Thanks to @Stegggy for installing our Redline Triple LED Tailgate Light Bar. He took the installation to the next level by hiding the wiring behind his bumper. Find yours at: www.opt-7.com/r...
Пікірлер: 174
@OPT7Lighting6 жыл бұрын
Check out our new and updated installation video here kzbin.info/www/bejne/p4bVYWuqptWCoZY
@shawn22967 жыл бұрын
you're the only one who ever mentioned about a 7 pin adapter that was a genus idea i never wanted ti splice into the 7 pin like everyone else had suggested
@sirbutchford6 жыл бұрын
To all that have a newer vehicle that have a 7 pin connector on the back of there vehicle that will take a newer curt #56584 is a better option because it eliminates having to splice into your tailight wiring..... the difference is the curt #56584 has the 7 pin splitter but has a 5 pin connector on the other end and the 4 pin will plug into the 5 pin and the extra empty wire is the backup lights that all you need is a crimp on bullet connector on the wire coming from your OPT7 reverse wire..... no cutting or splicing needed... Hope this helps
@unctucker16 жыл бұрын
What's the difference between this one and 55384?
@sirbutchford6 жыл бұрын
Joseph Tucker .... They both hook into your 7 pin on the backside of the bumper the same but the difference is that the #56584 has a 5 pin flat plug instead of the 4 pin flat plug and that extra pin is your reverse. It makes it so much easier because you don't need to tie into your factory reverse wiring up at the tailight because all the connections are done at the plug..... It took me awhile to figure out that the 4 pin plug will plug into the 5 pin plug on the Curt adapter but after I plugged it in and tested the leftover 5th pin I knew I discovered an easier way that breaking into the factory wiring... Good luck and I hope this helps you.
@olivierrenaud11726 жыл бұрын
thank you sirbutchford, I am trying to understand English not being my first language....I have a 2017 RAM 1500, 4 pin flat on the bumper, but like you said it is better to buy the 5 pin in order to link the reverse....this is where i am lost, how do you wire the white on that 5 connection.....sorry about asking but I love the product and it seems you have find the solution not to cutting wires....thank you for your response
@sirbutchford6 жыл бұрын
olivier renaud the blue empty wire in the plug after you plug your light in is where you plug your white wire in.. goo.gl/images/oxz3qs
@olivierrenaud11726 жыл бұрын
got it thank you very much
@WERKED667 жыл бұрын
For those wondering what the connection is used it is a Curt 55384 T Connector that is what you need to do a clean install.
@BleedGoldBlue6 жыл бұрын
Can you please illustrate what this looks like? Thanks!
@BaymondRell6 жыл бұрын
I have had this installed on my 2006 GMC Sierra 3500 since they first came out (Only time I EVER purchased from a FB ad). This has been the best looking and highest quality light bar I've ever used, and I have been through SEVERAL. I used the mechanical clip install because it "levels out" the unevenness of a well used truck bed to give a nicer even clean look (versus the peel and stick). I also wired everything under the truck and all I can say is that this light bar is super cool, unique and just a bad-ass eye catcher PLUS it works as advertised and LASTS with zero burn outs or leaks thus far which is well over a year+. Get this one if you are on the fence.
@datboiihjc5 жыл бұрын
Did you also cut the trailer wires for hardwired? I have a 06 Sierra also.
@nemesisxrox67736 жыл бұрын
Good video on an A1 product! Here's my personal review of this light bar ... Purchased one of these w/ the red sequential signals for my "2004 Ram" - did the install using a CURT 55384 adapter harness + also used a short 2-way (2 into 1) harness for an added tow hitch light. Didnt use the 5-pin factory plug hookup at the bumper for anything other than its rear access plug for that CURT adapter. Did have to take the white to the left tail (for reverse) & did this splice where its harness comes up at the frame rail. All was completed within a few hours - all was working perfectly first try with no flaws - yes it all still works after months of usage - never an issue. There is a very short light delay which is of no concern to me - its very minimal - doesnt bother me & all I showed it to once installed never brought it up - it's not an issue to worry about. All lighting is very bright (brighter than most others I've seen in day or night) - Reverse will light up a parking lot - why would u need anything brighter? Ges u could just install some 1000 watters if u need to blind even yourself! BTW - I didnt even remove the tailgate for the install - marked a few lines where the top of the lite bar would be using a grease pencil - it lined up perfect first time - all 3 rows can be seen below the gate & above the bumper. As far as having spare tire access - (my spares in the bed under a bed cover) - if that concerns u than dont buy cuz u will block that access hole. Other than that my conclusion - very impressed with this light bar - highly recommend it - simply a good choice I made ... 'bar none'.
