Outside in the Scotish weather 1cx630mm cables

  Рет қаралды 12,379

Jointech Cabling

Jointech Cabling

Күн бұрын

Пікірлер: 86
@garethmurgatroyd5447
@garethmurgatroyd5447 Ай бұрын
The One Man Cable Jointing Machine is Tony. This is propper electrical graft. Full credit to you.
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Cheers mate. Its takes a bit of hard work but the satisfaction at the end is worth it. Also the money is ok too🤣🤣🤣
@mikeselectricstuff
@mikeselectricstuff Ай бұрын
Hope you got to keep those offcuts!
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Would have been nice. Everything goes back to the yard on this job.
@AGRElectrics
@AGRElectrics Ай бұрын
@@jointechcabling9103 everything? 😉
@stefanovanenio
@stefanovanenio Ай бұрын
Ive been a sparks for about 15 years and never thought to use a rachet strap before!!! That 1mm T&E is no match for me now!!! Seriously though great vids.. i always get my apprentice to watch your vids for the tips
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Hahahaha they can be very stubborn at times the 1mils. Im glad hes watching, hope the videos are of some use to him. Theres some on tiktok as well. A bit easier to digest. Same user name
@Andy61-l7t
@Andy61-l7t Ай бұрын
amazing glad to see tradesman taking pride in there work 👏👏👏👏👏👌👌👌👌👌
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Thanks so much. I believe youre only as good as your last job.
@sergiofernandez3725
@sergiofernandez3725 Ай бұрын
That is some serious graft there Tony. Little thumbs up
@thedutchgamerguy8580
@thedutchgamerguy8580 Ай бұрын
Respecting the graft Tony! cheers from the Netherlands
@Chris_In_Texas
@Chris_In_Texas Ай бұрын
11:50 Tony, I think it might be time for a new safety vest! 👍🤠 Great job at that mess by yourself, ugh that makes for long days manhandling those cables.
@jointechcabling9103
@jointechcabling9103 Ай бұрын
I made a suggestion after reading your comment today and they have agreed to give me a nice shiny new vest. Im gonna get a couple made with my logo on too.
@Chris_In_Texas
@Chris_In_Texas Ай бұрын
@@jointechcabling9103 First thing you need to do is take it to the job site and drop it in the dirt/mud. You can't look like the new guy! 😁👍 We would always give the guys with the new hard hats all the crap on the sites as we knew they were the newbies. Yeah the logo on there would look nice too.
@albanliege4989
@albanliege4989 Ай бұрын
very good job !!!! I like very mutch your video !!!!
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Thanks very much. It was satisfying to get it finished
@godfreypoon5148
@godfreypoon5148 Ай бұрын
Good lord, he's got more circular mils than I've had hot dinners.
@blackindian9554
@blackindian9554 Ай бұрын
Once i ever did this type of work And those cables man handled me Needed 3 people to get this job done Meanwhile u single handedly do this. Love your work An i do like your equipment
@jointechcabling9103
@jointechcabling9103 Ай бұрын
I had a discussion with the supervisor, he said i can let you have someone to lend a hand. By the time id explained how i wanted to do the job to the other person i could have done it myself so i said thanks but im ok.
@AddyBittler-
@AddyBittler- Ай бұрын
And I thought fitting an inverter to a truck was me being a bad man 👀… this is heavy 🤯 good job buddy 👍
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Cheers mate. I dont think id know where to start by fitting an inverter. Auto electrics are a strange and mystical being for me🤣🤣
@AddyBittler-
@AddyBittler- Ай бұрын
@@jointechcabling9103 cheers mate thank you for taking the time to reply! 👍 have a nice weekend and safe journey back home bro. 👍
@LouBailey-r5f
@LouBailey-r5f Ай бұрын
nice neat work tony not the best working outside in the mud
@m101ist
@m101ist Ай бұрын
Thats a lot of work, working on your own. They are heavy cables to pull around.
@jointechcabling9103
@jointechcabling9103 Ай бұрын
It was heavy and, at times, frustrating, but i got it done and its good to feel a sense of achievement when its finished.
@davidmitchell5552
@davidmitchell5552 Ай бұрын
The one tip i can tell you working in Australia, when working in a trench fill the ground with hardcore, in the UK we never did this
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Will definitely be dling this next time.
@bryanhutchison9982
@bryanhutchison9982 Ай бұрын
You’re earning your wage there mate. Plus a nice little weigh in from the off cuts 👌🏼👍🏼
@jointechcabling9103
@jointechcabling9103 Ай бұрын
The money was brilliant but the client takes the cut offs. Its not worth my job to take them without permission.
@bryanhutchison9982
@bryanhutchison9982 Ай бұрын
