OTR performance code delete force regeneration derate delete red stop check engine light review

[@sharonmecabral3033]

I just purchased this tool on Thursday 11/5 and received it Monday 11/9 and didn’t pay extra for the shipping just regular cost. This was the next best thing I could’ve done next to buying my rig...so serious! My truck hasn’t been regening correctly because I missed the two times it tried to preform...was driving and had nowhere to pull off at! I’d began noticing the lagging in speed and pick up! The last straw was when I had 12k on me running 20 to 95 going to FL and was struggling doing 30mph going up those hills! So I did some research and read lots of reviews and decided to make the purchase before I would be forced to go to the shop! I read the instructions and watched this exact video before I did anything.did exactly as the instructions said and thought to let it run for the 3 minute system reset...then the actual regen!!! Let me tell you that was the best regen in a very long time...it ran for one and a half hours...I drove my truck and it was just like new again I could actually hear the difference...the best feeling ever! If your having issues with your regen you need to get this tool...it is a life & money saver ! Be safe out there drivers!

[@brankoperisic9212]

This tool has saved me thousands of dollars since I purchased last july. I have used this 7 or 8 times. It erases codes other than def codes. I had injectors harness codes and derate that I was able to clear in minutes and get load delivered and drive 500+ miles home and set appt for repairs. No time lost , able to work and NO TOWING BILL!!!! Even company drivers should have one. Can't afford waiting a week for dealers to schedule your repairs.

[@5FaLlEn5]

This actually works I use it all the time when we're away from home.

[@ericgrad4716]

Got mine 2 days ago n works really good.

[@feimohach]

Francisco thanks brother, I bought the otr performance through you I save a 100 bucks , thanks brother

[@NoxidZ]

Seem good ill keep in mind for my family & friends 👌

[@jorgenunez1825]

Francisco show them with a truck that’s in engine derate mode with the common spn1569 code SCR light on. That’s what they claim it works on. People trust you don’t take free stuff from sponsors with out trying it out first.

[@abdirizaqfarah5370]

Great vid

[@HeWhoLovesTheWorld316]

Damn nice 👍🏿

[@UniversalContentTv]

Buen día Francisco Amaya Tengo un 2019 Kenworth t680 automático con motor isx15 Cummins y compré un otr reset tool de esos q estás mostrando y solo puedo delete los códigos pero nunca e podido hacer force Regen y estoy siguiendo los pasos q me dice pero no tengo los resultados q crees q estaré haciendo mal. Espero su respuesta gracias Cordialmente

[@rickysons6362]

Do you do ecm programming

[@adamabdullah4829]

Hello Mr Francisco, I want to change my DPF on my freightliner cascadia, do you know that I can complete all the job with this diagnostic kit? Your answer important please, I watched your video how to clean DPF, and you have entered the DPF serial numbers on your software, can I do it with this kit as well? thank you for your videos, everything is so helpful and very clear!

[@mr123rambo]

Where u click to purchase

[@quocbinhduong-pv4ef]

thanks anh amaya.

[@mustafebihi9178]

francisco where is your shop i want asking u question

[@dlighty]

Question, I purchased the device . 2013 Cascadia DD15. Truck seems to be running fine but 50-75 miles after resetting I get NOX CONV EFF 18 code. I purchased the truck with 470K I now have 700,683 miles. Not sure if I need to clean Dpf filters to resolve this issue. I replaced the inlet NOX SENSOR before I bought this device. Any advice would be greatly appreciated. Love your videos. Very informative.

[@ericgrad4716]

Have u tried doing a forced regen.

[@edwinramirez5850]

Replace the outlet nox sensor

[@glackaglack1534]

So it deletes code but doesn't let you know what caused the problem or if the problem is fix ?

[@williamwhite7914]

It seems simple how it work But that I wonder if it work on 2012 ud 2300lp

[@sofistk8ddd1]

How much discount will I get if I use the “Francisco” code to buy the Detroit version device?

[@abdirizaqfarah5370]

Thank you

[@LostaVision]

Will this work on the 6.7L Cummins that is in the Ram 2500 and 3500?

[@joytrucker5709]

Have you tried using the Nexlink NL102 Plus? Would you recommend it over the OTR Performance?