@johnrambo4082 Жыл бұрын
I have a OBT7 Redline Triple LED Tailgate light bar Installed on my 2022 Tundra 1794. Everything works great. No codes/errors on Dash. Then, I noticed on one of my house cameras that when going forward from Braking that the whole light bar flashed Yellow before red brake light appears. It's a quick second or so. Sometimes it does it and sometimes it don't. Has anyone experience that or can check their OBT7 lighbars. You have to have someone watch from behind maybe in a parking lot or driveway.
@peepeesmelly16 жыл бұрын
Wasn't about to cut the wiring for the tail light ... took the feed for the reverse light on the light bar , took some of the insulation off of that and took the reverse bulb out of my tail light and put it on the bottom of the bulb and then into the socket again ... works every time! No splicing, cutting ect.. ..
@douglasruge12877 жыл бұрын
should have read further in the comments. saw that you'd already posted the link. thanks for putting up with me. 😊
@OPT7Lighting7 жыл бұрын
Douglas Ruge all good, was just about to send that over. you can also email us at support@opt-7.com if you need help
@raaedalhaidar67096 жыл бұрын
Nice video install tutorial. Where can I get this splitter? Anyone knows the part number?
@chrisafp0716 жыл бұрын
Just ordered this for my new colorado so excited to get it in tomorrow!
@paulquiroz40705 жыл бұрын
I liked the plug bridge adaptor you used.... Very well installed....
@charlesdougherty71287 жыл бұрын
I installed the opt 7 led bulbs for my headlights on my 09 ram. nice & bright at night time. thanks for posting this video I was looking at these led light bar. they are bright
@johnpuli75023 жыл бұрын
Curt 56584 is a 5 pin so you dont have to splice into reverse light.
@dylanweiskopff19735 жыл бұрын
Would you be able to give me a link on where you got that adapter?
@ExploringNewEngland7 жыл бұрын
best review of this out there man. nice job. i'm sold.
@chuckasarus4 жыл бұрын
I found out on my 2019 that the wire harness is already set up for the reverse light. You just tap the splitter. Im pretty sure its the blue wire. You don't have to go to the rear reverse light.
@AndreychukAndrey7 жыл бұрын
Thanks for posting it. I was looking for a video of how it works.
@frost3816 жыл бұрын
For anyone that wants to do this... there is a much easier way. Open the loom on the trailer harness and spice a 6 Pin Douche Connector onto the trailer harness, then put the male end of that connector on the LED bar. done. 10 Min install. Most trucks will have a reverse wire in the 7 pin trailer harness.
@ckennedy99016 жыл бұрын
Nice video, did you get your exhaust hung up on something? Sorry I’m OCD and it’s bothering me that your right exhaust tip is out further than the left.
@jimdavitt11694 ай бұрын
Great vid. I am installing my new Opt-7 tri light bar and cannot see which side is left or right. I don't want to put it on upside down and have the turn signals backwards. Thanks.
@OPT7Lighting4 ай бұрын
The OPT7 logo should always read in the correct position. For the triple LED bar, the logo should be on the driver/left side of the tailgate.
@Paul-es9el6 жыл бұрын
Have a question if you can help out plz . I just installed the same light on my truck but after mounting and all my tailgate kinda blocks the reverse and Amber strip. The bottom strip you can see but the two rows of leds up top you have to get on the ground to see the yellow and reverse and ideas ?
@certifiedtowingrecoveryhtx6 жыл бұрын
My blinkers dont work, but hazard lights do reverse works, can you help pls thank u
@billyfinch8935 жыл бұрын
Where did you get the 4 pin adapter to hide behind your bumper?
