OTF Knife Buyers' Guide | Knife Banter Ep. 41

[@Volsabor35]

3,200 for a knife and it doesn’t even self-retract.

[@fernandoruiz7713]

And it’s obnoxiously big, my UTX-85 is a great size and gets the job done, I don’t need a bigass 4 inch blade

[@quantumleap4023]

That thing has nothing in it that justifies the price! A $30 Timex watch has more complex precision engineering than that pos.

[@witchhunt99]

No shit what a joke

[@ladydragon7777]

Only a dumb idiot would pay that much for a knife.

[@suicide_pyro6395]

Just because you can't afford it, you don't have to hate

[@14U2C]

For $3200 I can walk around with a backpack full of guns lol

[@davidmoya9157]

Tight ass

[@calebnation7797]

What like 5-6 good quality guns

[@14U2C]

@@calebnation7797 yup, and a small backpack😅

[@pipetman4645]

You can literally arm your whole family with quality rifles like AR15 from SW or Springfield lol

[@rebellucy5610]

@WeeItsNookies Get Both!

[@skjporkchop]

The halo music when you showed the halo 5 made my day.

[@xabalba555]

The Odd Calvanist same

[@MrCholoPants3415]

They should've shown some shitty 343 ripoff halo 5 music lel

[@wyattgreene]

The Odd Calvanist didn't even notice that at first 😂

[@I0nlyRunFactory]

this whole video made my day.

[@armourdillo1236]

Loved it

[@shallowcinema8359]

Knives are not a poor mans hobby. Unfortunately I’m poor and a knife collector

[@paulsecrest9427]

JP Productions check smoke shops be surprised what you will find.

[@the48thvain]

Same

[@officialWWM]

Same, so I started making them myself :)

[@ronazdug]

In that case you need to become a collector of shitty knives

[@koalabear4619]

Sighhhh me too, i live in antique shops and flea markets.

[@manuelmoreno9298]

It would be nice if you guys include the prices for every single knife you guys review

[@du11scythe]

there’s a description for a reason

[@gradyames2055]

@@du11scythe why waist your time 😂

[@dlepeau7]

they ussally do

[@Iaintgivingmyinstaout]

@@gradyames2055 because he had to notify a person theyre mistake otherwise they would keep on douching other videos about this thing that he is too fucking stupid to figure out.

[@devynrossi]

@@Iaintgivingmyinstaout *their

[@kidu7819]

A wristwatch, pen, a torch and a knife has always been my everyday carry since I was 15 years old. I can't count how many times a good, sharp knife has saved my day. I grew up in the Philippines and there wasn't a lot of places to shop for beautiful knives like these. All i had was a couple balisongs from Batangas and a few pocket knives with cheap steels. Now that I'm in Canada, I was hoping to carry on my love for knives and to level up my collection. But then I found out about the stupid knife laws here. I found this amazing channel in search of a knife that's legal in Canada. I don't know if you can tell me what knives are considered 'legal' that can cross the border, cause every time I watch your videos, I'm dying to get my hands on the knives you feature. This has turned into a rant. Anyway, great contents guys. More power to you. Love Blade HQ!

[@wnJhntn]

How do you carry a torch??

[@lukemikolite1087]

@@wnJhntn thats British slang for a flashlight

[@vevenaneathna]

@@wnJhntn lol

[@wnJhntn]

@@lukemikolite1087 ik but still

[@mulletover3575]

In a pocket?

[@KamakazeTaco]

If you're gonna get a single action why not just get a regular folding knife?

[@kingneutron1]

No kidding, check out the Kershaw line - you can open them with your finger and they lock REALLY well!

[@nickgwiazdowky80]

its about the action man, any chinese OTF can spring open, now can every knife withstand the locking mechanism of a microtech halo? i think not

[@raiderfandew]

EXACTLY! What's the point of a single action knife? Kinda' like a single shot concealed handgun.

[@zoalina]

Lance Rothman **COUGH** EMERSON **COUGH** **COUGH**

[@MrCoololdman]

@@raiderfandew i tried a double action and its much harder to open/close, my fingers are not very strong...

[@joshdude2137]

i have always and will always carry a lightning otf. as a mechanic there are a ton of times when i need a blade while one hand is busy, its cheap enough where i can buy 4 and not cry when i break a tip off or inevitably give one away to someone who thinks its just awesome. they are rugged and hold up well to abuse too. im not a knife addict like most of you guys, but this is one that i wont go without.

