Outdoor Tables for the Adirondack Chairs, Coffee Table and End Table

121 - Outdoor Patio coffee table and end table and How to Make Money Woodworking
Detailed 3D plans available here: kingsfinewoodw...
_________________________________________________________________________________________
Things I used in this build:
Magswitch Universal Featherboard Pro - 81101303
mag-tools.com/...
Magswitch Vertical Featherboard Pro - 81101302
mag-tools.com/...
DeWalt Sander amzn.to/3eB8k5c
I also used a Festool sander: amzn.to/3MIuSAT
Belt Sander amzn.to/2GF56B7
Palm Router amzn.to/2Ik9Ixe
60 Degree Chamfer Router Bit amzn.to/3vzOcui
45 Degree Chamfer Router Bit amzn.to/3s6slZi
Drill & Impact Driver amzn.to/38nvta8
Drill Bit set amzn.to/2IgxpXp
Stainless Steel Square 8"x5.25" amzn.to/2U2NceP
Stainless Steel Square 6"x4" amzn.to/2U7A1JE
Countersink bit amzn.to/36d3Xti
Clamps amzn.to/3ezyt4s
3” deck screws amzn.to/2U5df4V
2-1/2” deck screws amzn.to/2IfQ7yq
Blunt needle tips amzn.to/39yjU2G
20mL syringes amzn.to/3vAAqYm
Epoxy - quart sized kit amzn.to/3OR2M8u
Epoxy filler/thickener amzn.to/3793ooZ
12 boards - 2x4-8' needed total for both tables together
And here are the some other things I use in my shop: amazon.com/sho...
_______________________________________________________________________
Video of How to Build a Miter Saw Sled
• 39 - Extreme Crosscut ...
_______________________________________________________________________
_______________________________________________________________________
Video of How to Build a Tapering Jig
• 29 - How to make a Tap...
_______________________________________________________________________
How to build the Thor’s Hammer Woodworking Mallet: • 16 - How to Make Woodw...
Or buy your very own Thor’s Hammer made by us: kingsfinewoodw...
_____________________________________________________________________________________________
This video is about how I made money, and advice I have given others on how to make money doing woodworking. I am centering the video around a project build because that will make it more interesting. It also happens to be a very important project for making money. I actually paid much of my way through college by doing woodworking, and I have also helped many others do the same.
The build itself is a new style of Outdoor Patio Tables that I designed myself. It is an elegant design with lots of angles, yet even with these it is quite easy to build. I have also designed the set of plans to allow the end maker to use 2x4 lumber.
This is a very detailed build video, and much of it will be focused on perfecting the details of a salable piece. And some advice that can hopefully improve your woodworking if you are a beginner.
Link to the KFW Community Woodworking group. Share pictures of your work & get help if needed. Join our King’s Fine Woodworking Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools. / kingsfinewoodworkingco...
If you would like to help support our channel, there are a number of ways. One way is direct support through Patreon: / kingsfinewoodworking
You can also help without spending anything, just by liking and sharing our videos. Thank you for your support. We love teaching the world to do woodworking.

[@KingsFineWoodworking]

Can everybody who watches our videos take a second and *hit that Subscribe Button and the Notification Bell* ? *More than 82% of our regular viewers aren't Subbed.* We would really appreciate it! Thanks!

[@Theexplorographer]

Been subbed for years. Don't feel bad, 99% of my views are un-subbed. I think YT's #'s on that are hosed.

[@KingsFineWoodworking]

@@RazaXML, no worries. But just so you know, subscribing has nothing to do with ads at all. Ads are shown either way unless you pay KZbin to remove them. I have to watch ads before & during every video too. :-) When our subscriber count increases, it just helps other outside companies invest in us as content creators. Like we might get discounted glue from Titebond etc. But I get where you’re coming from. You definitely don’t have to subscribe to anything. We content providers will put videos out for free either way. We enjoy doing it. Thanks for taking the time to comment.

[@tomdaichendt9013]

It is terrible and reprehensible that google punishes/penalizes content makers for what is human nature.

