#158

Fuel Card:www.rtsinc.com...
Instagram
/ yousiffabdullah .
Want to support my channel?
Shop anything on Amazon using this link. When you open this link, it is set for Under Armour but once you are in the link then search for anything you desire. This is an affiliated link, I will get a small kick out of it and it will not cost you anything! Thank you in advance!
⬇️
www.amazon.com...

[@glcmranger421]

That must have been a rare occurrence to have the shipper apologizing for keeping you waiting. Very respectful, at least. Stay safe. 🏍🇺🇸🎒

[@regtimmins1944]

Hey sir I'm a very small time scraper in Hamilton Ontario Canada I use my mobilty scooter and pull a gorilla cart heavy duty wagon to pull behind my mobilty scooter only thing I like better then collecting and halling the scrap to the scrap yard is watching the Crain's and processing of the scrap and the trucks huling it to and from the scrap yard 😂 I'm on a fixed income so I do scrap to suplimint my income I'm just sharing and appreciate your experiences with the different loads you hall

[@RaoulThomas007]

You should buy some heat shrink butt connectors. Also your stripping tool can be used to crimp your connector and is designed to do so. It all worked though!

[@glcmranger421]

Great advice! He’s always willing to learn, too!

[@anthonyirving6728]

I was wondering why he wasn't using it to crimp the connection

[@ontheroad7097]

Thank you for pointing it out! I actually didn’t know it.

[@davidturk6170]

The red handle tool you used to strip the wire also has a built in crimper section.

[@tommymulliniks9850]

I haul scrap cars a lot and HATE when they use zip ties and when they have excess netting, they just tie it to the rub rail. Makes it a pain to get ready to unload.

[@georgewashington1106]

If you're buying power tools, get a blower too. Beats the hell out of sweeping.

[@azaelramos8213]

Make sure you buy the correct tool. You will need atleast 3/4 drive impact wrench but 1inch drive is preferred.

[@timstafford355]

1 in is the best but the half inch is much lighter and it has been working wonderfull for 4 years for me. Milwaukee

[@ScottByeTX]

Another great video. I wish most drivers were as good 👍🏼

[@mosesgideon1115]

One of those moments when you are picking up from a place that's happy to see you .. a perk of flatbed 😎

[@afgluda]

Salam bro another way to stripe the wire is to light it up and pull

[@RomanVarl]

11:20 You are the healthiest-eating trucker, Yousuf!

[@MS-oz2wu]

Big time. Very surprised. Food can kill. Few know this, kidneys, heart, etc.

[@tonynimmons111]

All in scrap cars can damage your trailer and put stains on it that you can’t get out. Hopefully the rate is worth it.

[@beesa1010]

👍🏻👍🏻👍🏻

[@MS-oz2wu]

Did the shipper put the chains over the cars and ratchet them down as well? How much dunnage, 4x4s did you use? Do the cars leak oil on your trailer and cut up the floor. Thanks for the vid.

[@franciscosandiego3026]

What is up brother from the imperial county California 👍👍🖐️🇺🇲🇺🇲

[@lknanml]

Get yourself a soldering kit. It will take less time to fix and the connection will outlast the parts lol. Soldering is WAY EASIER than people think...

[@AJ-nj3bt]

Fantastic as always

[@evanoliver44]

Good morning brother Aed Mubarak I was waiting u for the long time no videos from u ❤

[@jackmahle8680]

check your brake chamber rod stroke too make sure they are all the same stroke lenght..brakes shoes will last longer...But never take a brake chamber apart..✌😇

[@raykrv6a]

I picked up a Milwaukee battery powered impact gun and it's awesome You should have both the impact and battery powered grease gun. I would still price out the shops for doing the brakes due to downtime and losing revenue.

[@2phalanges]

How did u throw the chains over the cars?

[@mohammedj9179]

👍

[@terrygreg1988]

,,2 👍👍 up bro stay safe out there 🤞🥾🇺🇸

[@RaPiDxReCkZ]

How do you deal with the cravings of food and snacks, with only one meal a day? Keep up the cool vids bro👍🏻

[@alanlanghorn9528]

Those old cars just drop bits everywhere as you go down the road use do them small bit that were not crushed fall off bit of a worry at times .