[@agnikadams]

I carry a Ravencrest Tactical for the exact same reason! I like the I can replace the blade for cheap (picked up a half dozen during one of their big sales for $15 apiece!). I'll have to check out Lightning OTFs, never heard of them.

[@jojojaykay]

Hey man. The lightening is definitely not something I would buy (don’t like OTF in general) but if you found something you like and works that’s sick dude. Always great to hear about people’s blades that have served them well. Awesome reading your post.

[@future_phonk]

Single action otf is like a bolt action rifle imo.

[@Fox923-s1z]

bbnguyen92 Imagine a knife that is like the lower of a bolt action rifle. Pull the trigger and the blade goes out. Pull the bolt back and it recharges. It’d be cool but not practical

[@RonSpilker]

Seems like they are about the getting the knife out and ready to go. Looks liek they still function the same to deploy, so good for protection, but very inconvenient if this is the only knife you carry.

[@Mit852]

more like a straight pull

[@Mit852]

@Random Name they are outdated in a world of self loading rifles

[@Mit852]

@Random Name a bolt action rifle in combat against pretty much any self loading rifle is totally obsolete. You cannot fight with a bolt action anymore.

[@SuperReviews4you]

Just moved to New Hampshire from California. Ive always wanted to own cool knifes and guns and now i can!

[@jerryvelasco1474]

As a native Californian. You made the right move. Cheers 🍻

[@pipetman4645]

Bob Smith lol

[@pipetman4645]

Gryphon aha! I moved to Seoul from Missouri couple years ago, you have to get a licence and get background checked to legally own a folding knife that is longer than 2.3 inches god dang 😂😂😂😂

[@pipetman4645]

MrBanditoMan they are afraid that people will stab someone with a two inched knife 😂😂😂😂 screw them Im getting one anyways

[@pipetman4645]

MrBanditoMan speaking of which, today is the day that my fox 599 comes man 🤣🤣 I cant wait

[@whitleyhousehold5301]

Im so glad you guys reviewed both the ultratech and the phaeton. I just won both in raffles spent $40 on the both combined!!!

[@mikey69lover50]

Lucky bastard!!! Very nice

[@CarlAquaForce]

@@mikey69lover50 you stole the words right from my brain🤣

[@XxkillerswagxX]

getting into knives after finding a phaeton 4600 on the ground while walking the strip, pretty cool.

[@masemasemasie]

No fair!!

[@wyattllc]

lightning otf, hands down best bang for the buck. ive used mine HEAVILY for the past 3 years w/ no hiccups

[@jonathankohl6264]

Can you buy these on Amazon?

[@wesshort757]

Referencing the Deadlock: “Just under 2.” Me: oh that’s not crazy. “2 Grand” Damn never mind.

[@sixshooter4570]

Only paid $1,250 for mine.

[@Aditya-wg3lp]

@@sixshooter4570 might as well get a beautiful pistol lol

[@David-js6sl]

2:40 who tf would spend 3 racks on a single action OTF💀🤦🏻‍♂️

[@USA2283]

David Gonzalez lol I spent 5 u ducking degenerate.

[@David-js6sl]

Big Chungus see there’s the knife aficionados and then there’s the retards.. guess which you fall into

[@jerryvelasco1474]

All I know if I ever have an altercation with some idiot and they pull out a $5g knife. I'm pulling out my 400$ Glock. Then I guess I'll have a $5g knife.😏

[@mattrobinson4111]

Jerry Velasco, seriously... you could buy a glock for every room in your house and car for that price.

[@codmodz8113]

Big Chungus hahaha you got ripped off

[@StarDarkAshes]

$3000? Not even worth it.

[@zzz7zzz9]

no shit. no knife is. it's for stupid people with too much money who like to brag about how much they paid for something.

[@problemsolved3293]

This is a knife a rich business man buys his boss for Christmas, that's about it. the annoying part of the design aside from 400 year old bamboo (wow so rare, bamboo!) is the fact that the entire advantage to an OTF is it can be double edged, if its single edged, it can be a side folder since the blade side is covered! at least put a saw blade on the back AMIRITE?