@DJ_PHILCO796 жыл бұрын
What curt custom wiring harness needed for a 2013 Ram 1500?? Thanks
@Canesfan082 жыл бұрын
Where can we find the adapter you used?? I purchased the opt7 and would rather do it that way
@duramaxfl7 жыл бұрын
when u put it in reverse & have your foot on the break is the white& red on at the same time
@OPT7Lighting7 жыл бұрын
If you push the break it will go only red.
@UpStuff4 жыл бұрын
No mention of the access hole for the spare tire?
@lfuentez36 жыл бұрын
There are connectors that have heat shrink ends. In my opinion, would have been better and cleaner than tape.
@kingvampire6667 жыл бұрын
you could of all so used a Connectors Quick Splice instead shaving off the wire and wraping with electrical tape
@richardobrien48096 жыл бұрын
The splitter can be found on Amazon
@joeydelmarsjr.6464 жыл бұрын
i just installed this on my 97 dodge i got the one with 5050 smd all red turn signals where i think matches better with the dodge tail lights it flashes not sequential
@bradenwright98753 жыл бұрын
Is that a 60 inch bar?
@allforpranks40946 жыл бұрын
I hooked mine up, looks awesome. The only thing is when my lights are on the turn signal flashed the whole bar red. When my lights are off but brake is on it light the whole amber part for the signal. Any ideas?
@nightster200816 жыл бұрын
I had a question, I installed the same OPT7 triple light led bar with the amber singnal lighting. However, once I installed it, i hardwired it to the trailer connection wiring. My backup assist is disabled on the backup camera and the auto shut-off is disabled as well. Is there anyway I can get those features to work with the led still connected to my truck. I installed it on a 2017 F-150. The led light works great, however it thinks I have a trailer connected so the auto-shut off is disabled and the back-up assist is off the back-up screen.
@gabrielgalaxygh7 жыл бұрын
great video i plan to put some around my trunk of my car should look super clean
@gray_wolverine634 жыл бұрын
Ok so how do you get your spare tire out if you cover the hole with this light bar which you didn't said anything about ?
@cyee1214 жыл бұрын
How difficult was it to squeeze that bar in without taking off the tailgate?
@dhruveshpatel64694 жыл бұрын
one question if i may the white wire that is separate on the light bar gets tapped into the reverse light correct and 2nd question does this light bar has to be grounded ? because on that 7 pin to 4 pin adapter the white wire on the 4 pin side is used for a ground if everything what i said is correct please let me know
@daltonvetter79947 жыл бұрын
Is there a tailgate light bar similar to this but instead of the yellow turn signals it's either amber or red?
@Paul-es9el6 жыл бұрын
O it’s on my 2002 F150 lariat btw. I installed and mounted in the correct spot but it’s like my tailgate don’t allow you to see the top 2 rows of light. If you squat down you can see it is this how everyone’s is after install ?
@texassportsoutdoors6 жыл бұрын
What if you have a a back up camera and sensors? Will it still work? I heard it wont. Unless you hard wire it maybe?
@monkeynutttttts5 жыл бұрын
Off topic question... what muffler/exhaust are you using? Sounds good 👍🏼
@alanakin14943 жыл бұрын
Isn't that a 60" and if so what did you do about the brackets on each end?
@rammieification7 жыл бұрын
I have a ram 2015 , at the tail there is a hole to put the metal bar in fore the spare tire to drop . The Tailgate bar led comes over it ore not ?
@Jcasta87 жыл бұрын
STEFAAN VERWEIRDER remove the plastic grommet and mount it just about the hole it will work and not cover it
@dellolio887 жыл бұрын
you can put the light bar right above the hole lot of ram owners take the plastic hole/tab out of the spare tire hole then put the tailgate light bar on. i have a 2015 ram 1500 sport with back up camera and a putco switchblade 60inch light bar on my truck
@nemesisxrox67736 жыл бұрын
... if installing on a 2004 Ram - the gate will hit the bar when lowered if u do this.
@familymann19565 жыл бұрын
Install it directly above the grommet for spare tire and tailgate will clear mine is 2017 and make sure if you hardwire it it doesn’t go color to color it’s totally different
@IIMINTORII6 жыл бұрын
So I hard wired this light bar and now my turn signals do not work. Is there something else I need? I am installing on an '88 chevy
@brycee69757 жыл бұрын
If I put this on a 2008 f150 with LED's and Resistors, will the amber scanning match my turn signals? Or will it be out of sync?
