What Knipex Water Pump Pliers? 88-01-250 / 87-01-250 / 87-22-250

Whats going on everyone!?! Thank you all for tunning in. If you’re new to the channel we take a look at tools every week so if you love tools go ahead and hit that subscribe button. This week we are taking a look at the types of Knipex water pump pliers for the 10" models
that are the key feature for the three models they offer. Links to items are below and anything purchase with the link below helps this channel keep going. As always let me know what you think in the comments below and thank you for watching one tool a week guy.
------------------------------------------------------------------------------------------------------------------------
Mail Box:
One Tool A Week Guy
P.O. Box 692056
San Antonio, TX, 78269
3000 Subscribers Giveaway
Veto Pro Pac Tech Pac Brown
www.amazon.com/gp/product/B00...
TO ENTER:
1) Make sure you are subscribed to my KZbin Channel and Instagram
2) Leave a comment telling me about What Trade your in and State you are from.
Good Luck to everyone, the giveaway runs until we reach 3000 Subscribers On KZbin.
KZbin Community Guidelines: policies.google.com/privacy?h...
*This giveaway is not sponsored or endorsed by KZbin. By commenting and participating in this giveaway, KZbin is released from any and all liability related to this giveaway.
*No data is to be collected from participating in this giveaway
KZbin Privacy Policy: kzbin.infoen-GB/ab...
Music :
DL: www.unroyalty.com/acoustic/bor...
For more country music and acoustic guitar songs that you can use as background music without worry of copyrights, visit UnRoyalty.com.
-------------------------------------------------------------------------------------------------------------------------
MaxiFlex Gloves
www.amazon.com/gp/product/B00...
Knipex Alligator 88-01-250
www.amazon.com/gp/product/B00...
Knipex Cobras 87-01-250
www.amazon.com/gp/product/B00...
Knipex Cobras QuickSet 87-22-250
www.amazon.com/gp/product/B01...
-------------------------------------------------------------------------------------------------------------------------
Camera Gear
Canon EOS R
www.amazon.com/gp/product/B07...
Canon RF 24-105mm F4 L IS USM
www.amazon.com/gp/product/B07...
Manfrotto MHXPRO-3W
www.amazon.com/gp/product/B00...
Peak Design Capture Camera Clip
www.amazon.com/gp/product/B07...
Peak Design Slide Lite Camera Strap SLL-BK-3
www.amazon.com/gp/product/B07...
Viltrox EF--R2
www.amazon.com/gp/product/B08...
-------------------------------------------------------------------------------------------------------------------------
DISCLAIMER: As an Amazon Associates I earn from qualifying purchases
#CommissionEarned

[@Ghst-tl9ec]

Have the first pair of 10" alligators I bought, 25 years ago. They still beat all the other manufacturers.

[@dojifly]

Thank you, I have been shopping for cobra water pump plier, and needed more of an explanation of the differences. Now that I have it I can add another Knipex tool to my tool kit.

[@OneToolAWeekGuy]

That’s what this channel was made for.

[@b-2466]

I have the cobras and alligators and honestly Idk which I love more. They both are amazing!

[@OneToolAWeekGuy]

I know what you mean.

[@mufc99ok]

Knipex are the best you get whst you pay for

[@richiedorado3599]

Great video sir! Keep up the good work! I check out your videos before buying any of my tool!

[@OneToolAWeekGuy]

Thanks for the support Richie 👍

[@garydudgeon]

Just enjoyed this video again and have added several sizes of Cobra pliers since watching the first time.

[@garydudgeon]

Nice video. Although I do love American made and have Channellock tongue and gooove in every size except 480 I have also got several sizes of Knipex Cobras too. I also have a couple pair of Greenlee t and g pliers. Really can not pick a favorite. The Cobras are pretty sweet!