@@jointechcabling9103 100% mate.
@johnwaby4321
@johnwaby4321 Ай бұрын
Blimey Tony they do want you to struggle to make your money. Not a lot you can do with those 630 mm cables . Looking good so far 👍👍👍👍
@jointechcabling9103
@jointechcabling9103 Ай бұрын
They're all done now. It was a task but i wouldnt let them beat me.
@johnwaby4321
@johnwaby4321 Ай бұрын
@jointechcabling9103 nice one Tony 👍 👌
@m101ist
@m101ist Ай бұрын
You should purchase some comfy steel toe cap Wellingtons, look after your feet when working in wet condition.
@jointechcabling9103
@jointechcabling9103 Ай бұрын
I have done just that. They are really comfy and warm. Im now prepared for the winter weather.
@impactvision
@impactvision Ай бұрын
what a gash design! always site lads overcoming an engineers oversight.
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Been saying this for years now. Clueless the lot of them, well, 90% of them
@kirkhamandy
@kirkhamandy Ай бұрын
8:45 A bit more Scottish food and those trousers are splitting 😂
@jointechcabling9103
@jointechcabling9103 Ай бұрын
The wife said they were a bit snug. Theyre all elasticated. The material stretches. Theyre not like normal work trousers that im used to.
@Mike_5
@Mike_5 Ай бұрын
Beautiful Job Tony sorting out that mess but you just know that JCB is going to poke through at least one of your cables in the near future i believe the phrase is 'Get Tae Fook' or such like
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Thanks very much. It would be a right bastard to put right as well, particularly if it was one of the back ones!!!
@JL-rx6hl
@JL-rx6hl Ай бұрын
At least it wasnt raining
@jointechcabling9103
@jointechcabling9103 Ай бұрын
That is true. It never even tried
@glennbarker222
@glennbarker222 Ай бұрын
Turning out to be a neat cableway. What is it? Mains, generator? Always nice to know.
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Generator supply. Itll hardly be used and cost a bloody fortune to install. God knows how much the Generator itself cost.
@___AD
@___AD Ай бұрын
Question - For a job like this, do you charge Price or Day Rate? Love the videos and love how easy you make it all look haha
@jointechcabling9103
@jointechcabling9103 Ай бұрын
I always charge a price per end. If i charged a day rate i wouldnt want to work past that amount. I try to avoid it coz its slows the job down.
@liveoak227
@liveoak227 Ай бұрын
Im curious, do electrical contractors in the UK ever have their own in house cable jointers, or do they tend to sub that out? I do large commercial and industrial electrical work in the US. Here electricians pull the cable and terminate switchgear, transformers, distribution panels etc. Ie, there isnt really a distinction between cable joining and other electrical work. I do have to admit it makes sense that what Tony does would require separate licensing and certification. Ive met many electricians who rarely put their hands on anything bigger than installing lights, switches and receptacles.
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Some companies do have jointers that work direct for them but most subcontract it out to people like me. I think it makes sense because you become specialised in your particular field and make a better job of it. Plus the tools are incredibly expensive.
@obd6HsN
@obd6HsN Ай бұрын
Hello, have you ever talked specifically about Al? Most electricians will only see Cu core, Steel Wire Armour but I know a lot of the bigger cable is Al cores and / or Al armour. How do you go about jointing that stuff?
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Ive only ever done 5-6 aluminium core cables. Its pretty much the same proceedure as copper as i remember. The higher voltage stuff tends to be aluminium but im not qualified to deal with those voltages yet.
@TronicUK
@TronicUK Ай бұрын
The single core cables have aluminium armour to prevent currents circulating through the armouring if steel . The gland plate will also be aluminium.
@babooXX
@babooXX Ай бұрын
What the actual effing eff are they doing with that much power? 🤯 Jumpstart the Sun?
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Everyone has said this. Its a 1600a breaker. Im not sure what the capacity of the gennie is.
@yosserg9389
@yosserg9389 Ай бұрын
Do you never have a labourer/mate?
@ShalomBrother
@ShalomBrother Ай бұрын
Madness isn’t it, I take my hat off to him. Hard enough with a mate with you, I wouldn’t even attempt it on my own.
@yosserg9389
@yosserg9389 Ай бұрын
I’ve never done anything that big but I do like doing larger cables but it is serious graft! Fair play to the man.
