OpenWRT - Install & Configure USB to Ethernet Adapter - Raspberry Pi

[@ansientwun]

Van, most straight forward explanation I've seen on this topic. It covered all of the necessary components to get this up. Thanks for making my day!😀

[@mantacid1221]

Holy crap this tutorial is a lifesaver. Due to the chip shortage, i have been unable to get a hold of a Rpi4, and have been prototyping with an old Rpi2. I had lost my only working keyboard dongle. This tutorial will help me greatly in creating a custom privacy-oriented router. Thank you for your service.

[@SMCon117]

Very nice, got OpenWRT up on my own but couldn't find the drivers for my USB NIC and this was the final piece of the puzzle. Thanks!

[@VanTechCorner]

Glad it helped!

[@cjejuni]

Even being a newbie electronics hobbyist, i understood it. a big thank you.

[@pantuflip]

Thank you, very good tutorial, and the more important I was looking how to add a ethernet port in my Raspberry pi and this work very good.

[@VanTechCorner]

Glad it helped!

[@joshjohnson946]

i am having a bit of trouble, everything is working great until about 16:19 when i go to make RPi4 the main router. the countdown on my screen begins and just goes all the way down until it says failover. maybe i am a bit confused on where the wires go. at that point i can just move my RPi4 into the position my old router was right? have a cable going from modem to RPi4 and then usb to ethernet cable going to computer for connectivity, right?

[@Starcom70]

Great video, thank you. The only thing was that my USB Network Adapter did not work with the driver and I had to go find the driver for my device.

[@hariskar_]

Thank you for tutorial! When I connect Raspberry with new IP to my router and ping get no response. Any idea why?

[@limseehong]

Thanks. What I have been waiting for. Will need to get the Dlink DUB-1312 dongle.

[@VanTechCorner]

Yup, this model should be popular in Malaysia. Mine is a second hand item from Carousell.

[@TimoBirnschein]

Great tutorials! Following a bunch o them to get to a tethered, double WAN, load balancing, USB Ethernet using router setup.

[@VanTechCorner]

Glad that you like it. Stay tuned as more videos come in the future. Thank you for the support!

[@59poppN]

This is what I needed thank you keep em coming!!!!

[@VanTechCorner]

Thank you! More to come!

[@notmynameX]

Hi Van Tech I have a question... I'm stuck getting this to work. If I'm plugging in from usb adapter (eth1) to an unmanaged switch do I still do exactly like you do in the video or do I make eth1 a DHCP server? I have to also make the 'modem' interface to bridge my modem/router from isp

[@sergeykamenetskiy8187]

What chipset in that DUB-1312 adapter? I am having issues with tp-link UE300 (Realtek chipset) and Openwrt 23.5.05. Using the drivers provided by OpenWrt.

[@ebrambadpa]

How to use mikrotik hap lit le instead of tplinl switch please help

[@GentleUwU]

Every time I get to 15:28 and configure then save the LAN interface changes, my PC never recognizes the ethernet connection. Stuck on "identifying" and then the changes get reverted because of the fail safe timer. Have any ideas on why this is happening/what I can do? Everything until then works perfectly

[@VanTechCorner]

You will need to connect the network cable from the PC to the Pi's LAN port, and then open the LuCI page to confirm the change. This should be done fast, or else the change will be reverted.

[@JeepXj-xt1yv]

It's not success for me, my STB Rockchip was install for USB Hilink modem, and i follow u'r step to get USB-Ethernet but the device still missing, a'm i miss something ?

[@andygonzalez7012]

Hello i am trying to do something slightly different. I want to use my Pi for a travel router. The built in wifi will face the public internet and the 2nd wifi adapter will give me private IP. If I get trhis working then i will do a VPNclient also. The problem I am having is that the adapter I chose isn't recognized by the PI. I can't find the openwrt drivers. I do not know PI so I am learning along the way. The adapter is the Techkey AC1200 a Realtek chipset. The webpage says it is a 8812bu chipset. Would you know the drivers i need to load to make this work.

[@blakebrickey5044]

If I am wanting to set up a home VPN, would this configuration work without the need of a computer to host the VPN? Or would I still need a computer or CPU to host the VPN?

[@ismailelayachi9337]

Very Interesting. I followed all the steps and it's working fine. Thank you my friend.

