Osmo Door Oil - Before you Buy

What do I need to consider before purchasing Osmo Door Oil? Is Door Oil the best choice? Door Oils can be applied to almost any door from solid to engineered. Door oils are easy to apply and just as easy to maintain.
In this video Jay from Wood Finishes Direct will explain everything you need to consider before purchasing the Osmo Door Oil using special tests to detect previous finishes and how to prepare the door for application.
Products used:
Osmo Door Oil: www.wood-finis...
Osmo Paint Tray: www.wood-finis...
Sandpaper: www.wood-finis...
Finishing Pad: www.wood-finis...
Osmo Wood Protector: www.wood-finis...
Contact information
If you have any questions or would like any information or advice you can get in touch: 01303 477 555 or www.wood-finis...
Disclaimer
Always use suitable protective equipment, and take due care while applying any of the products featured in these video’s.
All prices are accurate at time of the video going live
music by woods acoustic folk

[@helenclark6954]

Where do you get a finishing pad from please

[@Tony-Stockport]

Thank you for this excellent video. Informative and to the point, exactly what I needed.

[@johnsherlock1453]

Hi, great video. Can you advise how to remove grease/finger print marks from an untreated engineered oak door before I apply Oslo clear?

[@WoodFinishesDirect]

Hello John, Good question I would recommend a light sand with P120 sand paper and degrease with methylated spirits. I hope this helps. Jay

[@alsacs3635]

What product do you recommend for an exterior door?

[@judygee6025]

This is so good, thank you. I have just ordered all that I need.

[@WoodFinishesDirect]

Hey Judy, Thank you for your comment we are glad you found the video useful. If there is anything else we can help with just ask. Thank you, Jay

[@PaulVick]

I have to apply oil to 5 interior doors, what volume of wax do you suggest I would need for that size a job? Thanks.

[@twelveightyone]

Amazing, nice one (just had 2 oak veneer doors fitted and am going to be doing this soon).

[@WoodFinishesDirect]

Thanks for the Comment Jay Kay! You know where we are if you need any product recommendations or advice! Ben

[@nataliehayden8330]

Hi, using with an oak veneer door. How much of an area do you apply oil by brush before wiping with the cloth. The whole door side or small sections? Thanks

[@twelveightyone]

@@nataliehayden8330 I didn’t wipe them, just a very thin coat with a brush.

[@nataliehayden8330]

@twelveightyone Hi I have 2 runs in my first coat on oak veneer door, obviously too much oil applied by brush. How can I rectify before next coat please?

[@twelveightyone]

@@nataliehayden8330 give it a very light sanding on the drips. You’re also probably using too much oil on your brush. Use it sparingly.

[@Jay-ft7qt]

I have the Wickes oak veneer doors. Do I have to send them before applying the oil?

[@WoodFinishesDirect]

Hello Jay, I would recommend lightly sanding the door with P120 sand paper. Products such as Manns Premier Door Oil, Osmo Door Oil (3060) and Fiddes Door Oil have been specially designed for use on veneered internal doors. It gives interior doors a tough, durable, clear, satin finish. Always check the door manufacturer's guidance before treating veneered doors as in some cases, it may invalidate the warranty of the door. Thanks, Jay

[@thevintagepeddler]

Hi, thanks for the great video. Is there a Osmo product or other long oil that you recommend for exterior doors? Thank you

[@WoodFinishesDirect]

Hello for exterior doors we would recommend the Osmo UV protection Oil same application process applies. Jay

[@thevintagepeddler]

@@WoodFinishesDirect thank you. Love Osmo products

[@stonedhousestudios6829]

Hi, I'm just about to treat 6 brand new unfinished oak veneered doors with Osmo Door Oil 3060 Clear Satin. For the bathroom and kitchen doors I'll look to give those a coat of the Protector first and then a coat of the clear satin, but will this give the protected doors a different look to the other doors which I'm intending to just give 2 coats of Clear Satin and no protector? Thanks in advance.

