How To Install Ring Pro 2 Doorbell

[@kushalphoenix1]

Attaching the doorbell to the mount is a little difficult but once it locks into place it seems extremely sturdy. kzbin.infoUgkxxHZwMa8CsRjYhf9s4W8w0Dwm47uytWOp I replaced my regular doorbell with this and hard wired it in, using my existing wires and mechanical chime. It works perfect so far and integrates perfectly with my blink camera system. It also works seamlessly with Alexa

[@jassymoore29]

Really good video. Super precise and clear instructions. Thanks for the help!

[@joyyyyyyyy]

This video is much better than the paper instructions! Thank you so much!

[@fersenashya4962]

Excellent instructions, very clear voice. thank you for the assistants

[@Dhi-fe5eu]

Great video. You spoke very clear. I love how you went through all the steps needed.

[@leebearlondonlee]

Thanks so much for this, I would have probably hired someone to do this for me if I hadn’t seen your video.

[@albertoperez1947]

You make very good clear a straight video. Even people like me who are not expert i understood all the instructions. Thanks a lot.

[@PearlTheSpinster]

Hold on plot twist😂😂 😂.what this extra stuff in the box

[@franksteffero7714]

Thanks for the video. It really helped my installation go smoothly.

[@OneHourSmartHome]

Glad to help! Thanks for watching!

[@jpg901c]

Needed just a bit of guidance on installing the chime transformer. Rock solid. Thank you!

[@boykinlp]

I appreciate your installation video. I just got mine and am ready to install it myself.

[@Galucia]

I had to try way to many videos before finding this and getting clear instructions on how to remove faceplate. Thank you.

[@begaqincer]

Not sure if you're an instructor by profession . But this is a high quality video.

[@glennmeghani3181]

i have never had such a clear tutorial as these. Thank you. Really precise and so easy too follow step by step.

[@ladyfirehorse2230]

Great tutorial. Clear and precise! Thank you! 😊

[@lynneftw]

Warning: DO NOT attempt to drink a shot every time he says "go ahead" or you WILL get alcohol poisoning or liver disease. 😅

[@PearlTheSpinster]

😂😂😂😂

[@MDTAR15]

Super precise installation video. Better than the rest.

[@OneHourSmartHome]

Thanks! I appreciate the comment. Glad I was able to help.

[@26-CJ]

@@OneHourSmartHomewe’re you using VS 3 of the power adapter in this video? Trying to figure out how to bypass my mechanical doorbell chime and use the Ring Chime Pro by itself? Do you know how too

[@maryzpugz1]

Great instructions! Thank you!!!

[@mayflower2158]

This was literally perfect!! Thank you!! You made it seem so doable for me! Yay

[@RightToFreedomGirl]

NO IT WASNT PERFECT DOES IT MATTER WHERE THE RED WIRE GOES VS. WHITE?

[@thomasking9221]

Thank you. The instructions with all these Ring products are pretty lame. I installed the whole house security system and decided to add the doorbell even though I have a front of house free-standing camera. This video made it so much easier to install.

[@Killian665]

If you have a prime chime doorbell you don’t have to use the power kit and all that with the Ring or worry about having the right transformer. Makes everything way easier.

[@diyeric4114]

Do you still have to upgrade your transformer even when you have fitted a ring power adapter.

[@animalpants]

Great step by step instructions. Thanks

[@jsmorton674]

Excellent instructions. Thanks so much!

[@FaiyzaBeg]

Your instructions are so much better then the app itself! Wish they made a wireless version of this!

[@ricpaney]

Is already in the market wireless ring

[@JMD535]

Ha! We have the same Doorbell Chime unit! Hmm,...I imagine millions of others has the same unit! LOL!

[@cohall46]

Very helpful. Thanks for sharing.

[@OneHourSmartHome]

Glad it was helpful!

[@bg4406]

What is the purpose of that little battery being connected to the doorbell chime transformer???

[@wesharding2663]

Fantastic! Great video!!! Thank you!

[@6ft5jw]

Thank you for the video. Was able to install myself bcuz of your detailed video.