[@crustycurmudgeon2182]

@@KingsFineWoodworking and @RazaXML -- Had to get a new laptop to replace the one that fried in my little shop-- bought the cheapest they had. A bit after I got it, I was watching YT a lot and got a pop-up thingy asking if I wanted to block all ads and pop-ups occurring on Firefox. I was more than a few beers into a good night and went for it. It was free, asked for no credit card info, and wasn't an "introductory" offer. Over a year later I still get no ads on YT or idiot pop-ups on Firefox. My old laptop had something close, but not as good. Sorry, got no idea what it's called-- had a buzz on.

[@moldorm30]

Still don't get the trend with people talking about the subbed vs not subbed thing. It literally effects nothing. And if people wanted to subscribe they would.

[@horatiohornblower868]

Every time I watch a video of yours it always strikes me that you are not only a seasoned craftsman but above all an excellent teacher.

[@KingsFineWoodworking]

That’s very kind of you to say. Thank you.

[@tree_carcass_mangler]

@@KingsFineWoodworking If you had been a chem teacher in my high school I might have learned something. (Then again maybe not - I was a terrible student.)

[@abbyhoffman1]

I'm honestly in awe of him and the level of engagement and support and love he's instilled in his children. Incredible father

[@kamac1980]

Couldn’t agree more. Companies should hire this guy to make instructional videos. Thorough, covering important details, easy to follow, but doesn’t bore the audience with needless details. That’s a very difficult balance to strike.

[@BrenQ99]

Your attention to detail is impressive. Chamfering spacer blocks? Next Level!!!

[@jmarkes02]

Wow. Extreme amount of detail but a really nice table top.

[@michaelmiller1109]

So glad to see you posting again. Your still my favorite content creator.

[@brianpage36]

Made the end table 2 weeks ago. For my personal use. My wife wants it but I have my morning coffee on it and am not willing to give it up. Your little end table is just great! I made the top with proper mortise and tenon joints. Not too hard but the redwood I am using has lots of sap and I got a lot of smoke while cutting mortises. I will use this method again for my friends and family. For the mortise layout, I just cut all of the slats, put the tenons on the ends and laid them out with spacers in between, on top of the edge pieces. Full actual size. I just traced out where the mortises were to be cut. Done. No measuring or errors. 3 Coats of marine varnish to finish. I have designed a King's inspired simplified small table top with just spacers in between slats and no joinery. The base is really simple without the 8 degree splay on the legs and eliminated the leg taper. 75mm x 34mm legs still kept at 45 degrees. I built a jig to hold the corners while I screw the reinforcement pieces in. No pins or nails. Just Titebond III and 4 x 4.5mm screws in each corner. I have 3 done and will list them on Amazon on Monday (after I finish them). Owatrol Aquadecks as I can get 3 coats wet to wet on and have a 4 hour dry time. I had 8 sample finishes outside in heavy rain and hot sun for 3 weeks. I picked the best looking. I can finish and ship the same day. I reduced the size of the table slightly as I can ship 59 x 60 x 60 cm for £14.95. 60 x 60 x 60 cm costs £49.00 so that 1 cm makes a huge difference. Now I am having fun! I really missed working with West System epoxy... Thanks again!

[@carlmainwaring4349]

60 degree chamfer to 45 degree chamfer is such a cool idea. Looks really cool. Thanks so much for sharing your knowledge with everyone!

[@quadsquadracingable]

Glad to see this! I'll get the plans this week! Loyal fan and customer here!!!

[@KingsFineWoodworking]

Hi Jeff, Thanks!

[@quadsquadracingable]

Absolutely!! Thank you!