[@VanTechCorner]

Glad it helped. You can also check out other OpenWRT tutorials in this playlist - kzbin.info/aero/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC

[@rekabffej]

Amazing video! Helped me get up and running! Thank you!

[@VanTechCorner]

Thanks for the comment. Feel fee to check out my OpenWRT tutorial playlist if you are interested kzbin.info/aero/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC

[@plica06]

Good stuff Van. Which is the better way to configure a Pi 4 as an OpenWrt router... using a USB/Ethernet adapter to make the second network interface or using vlan to get two network interfaces on the Pi 4? Will vlan give a slower or faster network speed than using the ethernet adapter?

[@VanTechCorner]

Hi, thanks for the comment. I personally prefer using a USB to Ethernet adapter because we have 2 different physical network interfaces. 1 or 2 VLANs will not really slow down the network but more will do. At the same time, there can be security issues if you don't setup the the VLAN/ firewall properly since your switch is directly connected to the internet, etc.

[@riyaz1983]

Hello Van. I was able to get this working and all my home devices are able to reach the internet via the raspberry pi 4 as a router and firewall between my ISP and home network. I would like to explore more options on how to create VLANs to segregate my network into three parts which is Guest, IoT and the default LAN. I have seen many tutorials and community help but unable to get some answers in which RPi4B is involved which does not have a switch built in and LAN is via a single port. My question is, via this single LAN port how can I achieve my requirement of different networks. Played around with VLANs but still unable to get it working. I am new to openwrt on a RPi4B, so please help me. I have basic network knowledge. Thank you in advance.

[@varinaboy19]

could this handle a 1gig connection

[@jameschu9729]

Great video. Do you have a video setting up the WAN interface? In this video you only created a WAN interface but never showed how to set it up. thanks

[@VanTechCorner]

Yes there are, you can find all sort of interface setup in this playlist kzbin.info/aero/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC

[@mohdhadzir5449]

Can you make tutorial raspberry pi 3 B passwall?

[@manc4806]

Another nice vid ! Would you say that this DLINK usb to ethernet adapter is better than others? I read lots of negative opinions on usb to adapter hence the question. Thanks.

[@VanTechCorner]

It is advised use ethernet card powered by Intel chipset when you are using Linux /pfSense and Qualcomm Atheros for OpenWRT. There are issues with performance with other chipsets and people don't like them, especially Linux and pfSense users. I got the same problem with a Realtek network port. When I found this D Link USB 2 Ethernet adapter, it was a second hand unit and it supper cheap, so I bough it for some tests. It turn out that this DUB-1312 works well with Windows, MacOS, Synology and now OpenWRT. I got the speed of ~ 900 Mbps when downloading the file from the NAS to the computer with this adapter. So yeah, if you have a good budget, go with the good devices. Else, plan around with second hand stuff like me and have fun :D

[@ngthensiong]

Where can I get the DUMP SWITCH? It's an extension of the LAN port for the router, right?

[@VanTechCorner]

Hi, a normal switch (not a smart switch / vlan /managed switch) is called a dump switch (since it is only used for switching. Example the TP-Link TL-SG105, TL-SG108, Netgear GS305, etc.

[@ngthensiong]

@Van Tech Corner Let’s say if I want an extension on my asus router for the port, is it possible to do so?

[@VanTechCorner]

I am not sure if you are using stock firmware. If the device is running OpenWRT, you can configure that.

[@ngthensiong]

@Van Tech Corner noted with thanks. BTW, do you mind give a tutorial on how to revert back the original gl.inet firmware of gl-ax1800 flint on the Aircove router?

[@iamrage4753]

great video! what about adding an access point if that is also running openwrt also, what is the setup and config? thankyou

[@VanTechCorner]

Do you mean add a USB Wireless Adapter to the Pi, or install OpenWRT on an access point? (Not all access points are supported by OpenWRT)

[@iamrage4753]

@@VanTechCorner i meant an actual access point i have a nanohd running openwrt

[@TheMagenatto]

Excellent video my friend, could you tell me if I could use the same way for other cards with only 1 LAN connection? Example : NanoPI, BananaPi and others compatible with OpenWRT!

[@wowado]

Hi, great videos. I would like to ask what is the starting edit of dhcp and network configuration before connecting RPi to router? I have my router running DHCP and won't accept RPi with static IP setting as you have it in the video. How do I configure RPi to get its IP from DHCP router? Thank you.

[@wowado]

Nevermind, I somehow made it work.