[@amck72]

Great video and easy set up. I can`t wait to get mine.

[@BigBrownTruck22]

Is my existing, mechanical chime supposed to ring when pressing the Pro 2 doorbell button? Because mine doesn't. Everything else seems to be working though.

[@thischildishlifestyle]

Did you ever get an answer to this ? Mine is the same way.

[@BigBrownTruck22]

@@thischildishlifestyle Nope. If I work up the energy, I'll call Ring and post their response here.

[@thischildishlifestyle]

OK thank you. I'll do the same.

[@ihadlunch8575]

I just installed me ring pro 1 . The mechanical chime rings about 1 second after pressing the ring pro button

[@howardj2878]

Excellent presentation.

[@AncientAviator]

Great video! Thanks very much!

[@OneHourSmartHome]

You bet!

[@fredthedude2]

Great video. Is this worth spending more money on over the Ring Doorbell Wired? I am doing a full renovation of my house, so I will put new wiring from the electrical transformer to the front door and use a Ring Chime. I don't have an existing old-school chime in my house.

[@mikesando7766]

Late, but how did it work out? Plan to do the same.

[@fredthedude2]

@@mikesando7766 Works like a charm! I bought the Ring transformer that converts my 230V power into 12V (I think) and had the electrician hook everything up inside my fuse box. Works really well, so nice that i dont have to worry about charging any batteries and the video quality is more than sufficient for me. Edit: Forgot which video this was connected to. I bought the Doorbell Wired version, and am really happy with the cheaper option

[@mikesando7766]

@@fredthedude2 thanks for the reply.

[@michaelbellsmith5113]

Thank you

[@Bklynpimpstress]

Does this disable your house original chime? When connected?

[@roderickstewart4043]

Can this doorbell be installed without existing wires?

[@DaddyODylan]

Awesome video, I really liked the step by step. One suggestion, go back and blur the address.

[@teymoors]

Thanks

[@fabianreid7368]

Great Video !!

[@mjlcarguy54]

Great tutorial thanks

[@rave2173]

Does this need a diode for a digital doorbell to play its full tone ?

[@Ken-us2uw]

thank you. great helpful video.

[@fiftyfabulous1775]

Do you have a video that shows how to install the corner mount?

[@RobertM949]

You should install that ring power “adapter” first and then the doorbell. That protects the doorbell from voltage spikes. Otherwise you risk damaging your ring camera before you even get it installed.

[@GranPuba]

Well the first thing you're supposed to do is flip the breaker. So you shouldn't be getting a spike through the line if you flip the brake or on the doorbell.

[@safehaven3486]

Robert is right. The Pro Power Kit ensures that your Ring video doorbell gets the power it needs and Must be installed before you install your video doorbell. I just followed the video and the doorbell worked at first. (FYI i flipped the breaker and switched it back on). After I installed the adapter it is no longer working. So now I'm guessing it's fried

[@larryc2321]

Thanks..... Very Good....

[@MrPhynesse]

Great video!!!!

[@justinbraun3503]

Great video. You measured 11V in your linked video with the multimeter, but the Ring Pro 2 you identified is a min of 16V. Your ring pro 2 works on 11V? How does it work at night in the dark?

[@binbobby]

You don't need to install the frame support for the camera? Other videos show 2 components getting bolted to the door

[@michaeltang2309]

My new house doesn't have 3 terminals on the bell (no Transformer). Does it gets really hot??

[@joeybowdoin986]

At 6:37 it shows an address, I just want to make sure it gets blurred if that is your address

[@sahebahmed8237]

What if you have 2 door bell chimes

[@LonestarTXDL]

I see on your video to check transformer voltage, you show yours is 11.48 (looks like the exact door and doorbell). Then this video you state that your transformer is sufficient for the 16-24 requirement for the ring pro 2. Did you upgrade the transformer or are you using the 11.48 transformer for this pro 2?

[@mrodz65]

I second this!