[@brianpage1886]

My coffee table is finished. I learned a lot making this table and used almost all of the tools that I own. My clamps slipped while the epoxy on the table top was setting so one of my mitred corners was messed up. I hand planed the outside to make it look OK, but the inside of the joint looks wonky. My wife wants this one. I will start making an end table. I have a mortising machine that I have only used a few times. I cut a 1/2 test mortise and made a mock up using a spare slat I cut. I think there is some potential. It will take longer to mark and cut mortises than cutting a dado, but the mortises may save time (and mess) when gluing up. I will also take a little off the sides of each tenon to lessen the chance of any glue squeeze out being visible. This project has 'Domino' written all over it. A Domino would make child's play out of the slatted tops. I don't have one of those, but after building this coffee table I am half sold. The best thing about this table is the base. It is strong, elegant and very light. Everyone who has seen the table just loves the base. I am not sure about my chop saw. I set it up a few years ago, but I am not sure that the 45' cuts are still perfect. I checked them, but I am not happy with my mitre joints. With the size of the 48" top, the corners need to be really accurate. You guys make this build look easy because you have skill and patience.

[@chucknelson4556]

Miss you and your family James

[@kevincain2697]

Just love the look of the table and chairs.👍👍👍👍

[@philip1522]

Been "commissioned" (life long non paying friend) for some outdoor furniture. Definitely going with your spring back Adirondack Chairs and at least the long table shown here. BTW long time subscribed viewer so I'm aware that your family help out but still smiled when you grew an extra arm (4.20). Can't tell you how many times I've needed one of those!

[@leecarter2768]

Your channel inspires me. I can tell you do allot of your work sitting, and as a guy fighting for disability with a bad back, these videos help me to know i can still do my hobby. I can work a lil then rest a little. Takes my a while, but it beats going crazy just sitting around. Your workmanship is top notch!

[@paulsylvester1394]

Looks like I am going to have to get going on a set of chairs so I have a way of sitting next to these fine tables! Love seeing the kids working in the shop. And the dog is cute too!

[@KingsFineWoodworking]

Thanks for watching!!

[@wes_d]

Bonus points for mentioning Bourbon Moth...he's funny in a weird sort of way ;-)

[@KingsFineWoodworking]

I definitely like him!

[@JohnWilliams-hn3wn]

I have been watching your videos for a few years and have picked up a lot of ideas and tips from them. I also have a wood shop and build furniture and cabinets but am always open minded when picking up so many great ideas and projects. Please make videos more often, your viewers miss your projects and craftsmanship. BTW I purchased your templates for the chairs and love them! Thank you!

[@christopherking2999]

I haven't seen your stuff in awhile. Glad I found this.

[@KingsFineWoodworking]

Awesome! I'm glad you found it too! If you could subscribe and hit the notification bell, you'll see when each new video comes out. We actually have about 15 - 16 videos coming out in the next 12 weeks. Thanks!

[@motopilot74]

Great work!

[@NorthWestAutos]

I subscribed to your channel long ago. You truly are a great teacher.

[@KingsFineWoodworking]

Thank you!

[@drzebediah]

Just recently stumbled on your work, ❤ the outdoor furniture - going to buy the plans as soon as I've got a minute to start something new. 😂 One thing I'd like to share, having worked a fair amount with cedar siding, shakes, and shingles... You recommend using galvanized fasteners with the cedar and red wood - and galvy is def more rust resistant outdoors or w/ AC2 - but it reacts badly with cedar, and will develop ugly black streaks. I would specifically recommend only stainless steel fasteners for cedar and red wood. But, I'm only a hobbyist, and that's only my two cents, for what that's worth, lol. Keep up the good work, I'll be working my way through the rest of your library. Love the way you teach.

[@jasonsiebold]

New to the channel but agree with these other comments. Your are a great teacher and craftsman.

[@KingsFineWoodworking]

Thank you. You are very kind.

[@RDAUGIRD]

Those are nice enough for a living room.

[@KingsFineWoodworking]

Thank you. You’re very kind.

[@TheSirStu]

That's a great looking set of tables you've created there. Very impressed with the finished look of those, the taper on the legs particularly looks great. Definitely looks like outdoor furniture very sleek and stylish 👌

[@mykolashatkovskyi8817]

Amazing level of thought and mastership put into each and any detail - just as usual. Thank you for your great video.

