How To Set Up Blink Outdoor 4 Camera

In this video we teach you how to setup the Blink Outdoor 4 Camera which was launched in the summer of 2023. The Blink Outdoor 4 is a wifi battery powered smart security camera.
Blink Outdoor 4: amzn.to/44EzHnc
The Blink Outdoor 4 Camera was launched in August 2023, and is an upgrade from previous generations of Blink Outdoor Cameras. It is a wifi battery powered smart security camera. The Blink Outdoor 4 Camera runs on two AA batteries and can function for up to 2 years with just battery powered depending on usage and settings. The Blink Outdoor 4 is easy to set up and easy to use. Being that it's battery powered it allows you a large number of options for placement of the camera. It's important to note that the Blink Outdoor 4 Smart Security Camera does require a Blink Sync Module for set up.
What New Features Were Updated With the Blink Outdoor 4 Camera
-The Blink Outdoor 4 can be used indoors or outdoors.
-It has a wider field of view with 143 degree viewing angle.
-It has enhanced motion detection
-It has AI person detection
-Improved image quality and improved low light and night vision image quality.
How To Set Up Blink Outdoor 4 Camera:
1) To set up the Blink Outdoor 4 Security camera you will need to download and install the Blink App, create a username and password and login.
2) You will first need to set up the Blink Sync Module to get the Blink Camera set up. Plug in the Blink Sync Module to power and then follow the in app instructions on the Blink App to set up and connect the Blink Sync Module to wifi.
3) With the Sync Module connected you will need to install the batteries in the Blink Outdoor Camera 4. To do this you will remove the back cover with a screwdriver or coin. Then insert 2 Lithium AA batteries into the Blink Outdoor 4. These are the recommended batteries for the Blink Outdoor Camera: amzn.to/3PprXkX
4) Follow the instructions in the Blink App to set up the Blink Outdoor 4 Camera and scan the QR code on the back of the device before replacing the battery cover.
5) The app will guide you through the remaining set up and connect the Blink Outdoor to the Blink Sync Module. Your Sync module must be powered up and connected to wifi for the Blink Camera to function.

[@fullcustomization]

Nice video, to the point, very grateful.

[@Ruby-ur2qo]

Thank you so much this was beyond helpful. Quick question does the sync module 2 have to be plugged in at all times?

[@1AmandaDanger1]

This is my same question.

[@jul5385]

Does the Gen 4 fit with the older mount that came with the XT2?

[@michelerossie623]

Thank you!

[@apav7946]

I'm boxing this thing up and returning it. Two hours trying to connect it. I told my husband to stay with devices that are RIng brand. He didn't listen.

[@rottimomtwo5477]

Yep same here. Module won’t sync to my wifi and created new network. Junk

[@chamomiami]

Ring is better because can be hacked...

[@marthasantiago8661]

I’m dealing with the same issue. Ugh

[@theckra19]

sooo FCKING TRUE

[@alexisthornlow8058]

Thank you! Does anyone know what the little port is on the back of the camera? It is covered by a little rubber piece. I can't tell if it's a charging port? But why would we need a charging port if we have the batteries...?

[@MisterDGM]

I thought the same thing then I found that you can use the C port to run a cord to power it without batteries.

[@eseperro213]

Thank you, sir. 😎👊🏼

[@terrytrump4751]

Thank you so much for this. The instructions that came with my cameras were terrible. The only thing you didn't mention was if I have to go thru this procedure with each camera ( I got the set of 3). But, going to scan my 2nd camera to see if that's what I need to do. It's so much easier when watching exactly what needs to be done. Thank You, Thank You, Thank You!!!

[@patloftus9928]

I did finally hear from a tech who walked me through the entire procedure. It's been a while but if I remember correctly you have to delete the camera or door bell THEN enter the code on the back manually onto your new network. I'd delete the old network. Look on it's own tab and delete. I'd do this BEFORE trying to attach to the wanted, new network. This prevents any product from automatically trying to reattach to the wrong net work. Give it a shot and let me know if I remembered correctly.

[@glennfriant1817]

how do I get my app to show the videos like yours does. All mine does is show a screen with a arrow and you click the arrow to show the camera. I don't like that it does that. Can I change mine to be like yours?

[@lm4585]

You go to the clips section at the bottom.

[@glennfriant1817]

thank you@@lm4585

[@thrivinglittles]

❤❤❤

[@jennahaze6835]

Is sync module weather resistant?

[@VSTV1993]

No, that needs to be indoors

[@janetd1980]

Do i need a separate sync module for each camera?

[@libraman7813]

Ok so outdoor hooked and works fine but I cant add my door bill to the syn or do i need another sync

[@bennyylopezz]

batteer life stucks

[@90files90]

Useless

[@critical_analysis]

Very helpful video! It was very crisp and clear. Great job! Thank you...

[@OneHourSmartHome]

You're very welcome!