[@officialWWM]

I'd probably lose it anyway :/

[@jacobbenns6090]

@@officialWWM no u

[@woodpecker1333]

3k.. No way

[@richardalexander5758]

Around 1995 I started collecting well made 'no name' auto knives with ATS-34 blades packaged in blue plastic mesh with a parachute logo on the steel. These were the first coil spring autos I'd seen, and while somewhat expensive, the quality was far better than other auto knives being produced back then. One day my dealer showed me a large mat grey OTF from this maker that was twice the money of his other already pricey knives. It was the first truly functional OTF I'd seen, and too cool to resist, so I added one to my collection. Several years later I found out it was Robbie Dalton that had been making these knives, and this OTF was called the Cupid. I still have two of his folders, as well as the Cupid. These knifes have all been stored with the blades deployed so as to be easy on the springs, never carried, and only opened a few times to show friends, so I had to check out your video to see what has been happening in the world of OTF knives since then. Wow, a great selection, and pretty reasonably priced, other than the dead-lock. Thanks!

[@carlosmatos9848]

9:40 I've got one of those and that spring ting started to drive me crazy after awhile, lol. So I opened it up and put a dab of grease on the spring to dampen it. Solid as a rock now with no vibrating springs :)

[@plasticshowdiver9157]

I dropped my akc-f16 2 times in the water and it still fires flawlessly after 2 years of carrying it, for 50$ it’s a solid, yet simple, knife

[@deryckwalbom5446]

Damn, they said $40, you paid $50, I got mine for $60, amazing knife.

[@nakian5316]

Wow that deadlock looks sick....anddd it's $1,100

[@ianhinkle1878]

2:28 the Ultratech only has one spring for the blade, it just goes in both directions

[@ferrisbueller9991]

Indeed. I saw the video where a knowledgeable guy opened his microtech up and clearly showed the spring and its parts along with clearly articulating how it all works while he uses the ultratech as a visual aid. Really really want a Microtech. Always as a kid I wanted a Benchmade but my tastes have refined. Also Microtech charges premium prices, not inflated pretentious ones. Should we really have to pay 500-1000 for a benchmade otf. If they want to sell gold plated knives with artisan engraving for hose priced that's fine by me. I respect it as a work of art as an artist/designer myself. But the pragmatic ones (the tactical class denoted to police/military utilitarian application like the Infidel costs an exorbitant amount) The infidel (coolest looking one) has the activating mechanism it a far sillier place. I imagine most would switch their grip after firing it so you can hold it like you would a Microtech from the start. Benchmade has a Phaeton model (highly borrowing from Microtech in design) that has the activator in the same place. It is twice the price, like exactly and yet Microtech is universally agreed to be the best when it comes to OTFs. Along with the fact their brand integrity in the court ofpublic opinion is unwavering from what I've seen. Can't find a vid dogging on Microtechs easily. Opposite is true for Benchmades, a single youtube search will yield plenty: those with stupid complaints and those with valid ones. I've never owned either but I've followed Benchmade for like a decade, finding them via my early teen obsession of butterfly knives, youtube clearly told me the Bechmade model 42 was king of the hill and it looked the part in how it flipped and the testimonies that followed with its durability and lifespane. Fairly certain it is the most beloved knife they ever made. Only one I'd spend half a grand on. Too bad I can't.

[@hermitgreenn]

Because unlike a single action OTF, it's the user who "charges" the spring. It's at rest both when deployed and retracted.

[@grantchu2333]

Can u show the edc knife of everyone working at BHQ

[@akui88]

yea, go around the building like conan obrian would and tell everyone to whip it out without giving them a heads up. like a surprise attack, or surprise gear check!

[@ee222]

i like this idea! so let's be fair. you spent shot show asking all your interviewees what's in their pockets, now's the time to do another one asking all BHQ staff what's in their pockets as suggested by kingleone blader. that oughtta' be a great vid to watch!

[@The4cp]

That's a great idea!

[@quentonmillstid850]

not everyone carries a knife on them at work

[@honestdave]

Edc check

[@IIwII_usxx]

when he says "whatttttt isssss uppppp guysssss" I always feel like hes gonna say "dramaaaaaas alert nationnnn I'm your host killerrrrr keemstarrrrrrrr"

[@DreamcatcherMedia]

Old Hickory makes a great ice pick for $5

[@TheWraithone]

Thay should have had the Cobratec CTK-1 in medium as a good entry level OTF. I just picked one up and I'm not disappointed. Plenty of reviews to see for your self. My next one will be one that was not featured in this video. It's the Guardian Tactical Recon 40.