[@KingsFineWoodworking]

Thank you. That’s very kind.

[@shaynesabala]

I am really enjoying your videos. Thank you for taking the time to give such detailed instructions. Please never stop showing mistakes and how you fixed them. I wanted to ask if you put a finish on this. Again, thanks.

[@zachariahzeilman1978]

I was starting to worry if something had happened to one of you guys because you hadn’t posted a video in so long. But I’m absolutely ecstatic that you have posted another video. You guys for sure are my favorite channel

[@KingsFineWoodworking]

Thank you so much!!

[@BroRiv]

Fantastic video King family! Just pure genius!

[@KingsFineWoodworking]

Thank you! That’s very kind!

[@deanwellerassociates]

A lovely piece by a master craftsman. Detailed editing and compelling narration. Something one can aspire too.

[@danasoiett998]

Your projects always look so professional. Enjoy your channel very much.

[@KingsFineWoodworking]

Hi Dana! Thanks! That's very kind.

[@arnoldolorenzo3474]

You’re truly a master. You make it all look so easy.

[@KingsFineWoodworking]

You are very kind. Thank you.

[@T4BCSY]

Nice design James. I like the extra little details.

[@samsite83]

Putting the feet at 45 degrees and making them thinner really made this table stand out compared to other tables i have seen :D Great idea :D

[@KingsFineWoodworking]

Hi Stefan, thank you!

[@brianpage1886]

Just purchased the plans that accompany this video. Great detail and value. Thank you very much!

[@KingsFineWoodworking]

Thank you!

[@juliahelland6488]

Great tutorial and amazing tables. Thanks for sharing this!💯

[@rimert]

I have not been impressed using 2x4s to create furniture, not even outdoor furniture. The use of chamfering in your design has completely changed my mind! Thanks! The elegant, nearly Danish style, has immediate eye appeal. I see only a couple of things I might do differently. One is to celebrate the joints by using dowels. I might also experiment with a different top rather than open slats. You really did a superb job! Thanks again!

[@johnkelly6942]

That’s a really nice piece and your narration/explanation was excellent

[@davidclauson5256]

Great video and glad to see y’all back.

[@KingsFineWoodworking]

Thank you!!

[@edcrego396]

Hay Jim I sure hope you didn't take me the wrong way I know that it must take an enormous amount of time making these videos ,, and I really miss not seeing more I have built three of your work table and wish I would have made these 20 years ago I believe we're never to old to learn something new thanks

[@KingsFineWoodworking]

Thank you! We are trying to ramp up video production this spring and summer to get back to a video a week! :-)

[@danielt9358]

I have built a handful of the non rocking King Adirondack chairs, now I will have to give the tables a shot. Thank you for the excellent instructional videos!

[@KingsFineWoodworking]

Hi Daniel! Thanks!!

[@christopherleenknecht920]

James great to see your back. Great addition to your chairs.I see that you are missing some helpers. Hope to see a new video soon 👍👍

[@KingsFineWoodworking]

Thank you! We do have a lot of videos planned. This one was just me and my youngest daughter Sai.

[@bennybischoff4913]

Love this design! Really nice work. I just got a bunch of free 2x4's and I think I'll build both of these. Thanks for the inspiration!

[@rogergladding7943]

Love this set. One thing I do with legs on outdoor furniture is make some hardwood, usually scrap Ipe feet which are better for wear resistance and stop moisture wicking up the leg.

[@KingsFineWoodworking]

Good idea! I often apply a coat of epoxy on the bottom.

[@jwbnscacpt]

Can’t wait to build this! Plans in hand

[@KingsFineWoodworking]

Awesome!

[@nore8141]

Your video is very informative and instructive…. Thank you 🙏 ❤❤

[@nicklarson801]

Looks great in pine, would look even better in Teak.

[@KingsFineWoodworking]

It would be spectacular in teak!

[@mauserkk98]

Very nice ,a fitting addition for some chairs.

[@KingsFineWoodworking]

Thank you.