@geoss626 жыл бұрын
Does your spare tire hole have enough room to still lower your spare ? have you tried it ?? Thanks
@reginaldwinchester49627 жыл бұрын
How did you hide the wires and where did you plug it into without using the power source on the outside of the bumper?
@unixdoes3 жыл бұрын
somehow it bothers me that the tail lights are all red (perfect!) but the light bar flashes amber for signals
@OPT7Lighting3 жыл бұрын
We do have both in RED and Amber color for the signals. If any concerns, feel free to contact us a support@opt-7.com.
@unixdoes3 жыл бұрын
@@OPT7Lighting awesome, ordering one for my new rebel. thanks for confirming, i should have checked your site -- and also thanks for providing a 7-4 adapter so i won't even need to cut up my wire harness. THAT has always bothered me the most.
@BleedGoldBlue6 жыл бұрын
What are the blue wire taps provided in the ziploc bag for?
@brianadams53692 жыл бұрын
What did you do about the spare tire log hole in that back strip where the light bar goes?
@OPT7Lighting2 жыл бұрын
Fitment for the Redline Triple LED is based on the amount of Tailgate's available flat surface length-wise. If your vehicle has 48" of available space length-wise across the tailgate then the 48" version will fit nicely. If you have 60" of available space length-wise across the tailgate then the 60" version should be purchased. Spare Tire Access Port Accessibility: The Redline Triple LED will cover any existing spare tire access ports. However, the spare tire can still be accessed and lowered using the proper socket wrench from underneath the vehicle.
@douglasruge12877 жыл бұрын
just looked at about half of the 34000 results on amazon for a "7 pin splitter with a 4 pin connector". didn't see anything close to what you used before i started going cross eyed. do you by any chance remember the seller or anything more specific?
@TheBlindPig716 жыл бұрын
How well did the light bar hold up since you didn't use the adhesive enhancer?
@ferrin4117 жыл бұрын
Hey do you still have this light bar installed on your truck? i just read some reviews that say the light bars go out after a couple of months...
@TheBgrave213 жыл бұрын
Did your bar cover up the hole to drop the spare tire down?
@OPT7Lighting3 жыл бұрын
His set up had covered up the spare tire hole.
@goodcitizentx5 жыл бұрын
Just tried to install this on my 2014 f150 . Noticed when I used the module required for my truck it made the light bar 50% Dimmer. Anyone ever had this problem?
@jorgemorales7047 жыл бұрын
Hows it going. u think it will fit a Silverado 2014
@josesilloish7 жыл бұрын
Ok thanks i installed already i just hope not to have any flat tires soon because i wonder how i'm gona get the spare out lol
@Jcasta87 жыл бұрын
josesilloish hahahahahahahaha
@TheBgrave213 жыл бұрын
I ran into that problem on my first truck i had... what's the fix for that, ready for one on my 2nd truck
@randyrusk58437 жыл бұрын
How's it doing now? I've read a ton of people love them at first but shortly after having them they start to see that the LEDs get weak in clusters and some go out. Tell me what you think please. Thank you.
@chancecutler9547 жыл бұрын
go with putco they are more reliable and they have awesome customer service
@raymondmora11824 жыл бұрын
Where are my lites order them on 5/3/20
@NWcpl5 жыл бұрын
Looks good bro, Question? did you install it above or below the spare tire hole so it doesn't block it?
@OPT7Lighting5 жыл бұрын
you can always use the provided mounting brackets so that you can remove the tailgate for the spare tire hole if need be.
@NWcpl5 жыл бұрын
@@OPT7Lighting Thanks for the reply :-) . I honestly appreciate the feedback. That seem like a lot of work. Remove the tailgate to just access the spare tire. plus mine has wiring harness connected to the tail gate for auto locking on my 2018. Like your products big time though. I would be willing to give it go and promote your product if you all feel like sending me one for my 2018 Ram 1500 . :-)
@tomt.a.57197 жыл бұрын
Why can't you just tie the reverse function wire into the 7 pin connector? It has a reverse function too.
@Eddie70686 жыл бұрын
I agree. I'd say you can do just that. No need to remove the tail light and dork with the factory wiring. I would also do a little more than just wrap the two wires together and throw electrical tape over it. That will work for a bit but will eventually work it's way loose. Solder that connection and slip some heat shrink tape on it to make it water proof.