[@larpology5282]

severe lack of quality double action otf in the $75-$175 range, big hole in the market that could be filled

[@benbyers1041]

Cole F amen I would drop 200 on a double action if I could find a quality option 300 is just too much

[@elgundown941]

type in purpledc on youtube

[@GoBoT-ow9kn]

Ravencrest tactical

[@Xaluber]

There are some incredibly good OTF knives in that range but they're mostly Chinese clones. Check out Vespa knives on DHGate. I bought their latest Combat Troodon clone and for $160 its actually quite a bit nicer than a real one from Microtech.

[@ComprehensiveContext]

Cobra Tec

[@the_watchman327]

I learned a valuable lesson about how to PROPERLY reset a blade back on track when I was 8 & ima share with u guys.. hold the handle right side up and allow the blade to retract back into the handle then flick ur wrist in an action as if ur trying to sling the blade out of the handle and wala instant reset without the danger of slicing ur finger off

[@tactical690r2]

The AKC F-16 segment at the 9:00 mark... a collision of "all you need" vs. salesmen awkwardly struggle to save face whilst pushing a $300 knife. Zack keeping it real. :D

[@jdp21211]

I got a Microtech Ultratech Hellhound Apocalyptic from a friend, and it is the prototype, and the only one made. Value of over $500. It’s beautiful.

[@joelilley6001]

I'm late as hell but I just got my first otf knife that is the benchmade infidel. I got this knife for free and didn't realise how expensive it was lmfao. I stay out of town in a hotel for work a lot and I forgot my jacket there last week. So this week I asked if they have a lost and found and they did so the clerk gave me the key to the room to find my jacket and this was in the bottom of the box. I asked the clerk how long its been there and he said for a few months sink asked if I can have it and he said yes. I'm very happy with it and its fun to use. I also noticed that it only has very very minor blade play witch is awesome as well. Now I just got to figure out how to take it apart to clean it if I need to.

[@anonymoususer20246]

I have one of the MicroTech Storm Trooper series and just picked up the Benchmade Infidel. The MicroTech has a heavier trigger and more snap while the Benchmade feels lighter. Both are razor sharp but of the two I prefer the Infidel as it feels better in my hand.

[@teddrobles5901]

It just feels that it would pierce through my thighs with this kind of knives.

[@manstersr]

I think most of them rely on inertia to carry the blade all the way to the stop. I have a cheaper one that I tried against a toilet paper roll and it barely pierced two layers with a double edge dagger style blade. You might get a little puncture from the point but it can't stick into you or go in deeply. Besides, it takes some force to fire the switch. I've had more folders open in my pocket and cut my finger trying to put my hand in my pocket.

[@punished_gooner]

if a micro tech were to fire in your pocket it would almost definitely derail. it is a built in safety feature

[@RolandKoller90]

You can fire a microtech into a piece of paper and it derails, they are not dangerous at all.

[@deathgun4638]

The blade would derail you could activate the knife in front of your candy and you would not get hurt

[@uniquemeek5520]

The infidel is one of the most outrageously priced knives ever

[@lj5673]

Bought one a few months ago, it won't retract all the way if I hold it upside down, very sluggish. I know I can send it in and they will fix it. But for a 400 dollar knife, I was disappointed.

[@rlanger3108]

Obviously, its a benchmade.

[@uniquemeek5520]

R Langer obviously

[@plasticshowdiver9157]

I’ve carried an F-16 for a year and a half now and I’ve gotta say, I’ve dropped it in water about 6 times, dropped it on concrete numerous times, used hard edc, and it fires just as fast as it did when i bought ut

[@greenstr1179]

I could buy a few guns for the price of some of these knives

[@ka9vmp]

I like that the switch activates spring tension on the blade of otfs. This way the possibility of an involuntary pecketectomy is unlikely during deep pocket carry. A cocked blade under tension where the switch is simply a firing mechanism may cause decocking of the user, "bobit syndrome". A highly undesirable affliction.

[@jacobbenns6090]

Very technical terms mate, you definitely don't want to pull a theon...

[@robbieracer3294]

What I find odd is the more expensive knives don't have a safety switch. I've heard of a guy that had an infidel go off in his pocket, according to these guys, that's a 300 dollar knife. But my shrade was 30 bucks and it has a safety. It's never gone off no matter how hard I purposely tried. You'd think a 100-500 dollar knife would have a switch

[@evanshaw6123]

You don’t need a safety on a double action otf. They don’t ever “accidentally” go off. The spring is at rest, and to move the slider, you have to put considerable force to activate it as you are loading the spring itself. Look up how they work and you’ll understand.