[@woodworkingDad64]

Beautiful addition to the series! Thanks!!

[@KingsFineWoodworking]

Thanks Marcus!

[@theflourcity]

New subscriber. Nicely done. I admire your attention to detail, down to the grain direction of the dowel plugs.

[@chrisp.76]

Love these tables James! They are truly elegant. Will put these on my to build list.

[@KingsFineWoodworking]

Thank you!

[@woodshopnerdery]

Very nice, the extra design elements like the splayed legs add a lot of style. Kudos for putting in the extra work.

[@davidjanis1997]

I had bought the tapering jig and built it. Your video instructions and plans are great, Thanks

[@KingsFineWoodworking]

Thank you and thanks for watching!

[@frankrodriguez1977]

Love these, they are absolutely wonderful. Love the design as well. I will be getting some soon. Thanks James and Family

[@KingsFineWoodworking]

Hi Frank! Thank you!!

[@MCsCreations]

Beautiful, James! Fantastic work! 😃 The design is awesome! Well done!!! Stay safe there with your family! 🖖😊

[@KingsFineWoodworking]

Thanks! And thank you for watching!

[@lawrencejohnson3259]

Awesome project!!! Thanks so much for sharing!

[@GSB1231]

Beautiful ! Nice job - Thanks for great video

[@cliff5240]

Glad to see this video. Have been subscribed to your channel for several years now and have learned a lot! Always a good day when I see a notification for one of your videos -- happy to see you back!

[@KingsFineWoodworking]

Thank you! and Thanks for watching!

[@chow5997]

Love the videos. You have inspired me to try woodworking. Thank you for the content!

[@markkaes3144]

I get compliments on my bookcase all the time (your plans). Been wanting to make some chairs but knew I’d want tables to match… thanks!

[@KingsFineWoodworking]

Awesome! Thank you!

[@donrobinson5117]

Just watched this, beautiful tables!! I’m about to build a coffee table for my girlfriend’s deck and these look perfect. Plans have been ordered!! Thanks so much😊

[@KingsFineWoodworking]

Awesome! Thank you!

[@54mgtf22]

A glue joint is stronger than the surrounding timber. Agree 100% with your approach to the mitres.

[@KingsFineWoodworking]

Thanks!!

[@JohntheSchreiner]

Those look great! A nice companion piece to the Adirondacks.

[@KingsFineWoodworking]

Thank you!

[@eckhardkoehler3013]

This has a very appealing esthetic Nice work

[@KingsFineWoodworking]

Thank you. It’s not too bad for someone like me with no inherent creativeness. I like this piece as well. It was an exercise for me to see just how nice of a patio table I could make using only 2x4’s

[@eckhardkoehler3013]

@@KingsFineWoodworking Aced it! Very nice lines

[@johnklein4558]

Great job James and family helpers! Now I have to make these for my Aunt and Uncle because they have 2 of your Adirondack chairs I made for them!

[@KingsFineWoodworking]

Hi John! Thank you!! I think the kids rocker might be ready next week.

[@joeyleerobbins]

I am glad I am one of the 17%! Awesome knowledge and content shared on this channel! Thank you guys for all the work you put into these videos! God bless you all!

[@KingsFineWoodworking]

Hi! Thank you so much!

[@joeyleerobbins]

@@KingsFineWoodworking My pleasure! You know, subbing and buying from content creators is actually supporting small businesses which is the backbone of the American dream! People watching and gleaning knowledge and skills on KZbin should realize that it takes a lot of time and work to put together videos like you guy produce. They top notch video and audio quality along with exceptional knowledge and instruction. Not to mention the highly detailed pro level plans. It is an actual job to be able to do what you are doing and when I set down to watch a video I always think of how much you all have put into providing something that truly helps me personally. I hope you get a lot more subs and likes going forward because you and your family do a great service for everyday, normal people like me who want to try their hand at this craft. Thank you again my friend! Have a blessed day today!

[@ranger2316]

Love it. High quality and elegant as always. Thank you.

