OPEN FLUE SYSTEM acs revision in less than 10 minutes on open flue boilers and fires flue system.

[@flopnessmonster5114]

Thanks Dezza, these quick revision videos are just what I need! Got my ACS in 4 weeks

[@mobou6298]

Thanks a lot and cannot thank u enough but without ur trainings I don’t know how I would have passed my acs exams!!!! Today I v done my theory and I passed thanks to u from London!!!!!!

[@tomkatgastraining]

Congratulations

[@rammingspeed5217]

@@tomkatgastraining hahaha.. Ma Man!

[@fredthesavannahcat2899]

This is exactly why I subscribed. It's clear, informative and precise. I have to pay kudos to the improved production values of your new videos. Finally, no faffing about. I like it.

[@peterreid4567]

Enjoy all your videos. If only people realised how much gas safe engineer has to know. In reality I bet most engineers only use about 20% of what they are required to know.

[@TomPalacki]

Great channel and videos, Got my acs reseat coming Thursday - very useful. Basically most bullet points covered in all vids uploaded over last few months👍 thanks Derek

[@MrWayno79x]

Once again, hats off to you for your very clear and straight to the point video. Thanks

[@AlSash-y4b]

Great, fantastic, everything about open flues in less than 10 min.

[@martynlewis5901]

Excellent, really appreciate your work on these, got my ACS next year so just watching these now when I can. When I first started working in gas every other job was open flued, now they are few and far between.

[@Wordmeister]

Got my gas resits in 6 weeks. Just watching this video reminds me how stressful it’s going to be... 🤯🤯🤯

[@hdhanji8006]

Excellent vid, not easy by any means to cram all the detail in under 10 mins 👍

[@adamandmichelle59]

Great video. It’s good to recap on areas that you may not come across often

[@mindspirit179]

Very Knowledgeable. More ten minute video's please.

[@Bradwellify]

Thanks Derek. Thomas Bradwell

[@mj0n4id36]

Brilliant. Straight to the point. Found this very useful especially with my initial acs around the corner. Thanks Derek 👍🏻 Asian Jon. Training.

[@farukadam1696]

I have reassessment on 3 weeks time it's very helpful Regards Faruk

[@len5509]

Brilliant helps us all to keep up to date and refreshes Thanks.

[@AnEyeScream]

Thank you, Nikola

[@AlSash-y4b]

Excellent, valuable information just in 10 min.

[@smellslikethinice1107]

Thank you indeed for the recap.

[@andrewthomas332]

another well presented video thank you Derek

[@willlomas2725]

Nice one Derek.

[@cryptoconnect9546]

Thank you Thomas, found it very helpful. You get straight to the point!

[@lmcm7311]

Great videos as always Derek 👍🏻

[@cidosales9513]

Thank you Derek

[@mohammednazir8307]

Brilliant video Derek. Thank you 😊

[@piotrmarchwacki3414]

Excellent explanation. Thanks Derek 👍😀.

[@fastusbombastus2085]

Great job! ACS assessment tomorrow!!!

[@tomkatgastraining]

Good luck

[@davexjs5889]

An Excellent Tutor Thanks Again.

[@redaalem1854]

Great Chanel teacher 🎉

[@mohammednadeem7274]

Amazing video Derek, really Good information provided through your training videos..👍👍😀😀

[@shanehunt8360]

Great video 👍 Shane Hunt

[@chrisjones4500]

Thanks Derek..

[@alialfayadh6765]

Another great video thank you it's a massive help for me

[@muhammadAli-kd2zp]

Thank you please keep them coming

[@Achieving24]

thank you derek mate 👍🏻i found this clip very helpful topman

[@marianbalaz9397]

AGA has gas cooker open flue GC3 . Very good video. Thanks.

[@tomkatgastraining]

The boiler part is flued but the hob is still flueless

[@harryjones7298]

​@@tomkatgastrainingnot true , agas are cookers with open flues, nothing to do with the boiler witch you can have in them

[@jugbirsingh6999]

Thanks bro got my summative tomorrow. Just the information I needed

[@tomkatgastraining]

Good luck with your exams 👍🏻

[@hydrotherm1]

Absolute genius!

[@rayhurrell1722]

THANKS DEREK GREAT VIDEO

[@charliefox6987]

Great video thank you , very helpful for revision

[@javediqbal1343]

Great video, could u plz make 10 minutes videos on all other areas of acs assessment plz . Thanks

[@jasongittoes7299]

Many thanks nice clear easy video to follow

[@rivkiroyde4362]

Thanks Derek great video 🙏👍

[@Perfectorism]

Great work👍

[@helenreilly7629]

Top man! excellent video

[@saltnvinni1]

Fantastic video!

