Operating Instructions for Eperver WIFI 2.4G RJ45 D

Operating Instructions for Eperver WIFI 2.4G RJ45 D.
APP Software
· iPhone
APP Store--Solar Guardian
drive.google.c...
· Android phone
drive.google.c...
Item:www.ebay.com/i...
Amazon:amazon.com/sol...
Our store:solarepic.com/

[@bimmers323ci]

i love this---it connected to my pt-adp-port which is monitoring 3 epever tracer 10420an controller and it works great.....[ way to go]

[@alexcats5298]

I have just downloaded the APP Solar Guardian but it doesn't look like that one in your video. Where I can find an updated video that explain clearly the current APP available on Play Store? Thank you

[@John-eq8cu]

does this replace the MT50 or can it work side by side? Is it only for the features available through the Mt50 or are there any additional features? At a minimum, I want to be able to track energy production day by day, because the MT50 only allows me to see today's production, and after that it resets to zero (it does keep monthly production though)

[@박재생-d8q]

I would like to use EPEVER company's TRACER 6415AN charging controller for 24 volt LFP battery. I wonder if EPEVER Wifi 2.4G ( rj45d) and connecting cable can set battery. I would also be grateful if you could tell me what software I need to download for battery settings.

[@imburais]

Can this work in Hi-Series via DB9 to RJ45 Converter? Since the EPEVER WiFi 2.4G DB9 B WiFi is quite hard to procure here.

[@lsanc_l]

did you connect the WiFi module vía DB9 interface with a converter?

[@al-erwi536]

Hello, I have ebox -wifi-01 device from 2015 and it does not have an RTU, how can I register I don't know how to extract QR, sn or RTU

[@BerziOnline]

Has anyone been able to get data responses out of the WiFi stick in any way other than the app? Rest-API? SSH? Telnet? MQTT? Whatever :-) Just a way to receive data not just in an app gui, but in a way you can go on and work for automations with the received values in your environment? I mean, the app has also to send any commands to the stick to get responses. Is there a way doing that on your own?

[@briansomers4753]

If anyone knows how to set two up to monitor two charge controllers please let me know

[@Miiike03]

Love it! If i have 2 Epever Tracer controllers connected in parallel through RJ45, can this Wifi module send data to App for both controllers?

[@SolarEpic]

Hello, it cannot directly manage the data of two controllers simultaneously, but it can handle multiple Wi-Fi networks on the same app.

[@DigitalMind.254]

My solar guardian app show me 3 alarms. 2 for overload and 1 for short circuit. But there is now issue load is only 70watt at night and 10watt in day. Short circuit also fine. I have 40A xtra series

[@SolarEpic]

Hi， please send your question to [e-mail] so that we can understand your question in detail.

[@DigitalMind.254]

@@SolarEpic epever said its software fault we are working to resolve the problem

[@waheex]

very helpful

[@yourmovieclips3155]

Can you set the meter parameters as the battery?

[@carlos_sacalul]

SolarEpic let me to understand better,if i purchase this module,can see my solar production from work far away from home over the internet?

[@SolarEpic]

Yes, as long as your device is within the range of Wi-Fi coverage, it will send data to the cloud, and then your app will retrieve the data you want from the cloud.

[@martink4544]

Hi, can this module be used with XTRA series ? THX

[@phalupium]

Does anyone know how/if this fits in a Tracer-An 100a? The module is physically longer than the compartment is deep. Do I have to use something like a Cat-5 extension?

[@SolarEpic]

Hi, the Tracer-An 100a controller has been improved to accommodate the WiFi module directly.

[@robertwutzi]

Hello, do you know the intervall (data update time) of the stick and where can I change it (e.g. to 5 seconds)? In the manual (Stick and Xtra4415n I can‘t find it). For me there is no real time at all (with the cloud), it takes mintues to update. Manually update a value often ends in „data load timeout“. If I am „local“ or direct-connect-wifi it’s almost real-time. Thanks!

[@SolarEpic]

Hi, the reading interval for the cloud platform data is currently set at one minute and cannot be adjusted by the user at this time.

[@huongsachoalan6193]

Xin chào...! Loại này có thể cài đặt điện áp của pin lithium không ?

[@Rupieciarze]

How to obtain tracer's SN?

[@SolarEpic]

Hi, generally the serial number (SN) of the controller can be found on the side label of the controller.

[@al-erwi536]

Hello, I have a wifi device from 2015 and it does not have an RTU, how can I register

[@SolarEpic]

@@al-erwi536 Hi， please send your question to [e-mail] so that we can understand your question in detail.

