge. Not sure it will be a mot problem?

Moni moto are good trackers. For bikes really but being battery operated with a good battery life can stuff it any where

She is a beauty ❤

Where can I buy a 110 dashboard brand new LHD

have you done anything to the chassis?

My 56 plate sport only got mild heat coming out of drivers side only...I feel blessed....enjoyable content on disco 👊

Is it just a standard 300tdi filter being used?

The resistor you changed only regulates the fan speed, the sign that they have failed is when you only have max speed on the fan. If you have no heat coming out it will be a blocked hater matrix. A pig to get too, so try a flush first.