[@suheilhanna873]

Great one

[@PriscillaGordon-m8k]

Great video ✔️

[@therworld6875]

very informative in less than 10 mins , great for revision. can u do pipe sizing aswell in 10 mins please thanks

[@tomkatgastraining]

Yep will do 👍🏻

[@AhmedAhmed-zj4zd]

Thx Derek for this useful vedeo

[@mortezakhesarat5364]

great stuff

[@manjsingh6500]

Thanks. Fantastic

[@hatemmimouni7015]

Thank you again this is great video

[@hafizimran6021]

Really helpful 👍

[@jsadler5178]

Very helpful thanks very much!

[@vladimirstafasani4630]

Great video

[@lostinthoughtscalminsilenc8167]

What would happen if the bp was too high or low?

[@hatemmimouni7015]

Thank you

[@piotrserafin9728]

Brilliant video as always, any chance you could do some fault finding ones ?

[@tomkatgastraining]

It’s on the list to do 👍🏻

[@Skeletoncrew46and2]

More of those pls!

[@monikanader9454]

Great video 👍😊👍

[@CaliforniaLloydUK]

Thankyou

[@kasimrehman2918]

Hi could you do a video like this for room sealed boilers.

[@tomkatgastraining]

It’s in production 👍🏻

[@suewarrington8155]

👍 Sue Warrington

[@antoniogalluccio4213]

We can add that if yhe flue is made of bricks instead of 45⁰ elboews we can have 30⁰ maximum, is that right?

[@tomkatgastraining]

Not sure what you are asking but pre cast and brick chimneys have a maximum angle of 30 degrees and steel flue is 45 for open flue and you can have 90 on fan flue

[@lostinthoughtscalminsilenc8167]

Can normal open flue chim have a flue linear then? Or is it just back boiler? Thanks

[@tomkatgastraining]

You can install a flue liner in a class 1 chimney if the chimney fails a flue flow test

[@thomasblades4059]

Top video 😀😀

[@charliefox6987]

Hi dezza are there any decent ACS revision packs worth buying ? I got mine in 3 weeks and I’m going core case folder which I learned from during my 6 weeks in centre. Any other recommendations?? Do you advise doing mock exams ?

[@tomkatgastraining]

Just keep watching my ACS revision exam videos and make sure you understand ventilation, pipe sizing calculations and purge volume. The rest you will find in your training manual and the standards.

[@charliefox6987]

@@tomkatgastraining thanks mate !👌

[@charliefox6987]

@@tomkatgastraining is the written exam very difficult?

[@tomkatgastraining]

@@charliefox6987 only if you have not prepared well

[@charliefox6987]

@@tomkatgastraining I feel like I’ve done enough in terms of reading over my book and doing mock test but not sure how to prepare for a written exam.. fingers crossed 🤞🏻

[@dimitriskatsiaounis1290]

Useful

[@aliebrahimi974]

👍👍👌👌

[@mobou6298]

U are my HER😉, 👍!!!!

[@jamalamin082]

👌🏽

[@CARTERBRFC1]

👍

[@carsonwilliams6319]

✅👍🏻

[@viran8121]

👍🏽

[@M20DAN]

Tomkat👍🏻

[@cerealkiller4248]

I shut off a boiler week before last for a 90 degree bend on a natural drought open flue’d boiler. They’re still out there guys....................

[@craighurst3599]

CH👍

[@SuperWayneyb]

👍🤓👍

[@marvindallen8916]

,👍🏾

[@jon-paulward4580]

Jon-Paul Ward

[@matthewburns2870]

Matthew burns

[@darrenjervis3174]

Darren Tomkat training

[@danielcarragher6628]

Daniel carragher

[@WeShowMemes537]

Got so many answers which forgot

[@marcinmasalski4183]

Marcin Masalski

[@warmastermoran6418]

Jd training

[@harryjones7298]

Video is misleading as you can most definitely have cookers with open flues , they are not all flueless

[@erfanalshawa9070]

thank you

[@dvsnbanda]

Great video

[@samchappell233]

Great video 👍👍

[@chrisjones4500]

👍👍

[@marcinmasalski4183]

Marcin Masalski

[@mervinpermalloo8589]

🙏😊