[@JFinns]

Is the USB 3.0 gigabit ethernet required for WAN or can the modem and Pi4 router both plug into ports on a switch and be configured that way. It would be like the router on a stick topology.

[@VanTechCorner]

Hi, you can get this done in both ways: - Use a USB to Ethernet adapter as WAN interface (this video) - Connect the RPI to a managed / VLAN supported switch (kzbin.info/www/bejne/sICwo2mNmZyYb9E)

[@limseehong]

which usb3 to ethernet adapter is best for use in RPI and Hackintosh? my RPI is 4B and my Hack is running Catalina.

[@VanTechCorner]

When it comes to USB ethernet adapter, I think any brand will work just fine: TP-Link, D-Link, Dell, Totolink, etc. All of them should work fine.

[@limseehong]

My installation of Luci OpenWrt 19.07 was done till the WAN stage. But after I bind the WAN to eth0, I couldn't access the RPI4 anymore not even through Wifi.

[@VanTechCorner]

Hi, I didn't bind WAN to eth0. We only change the LAN IP of the interface. Can you show me the the time in the video that you are talking about?

[@limseehong]

@@VanTechCorner 14:38

[@VanTechCorner]

@@limseehong At that time I created the WAN interface from **eth1** (the new interface for USB to Ethernet port), not eth0.

[@limseehong]

@@VanTechCorner I use eth0 bcos I don't have usb2eth adaptor

[@VanTechCorner]

I am not really get your point. Can you tell me what setup you want to do with the Raspberry Pi 4? Are you trying to setup the Pi 4 as an Access Point? Normally you won't be able to access the OpenWRT router from WAN. For example, if you RPI4 WAN connected to Netgear LAN port then the Dell PC from the Netgear won't be able to access to the RPI4 via Luci, but you can only ping. Please provide more info so that we can discuss this further!

[@dktol56]

Very nice tutorials! Well done. How about replacing the USB-to-ethernet adapter with a USB-tethered cell phone? Great for emergency situations where your internet provider goes down. Shouldn't be hard, but I'm not sure what kmod packages would be required for openwrt.

[@VanTechCorner]

Hey, thanks for the comment. Your question is answered here kzbin.info/www/bejne/aIjIlpethK6SrK8. Also, we have different OpenWRT tutorials on the channel, feel free to check it out kzbin.info/aero/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC

[@CrossLegacyOfficial]

Can I use 2 usb Ethernet adapters to set up 2 lan outputs?

[@VanTechCorner]

Yes, you can surely do that. Even plug the Gigabit Ethernet adapter to the USB 2.0 port (but the linkspeed is lower).

[@cincaila]

Why my software only got 98MB++? My SD card got 16 GB

[@VanTechCorner]

In the default partition layout (of OpenWRT), /dev/sda2 is a 256MB. You will need to extend this partition to fully use the whole free space. See openwrt.org/docs/guide-user/installation/openwrt_x86#resizing_partitions for more information

[@cincaila]

@@VanTechCorner thank you

[@limseehong]

Just ordered my Dlink 1312 USB-Ethernet device. Will redo according to your instructions when it arrived. Should I buy a managed or unmanaged switch? Do I need VLAN? and if I don't need, an unmanaged should do?

[@VanTechCorner]

If you are using the USB to Ethernet adapter to setup WAN, there is no need to use VLAN (since we are not running all service on the same port). However, you will need a switch if you want to extend your network. Any switch will do, just connect it to your LAN port on the Raspberry Pi.

[@limseehong]

@@VanTechCorner at present, my Huawei B618 LTE WAN port is connected to my Asus AC1200G+ WAN port. So the Raspberry OpenWrt WAN port (eth1_Dlink1312) connects to the Asus LAN port. Then I I connect my laptop to the Raspberry LAN. What is the difference if I just connect the laptop to the LAN ports of the Asus? The traffic won't pass through the OpenWrt (RPI)? And if it doesn't pass through then I must get a switch to connect the RPI LAN to the switch and connect all other LAN devices via the switch? Is that right?

[@robertoinciso2567]

Van great video.... exactly what i need for my personal project. Is there a file wherein all your codes are to be copied? except of course to ip addresses which i will fill up. Newbie here in openwrt. One last question - can we install zerotier in this openwrt router on rpi4b?