[@voodoo7183]

what size and length of chains did you have? and how many did you end up using?

[@ontheroad7097]

I have 20ft long 3/8. I used 9 chains on the load and 5 more chains as an extension. Total 14 chains and 9 binders

[@raymundocampos5988]

If you haul scrap cars I think freight is sheap

[@timstafford355]

I see you have three tool boxes on trailer what is your max weight? Mine is 46, 500. Because of spare tires Etc

[@kingstanyarg7691]

Just remember you can't do everything yourself working on the truck plus drive it somethings you afto let the professionals deal with like the heavy duty stuff but I like your attitude towards doing stuff yourself

[@anthonyirving6728]

Get yourself a crimping tool to make better connections

[@mrc1539]

Hauled crushed cars for over 30 years and never used a chain or binder , strictly cables and winches ! Your chains probably cost more than the load paid . 😢

[@donttruckhere]

we haul crushed cars for 4 a mile

[@larrythompson8630]

Yep things under Biden are 2x as much as under Trump. I wish I had bought more. I bought 2 grade 70 chains @$50 20’ 1/2”. I hate yards with junk everywhere. A flat tire is in your future. At 8:15 you have the correct crimping tool to crimp the blue connector. (I think) it’s even color coded. A needle nose will do a poor crimping job. But if all you have.

[@dronetrucker]

Crushed cars are the gas station hot dog of freight, you DNT want to eat it, but you are hungry.

[@donttruckhere]

crushed cars PAY

[@bryonsusedautos]

So since you bought that semi for the $50k how much has it made you so far?

[@stevenmcelwain2711]

you crimp the blue things with the front of your red color pliers

[@newworld9206]

What year is your trailer?.. do you recommend a 2015 trailer?

[@ontheroad7097]

Mine is 2013. 2015 is fine also. Just make sure the trailer has a solid frame/no cracks

[@newworld9206]

@@ontheroad7097 thanks a lot

[@areenakju]

Gm.Uousif

[@mikezunker]

I do appreciate you... But this is a tutorial please avoid that distractions.

[@teamdada2194]

Desperate times call for desperate measures. You’ll get a peice of metal in your tires eventually.

[@robinsonsaintflina2327]

What’s the length of your chins

[@hoists1829]

Awesome video 👍👍How could we contact with you? Thank you.

[@olivergastelumjr3755]

Your mom charged me 5.7 % to pipe R down 😅

[@lutherblacklockgolfcom]

Wow what a load of rubbish I bet your glad you don't do this every day :)

[@davidturk6170]

11:32 - handy accessory for the grease gun is a tip with a lever that lets you clip on and off of the zerk fitting. Makes it much easier since you’re not having to hold the nozzle against the fitting. This one, but there are other brands; www.amazon.com/LockNLube-fittings-best-selling-Long-lasting-rebuildable/dp/B00H7LPKKU/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.570e7680-987b-4043-baad-ab61ea81d6c9%3Aamzn1.sym.570e7680-987b-4043-baad-ab61ea81d6c9&cv_ct_cx=Grease+gun+nozzle&keywords=Grease+gun+nozzle&pd_rd_i=B00H7LPKKU&pd_rd_r=1c19b849-0af2-44e6-89b6-4ec6c92c5273&pd_rd_w=LLJbE&pd_rd_wg=o2mqu&pf_rd_p=570e7680-987b-4043-baad-ab61ea81d6c9&pf_rd_r=GRYNBD4MYC91R5W3P5GX&qid=1682111428&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=1-1-a73d1c8c-2fd2-4f19-aa41-2df022bcb241-spons&psc=1&smid=A3UPOD5O08GT8E&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEySlhFNzlDRlM5RFFIJmVuY3J5cHRlZElkPUEwNjU3MDA1M0JQOEZDQjFaR0RBNCZlbmNyeXB0ZWRBZElkPUEwNDM5NjgzUURMRkRVWkJFOTFUJndpZGdldE5hbWU9c3Bfc2VhcmNoX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==.