[@jpaube1]

Do you have to install the ring power adapter? would it still work okay with out it? i have no intention on using the existing chime

[@42Slab]

Surprised nobody responded to you but for future installers with the same question, no you do not need the power adaptor unless your voltage is below the threshold of 16v after testing.

[@johnisaac566]

@@42Slab NOT TRUE. I actually read your reply before installing and my ring pro 2, it was getting hot and wouldn't connect and acting all weird. I called tech support. Told them I had 16 A/C volts at the door bell, they said it doesn't matter you have to use the power adapter. Hooked it up and it connected right away and didn't get hot anymore. Use it!!

[@42Slab]

I've had 2 ring pros now and haven't needed it so...

[@episcopas]

Let me clarify my question. There is AC wiring for a doorbell, but the previous owners installed a battery operated one. So, my questions about the white wires and what to do with them.

[@steveo6715]

Thanks - perfect tutorial and allowed an easy installation.

[@ricpaney]

Power adaptor is necessary ??? What about if I have wire straight to from panel to ring

[@congsan3528]

After installing the Pro 2. I accidentally passed the selection option of my mechanical chimes check. Now, the mechanical chime in the house does not work. Any suggestion? THanks

[@natalie7759]

Can i ask for working with existing chime for the Pro2 if it sounds your existing chime in the house when the buttons pressed on the Ring. I keep seeing yes and no on google, so im unsure if need to buy a chime or if the doorbell will sound in house as normal before installation. Thanks

[@clisaa6974]

^ Do you have to install the power adaptor? I have an OG Ring, that we never used a power adaptor. We installed the ring replacing our old ring but it says transformer voltage poor and power input 3.

[@tambui5775]

very good

[@bwilsonscuba]

Do you need two power adaptors if you have two ring pro 2 doorbells?

[@TrappedQue]

Does the chime power adapter comes with the Pro 2?

[@jesusc1834]

Does it matter which side the red and white cable is screwed on the ring doorbell?

[@Red23165]

thanks

[@lookforbriansjazz7832]

How do you know where the red or white wires went on your new Ring unit? Thanks!!

[@ArtCardenas]

does the blue light turns on when motion detection or darkness? or only when pressed?

[@odiebravo4543]

Did you change your transformer? I noticed in the video where you tested for voltage it was below the required voltage.

[@ciaranh5907]

How do we install these if you don’t have an existing doorbell or wiring ?

[@Gingerlion777]

Then you need the one with kabel

[@dlyons1721]

My doorbell had power but couldn't connect to my internet. The suggestion was the router was too far away from the doorbell although it's only about 25 feet. Also the original wired doorbell chime didn't work. Is this related to the failure of the doorbell to connect to the internet?

[@spikedaffy]

what does the power adapter do ?

[@charlesthomas6987]

Great video. What if you don’t have a chime box for the pro 2. Does ring sell a chime box or a full kit with a pro 2?

[@episcopas]

What do you do with the white wires?

[@RightToFreedomGirl]

WHY didnu SPEED UP the wiring part? Omg thats the most important part. Does it mayter which wire goes where?

[@pierremiche20]

Hello, I bought 2 ring doorbells, one for the front door and the other for the back door. The one in front is installed without problem and the one behind cannot install, the ring instead of the light going around in circles it flashes rather it means there is a problem. Can you help me please

[@tiggersmith7393]

Why do you have to add a power adapter?...there is already power right?..

[@earlisking]

Does it work if your doorbell wires are on the side of the house and not facing the front of the house?

[@VOLTRONDEFENDER4440]

if your doorbell button is lighted and no power you can easly tell when the button isent illuminated

[@tomnugent6525]

How high up is the doorbell on the door frame out of interest?

[@TheRealityTwister]

My Ring Pro is getting to 140def F very hot and it stops working.. any clues?

[@BlahBlahBlah12323]

I hooked up the ring doorbell, and turned the power back on. I heard the doorbell speak. Then, I had to turn the power back off because I forgot to install the power adapter. I did that, and now I have no power to doorbell and none in the lines that go to the chime. Did I just fry everything?

[@miggonza25]

where can i buy the ring pro power kit v2?