[@VanTechCorner]

Hi Roberto, for this tutorial - nope. For other videos I do have the link the the script from Openwrt official guide. And yes, you can install zerotier on OpenWRT router. openwrt.org/packages/pkgdata/zerotier

[@shubhamkulkarni2147]

Hi Van Tech Corner i really need your help, what you did in this video is just shared your internet through the USB to LAN adapter to LAN same way i wanna share my internet through USB thethering of mobile to LAN of the raspberry pi and want to create two WANS and make it failover please help me this Work From home is shit......

[@VanTechCorner]

Hi, if you are new to OpenWRT, you are creating a big math to solve. Are you trying to setup 2 WANs connection with the USB tethering method? Follow this tutorial, you should be able to configure this. For failover, you can see my tutorial for multiwan failover video and it should get the job done.

[@clonetrooper5674]

Hi. love the tutorials. are you able to do one on how to install and run docker on the pi? E.g. smokeping or wifi controller container on raspberry pi 4 running openwrt? cheers

[@brodyroe7854]

What’s is your internet speed? I’m thinking about using a raspberry pi to run qos on my network. We are upgrading to fiber so we will get 1000 up and down. Will the raspberry pi bottleneck the network or would it possibly be a better option just to leave all of the qos work on the router itself?

[@VanTechCorner]

I have tested the WAN to LAN throughput with this USB 3.0 ethernet and the onboard port, the throughput is at ~ 920 Mbps. If you want to run 1 Gbps fiber link, I think you will need better router to do the job.

[@ianjrgensen1824]

Great video! Is there any limit to how many ports the dumb switch could have? Do you think the pi could support 24 ports? With low Mbs speeds?

[@VanTechCorner]

Hi, sorry for the late response. When it comes to LAN to LAN traffic, it will be handled by the switch so there is no limit on the number of the ports. However, when it come to internet traffic, it will be routed to the network port on the Raspberry Pi with tested by me capped at ~ 930 Mbps. So if your internet traffic is not that high, or around 400 Mbps, this PRI can work well.

[@lakshanthadissanayake6735]

Hi, I have installed the latest OpenWrt firmware on a Raspberry Pi 4, and now I am struggling to configure the network settings. Connecting the Pi directly to PC via Ethernet, it says "no network access" and I am unable to ping 192.168.1.1 Please help

[@VanTechCorner]

Hi, did your PC received an IP from the Pi DHCP server? If not, verify that the PC's NIC is in DHCP mode and try to replug the cable and see if it helps. Else, most likely that something wrong with the Pi / the firmware is not properly written to the SD card. We may need monitor or TTL connection to troubleshoot it further.

[@lakshanthadissanayake6735]

@@VanTechCorner Thank you. Now it works.

[@MehmetKollayan]

Thanks, good job. We expect more

[@VanTechCorner]

Thanks! More to come!

[@VietnamShorts]

Great tutorial. Thank you.

[@VanTechCorner]

Glad it was helpful!

[@ეროვნებითქართველი]

Can I use built-in wifi instead of the second Ethernet adapter?

[@VanTechCorner]

Yeah why not? However, the wifi link speed is only 150 Mbps on AC 5 Ghz and the signal is not strong.

[@ეროვნებითქართველი]

@@VanTechCorner It's okay. I followed your instructions but chose wifi adapter instead of ethernet but after saving it says following: "Error: Network device is not present". Should I do something differently?

[@VanTechCorner]

I am not really understand you now. What are you doing with the router? If you want to set it up as AP client, do it in the wireless section instead.

[@VanTechCorner]

For further question, please join the FB group "Van Tech Corner & Friends" and we will discuss further!

[@ეროვნებითქართველი]

@@VanTechCorner Thanks!

[@mohdzulhazmi5357]

Possible to use vlan(621) for my fiber connection?

[@VanTechCorner]

Please see the OpenWRT PPPoE VLAN video on the channel, it is possible to do and I have done it before.

[@mohdzulhazmi5357]

@@VanTechCorner thank you!. This same tutorial can also can be use to add usb lan to mini pc usb3 running x86 openwrt?

[@VanTechCorner]

For VLAN configuration - yes, you just need to create the VLAN interface and the status will be tagged by default (no way to change it).

[@mohdzulhazmi5357]

@@VanTechCorner ok noted on vlan. How about the usb lan adaptor? Is it applicable only to raspberry? Or is it can be used in other x86 route? Ie mini pc etc..thanks

[@VanTechCorner]

It apply for all, as long as you are using the USB 3.0 interface.