[@E.L.RipleyAtNostromo]

I have a matching pair of Alligators, the 88-01-250 and the 88-01-180. I didn’t even know about the Cobra or the comfort grip option, so am going to have to score one of those! Thanks for the review.

[@OneToolAWeekGuy]

That’s what the channel is here for.

[@boomfuq8277]

Good thorough break down homie I appreciate it, convinced me to go with the alligators i am a union Ironworker and use channel locks a lot so I am more used to that style plus it gets muddy and greasy out in the field so the gators seem more rugged as well

[@johngarza2036]

Tools made in u.s.a, Germany, or Japan is gonna be quality for the most part

[@OneToolAWeekGuy]

Great steel

[@mrniusi11]

not if they are made by American union workers lol

[@svn5994]

@@mrniusi11 Union > Non Union.

[@corygriffiths4394]

Yeah only China sucks at manufacturing tools

[@jasonburrows2938]

Cobras for me daily use for 8 years on this pair... And your the only bloke who pronounces knipex properly....😆👍

[@mrvalhalla6577]

"Nip-ex" is not the proper pronunciation it's "kuh-nip-ex"

[@CesarMartinez-br5qu]

Great video man!! Keep it up I’d like to you use them :)

[@socal_expat1856]

Good video to contrast the differences. I carry standard Cobras. Badass pliers! To me the greatest advantage over the Channelocks I carried for years is. The no pinch feature. Channelock could use a lesson on that.

[@OneToolAWeekGuy]

It dose suck getting pinch with the channellocks lol

[@joebuck4496]

Lol sometimes I crack up thinking about what people 1000 years ago would think about some of our complaints, “Unfortunately you can’t get it back to the first setting with one hand, you have to push a button!!” lol

[@OneToolAWeekGuy]

1st world problems lol

[@josephmartin4673]

@One Tool A Week Guy! New subscriber. Most useful channel I have come across in a while!! Glad I found this channel. Watching all of your old videos. Keep the videos coming!!!!

[@OneToolAWeekGuy]

Thanks for the comment. What trade are you in Joseph. Glad my channel helps

[@josephmartin4673]

@@OneToolAWeekGuy I've worked in Low Slope roofing in the past. Right now not employed in the trades.

[@zanderesp4295]

Between the rubberized and comfort grip for high tension. Which would you recommend?

[@jacobsebastien3910]

Luv my 10" Knipex Alligator Pliers' I pocket carry them Daily at Work" Knipex is the King of Pliers'

[@boothbrave]

Which do you like ? Quick set vs push button? I have the push button and plan to buy another 10” with comfort grips. I can get comfort grips in quick set or push button. It looked like the quick set slipped on you during adjustment. Has me concerned if they will happen one too many times. Saw another review of older discontinued quick set (blue button) where they slipped often during adjustment

[@OneToolAWeekGuy]

love the quick set but if you ask me its the same thing on both.

[@boothbrave]

@@OneToolAWeekGuy I ended up with the push button. Cheaper and I’m already use to that style. Seems you can’t go wrong with either or!

[@waylandjennings4073]

Had a nice set of Alligaters and they were awesome, but the little pivot slug fell out and got lost. Think I'll try a pair of Doyle's this time.

[@OneToolAWeekGuy]

look into doyles. How are you liking them?

[@adamshields6618]

Knipex has a lifetime warranty and I am sure they would warrant something like that .

[@corygriffiths4394]

I’m starting to collect some Knipex pliers I have two right now the 10 inch Alligators and the 7 inch Cobra’s I wanted to get the 7 inch ones to be able to fit in my pocket I had gotten them both from Amazon.

[@OneToolAWeekGuy]

Nice Cory. What trade are you in and state?