[@WoodFinishesDirect]

Hey thanks for the question there shouldn't be any difference in the look but please do a test area before fully applying as all wood reacts differently. Thanks Jay

[@alyuen8396]

Hello is there any wood protector I can use with the raw oil? I prefer the raw finish but need to do a bathroom door. Thank you

[@WoodFinishesDirect]

Thank you for your enquiry. There isn't a Wood Protector that is suitable for use prior to applying the 'Raw' products. If any clear product is applied prior to application of the 'Raw' it will darken the grain. This will in turn cause the white pigment in the 'Raw' to be visible over the top. It looks very dusty. I hope this helps.

[@mak.ak.uk.]

I have engineered oak doors. For bathrooms, do we apply the wood protector first and then apply the clear satin door oil? After applying the wood protector, how long do we wait before applying the door oil?

[@WoodFinishesDirect]

Engineered Oak doors are a very grey area as the products you can use to finish them depend heavily on the glues used to hold the veneers on. Some door manufacturers use water-based glues and some door manufacturers use solvent-based glues. If the incorrect product is used, then this can soften the glue and delaminate the veneers. This is why it is important to check the door manufacturers guidelines as to whether a penetrative oil can be used. If the manufacturer states that the Osmo Door Oil can be used, then you will only require 2 thin coats of the door oil. Either (3060) clear satin which will enrich the natural colours in the grain or the (3033) Raw which is designed to keep the Oak lighter. The Wood Protector should not be used.

[@mak.ak.uk.]

How long does the door oil take to dry on an oak door? Is it OK to apply the door oil without removing the door from the hinges?

[@WoodFinishesDirect]

The drying time on the Osmo Door oil is 6hrs between the 2 coats and then it will be touch after 6 hrs after the second coat. It is always better to remove the door and the door furniture before application as this will achieve a better final finish but we are aware that this isn't always possible.

[@mak.ak.uk.]

@@WoodFinishesDirect My painter only applied 1 coat of the door oil - and that was over a week ago. Is it still worth applying a second coat now and is it necessary? or has the opportunity been missed?

[@WoodFinishesDirect]

@@mak.ak.uk. Thank you for your enquiry. Yes, it is vital that 2 coats are applied to the doors. At the moment with 1 coat they are not completely sealed against moisture and you wouldn't be able to clean them. Please apply a second coat whenever possible. I hope this helps. Please do not hesitate to contact me should you require any further information. Kindest regards - Alison - 01303 213838

[@rebeccastark2390]

What oil would be best for 1930s pine doors? There already very dark after dipping and sanding so would like to maintain the colour they are and cannot decide between a satin finish or a Matt finish Thank you

[@WoodFinishesDirect]

Hello Rebecca, When choosing a sheen it comes down to personal preference we do test sample sachets of the sheens. Matt will reflect minimal light giving you a flat look and Satin will reflect 50% light almost like an egg shell would. I hope this helped Jay

[@shayanchaudhary8613]

For Oak Veneer Doors, I want the clear matt. Do I need Raw 3033 or Clear Matt 3058? It says 3033 is a door oil but it does not mention this for 3058. Need help! Thanks :)

[@WoodFinishesDirect]

Hey Shayan, Clear Matt 3058 is a durable worktop oil that protects and enhances the natural character of wooden worktops. The door oil comes in 3033 Raw and 3060 Satin, may I suggest the Manns Premier Door Oil? A premium grade door oil that enhances and protects solid wood, engineered and veneered interior doors. Dries to a natural matt finish. Any question's please ask and don't forget to subscribe for future content. Jay

[@shayanchaudhary8613]

​@@WoodFinishesDirect Hey, thanks for the rely. May I ask the 'Manns Premier Door Oil' that you suggested any good for OAK vaneer doors, or is this for solid doors only? Price seems to be the same as Raw3033.

[@rosemcommm]

Why would I use this over Polyx?

[@WoodFinishesDirect]

Hi. The Osmo door oil is a thinner blend than the Polyx oil and is designed to work with a wider range of woods, as the veneers can be made of various different species of wood. Always check the manufacturers label on the door or with the door manufacturer before applying a door finish to confirm suitability. This product may not be suitable for some types of door.