[@ka9vmp]

@@evanshaw6123 I do understand. The one I am leary about is not double action. A lanyard cocks the spring. It remains under tension until released. That One, could cause a body to go off half cocked. Pun intended, so you understand.

[@jjj.5562]

the halo theme caught me off guard lol. you said halo 5 and i was like "haha halo 5" and then the song came on and i thought that was in my head!

[@mcmneverreadsreplys7318]

11:03 mark. I carry the S&W OTF and love it. I wish to note that you (or at least I) can retract it with one hand. I place the butt on my palm with my thumb on the reset slide. As I draw the slide back I tilt my hand down (seems to give me more distance) and the blade locks easily.

[@shmavey94]

I was literally searching for an OTF comparison video a couple days ago, it's like you guys read my freakin' mind!

[@emeraldstar1212]

AKC Concord so far best budget OTF have every had. Had this OTF for over 5 yrs now with now problem. AKF f-16 fell apart first time deployed blade. As a woman Concord fits in my palm concealed which is important in self deference.

[@MichaelTV44]

Now equipped with all-new patent pending Podium jimping.

[@gnydick]

There isn't a spring for each direction, that wouldn't work because you'd have to have one spring able to over power the other in each direction. Obviously can't have that work both ways. There are two springs, but in parallel for added oomph. The way it works is there is a sliding frame that stretches the spring in whatever direction you want it to go and when it reaches a strong enough pull, it reaches and trips a lever to allow the blade to slide.

[@ZenaBlase]

There is just one spring in the Ultratech, but you are correct in that the spring(s) is/are not opposing, as misstated in the video; "one in each direction." Actually, knife guys should know the difference. This is somewhat akin to an automobile expert stating that a Ford Focus has two engines, one to go forward and one for reverse. The D/A Microtech OTF's with the 'top' buttons (which is all of them, up to the new Dirac) have the spring that's suspended on a carrier and the carrier has a cam in front and in back. The spring has two hooks; there's a hook on the front and one on the back end. As the firing button slides the carrier, the spring tension increases while at the same time the cam on the carrier depresses a spring-loaded leaf lock in the knife's frame. There are two locks, one on the front at the top, and one on the rear at the bottom. When it's sufficiently depressed enough to clear the blade, the lock releases the blade, the blade is propelled by the pre-tensioned spring via one of the hooks, on either the front of the spring, or the one on the back (on the other end of the spring), depending on which direction the firing button is travelling. It's kind of like the catapult that launches aircraft off of an aircraft carrier.

[@sixshooter4570]

Just purchased a Hawk Deadlock Auto, carbon fiber marbled handle, hardened stainless steel screws, titanium hardware and premium CPM 20CV sharpened double edge blade. Can't wait to receive it this coming week.

[@elitelax2398]

My heart goes to lighting otf

[@Thisguydoesstuff]

If the steel was worth a damn I would have gotten 5 more.

[@eddieking2976]

ELITELAX23 They are some great budget knives for sure.

[@Tslayer98]

ELITELAX23 hi

[@toddlehman928]

Love my Lightning. Comes sharp as hell too

[@jclar3565]

I see your point but I guess on the other hand there is no metal on on any of those guns that is as high quality as some of your Bohler 390/690 and other particle steels.,

[@jeremyburris4890]

Wow that deadlock is awesome

[@experienceprecision5406]

Thanks 80s movies for making OTF's expensive.

[@jonathanhudson4623]

I have a few of these but I didn't expect to see the double action lighter. Mine is red. I also go mine s sharp as a scalpel. Its actually a nice little novelty OTF. My cat spilt a coca cola in it which sucks because I had just blue loc-toted all the screws. The best thing you to do with any knife you buy is to take each screw out one at a time and loc-tite each screw. Most every knife that I've had break is just from screws backing out and getting lost. Get a tiny precision screw driver b UK t set from Walmart for around 7$ (bits are hollow ground) and a little bottle of blue loc-tite and you will make your knife last damn near forever.

[@oaomcg]

Watching these guys flicking OTFs in and out repeatedly and waving their hands around in front of each other makes for an exciting video

[@MaximumNewbage]

OTFs are more expensive on average, have less ergonomic handles, are more aggressive or intimidating to non- knife-ppl (not conducive to being low profile). They are legal in fewer jurisdictions, heavier/bulkier on average than conventional folders for a given blade size due to the extra mechanisms involved. And less rugged than conventional folders when both are built to the same quality due to more complex and delicate deployment mechanisms. Basically all OTF knives are good for compared to assisted opening folders is being more "tacticool", and retracting faster if it's double action.