[@KingsFineWoodworking]

Thank you very much!

[@rogerhaney9043]

James, Now would be a great time to say you are working on a 4 and 6 place dinner table!

[@vectorius100]

Perfect work.

[@edwinwright8563]

Your skills are no better than anyone else's. My 10yr old granddaughter could put you to shame. You ain't all that! You aren't sh@t in your own yard. You are a legend in your own mind and no one else's!!!

[@kristilbilyeu7682]

If your 10 yo granddaughter can put him to shame, I’d love to see some of her work!!! I’ll have to disagree, however, about your statement that his skills are no better than anyone else’s. I don’t think I’m alone in saying that I hope to be half as good of a woodworker as James is. He makes it look easy because he’s such a great teacher, but actually doing the work is harder than it looks. As to your other comments, what are you so angry about? In all the videos I’ve watched of his, he seems to be very humble IMO. I’m wondering where you got the idea that he thinks he’s a legend, because I’ve never heard him say anything to make you think he sees himself as superior to others.

[@TimGebert]

jerk, why do you need to post this crap? Do you feel better? Where is your channel?

[@scottsweet4632]

Awesome, thank you for the great video, plans ordered, will finish up the rockers and get started!

[@KingsFineWoodworking]

Thanks Scott! Send us some photos when your projects are done!!

[@A5566z2]

Long time no see good to see your video's again

[@edcrego396]

I know your very busy but I firmly believe that if you would make more videos it would help alot nice work on table,s

[@KingsFineWoodworking]

Thank you, I will

[@j316finewoodworking6]

Beautiful as always

[@KingsFineWoodworking]

Thank you!

[@magemerlyn8887]

You do an amazing job explaining everything and really show the process. Thank you. It's appreciated.

[@KingsFineWoodworking]

Thank you!

[@playsball]

another great video! You really are an excellent teacher!

[@KingsFineWoodworking]

Thank you. You are very kind.

[@sosim846]

Nice work and simple....

[@johnlee7085]

Really nice design and execution. While you obviously have tons of experience, I believe if you check on epoxy, if you’re using it as an adhesive it is required to have the filler added. A cheaper option used in boat building is just sawdust. Similar to what you do to make the filler putty. As for wood expansion and contraction, it’s thermal e/c, so the more temperature change the more e/c. That’s just basic science. It’s great if you have not had trouble with it in your projects, but there’s definitely more outside where temperatures fluctuate than inside a more controlled environment. It’s one of the reason there are gaps in decking vs tighter fitting floors inside a house.

[@theblindwoodworker7850]

As usual another fine job it really looks great

[@KingsFineWoodworking]

Thank you!!

[@chrisjb2885]

Looks great nice design

[@nerminsoftic7385]

Excellent job !!!

[@phillipanthony9023]

I just got 30 1x12 old growth redwood from a fence built in 1913. They have aged beautifully with stain and moss. I'm making Adirondack chairs sanded with 60 and 220 leaving the distressed history bring out the aged wood dark color with linseed oil. Thanks

[@KingsFineWoodworking]

That sounds awesome!

[@Hazardman51]

Great to see another video

[@KingsFineWoodworking]

Thank you!!

[@pokershopmexicocarpinteria4553]

Very Nice work James I would like you make some video Talking with more detail about the contraction and expansion in the wood and forniture I have tons of doubts regarding that topic tyvm

[@KingsFineWoodworking]

Hi, I can do that. Thank you for the suggestion.

[@jaimelocklear641]

Very Nice 👏 Great Job 👍

[@1252PFC]

great built and video. thanks.

[@kevinbudke8438]

Very nice video. I'll be ordering the plans for these soon, to go along with the full size chairs.

[@KingsFineWoodworking]

Hi Kevin, thanks!

[@traceydysert6096]

Great video! Funny you mentioned Bourbon Moth because I just watched his video before yours. I was actually surprised, too. I have made several furniture pieces for my own home and don't use miter joints much. I will now! I'm definitely going to look for your videos on the Adirondack furniture. We need something comfortable for around our fire pit.