[@franciscoamayaYT]

I haven't tried that. But I will to see the results

[@leonardfrutos5346]

I have one of those and it works okay it can be a little tricky getting it started but it works as far as regen goes and it works . It says it could be used with paccar and Cummins too and one other motor I forgot which one it was. But it doesn't erase codes at least I've never tried to use it for that I've only used it to regen. You can use it on your car too find codes and stuff like that and it will tell you what they are . But if the videos are correct in this KZbin video then I would say that the OTR solution thing works a lot smoother than the Nextlink as far as the regen goes

[@joytrucker5709]

@@leonardfrutos5346 I tried the Nexlink. Don't waste your money if you have a Cummins ISX15. It will not do a regen.

[@leonardfrutos5346]

@@joytrucker5709 That's what I meant. it can be a little tricky. When I first got it , it wouldn't work but I kept trying it. And after about 10-15 minutes of messing with it , it finally started. I got a cascadia Freightliner dd13 and I can say it works on that I've never tried it on any other motor . But like I said it's a little tricky getting it to work. But this OTR one seems to work a lot smoother getting it started. Well at least that's what it looks like in the videos 🤔

[@evergreenxpress595]

Hey Boss, I have a SPN 1231 code. Truck shut down after 30 seconds of starting. It has some to do with the ACM not communicating. Do you think this can clear the code so I can drive to the shop instead of paying for towing?

[@evergreenxpress595]

It’s a 2017 DD15

[@franciscoamayaYT]

This could be a wiring problem or water in the system

[@adriantalonia4721]

Cuando borras como puedes ver las fallas cuando vuelve aparecer la luz i la falla como ves los códigos

[@fredydiaz1440]

Yo nesecito uno de esos, para un volvo 2013

[@baatarsan]

Hi. I purchased for cummins engine,now i have dd15, it’s work for dd15?

[@franciscoamayaYT]

No, for Cummins is different

[@baatarsan]

thank you!

[@anyimiguel]

help. ayuda . what should i do with this error .mcm reported ash mileage is lower than the cpc stored value? error code247

[@edgarperez7621]

Ju told me ju love me, but JULY to me.

[@murun7332]

I’m on the road now and getting codes new Spn521052 fmi31 Spn 3509 fmi 4 Spn 3563 fmi 4 Pretty sure it’s harnesses but to start from? Freightliner Cascadia 2017 JF6421

[@SalomatQalb]

Why not buy nexlink nl102p which is much cheaper?

[@ray7997]

Francisco where is your shop located im having some issues with my cascadia

[@originalyummer]

What engine do/did you have? I'm concerned if it will work on 2019 paccar

[@sonxairasakhamdee2178]

Francisco can you accept me as your Apprentice bro!! I wanna quit trucking and learn how to fix simi truck like you!! 😁 Love all your videos man👍🏼👍🏼

[@realistmw]

Si senoir

[@DPG_LIVE]

I got one and it's never worked for me maybe I didnt use properly but I'll try again

[@tbren9341]

Cascadias SUUUCCK!!! It’s like gambling. You gamble with a $2000.00 truck repair to keep your truck running, but as we know the house always wins. The house in this case is Freightliner. So much money to keep your truck out of derate. Hope this product works🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️

[@serggla924]

All emission trucks suck. Cummins is who makes the emmision system for Cascadias anyways

[@badguy2419]

Small price for a big "piece of mind"

[@marvinportillo18]

Cuanto cuesta

[@fredymosquera7197]

I have one for sale $300 plus shipping cost For DD15 motor.

[@YungEStad]

Still have it?

[@nonaxariis661]

Tomuch 500 next time

[@TheBone40]

Hack Daddy - Official - tow bill is 900 by it self

[@nonaxariis661]

@@transport21 I'm waiting got drop to 300 then I pay ,lol

[@nonaxariis661]

@@transport21 3 years a go people going to taxi fare was 2:50$ per mile ,and now uber and Lyft 7 mile 5$ ,my point is i wait to drop 300 and you have 2 option reset your freightliner cascadia for free ,option 1 is your key and option 2 is bypass and go to shop ,lol

[@carlosbatres2643]

Español

[@osvaldomontesdeoca]

Ah que mal plan que este todo en inglés..

[@jorgefacio690]

tiene un video en español busquelo

[@verajavi12]

Esa heramienta es como uso de mantenimiento especialmente para camiones de viajes en El pueblo.este aparato solo funciona en un camion ke no tenga codidos.solo borra los codidos pero no arregla Los codidos.