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Nah. Ive gotten to a stage where i can use mechanical means to get me through the day. Ratchet straps dont need paying or want any time off🤣🤣🤣 the company might be nice from time to time though.
@Savagetechie
@Savagetechie Ай бұрын
​@@jointechcabling9103if you're working in Edinburgh give me a shout, I normally do temporary power with nothing bigger than 240mm but would happily give you a hand for a day.
@richardlumley2581
@richardlumley2581 Ай бұрын
Hard to get a scale, whats the diameter of each of those singles? Looks about 60mm? Is that aluminum armored insted of steel?
@jointechcabling9103
@jointechcabling9103 Ай бұрын
About 50mm. Its an aluminium armour instead of steel. They are about the size of a 4cx95 or a 4cx120 depending on manufacture. Also they dont like to be bent🤣🤣
@richardlumley2581
@richardlumley2581 Ай бұрын
@jointechcabling9103 thanks, 50mm around is a big old cable! I'm not a spark so don't get the scale from the other sizes! Looks like mega hard graft though, top work!
@TronicUK
@TronicUK Ай бұрын
@@richardlumley2581 the armouring has to be aluminium in a single core cable . Current would be induced into the armouring if it were steel and cause excess heat and losses into the earthing system . This is not a problem on multi core cables as the opposing magnet fields cancel . The gland plate is also aluminium.
@richardlumley2581
@richardlumley2581 Ай бұрын
@@TronicUK that makes a huge amount of sense, thanks for adding that.
@31590naujokas
@31590naujokas Ай бұрын
👍👍👍👍👍👍👍👍
@jointechcabling9103
@jointechcabling9103 Ай бұрын
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@eddiereed5025
@eddiereed5025 Ай бұрын
who designed that joint cabinet hope no one ever needs to get to the cables again
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Crazy isnt it. Theyll probably never get used anyway.
@ELECTRICLIFE4U
@ELECTRICLIFE4U Ай бұрын
👍👍👍👍👍👍❤
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Cheers mate 👍🏻👍🏻
@ELECTRICLIFE4U
@ELECTRICLIFE4U Ай бұрын
@@jointechcabling9103 🔝👍👍👏👏
@stevehenke678
@stevehenke678 Ай бұрын
You know when you watch stuff like car sos and they manufacture some bullshit situation just to add a bit of drama? This is the opposite of that. This is actual problems that need solving. 😂
@jointechcabling9103
@jointechcabling9103 Ай бұрын
They invent them for real due to the lack of experience of the design team🤣🤣. They think its a great idea until someone with a brain points out that they are thicker than shite.
@TheYohtube
@TheYohtube Ай бұрын
It's bit shit if you are only paid per termination!? It's a days work before the knife comes out! Nice bit of scrap though...
@jointechcabling9103
@jointechcabling9103 Ай бұрын
It worked out ok at the end of the week though😬😬😬
@SirHackaL0t.
@SirHackaL0t. Ай бұрын
How many EV chargers is this for???
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Hahahaha. It was a generator supply😲😲😲 probably never get used
@walseee
@walseee Ай бұрын
BOSH
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Mostly makita🤣🤣🤣 cheers mate👍🏻
@user-ox4eu3xi3s
@user-ox4eu3xi3s Ай бұрын
cant stop thinknig of your monthly scrap weigh in , its likely more than most peoples wages in a min paid job
@jointechcabling9103
@jointechcabling9103 Ай бұрын
When you get given a bit from the engineers its lovely.
@Jackb89
@Jackb89 Ай бұрын
Amazing as ever mate do you need a spare pair of hands 😂
@jointechcabling9103
@jointechcabling9103 Ай бұрын
Thanks very much. Im fine for now. Maybe when i get a bit older and weaker.
I dont usually point out other tradesmens' bad work, but...
22:57
Jointech Cabling
Рет қаралды 9 М.
THIS is Why Your Heat Bill is So High
18:21
Home RenoVision DIY
Рет қаралды 2 МЛН
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
Part 1 of my working week. Some substandard work to put right
44:55
Jointech Cabling
Рет қаралды 7 М.
Real Time video to show the process of G&T of a 1cx630awa
27:12
Jointech Cabling
Рет қаралды 3,5 М.
Man Turns Ruined Garage into Amazing Workshop | Start to Finish by @tyap-lyap
30:12
One of the most challenging jobs I've ever tried to complete!!
30:32
Jointech Cabling
Рет қаралды 10 М.
The High Voltage Grind: How I Tackle 500mm² Cables
42:48
HV Sparky
Рет қаралды 7 М.
New Career? Got some big cables done this week. How big?
42:22
Jointech Cabling
Рет қаралды 14 М.
Can you move a whole switchboard on your own? Can I?
37:33
Jointech Cabling
Рет қаралды 9 М.
How much for one cable? 5cx10mm takes me ??mins to complete
19:44
Jointech Cabling
Рет қаралды 10 М.
Glanding 4 core 185mm² SWA cables | REC10
23:31
Residual Electrical
Рет қаралды 28 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.