[@Official1OUEntertainment]

Where do I find the SN of the Epever MPPT 8420AN Controller?

[@SolarEpic]

Hello, usually this label can be found on the side or bottom of the controller, and it consists of 22 characters to indicate the identity information of the controller.

[@kape3094]

After shuting down epever cloud 19. Okt, this is not work. My Solar Guardian not apply my wifi modul. 0 from me to new app.

[@SolarEpic]

Hi， please send your question to [e-mail] so that we can understand your question in detail.

[@klauspeterrimmel5326]

Hallo, was geht den hier ab, erst verschwinden alle Epever Apps, dann tauch diese App auf die sofort nach Anmelden schreit obwohl man noch gar keine Registrierung durchlaufen hat. Scheinbar hat da jemand einen RIESEN Bockmist gebaut....... Alle die gerade die Dongles kaufen werden Sie zurückschicken oder anders machen aber nutzen geht ja nicht. Was soll das, Restbestände raus und den User dumm streben lassen? Die App ist weder auf Huawai noch auf Motorola oder gar eine Tablet zum laufen zu bewegen. Man sollte den Deutschen Verbraucherschutz wegen Betrugsverdachtes einschalten.

[@SolarEpic]

Hallo, Unsere alte App hatte Fehler und sehr negative Bewertungen von unseren Kunden, daher haben wir unsere Handy-App mit dem Namen „Solar Guardian“ neu gestaltet. Die Registrierung diente nur der Cloud-Überwachung, wodurch Sie die Anlage an anderer Stelle überwachen können, wenn Sie dies nur möchten Überprüfen Sie den Systemstatus lokal. Sie schalten einfach auf „Offline“, die Arbeit wird dann lokal erledigt. Diese App kann von Google Play heruntergeladen werden oder den QR-Code scannen, der Sie zur Download-Seite führt. Es funktioniert mit Android und iOS. Wenn etwas nicht stimmt, machen Sie bitte einen Screenshot und teilen Sie uns dies mit. Wir helfen Ihnen dann, das Problem zu beheben. Für weitere Informationen können Sie uns unter [e-mail] kontaktieren.

[@sorinradulescu2820]

how do i program parameters for ? (battery type etc ) . I cant connect it to the Epever Pair " , I also bought a epever ble rj45 a ble adapter that cant connect to the app (samsung phone ) ???????????

[@SolarEpic]

Hi， please send your question to [e-mail] so that we can understand your question in detail.

[@INFE5T]

When submitting verification email code, it says failed to send. But hours later I get it and the code has expired. If unable to activate account, unit will be returned.

[@SolarEpic]

Hi， please send your question to [e-mail] so that we can understand your question in detail.

[@longnguyenvan1148]

With mppt techfine ???

[@wisalahmad1867]

Hello sir is this the new app and device after cloud? And epever pair app? I have cloud black device and pair app. The use type device is latest ?

[@SolarEpic]

Hello, the video shows the use of the latest wifi adapter. Currently, the corresponding software is constantly being updated and optimized. In the future, the old Epever software will be integrated with it, which may take a few months. By then, your old cloud black settings can also be used with it.

[@SB_Netzwerker]

is the password length of the local WIFI still limited to 16 characters?

[@SolarEpic]

Yes, we don't recommend you set the password too long.

[@bimmers323ci]

hi my wifi 2.4g rj45 d stop collecting data on the home page need some help please

[@SolarEpic]

Hi， please send your question to [e-mail] so that we can understand your question in detail.

[@bimmers323ci]

@@SolarEpic ok I just send a message,thanks

[@carlos_sacalul]

Hi,i have 3 tracer4210AN controllers,do i have to buy 3 this wifi module

[@bimmers323ci]

No you don't

[@carlos_sacalul]

@@bimmers323ci Explain please

[@bimmers323ci]

@@carlos_sacalulyou have to link all 3 charge controller using epever ap-pt-adp-port unit with the pc software and then you can add them to the Wi-Fi unit

[@carlos_sacalul]

@@bimmers323ci Thanks,but i dont find on internet this unit ap pt.adp port unit

[@bimmers323ci]

I got mine from Amazon

[@davidulman5504]

Hello, I'm using the old app, so I wanted to try the new one. I have an old EPEVER WIFI 2.4G RJ45 A device but it won't connect. Will it be possible to connect devices in the future?

[@SolarEpic]

Hi， please send your question to [e-mail] so that we can understand your question in detail.

[@stefanflorin288]

Will this work offline with direct wifi connection ?

[@SolarEpic]

Yes, it supports both online and offline monitoring.