@rickmonroe80055 жыл бұрын
you can lol
@amotley74955 жыл бұрын
What color wire on the 7pin connector does the reverse function wire connect to ????
@patrickd40934 жыл бұрын
Hey, thanks for the install video. Great stuff. I only have one question. I have the same issue, and don't want to splice any wires. Would like to find that t-splitter adapter you have. Been looking online for a couple of days and cant seem to find it. Can you tell us where you got it or possibly a part number? I would greatly appreciate it. Thanks
@patrickd40934 жыл бұрын
I actually found the link to the Amazon listing, deep in the comments. Thanks www.amazon.com/CURT-55384-Custom-Wiring-Connector/dp/B0009FJ38Q/ref=pd_bxgy_263_img_2?_encoding=UTF8&pd_rd_i=B0009FJ38Q&pd_rd_r=Q5P8HBDZCWZCA3JV1VVE&pd_rd_w=TjeDg&pd_rd_wg=MO1Ij&psc=1&refRID=Q5P8HBDZCWZCA3JV1VVE
@marioluiscabrera17677 жыл бұрын
what size was used for this install?
@dtech92557 жыл бұрын
Hi Video very helpful. Can you provide more info on the splitter/adaptor you used, & where to purchase confirming OEM part number please? Thanks...
@OPT7Lighting7 жыл бұрын
D Tech you can find it on amazon if you do a search, we will be carrying the T connector soon.
@popacap216 жыл бұрын
Will it work on a 2015+ f150
@mhsr2001mh6 жыл бұрын
Thats dope....getting it!!
@KhanKhronicles2 жыл бұрын
How many inches is the light bar?
@OPT7Lighting2 жыл бұрын
There are two options, 48'' or 60''.
@rammieification7 жыл бұрын
Dos ii overlaps the hole off the spare tire?
@OPT7Lighting7 жыл бұрын
Not sure I understand this question... can you confirm- your asking if you have a spare tire hole does this cover it?
@KableTac6 жыл бұрын
is this the 48 or 60"
@98CAMPA4 жыл бұрын
do you guys not how the delay on purpose?
@OPT7Lighting3 жыл бұрын
The 0.5 delay is normal if you are using the 4 pin connection, if you want to not have this, then the hard wire installation is recommended. Hard wire the light bar directly into the tail lights.
@stevenramey78616 жыл бұрын
Def just use a t-tap connector than shaving back the wire and electrical tape
@jrwebster277 жыл бұрын
will the spare tire still be accessible from the hole above the bumper after the install?
@OPT7Lighting7 жыл бұрын
On some vehicles your hole for the spare will be covered up, so to access the spare you would need to remove it
@melchorc8087 жыл бұрын
I can't seem to find a T connector/adapter for my 2016 Tacoma. If I choose to hard wire, is the delay in the brake/signal lights obvious?
@OPT7Lighting7 жыл бұрын
We will be carrying the T-Connector very soon. In the meantime you can get T connectors on Amazon or do a online search and you should be able to find one
@melchorc8087 жыл бұрын
Thanks!
@granddaddy14107 жыл бұрын
Is a load resistor required when wiring in older trucks?
@granddaddy14107 жыл бұрын
If you are using an older Toyota truck or a truck with separate turn brake signal you will need a 3-2 converter or 4-3 converter depending on your vehicles set up to get the trailer connector setup. I used the CURT 58240 Non-Powered 3-to-2-Wire Taillight Converter. I am updating my lights with LED lighting. You will need a power resister for the older vehicles with the old style flashers. My lights work great except the turn signal function is still intermittent and the harzard function is not working for the OPT7 as I type this. The tech support at OPT7 has been.... well..... not really very helpful.... sorry OPT7. Hope this info helps.... I am sure this light bar is going to fantastic once I figure out the nuances....
@studioxps727 жыл бұрын
What yr of Ram
@josesilloish7 жыл бұрын
Hello i have a 2011 ram 1500 and i purchase the light bar but i'm wondering do i have to eliminate the hole for lowering the spare tire please help
@OPT7Lighting7 жыл бұрын
josesilloish hi! I'm going to confirm and get back to you ASAP
@OPT7Lighting7 жыл бұрын
After confirming with my product development team, you do in fact need to eliminate / cover the spare tire hole.