[@purberri]

The box includes the screw key to open the battery case

[@southernhazpitality]

BEYOND HELPFUL! I had a camera for years I couldn't get to work. This vid was amazing! Thank you! 😊

[@LovelyNelly92]

I bought this not knowing I needed to buy the module separately already too expensive for what it does just stick to ring

[@OneHourSmartHome]

That's a bummer. It's best when you can get a package deal on prime day. Here's the link to the module: amzn.to/3ABlSwH.

[@dilankarun9172]

Interesting that you didn't mention must be on 2.4 wifi. Here's the deal, its simple, with ALL these devices (Not just Blink) that require 2.4 wifi. Go to Phone settings and pick 2.4 wifi. Then start your install/DL App etc. Follow the rest of this video. After you've set everything and working. You can go back to your phone and switch back to 5.2 Wifi. It won't have an impact. I have this issue with everything from Portable A/C's, Camera's, Smart appliances etc etc. It's all the same BS 😛

[@elliottryan13]

2.4 ghz can be jammed with lots of devices. This kinda sucks.

[@jamijohnson1411]

Thank you! Couldn’t have done this without you!

[@maxhogan3561]

So much more clear and useful than the company website. Thank you!

[@tmlizzy]

super helpful. Thank you for the step-by-step.

[@SusanClay-g4l]

Does anyone else not have the camera button on the bottom right hand side? I have a cloud bottom and a microphone button there instead?

[@latashataylor4321]

Thank you! You didn't miss a beat! I'm all set up now! Thanks again!

[@edwarddiaz3616]

Do you have to pay a monthly fee for this service?

[@love_nyc_]

i think yearly

[@kix5284]

Can more than one phone connect to to the ccamera?

[@joannhenry4336]

I never did see how to attach the camera to the mount.

[@clauzone03]

You snap the small piece of plastic into the camera round whole ,over the big metal screw (the one that could be opened with the coin). Then you carefully snap the small circle of the ball mount support into the whole of the small plastic piece. I found an older youtube video showing this.

[@Nigelsyoutube]

Over a year since release and we still don't have it in the UK 🤬

[@kevo60420]

Thanks for a nice, to the point video. Helped greatly.

[@nintendo1978]

Hello thank you for your video. I just bought the battery floodlight and the images don't pop up on my notifications, would you know a fix for that? Thank you

[@OneHourSmartHome]

I have this set up video for the blink outdoor floodlight: kzbin.info/www/bejne/gqG0Xoebj7dslcksi=lxJ699sN6GYLfqWi My recommendation is change the batteries, or remove and reinstall them on the floodlight, make sure the blink 4 has fresh batteries and then remove and reinstall on the app.

[@nintendo1978]

@@OneHourSmartHome thank you for your reply. I contacted blink support and they said this model doesn't come with images .

[@KendraWashington-d1y]

How do talk to someone using this device?

[@danielgiebner9075]

How far can this be out of so fi range?

[@shanegrauer]

It keeps telling me my Wifi password is wrong and it is not wrong, I’ve have the same password for years. I’m returning it tomorrow, Blink is garage and this Wi-Fi issue is a very common one. Not interested in a headache.

[@irritablechef]

It seems like the manufacturer might rely on people like this to actually train for their products.. The directions included suck!

[@beastzeus]

this smart guy bleeps out the important part like someone on the internet is going to war drive down on his SSID's lol I was watching this video to see just that and he bleeped it out hilarious but ty besides that like setup dummy networks for your video if your so worried I'm trying to determine if this 'device' does WPA3 enterprise 802.1x

[@NinjaDom7]

No showing of how to mount or position?

[@carolkyer392]

I need to know how to mount them outside and connect them to my other camers

[@OneHourSmartHome]

Hmmmmmm. I've never had that issue, sounds like it's in set up mode. Maybe remove the batteries and try to connect again?

[@rottimomtwo5477]

Great video but my sync module doesn’t ask to set up camera, creates a new network and keeps telling me in won’t sync. It goes back tomorrow.

[@ytwatcher6020]

Still too slow for a monitoring camera

[@timberskid]

Thank you very informative. I'm just setting up.. Is there a setting to keep camera off except for checking to save battery power? This is to watch our bluebird nestbox. We wanted to mount it inside but we were too late as birds had already started nesting.

[@cecilr7986]

100% Thank you. Your review helped a lot.

[@nr7432]

any idea why i dont have the record and take picture option ? Also the camera times out after 10 to 15 seconds and asks me if i want to continue ?

[@boballison123123]

awesome video, you should work for Blink, your instruction were so much better than the Blink instructions or Blink videos. Thank you!

[@purplepear8505]

Do you have to add each camera separately?

[@doinithard79]

Yes

[@MrThiscalling1]

I can’t connect the module to the WiFi I try everything. What can I do

[@patloftus9928]

I also had a very, very frustrating time. One youtube video producer mentioned a 2.4 modem NOT a 5.0. Blink requires 2.4 as it is broader in reach rather than faster. I have COX cable and a 5.0 modem, when I call their tech department I was told I did not have to return the 5.0 but just go to the top right hand of my computer screen, pull down the tab where the network names are listed for the neighborhood and choose the 2.4 speed net work I had with an earlier modem. I already had a network named for the 5.0 and had to go back and choose a new name for the 2.4. So far I've not been able to delete the first created network name for the door bell so the bell does not yet work. The Blink system won't let me delete the assignment for the door bell and reassign it to the new system. Still waiting for a blink tech to answer email - it's been 6 weeks so I have my doubt I will ever hear from them. I will bug them again once holiday crazy ends. Let me know how you do with my non tech explanation. (I"ll stop offering help if it doesn't work for others...)