[@Ureyeuh]

"It's griptape dad!" *rolls eyes* lol

[@FloridaMan1976]

Bought a small Hellytec hellion from a coworker about a year ago and it's been a great knife with lots of use. It does come off track every now and then when I push it out. Would be my luck, for the lack of better words, fail to fire if I needed it in a life or death situation. But for 50 bucks, it's a box opening assassin at work.

[@batperson3532]

Soon they'll be making fingerprint-activated OTFs.

[@jerryvelasco1474]

For some of the prices "3000$😵" you'd think that was a feature already.😒

[@johnt.70]

I would be all about that if the fingerprint reader was reliable and the battery life decent. I think the battery life would be the tricky part.

[@BadInfluence433]

I bought a benchmade infidel military/le OD green from these guys. Great knife and blade locks up very tight. Super sharp D2 steel outta the box. Would recommend to anyone wanting an OTF. Thanks blade hq

[@pops55650]

The guys making the Hawke Deadlock would make mint if they made the knives in the Microtech and Benchmade price range. $2000 ??? No way. I can buy a real nice handgun or rifle for that.

[@TheGreatHotDogConsumer]

I got four sawed off shotguns for $2k. One for my wife, me, my best friend, and my best friends wife (we all live in the same house, different floors)

[@austinp7866]

I could buy a frickin 308 for that price

[@edwheaton7759]

As an OTF fan, just found in my feed. I own the Halo V and no need to push the button to reset. Great content, always looking for alternatives to Microtech. Cheers.

[@the6cow6god6]

WHY TF WOULD ANYONE WANT A SINGLE ACTION KNIFE LIKE THAT?!?!?!?!AM I MISSING SOMETHING?

[@brandysigmon9066]

I have the AKC F-16 and it is a great knife, I bought one for my buddy and he loves it too. It's a nice solid knife, $44.95 you can't go wrong with it.

[@justandordinaryjoe4542]

Seriously guys $435 for a knife I rather buy a S&W M&P 9 and a $20 knife!!!

[@AIbot21432]

Good things cost money, you can buy $1 pens that writes or $100 fountain pens that feel like you are writing on a cloud, It just depends on how you justify things.

[@pipetman4645]

You can buy like ok quality ar15, $50 quality knife and whole fried chicken lol

[@rlanger3108]

Cool. Whats your point.

[@pushupman6479]

My 5 dollar handforged 7 inch knife would outlast any of these overly expensive SCAM knives.

[@NitrogenEyes]

What i love about the microtechs is the handle to blade ratio. The handle isn’t massive for a smaller blade

[@joeyroose3820]

Need a UTX-70 in my life

[@akui88]

i heard from microtech, they will begin making a small batch of utx-70's in a few weeks. they just shipped out the new halo 6 to dealers this week! (I think they will also bring back the regular troodon later this year, i think, not confirmed yet).

[@bhunt919]

Can't go wrong with ultratech I love mine and the protech dark angel is very nice too.

[@angrybasque]

That Deadlock is AWESOME!!!!

[@evanshaw6123]

Sure it is. All hand made and machined. Lifetime warranty, and top materials. Carbon fiber handles and titanium frame and inlays. Special spring design to last over 200k cycles. No blade play at all thanks to a very special design and mechanism. Not to mention all the R&D that went into creating it. When most other “good” otfs out there like Microtech are $300 or more, and are no where close to the quality of the deadlock, not to mention they are made to order by hand in incredibly small batches because they don’t have the industrial capabilities to mass produce them, then you start to get the pricing. Its a very special and unique knife with top quality materials from some of the best knife designers of all time.

[@AquaTech225]

Evan Shaw still even the microtech way over priced. It’s people like you that drive that stupidly high ass priced market an keeps pushing some higher. Money in your pocket or not. At some prices it’s just fucking stupid

[@liamkelly213]

When zack was talking about the akc f16 and said “reminds me of 15 year old zack skating around” I was like yep that’s an exact description of me I’m buying it

[@burger-knifefrinkle1728]

o.t.v.- out the van goh. double action ear cutting paint brush.

[@03_austindrake88]

That G&G Hawk Deadlock is absolutely awesome! The blade play is why I've never bought an otf. Hopefully more companies start following the Mad Scientist's.

