Our new 5' CountyLine Rotory Cutter.

[@ellobo1326]

Glad to see that it will turn a 5 foot cutter with no problem. I have a 4 footer I’ll be using with my SA325.

[@billcooper54]

I just did 3ft fields with 5' no issues, same tractor

[@Moosepuck123]

Thanks for the details and no bs video….picking up a 5ft today, they’re on sale…yay!

[@dennisgood1997]

Nice video. I just got one of these a week ago. Had to cut 9 inchs off the pto shaft. Went through set up just like you. Only did a test run worked great!

[@97TRAKIN]

Thank you for the comment. What tractor are you running it behind?

[@dennisgood1997]

1953 ford with a pto adapter

[@nelsonmartinez2907]

I’ve read that the cutter requires 25 hp and the yanmar only has 18 hp at the pto. I’m in search of a brush hog now and have that same tractor.

[@97TRAKIN]

@@nelsonmartinez2907 I've run this cutter for almost 2 years now and it and the tractor hasn't skipped a beat.

[@97TRAKIN]

@@nelsonmartinez2907 According to the manual, the 5' rotor cutters are rated 20-50 PTO hp.

[@97TRAKIN]

@@nelsonmartinez2907 I also run this cutter behind my John Deere LV4010 which has 14 PTO hp and it does great.

[@travisricks3436]

That rotary cutter does an excellent job.

[@MikeOrazzi]

It does a nice job.

[@travisricks3436]

What horsepower Yanmar is that?

[@ozarklanding]

I also read my sa425 manual and use the same procedure. I’m new to tractors.

[@subixbarbarasson6052]

Great video. That traktor is pretty badass too. Salute from NorKal dude.

[@chief1193]

I just got the 325 and I saw a video of a guy complaint about the PTO noise I also do mine like the manual said which is the same as yours and mine ran smooth as well.

[@antcali1]

Thanks for posting !

[@billcooper54]

Keep bucket lowered to help push down plus make sure you do 50hr service on these tractors! I just did mine oil thin and dirty!

[@97TRAKIN]

Check out my videos on this tractor and my other tractors and equipment.

[@jesuszuniga2375]

Great video and the good explains

[@michaelvoland3625]

Good Job! good info.

[@jakeschisler7525]

I have about the same mower except the back of mine isn't rounded. The top link on mine is made different. When I turn on the PTO it is at idle and then I bring the throttle up to speed. On mine I had to put the lower pins on and when I did i didn't have the right socket to tighten it. I had one vibrate loose. So i bought a socket and used blue loctite with impact gun. I seen a video where the guy using it that bolt fell off and he then had a issue. I would think that you really don't have enough horsepower at the PTO, since all tractors loose horsepower from what the tractor has.

[@berlinjackson1847]

I really like your videos. I am also have a yanmar tractor sa-424 which is a 24hp engine. I need to get a brush hog and dealer told me to use a 4 ft brush hog. He said a 5 ft would be straining the engine? But your 5 ft seems to work

[@lilmama4426]

This may seem like a dumb question but we are learning (just got a new 39hp tractor) we couldn't afford the $3000 towards the tractor brand bush hog but we learned (after wed already made the purchase) that we couldn't put any ole bush hog on it, needs to have a slip clutch. We are looking hard at this bush hog but can't find any info about it, does it come with a slip clutch? Thanks for the video!

[@97TRAKIN]

You want a slip clutch or a shear pin/bolt setup. This brush hog uses a shear bolt.

[@lilmama4426]

@@97TRAKIN Thank You So Much for your help!! I'll pass that important info along to my Husband. Thanks again!:)

[@damonr2233]

Doesn’t look like that cutter is equipped with a pivot for the top link??

[@97TRAKIN]

It is equipped with a pivot 👍🏿.

[@andrewseamans1419]

One year later how do you still like it?

[@97TRAKIN]

I like it, no issues. I don't abuse it but I am HARD on it, I don't baby it. I take out trees with this thing. Check out some of my videos in my "Tractor" playlist.

[@swappedoutZ71]

So its a rebranded tarter unit? Well guess ill buy direct from tarter then lol

[@97TRAKIN]

@@swappedoutZ71 yes. All my Tractor Supply implements actually say Tarter on the stickers.

[@jesuszuniga2375]

Thank you

[@Sam-pw8zh]

Is that a 25 hp trackor?

[@97TRAKIN]

Yes it is a 25hp tractor. It is the Yanmar SA324. I also run this rotary cutter behind my John Deere LV4010 which has 19hp.

[@MikeMatkin-of9iy]

Looks like your top link is not hooked correctly. Should be attached to a swivel plate, not directly to arms

[@97TRAKIN]

@@MikeMatkin-of9iy It's hooked correctly 👍🏿, but thank you for your concern. You can check out the video where I put my cutter together to see how this one works. Not all use the same type of setup, so not all will "look" the same.