[@rottimomtwo5477]

⁠same crap here. It goes back.

[@carolbotts7665]

I forgot my password and had a phone number change, how do I get link to send info via email?

[@IAMLOVI]

Thank you so much for this informative video. Super easy to follow along. Appreciate the help

[@Tktosrs]

Does the module have to be plugged in 24/7???

[@ussenterp65]

What's the range of these cameras and can I use Hotspot instead of wifi

[@psycologo121]

Thank you. We just bought one and it's very helpful

[@hiramlewis3873]

Do you have to buy the Sinc module separately?

[@mojojojo485]

Depends on the item.

[@truthseeqer1154]

It comes with the cameras.

[@Jer-Michael]

So if you have the 5 cameras you have to do this individually for each one?

[@erikalongacre8194]

Any tips on what to do if the QR code doesn’t give anything?

[@purplelove7690]

Super helpful!! Thank you!!

[@jwng279]

Super easy instruction, thank you, 多謝, 謝謝.

[@EdgardoMoreno-du5dz]

Do they work with any type of WiFi Like 2.4 or 5g ?

[@doinithard79]

What are retrigger times... 10 seconds? 60 seconds?

[@teddynall4158]

What do I need to do to set up the second camera that came in the box I bought?

[@steffaniewest6872]

Thank you for the video! Does anyone know why my camera icons do not appear on the screen?

[@joyceclark2181]

I was wondering the same . I bought my products yesterday.

[@chillicsd]

How do you mount them. There are no directions

[@dabrown25]

Great job.. this will help what camera to buy.

[@kuryakin64]

Thank you sir

[@janetd1980]

Do I have to have a subscription for the blink4 outdoor camera's

[@pizann350]

No

[@64lowlife]

Is the device rechargeable

[@lancelemay6971]

I’m using an iPhone with the app. I also loaded the app on the two iPads I use - using the latest software. When you are on the Home Screen and looking at what the camera is seeing there is a camera icon in the lower right. When you tap that camera icon it appears to take a picture. Where does the picture go? It’s not in “clips” or in my Photos anywhere. I only have one camera.

[@ann237]

If you want to save what you’re camera picks up without paying for cloud service. You need to put a memory card in your module.

[@lancelemay6971]

@@ann237 Since I have more than one camera now I figured it out. All the camera button does is update the thumbnail pic representing that particular camera. It was never intended to go to “clips” or to photos.

[@gcbrosgamingcreativebros7416]

Thank you for this.

[@campbellmcfedries1504]

So the sync module comes with the camera?

[@kix5284]

Yes if you buy it that way

[@waltherherrera67]

Excelente adelante y e xitos

[@thrivinglittles]

v v helpful

[@fb1473]

Thanks for the help

[@esmeraldacardoza4231]

Thanks you the video very clear explanation 👍

[@Stan_sprinkle]

I feel like a lot of tech KZbinrs make this extra effort to pronounce "the" clearly as "thee", even though in real life they probably just say it more like "theh" or "thuh". I get that people want to be clear and professional sounding, but it creates this weird and unnatural pause in the speaking cadence. You don't need to do it.

[@seandmoore6922]

Jesus Christ….FFS.

[@Op_Intrude-N313]

Really? You took thee time to type that?

[@danielhova7826]

@@Op_Intrude-N313and then you typed this. I can’t 😂💀

[@Op_Intrude-N313]

@danielhova7826 Clearly, you can. You can do anything you put your mind to if you'd just believe in yourself. You can do it. Keep trying. I have the utmost faith in your ability.

[@edlondon3717]

Gray zones are the areas you don't want detection...you messed up on that

[@vipin_rahul]

I'm getting "device not supported" error when trying to add the cameras. Have deleted the sync module and added it again, tried reset the cameras and different android phones but no luck.

[@houseofdynasty3835]

My wifi not showing on my screen.

[@sonopit]

My goodness, hidden password and wifi, hidden qr code, what do you think we'll steal your pass and qr?? 😂😂

[@Ray-ru3pc]

no but it’s just stupid to voluntarily give those out, and weird for anyone to even question why it’s hidden

[@ryankeever3937]

Exactly @ray. What an odd comment. Unless it’s a bad joke I didn’t get.

[@doinithard79]

Um smart!! Believe it or not hackers... I mean people hack into accounts to steal info or watch footage.. just watch the video🤨

[@chrizchun]

I work IT security, I would definitely recommend not sharing any data at all even if the password is changed and the QR code has already been used. Hackers are good, they study people and find easy info like this and now a hacker is in your camera system.

[@MikeyDano69]

Do we take the white sticker off the inside cover? It looks like it's blocking the sound holes, but then again it might be to weatherproof it? It's the white sticker on the inside back cover.