[@raiderfandew]

So.... what's the BEST double action, OTF knife for UNDER $50.00? Preferably with BLACK polymer handles.

[@tyler351]

Not many for that price point I would just go with a ravencrest for a little over $100 and it comes with a lifetime warranty or you can just get the spare parts yourself but if anything ever goes wrong literally nothing will make the warranty go away so you will have a knife for life that is a great build

[@GGwasEZ]

The schrade gen 2 and 3 are actually exteemely easy to take apart and maintain. Under 10 parts, every part has a different size and a different area. For the most part, you can dump gun oil or wd 40 down the rail and its gopd as new.

[@jojothermidor]

Ffs, can I get one knife that isn't hundreds of dollars, and is available online?

[@rxdoom1194]

Ultranationalist Kershaw launch 4

[@Hey_you_______x]

Ravencrest tactical has a few for around 99.

[@arizonatea3734]

Gerber crkt and kershaw all have great options even $60 or less. I have some spring assisted, folders and fixed blade from all.

[@rlanger3108]

You didnt watch the whole video did you.

[@wesleywarsmith1113]

Best thing to do is Knife shows in the Midwest or Country.

[@CR.CZU2X369]

Thank you for the video guys!!! Love your enthusiasm for what you do! Great video not too long with just enough info to assist in what knives I will add to my collection!

[@ar-sithf.austin3744]

Great OTF discussion, quite informative. Def going to have to go with the Deadlock, but for two grand I think I'll have to buy a DSA SA 58 OSW rifle 😁

[@paulstone1912]

The SOG PENTAGON OTF is the Cats Meow. Awesome lockup

[@CenoteElevenOne]

I wish this review answered questions that i have, like durability, could i stick it into some wood and it not break etc...

[@Durablesilver]

honest to god yes you can for microtech at least, there are torture test videos of people using them like a nail and hammering them through a 2x4 and then pulling them out and they are just fine.

[@kc8767]

12:45. Hit the wrong button and you will slice someone’s cigarette in half. 🤣😂🤣

[@rlanger3108]

PRANKED

[@eliasburgstaller4544]

5:48 That firing button looks like it was designed by a kid who plays minecraft.....

[@user10957]

elias burgstaller yeah

[@marcuszarafonetis6544]

elias burgstaller good warrenty though and great company

[@tfr6]

its actually very effective.

[@RonSpilker]

lol totally missed that, but you're right!

[@Daud76]

My first encounter with an OTF (what we South Africans refer to as a "switchblade") was with a Nato Military. Cheaply made and had a shoddy blade too. I much prefer the vintage Italian flick knives that still (mostly) flick with lightning speed to this very day.

[@eddieking2976]

I think there would be lucrative opening in the remake of vintage OTF knives. Say from the 1980's etc.

[@ascaye]

I have the AKC F-16 Which I bought from Blade HQ and it cost me about 60 bucks about a week ago. But it does not make that ping sound when I open or close it. This one is in the dagger point style. My only complaint is the button should be textured. My thumb frequently slips off of it without deployment. This one has the 440A steel. For whatever that’s worth. Nice little knife.

[@rb3782]

When they pulled the Halo 5 out I was like “did your kid make that one?” And then they said the price. That’s just silly.

[@stevemartini470]

Its very good quality but its single action so not useful but a decoration

[@cmac1100]

I didn't know there were that many OTF knifes period...

[@primaryjuice8400]

Chance Rogers that’s the dumbest thing I’ve ever heard period...

[@cmac1100]

SPIN & OUT ok?

[@primaryjuice8400]

Chance Rogers hey sry my lil bro watches these he thinks he knows everything

[@cmac1100]

SPIN & OUT no problem. Hopefully he grows out of that lol. Could get him into real trouble someday by someone more ornery than me haha

[@primaryjuice8400]

Chance Rogers lol sry bout that

[@persianchris2451]

I looked away for a sec.... when I looked back.... It looked like a bunch of hot wheels on the table. Cool video, thank you!

[@patricksmatrick6193]

"They feel like a $40 OTF" ...yes, they certainly do lol

[@jabrahamlincoln2360]

Love the videos I’ve been watching for 4 or 5 years

[@yarranfit]

Otf is a switch blade btw

[@ItsMe-go9gl]

no it isnt, do your homework.

[@jackofalltrades7469]

It is a stiletto, not a switchblade.