[@Smedley61]

After installing the power kit, the Ring Pro 2 works but the health says the voltage is poor. I measured 9.8v at the doorbell. If the powerpack is working, should I be measuring around 16v at the doorbell? Thanks.

[@ballerprodigy1987]

Did you find a solution to this?

[@Smedley61]

@@ballerprodigy1987 I replaced the house doorbell transformer (from 1987) with a 16V I bought off Amazon. No issues.

[@richardnewsom1385]

Can I add to more than 1 iPhone to the account, such as my wife and I.

[@kr6277]

Recently installed the Ring video doorbell pro 2. We love it, but having issues with the transformer voltage reading in the Device Heath tab on the app. The pro 2 needs 16-24 volts and according to the Ring app, the voltage is around 16 which is good, but at times it drops to 15 volts and then I get a "poor" reading in the Device Health tab. Ring told me I probably needed a new transformer, however none of us can find it. My question is, if the voltage drops to 15 periodically, it that ok? If not, sounds like I'll need a totally different doorbell since we cannot locate the transformer. Any suggestions would be appreciated Thanks!

[@OGCJ10]

Did you figure out what the problem was ?

[@whatthe2458]

Look in side your furnace. May use the same one to power your thermostat.

[@OGCJ10]

@@whatthe2458 can you explain?

[@victorvek5227]

With my porch light on, and HDR set to off, I get full color recording at night. But if I set HDR to on, with porch light on, it records in black & white only. Anyone else having this issue with the pro 2 doorbell??

[@grumble555]

What is the purpose of the "Power Adapter"? Will it matter if the existing transformer is 10 VA?

[@OneHourSmartHome]

The Ring Pro 2 requires 16-24V AC. If your transformer puts out 16V - 10VA it may work however typically 16V 30VA is recommended like this transformer: amzn.to/33NlY0r The purpose of the power adapter/booster installed in the chime is to provide a reliable power supply / boost for the Ring Pro 2 because it uses more power than the typical battery powered Ring Doorbells like the Ring 4 Doorbell: amzn.to/3fnyzNh. If you have 10va it may work, but if you are worried it will not work and you don't want to replace the doorbell transformer the Ring 4 would work in that situation, however the Ring 4 video quality is not as good as the Ring Pro 2 Doorbell video quality. I just posted a review on the Ring 4 today: kzbin.info/www/bejne/eaO2aYWka52tsK8

[@rayansworld2606]

Fun fact:Ring video doorbell pro 2 plug in doesn’t need a pro power kit

[@redeclipzegsx]

Are you sure? How wouldn’t it need it?

[@xversacex]

Anybody able to please assist? What if I only have a doorbell transformer? It only has two prongs that have screws. How do I know which is "trans" or "front" (assuming I am supposed to install the ring power adapter to it)? Or is there no specific orientation, just as long as the power adapters prongs are mounted to each transformer prong? LoL not sure if I'm using the correct terminology. Issue was we have a Video Doorbell V4 which does not stand a chance in Canadian weather... Have to go with the Video Doorbell Pro 2 now.

[@michaelwas8549]

Where's your resistor?

[@munroe40]

I have humming from my transformer

[@Outdoorshuntingshooting]

Great job, unlike the ring instructions provided, absolutely effing useless.

[@jover936]

Mine won't fit

[@reemie786]

P.S U location is shown in the video

[@genghischuan4886]

the door bell is just low dc current, might not be what folks think is safe but I did mine hot, didnt feel a thing

[@TANOSTONE]

I am in South America and we use 220v. Currently my doorbell has a transformer with the following specs: input: 220Vac ~ 0.55A - 50Hz. Output: 12Vcc -1.5A, Max 18w. Can you confirm if the Video Doorbell Pro 2 will work? Thank you!!

[@TheNpcNoob]

No it won’t, needs 16-24v

[@AceBMartin]

🔥💪🏾

[@premacy2003]

How do you install if you don’t have an existing door bell?

[@TheReap420]

Drill new holes

[@Barberbear78]

thanks and FYI nice beard! XD