Expensive stuff is only worthwhile if it's good, when it's not it's little more than dick swinging.
Пікірлер: 115
@Dacialastun2 жыл бұрын
I am a bedroom tech and I wouldn't fracking do those atrocities ever. I take pride in my work. I guess that's why I like and watch this bloke :)
@whatdidyousay89786 ай бұрын
same here ive been starting to so a few builds for my friends and i was actually happy abt my work
@WailfulAMVCarp2 жыл бұрын
My friend also got the cqbr dsg "drop in gearbox " and the airnozzle was not connected with the tappet plate... Great paintjob and once again somepeople got robbed
@professor101932 жыл бұрын
Love the backwards red dot perfect rage bait lols.
@allancastaneda58422 жыл бұрын
I can smell the hate against Umbrella armory 😂
@turbo_doge74292 жыл бұрын
7:49 God Damn it, i literally spit my drink out when i heard that.
@fusi0nn2 жыл бұрын
I love the paintjob on the .308 G&G!!! Thanks for another awesome video. You definitely are a positive influence on our community and we need more people like you that tells it like it is.
@WMPT822 жыл бұрын
That 1000€ for a full krytac always made my brain hurt, not that I do not think they do a great job, have no reference to that, but because there is so much an airsoft rifle can do with the power limits we have, and I can reach that limit with a trick out cyma ak with a fraction of the cost.
@WMPT822 жыл бұрын
Ps: that red dot in the end was your "fuck you wankers" bit
@LamborghiniDiabloSVPursuit2 жыл бұрын
I will forever shake my head at anyone willing to pay quadruple digits for something as basic as an AR15 platform, and to a similar extent, a Hi-Capa. I like Krytac LVOAs myself and I like AR15s in general, but I am not paying that much for one of the most pedestrian guns in the airsoft circuit. Its like trying to impress people in an exotic car club with a souped-up Honda Civic.
@DannyGruesome11 ай бұрын
I have a 279 dollar cyma RPK and its bone stock and i have a 50ft ED. If it shot any harder id need a scope and have to snipe
@alistairevans14282 жыл бұрын
I wonder how many will be triggered by the backwards red dot 😂
@lordtachanka8517 Жыл бұрын
I was looking for someone to mention it😂
@Mechwolf2 жыл бұрын
I'Ve gOt A 3d PrInTeR, i"M a GuN eNgIneEr-SmItH!! Fuck, I felt that
@NegativeAirsoftTech2 жыл бұрын
Good.... Good.
@Vortex-jk3me Жыл бұрын
Like the Gordon Ramsey of airsoft I love it
@arthurchan92642 жыл бұрын
My inner voice sounds exactly like you
@hayman12222 жыл бұрын
The airsoft Gordon Ramsey. I love your videos.
@lordadmiralravenclaw17662 жыл бұрын
thankyou for making this video, after seeing the shit my mate had to put up with to even get his gun sorted is appalling, from such a "high-end" company youd expect abit more care, safe to say he's well happy now 🙌
@Mrmhibbert2 жыл бұрын
Gotta love Luke's no bullshit approach to his tech work. Would be up there for my first choice of techs but always crazy busy. I want to turn my Ssg1 into a single sector gear 556 hybrid
@petownr2 жыл бұрын
bros an airsoft gordan ramsey
@cmarriott38352 жыл бұрын
Bum Sausage
@MrGashforCash2 жыл бұрын
Bum Sausage Legend!
@drewbacca_ttv251210 ай бұрын
Bro 7:50 had me in stitches man😂such an on point impression😂😂
@johnwick60882 жыл бұрын
Never liked the look of these g&g dmr’s. Just looks like a combat machine masked into a sr25.
@untrust20332 жыл бұрын
Damn, that's a pretty good way of putting it
@fjjwfp78192 жыл бұрын
The actual KAC SR25 Mlok (semi only from factory and G2 gearbox (standard V2 nozzle) is much better imo
@netaslive2 жыл бұрын
@@fjjwfp7819 woooooa where can this be found cause g and g is great but fuck me that sr25 is atrociously dumb
@CMTechnica2 жыл бұрын
@@fjjwfp7819 pretty much anything with the proper KAC license is better, barring the SR16 from a few years ago
@darylobey8867 Жыл бұрын
The newer kac g2's are pretty good and on semi with a 7.4 there fuckin silky smooth on the trigger pulls
@DanPyjamas2 жыл бұрын
Ooooh, I really liked that paint job on the first one.
