That's an interesting way to do that. Mine was set up with two switches and one was electric to a valve that locked out the leveling valve and the other one was a air switch for air windows and that gave the adjustment of how high you want it. That setup you have definitely works but I'd probably flip the air cylinder 180° so dirt and water doesn't lay on the seal of the piston. Good stuff.
@TheTourettesTrucker20 күн бұрын
Sure appreciate the video. It helped me make and install one on my coronado for tanking. I needed to get the drives up for more fall on the rear of the trailer.
@robertomorelli472510 ай бұрын
Could you please be kind enough to share where you got that air cylinder so I could do the same, many thanks !!
@saulsalas89732 жыл бұрын
Great job Kam.that’s going to help out alot !👍🍺
@lukegreco8812 жыл бұрын
damn, you don't realize how low your truck is until you brought it to max height, love watching your videos brotha; also needs some hidden hood latches
@Carhaulercharlie2 жыл бұрын
Yea my car hauler has that same switch and same function too. It raises my about 4-5 inches in the rear and raises my trailer 4-5 inches too. But that will definitely save your tanks for sure. And with some of the dealerships I go into my fifth wheel stinger stills bottom out……. Lol
@squirrelmaster12252 жыл бұрын
when i saw your video down on Rainier ave, and how close your belly was to that driveway, i was going to ask you if you had it, Ive done that to most of my trucks, can be a game changer : ) I do mine with a pressure regulator inline and bypass the ride control valve all together, ive never seen it done with the air cylinder, nice work.
@adrianchetraru97262 жыл бұрын
Nice job! Where can I buy those rods?
@remembergodisalwayswithyou68622 жыл бұрын
Nice truck bro 🙌 love from Morocco ❤ God bless you * God bless America ^-^
@eddieb99752 жыл бұрын
Nice! Just make sure don’t drive like that because it’s bad for the u joints,my Peterbilt came high from the factory and it kinda nod like a grinding sound and it ruined the rear end and we found out it had to be lowered
@kylewest74492 жыл бұрын
Mess up the transmission too
@michaeljestice42342 жыл бұрын
I thought you were going to link the place where I could purchase the part
@Revan_the3rd2 жыл бұрын
Somebody knew exactly what they were doing when they ordered their truck
@scottycollins35712 жыл бұрын
Kam dnt 4gett to put wireloom around blue airline so it doesn't rub an hole in it, 😎💯
@brentunruh55112 жыл бұрын
Have a part number or link to we’re you got air cylinder?
@polito99245 ай бұрын
Where can I order one of these? Been struggling with my fuel tanks always so close to the ground on certain situations
@tinomatos89862 жыл бұрын
Is that air rim spring-loaded to return back and where did you get it
@rudyjon382 ай бұрын
Do you have a part# or link for that cylinder?
@paulsantoro12352 жыл бұрын
It looks like a stock pickup truck that needs a leveling kit 👍
@tylerkeleman8933 Жыл бұрын
I need this on mine. Does it really make a big difference? Like 4 inches doesn’t seem much
@wrightb3125 Жыл бұрын
Where did you get the air shock?
@joseandrade543 Жыл бұрын
whats the name of the color or paint code?
@hobierice983 Жыл бұрын
Where can I get that actuator if u don’t mind
@zachschmidt55592 жыл бұрын
Needs individual fenders in the back
@leelahd44282 жыл бұрын
If your bags are maxed out, will going over a hump or rough ground possibly pop one?
@Rockwell1082 жыл бұрын
Yes, but you only use over inflate to push a trailer up when the landing gear gets stuck. It should only be used for slow slow movements.
@philherbox40522 жыл бұрын
@@Rockwell108 On trucks like that one it's mainly used to keep the fuel tanks from hitting the ground when the truck gets on uneven ground. It has very little to do with the landing gear on the trailer.
@OmarGonzalez-km7tx2 жыл бұрын
Is your brother gonna drive with you
@osamanbush65752 жыл бұрын
more load drop vids!
@ЕрикАппасов2 жыл бұрын
базар жоок DmX играет!!!
@wesadams75607 ай бұрын
What stroke is that cylinder?
@trucking4racecars7 ай бұрын
It’s adjustable
@wesadams75607 ай бұрын
@@trucking4racecars thank ya sir much appreciated. Wouldn't care to share the brand of it would ya. I've looked on Amazon found a bunch of different kinds. But knowing the stroke is adjustable helps me a ton. One more question would feel confident enough in installing that in the steer axles also? I'm wanting to do my rear and steer axles. I just don't know if I want to take a chance on the steer axle with that or if I should just buy the over inflate valve setup.