@chrisegan96706 жыл бұрын
WHat color does the directional light amber or red? I assume triple red means red but want to make sure
@OPT7Lighting6 жыл бұрын
We have two different color models available. One that uses Amber for sequential turns and the other uses Red for sequential turns.
@ItsAlive1115 жыл бұрын
Does this cover the sprayer tire pulley hole?
@OPT7Lighting5 жыл бұрын
Hi there. prior comments have mentioned that if you position it correctly, you can avoid blocking it.
@douglasruge12877 жыл бұрын
can you please tell us where you found your t splitter
@OPT7Lighting7 жыл бұрын
Douglas Ruge it's on Amazon, you can find a few options, varying prices
@iliyaivanov60817 жыл бұрын
My question is do working brake lights separate from turn signals red and amber
@OPT7Lighting7 жыл бұрын
Iliya Ivanov not sure I understand the question?
@WERKED667 жыл бұрын
OPT7 just another tip if you use the connector used in this video you can tap the center wire which was the reverse on my dodge so no need to hack factory wiring
@oonfoufou7 жыл бұрын
WERKED66 installed mine today and you're right center is reverse so no need to hack into the tail lights thanks for the info
@WERKED667 жыл бұрын
RobRazz no problem I rather hack a connector then factory wiring.
@ChaireS43666 жыл бұрын
i installed same triple bar on my f150 but mine is bot that bright like yours :(
@tgenesis87845 жыл бұрын
Do you still have this light bar how has it been holding up?
@charlesdougherty71287 жыл бұрын
Amazon has this light bar & the connector. you can buy both for $100
@WERKED667 жыл бұрын
Charles Dougherty wrong connector when you look it's a single to a double 4pin connection
@charlesdougherty71287 жыл бұрын
WERKED66 whatever u say
@WERKED667 жыл бұрын
Charles Dougherty just trying to help
@waltercornelio99687 жыл бұрын
Where did you get the 7 pin connector from? I want to hide my wiring as well
@WERKED667 жыл бұрын
Walter Cornelio Curt 55384 T Connector that is what is needed
@waltercornelio99687 жыл бұрын
Thanks
@WERKED667 жыл бұрын
no problem we all want clean installs no hack jobs
@ThePaintman42427 жыл бұрын
Is this the 48 inch or the 60 inch?
@OPT7Lighting7 жыл бұрын
This was a 60 inch bar.
@renalshomlmes3385 жыл бұрын
1) never ever use tape. Get heat shrink. 2) no need to start the vehicle. Set parking brake, turn on key, throw in reverse, film. Done.
@joeydelmarsjr.6464 жыл бұрын
use where ever you got one time i used duck tape and other time i used silicon gasket maker never had an issue
@jrwebster277 жыл бұрын
where did you get the 4 prong adapter from?
@OPT7Lighting7 жыл бұрын
We will be carrying the T-Connector very soon. In the meantime you can get T connectors on Amazon or do a online search and you should be able to find one
@83cjwest7 жыл бұрын
OPT7 could you please post the link. i have searched and can not find a harness that goes to a flat 4pin...💀🔫
@OPT7Lighting7 жыл бұрын
Check out Curt products on Amazon - www.amazon.com/CURT-56584-Custom-Wiring-Harness/dp/B007EA6WQU/ref=sr_1_4?ie=UTF8&qid=1496430849&sr=8-4&keywords=t+connector+trailer+wiring+harness
@83cjwest7 жыл бұрын
OPT7 thank you so much! going to order the adapter and the light bar today
@expotourlasvegas5 жыл бұрын
Nice 👍🏼
@bigdave86436 жыл бұрын
That's not a waterproof seal it will turn green . So don't do that with electric tape..
@tobyphillips41966 жыл бұрын
Don't splice? Just skin wires and wrap wire around? Obviously a total amateur and should not be making "How to" videos! If you want electrical problems go ahead!
@colkuv7 жыл бұрын
That Curt 7 pin to 5 pin isn't the same as in the video. I'm still looking for the one in the video he uses to to work with the light bar which is a 4 pin connection. Any one have a link or idea where to get the exact same one he uses in the video?