[@ryewhiskeyfan5946]

Re-watching this video to refresh my mind on OTF's as I am considering a purchase. In shopping around online I came across Ravencrest Tactical . A lot of mixed reviews and info. American made vs Chinese or both. Don't mind spending $200.00 to 300.00 on a quality USA made product but on imported junk.

[@PJDuffield]

This video makes me sad knowing all of these are illegal in the UK

[@rebellucy5610]

And did that reduce crime?

[@joekerr4273]

sweet home Alabama

[@benewell4162]

I really like ZT knives. My fave EDC is 0566BW w/ELMAX. I love it, light, perfect size, crazy cool steel; not hard to sharpen and holds an edge like no other.

[@michaelmoses4019]

No lightning? That's like the number 1 best budget otf

[@ryanmosley8250]

You know the website?

[@orendz7740]

How dependable are OTF knives? Yes they look cool and tactical but do they work well being worked? Not talking about taking them out into the woods and beating on them but for every day use maybe in dirty conditions with dust etc

[@hasslevania8138]

I "use" an akc f16. In my mind it is the perfect knife. Good F&F. Inexpensive but not "cheap". I wouldnt be lost if it broke or got stolen. Easy to replace. But I know when using that I wont be replacing anytime soon. Blade sharpens easily and holds a decent edge. Let's not forget that otf's are good for opening packages and people lol.

[@tilleypatrickpt]

OTF means out the front, yet all these knives come out the top. Consider my mind blown.

[@tilleypatrickpt]

@Joe Blackner I have no idea what that means. I assure you that I'm not the only one.

[@jerryvelasco1474]

Depends on how you use and hold it. If you are let's say an assassin and cut and stab people. You'd polly say OTF. But if you are a regular user and have more knifes than you need. Mostly for admiring and looking at them. Then OTT makes more sense.😙 just my 2€

[@prescott123able]

I had my viper for years now and no problems

[@NavajoNinja]

*"LIGHTNING" OTF DOUBLE ACTION. $30 AND WORTH EVERY PENNY.*

[@MrCoololdman]

Yeah, for the price 300$ those knives are no more than just expensive toys for men

[@luceatlux7087]

when they were talking about the Hawk and they said, "two," i thought for the only millisecond i've ever considered in my life, in regards to buying an expensive knife, "wow. okay, i might actually pay $200 for that one. i like that a lot!" then they said, "G." yeah, i'll stick w my $30 Lightning with the exact same basic parts. i'll cut, hammer out, and heat treat my own damn steel for 2-3 thousand dollars... idk what's costing that much... is the blade made of real kryptonite or something? can this knife cleave dragon's scale, like Erdrick's sword?

[@theancientcitycontinental2178]

I love my infidel. Best letter opener ever 😂. Hope I never have to use it for more than that.

[@willtrax71]

It’s cool you have to make sure you turn your thumb a specific way to retract your Microtech lol.. It’s exactly the reason I sold mine and purchased Benchmade Autocrat and Phaeton lol.. Semper Fidelis

[@YouTuber-sv7lk]

Love to own a good quality otf but I’ll just stick with my lighting 🤑

[@patrickhunt8567]

You should invest into a nicer ish one at least. Lightings aren't that reliable. I never used my Lighting for hard use and it broke within about 4 months barely cut anything with it. Then I got a equivalent to lightning which is the Titan OTF. Its decent but also still cheap I've had it for about 4 months now and its still decent but hard to open with the button its very stiff still. For Christmas im investing into a Microtech Ultratech for myself its a big step up lol 30-50$ OTFs to a 309$ OTF but it'll be worth it.

[@THEHOAG4]

Who would want a single action OTF?

[@amaggard14]

I was thinking about getting an OTF knife for my job, opening boxes in a major U.S. retailer, but then I thought about how I'm sure on the first day of bringing one a customer or a manager or even a loud-mouth coworker might see it, and it would probably end up pretty badly.... As much as I would love a knife that I can effortlessly open and close in one hand while I hold a box in the other, I think the consequences would be pretty severe if/WHEN I get caught....

[@jasonpettit9984]

So a 3,500 dollar knife and it's a single action,WHY!!!!????!!!

[@str0680]

vintage

[@CamoCollie]

@@str0680 "vintage"

[@joekerr4273]

"vintage" aka old junk that is handcrafted right when u order it aparently

[@jasonpettit9984]

@@joekerr4273 I'll never own one,especially when they have a double action ya know

[@owiewan0112]

I really wish OTF knives were legal in my state... they look so satisfying to deploy and retract