[@KingsFineWoodworking]

Awesome! Thanks for watching!!

[@michaelvenditti5982]

James you do work that is absolutely amazing,however anyone who has a SawStop and Fesstool equipment doesn't need Patreon

[@KingsFineWoodworking]

Thanks. If Patreon bothers you. Then don’t join. No problem. But you might be interested to know how KZbin works. I didn’t pay for the SawStop. I could never afford one. They put it in my shop so that viewers could see it. They didn’t pay me either. Many of the tools in my shop were given for use that way. As for the other tools, they are tools that I acquired over 37 years of woodworking. I’m not rich. I didn’t just run out and pay cash for these last year. It’s 37 years of spending on a hobby I love. Another thing is that nobody pays me to make videos. I do it for free. I do it because I have a good time trying to teach woodworking. We make a bit of money from some of the ads that come before the video. But that’s not guaranteed. Some months we might make $500, some months it can be over $1000, but some months it can be 0. We’ve had more months at $0.00 than non zero months. So we certainly aren’t getting rich here. I try to earn a bit of income by selling plans. Some months it can even pay all the bills. Most months it can’t. As for Patreon, I only created a Patreon page because a lot of viewers had asked me to do so. And in retrospect I’m glad I did. Because of them and the $300 - $400 we make most months, I can make many of the videos that you watch.

[@NicoSmets]

That looks surprisingly nice, coming form construction lumber.

[@KingsFineWoodworking]

Thank you. That was the primary goal for this project.

[@rogerhaney9043]

Very nice! I will order soon!

[@jaceks88]

Love the videos. Keep em coming.

[@steelfan3657]

Love these, they look fantastic!!

[@KingsFineWoodworking]

Thank you!!

[@grahamh1067]

beautiful work as always! I might just have to get a set of plans.

[@KingsFineWoodworking]

Thank you! and Thanks for watching! Here's a link if you decide to : kingsfinewoodworking.com/collections/project-plans-for-sale/products/outdoor-patio-tables-coffee-table-and-end-table

[@williamhanna5224]

Awesome video Great work !

[@marianosaab2560]

Great woodworking channel. New sub! I love the pace and detailed explanations.

[@jonathanporto7612]

Excellent video! Your ability to break down what you're doing is very detailed and helpful! May I ask, what type of wood were you using?

[@Sarge0311]

Very nice tables sir

[@softdorothy]

First video of yours I have seen. Very impressed. Using the chamfer to make the 2x4's look thinner fooled me, I assumed you would run the 2x4's through a planer somewhere in the video. I think I would have used the table saw to put the 60-degree chamfer - maybe I need to use my router more.

[@donaldchapman7503]

Awesome thanks

[@chrisswartzwelder8494]

I would love to work with 2x4 and 2x6 because they are inexpensive. The problem I had was they don’t kiln dry them like other lumber which makes them unstable to work with. I made a head board with them and I was constantly dealing with movement of the wood. Nice work I enjoyed the video.

[@markheintz1878]

Shop around when buying your. 2x4, 2x6. Look for a stamp that says KD/HT. Kiln dried, heat treated. That hopefully will end your movement issues. I know what you mean about wet would. A few years ago I bought an 8ft treated 2x4 for a shower wall bottom plate. I left it laying on the floor, totally flat and in 3 days it had a crown 3 inches high in the middle. It was like a sleigh runner. Hate to guess what it would have done in the full sun.

[@chrisswartzwelder8494]

@@markheintz1878 great info I will try that. Thanks.

[@meperson]

I really like the design and the video as well - great narration! The way you splayed the legs is cool as it still keeps the joint to the skirts non splayed. And if I understand it right dowels or dominos would go perpendicular to the leg surface just be offset from the face. And yes I am subscribed 😀.

[@KingsFineWoodworking]

Thanks! Dominoes or dowels would indeed go perpendicular to the leg surface. And they’d be pretty easy really. I just didn’t show it here since I was trying to make the attachment with a minimum of hand tools.