[@corygriffiths4394]

@@OneToolAWeekGuy I’m just a DYI and live in Ohio

[@allemander]

6:35 EIGHT POINT EIGHT POUNDS LMAO WOW

[@ramtrucks721]

Yeah..haha

[@MarkJones-no2zf]

I use both most of my tools are klein I do hvac. All but my water pump pliers. Knipex all the way

[@mcdoonaldsmanager8706]

nice video

[@OneToolAWeekGuy]

Thanks for the support

[@FloroBeggins]

7:00 mark for actual differences. YW

[@avernvrey7422]

Alligator is the way to go. Much, much easier to adjust one-handed. More rugged (the push button can pop off the cobras), and the alligator is usually cheaper, often up to $10 cheaper. 180mm or under, I guess the Cobras are of since you're likely working with small stuff, might need more adjustment.

[@logancooper7913]

Germany has been kicking America’s ass with any thing machinery. It’s horrible to use this analogy, but WW2 is an awesome example. The tanks, the weapons, radios, and submarines (u-boats). One of the main reasons why Germany ended up losing the war was because of lack of production and materials. They had everything built with immense quality and precision, just took to much time,money, and not enough materials to produce a massive scale. Sorry I went off of the point of the video, but anything German made is usually of a high quality and never personally let me down.Knipex and H&K weapons are some of the things I really enjoy in life. I also love Klein tools as well. 😂😂😂🤙🤙🤙

[@OneToolAWeekGuy]

love the response and history to it. With you as I love knioex and klein tools. Thanks for sharing your thoughts. This is why this channel was made.Tools and knowledge for the people in the trades.

[@ramtrucks721]

Bro.. Germany LOST. because they over engineered everything... so get off their nutz

[@SuperMIKevin]

is there a 7 inch quickset version?

[@OneToolAWeekGuy]

i think there is only 10 and 12

[@E.L.RipleyAtNostromo]

On the Alligators they make an 88-01-180, a 7”. With their thin profile they’re a useful size.

[@corygriffiths4394]

Are you talking about the 7 inch cobra’s because they make them in that size I’ve got a pair.

[@E.L.RipleyAtNostromo]

@@corygriffiths4394 The 7” Alligators actually are the ones I have. Same profile as the 10” ones

[@lukaskaciasvili9351]

7:05 main purpose of the video starts ;)

[@OneToolAWeekGuy]

Adjustments

[@lukaskaciasvili9351]

@@OneToolAWeekGuy - to explain: I was in the market to get some Cobras, but was super puzzled by quickset function, as I couldn’t find anywhere explaining quickset function or the difference between the ones in the middle and the left ones with quickset function. That’s how I came across your video and was thinking others could also. But first 9 minutes are about attributes that I already knew, so I wanted to point out that most useful part about differences starts after 7 minutes and quickset function (that brought me here) is actually explained at 9:28. Knipex website is sometimes very poor when comes to explaining differences between the tools inside of same line.

[@fuzzman2000]

It's pronounced Kuh-Nip-X (kzbin.info/www/bejne/aoC6pGqXbs-qrZo). You need the blue button Cobra QuickSets to complete your review.

[@OneToolAWeekGuy]

What model is the blue button?

[@fuzzman2000]

@@OneToolAWeekGuy 8721250

[@comepuchas990]

11.11.21 ws c13 hood gls nk guerra

[@melquiadeslemus8115]

Right heeeire! Its Kuh-Nip-X

[@conservativeamerica1]

Nipex??

[@jacobsebastien3910]

German made tools are Quality" Even better than USA made. An I'm from USA

[@bryanrussell6679]

They're tools, made for work. I feel like the people that make these videos think they're tools made for a fashion show.

[@SingleTrack66]

Why are you constantly talking in the future tense ?

[@mcdoonaldsmanager8706]

shut up

[@lacostamontana3019]

How can you talk so much

[@OneToolAWeekGuy]

🤷‍♂️

[@lacostamontana3019]

@@OneToolAWeekGuy 😁

[@miltonhernandez7316]

did the price on the cobra QUICKSET WITH COMFORT GRIP INCREASE? he said $37 and now the lowest price I have seen is $46