Ortur Laser Master 2 Pro S2 - FULL TEST

[@bethshealinghaven]

I also noticed that with the air assist that there was next to no smoke. When without it, there was all kinds of smoke

[@ikaan381]

Do you think this laser could engrave on dried flax material? Or would it catch fire?

[@MD-Coin]

Is the long focus (LF) a better laser than the short focus (SF)?

[@nicole5145]

Hi,the LF is better at cutting,and the SF is better at engraving

[@k4001x]

Hi, I'm leaving a comment to get some help. The first time I put it together and turned it on, the power lamp and the USB port lights are flashing alternately, and the machine is not responding Did something go wrong? Please help me😢

[@antoniomoreno7718]

May i know the setting to engrave on stainless steel?

[@juanfeliperodriguez6553]

Hello, thank for your clear content. I want to buy a laser to cut polyester lycra fabric. Can this laser cutting bundles of fabric?

[@sinis9451]

Our suggestion is to cut layer by layer for better results.Cutting multiple layers together will easily catch fire.

[@DIYTECHBROS]

Hi! Thats no problem! But, it will cut multiple layers. Use air assist to avoid fire!

[@khawlaahmedi1103]

Hi, thanks for the video .. can it engrave leather boxes ?

[@khawlaahmedi1103]

and is the height adjustable ?

[@Sam1970Sam]

Hi. I ordered this -- ARTUR Laser Master 2 Pro S2 . Can you help me which programs I need and where to download ? to work with the tank and make drawings to burn .. can I link to the programs please .

[@DIYTECHBROS]

Lightburn is by far the best software! It has a free trial period as well. LaserGRBL is a totally free option, but has no design possibilities.

[@Sam1970Sam]

@@DIYTECHBROS I'm new to this business. . Artur Laser Master 2 Pro S2 . LU2-10 I have a question for you in the LaserGRBL program, when I aim a laser for example on a ballpoint pen, when I want to write a word, before that I turn on the laser to see its position and its directions as it wakes up to write . But after that , I still have a thin strip where the laser light sight passed . I looked at 3% of the laser in the settings, set it to 1%, there is still a strip.. What else can be configured and how ? so that the strip does not remain on the object, the top layer of paint burns a little.. If there are lessons or videos how to solve this problem!

[@rebeccalee8778]

Hi, will this engrave clear cast acrylic?

[@sinis9451]

Sorry，it can't.

[@philoara5647]

A votre avis, combien de mm maximum de médium peut on couper avec une Ortur ?

[@DIYTECHBROS]

Hi! When cutting thicker materials both the kerf and number of passes (time to cut) increases a lot. 5 mm is no problem, but 10 mm on a regular basis might be a bit much.

[@philoara5647]

@@DIYTECHBROS Thank you very very much for your answer from France 😘 !

[@bangwill07]

It can cut 2mm clear acrylic?

[@DIYTECHBROS]

Only dark acrylic, preferably black!

[@marvision2647]

Hello sir i am using ORTUR LU2-2 lasar is it possible to connect lu2 - 4 - lf laser in same machine and can i get laser head only as above.

[@DIYTECHBROS]

Yes, just replace the laser head and it will work!

[@VintageForYou]

Will this cut clear acrylic

[@DIYTECHBROS]

Hi Malcolm! No, it will not… no diode lasers can not cut any clear materials as it light will just pass through. This is a matter of light waves. But, a CO2 can!

[@490o]

Can it engrave metal?

[@DIYTECHBROS]

Stainless steel is no problem :-)

[@kfergus3662]

You didn’t show an engraving 😢

[@owldobegaii4732]

Im trying to find a good place to order this product , for some reason the ortur official website isnt working for me.. send me a link to a legit purchasing . Can anyone help me with a link that you trustfully order from.. thanks

[@DIYTECHBROS]

Sinismall is an official seller, see the link in the description :-)

[@owldobegaii4732]

@@DIYTECHBROS thank you ..ill look into it now

[@WhitetailSpecialty]

Great video

[@mateus_workshop]

On my channel you have an unboxing of the new Ortur machine

[@BloodSteyn]

So... 20W.. but actually just 5W of real Laser power.

[@andre2028]

100% Power is no good Idea :-) Better use max 90 - 95 %