[@arepiet69]

Please make a new project .New Beelink gk mini only has single lan port . Make it use openwrt as a router and usb to ethernet as a Lan/Wan . I need your tutorial . Thank you sifu

[@VanTechCorner]

Hi, there were some tutorial for single port network setup, including Raspberry Pi and x86 computer. You can go to the channel page and find them on the OpenWRT Tutorial playlist.

[@aikeerizada4145]

Hi good day, this is compatible also in orange pi one?

[@VanTechCorner]

Hi, if you already have OpenWRT running on the OrangePi then you can follow this tutorial and it should work. Else, you will need to find a way to install OpenWRT on the device (not all OrangePI can be installed OpenWRT).

[@aikeerizada4145]

Thank you so much for the information...

[@NgocPham-vg7fw]

Hi, nhờ AD hỗ trợ mình với, sau khi cài gói kmod-usb-net-asix-ax88179 thì mình add interface không được nhỉ, port không nhận.

[@VanTechCorner]

Bạn có thể cung cấp log của lsbusb không? Mặc dù đại đa số thiết bị USB 3.0 Ethernet Adapter sử dụng chip ax88179 , một số sử dụng chip khác và cần cài driver tương thích thì mới dùng được.

[@NgocPham-vg7fw]

@@VanTechCorner mình dùng loại usb-enthenet có thương hiệu thì đã nhận port, loại rẻ tiền thì sẽ ko nhận. Còn 1 issue nữa là sau khi create đc lan 1, eth1 rồi, mình thử add địa chỉ IP như port lan0 nhưng ping từ PC đến ko thấy được.

[@thoainguyen9419]

Hi Van, sound like you are VietNamese. Could you tell me where to get this raspberry case in VietNam. I am really enjoy your videos, keep it going.

[@VanTechCorner]

Hi, yes I am. I purchased the item from Malaysia Shopee so I don't if you can find it in Vietnam. But just search for dual fan Raspberry Pi case, maybe you will find one.

[@eledikohabib3369]

Hi DongVan...can you make a proper setup video for 4G LTE USB dongle with raspberry pi for OpenWrt?🙏😥

[@VanTechCorner]

Hello, there are 2 videos - USB tethering and LTE modem setup, you can find the videos in this playlist. kzbin.info/aero/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC Btw, may I know the model of the USB modem that you are using?

[@struggle375]

Thanks!

[@davidwu0709]

thanks, this is help me a lot.

[@VanTechCorner]

Glad it helped!

[@AbdulLatif-pe2jf]

Thast internet speed so crazy.!! Are you use fiber optic.? Or 4G LTE internet.?

[@VanTechCorner]

Yup, I am using fiber optic. The Pi 4 has true gigabit ethernet and the USB 3.0 so I expect that they could handle at least 800 Mbps. Sad that I don't have that fast internet connection to test.

[@AbdulLatif-pe2jf]

@@VanTechCorner so you use 1Gbps of fiber optic connections.?

[@VanTechCorner]

No, I am using the 200 Mbps plan and normally the speedtest result will be a little bit higher.

[@AbdulLatif-pe2jf]

@@VanTechCorner thats dedicated connection 1:1 great.! How much for a month.?

[@VanTechCorner]

I moved to VN and the price is cheaper here. This is just normal fiber connection, not leased line. The price is around 70 MYR, comes with a dualband GPON routers with 2 nodes of mesh wifi.

[@chuc2rk]

please share link buy usb to ethernet

[@VanTechCorner]

Hi, the item was purchased when I was in Malaysia. You can search it on Google, the model is "Dlink DUB-1312"

[@PHPTutorsPT]

Nice vice ! Can you do a test with OpenVPN client on the Raspberry Pi, to see if it supports a good bandwidth?

[@VanTechCorner]

Sure. I will do a Wireguard & OpenVPN test with this Raspberry Pi. Stay tuned!

[@rie_55]

Cool💐💐💐💐

[@VanTechCorner]

Thank you!

[@ncsmusic8599]

Đo speedtest của viettel mà nói toàn tiếng anh vậy.

[@anhphuc3934]

Hi bro, bro living in vietnam?

[@VanTechCorner]

Hi, yes I am.

[@marianofevola5261]

why putty ask me a ID and PASSWORD ? i don put anyting