@danmclean73752 жыл бұрын
7:46 🖐🤣 that screech.. perfect impression..
@colinwhitehead22442 жыл бұрын
Them 2 camouflages look really amazing
@tmellor7797 Жыл бұрын
I just came back this video and had a thought. It’s very possible all that black plastic is from the original piston head. The G&G ones are pretty popular for blowing up in high stress builds in my experience
@opairsoft81002 жыл бұрын
Not going to lie, Krytac should reach out too your about that paint job on the LVOA, I would buy one in a heartbeat.
@viperscot12 жыл бұрын
love the painting job artist you are Luke in teaching too keep up with the excellent content bestest from Scotland
@dreadgarr2 жыл бұрын
I find your vids great mate, truly good for a laugh.. when you address the "absolute fuckery".. D.
@blkairsoft552 жыл бұрын
I agree 😂 I e achieved same if better results with an ssg build with less the headaches of this gearbox. I thought it was a waste imo to buy them especially for the price. Great video btw 🔥
@BuryZeDead8 ай бұрын
Very nice atmospheric music 😊😊
@bugsstomper7984 Жыл бұрын
At the minute 21 mark... why is that red dot backwards? :D
@98DemonZ287 ай бұрын
Im just going to stick with the cyma platinum gear boxes untouched. It's cheap enough to just slap a new gear box in if it takes a shiet
@qumquats252 жыл бұрын
At a field owner gave me that gun stock after ordering 2 time and all of them have separate issues. Well by the time I got it the barrel was fucked to shit mosfet dead. And load gears. Replace the gg trigger board perun ettu and cnc. And it's butter thank you sensei.
@Nater20047 ай бұрын
One of many reasons why I prefer to pay others to the work for me because i know that they won't fuck it up.
@MrGoogle87 Жыл бұрын
Black plastic could be from (broken) spring guide or bearing, but not shown on camera
@SussexMatt2 жыл бұрын
Really interested in understanding how you finish the paint, most airbrushing I do hasn't been for hard wearing applications like airsoft but I've been asked to paint a couple of guns. I'm guessing you finish with something like a Halfords car lacquer and then matted down to avoid damage to the paint job?
@zergiomoreno Жыл бұрын
Love your paintig of the guns..
@jeroenlochs35842 жыл бұрын
love the paintjob!
@ewanjones55912 жыл бұрын
they even managed to incorporate krycrack into the Vector. I can't say im suprised the krytac had hipster hop
@niko.maschine Жыл бұрын
7:49 average AEG sound 🐕🦺🐕🦺🐕🦺
@WayneD19712 жыл бұрын
Drop in gear box bit like Krytac advertising that the spring is quick change yeah after youve taken the gear box out. Oh and the screws that are soft as shit. But still love my LVOA 🤣🤣
@ohforfxcksake2 жыл бұрын
Great video as usual. I'm just getting back into airsoft after about 15years . I've dug out my tm colt m4a1 which is ok but my tm mp5j will only shoot bbs when it feels like it. They seem to snag in the feeder tube to the hop. If I take the mag out and hold the 4or so bbs in the tube they won't fire through if I turn the gun upside down with the mag off the bbs in the tube will fire through lovely, the hop rubber is like new with no niks or tears. Both guns are hardly used and were stored in their original boxes 😁 hope you or someone can point me in the right direction 👍
@ohforfxcksake2 жыл бұрын
Don't worry, chopped em in for bolt b4a1 elite's 😁
@nikelski95902 жыл бұрын
Not sure if anyone already told you this, but for me, you sound like Gordon Ramsay of airsoft world. Love the content
@Matt-md5yt2 жыл бұрын
this is going to be a good video
@seanhochrine18382 жыл бұрын
Is that an umbrella gearbox?
@jankodras16762 жыл бұрын
Pretty sure it is😂
@NegativeAirsoftTech2 жыл бұрын
Bingo - both
@netaslive2 жыл бұрын
Hey man the hk416 umbrella armory is perfect…… 2000 usd sounds like a GoOd PrICe To mE
@VranabgАй бұрын
considering the red dot is backwards its uh not suprising
@CommanderShadowLord2 жыл бұрын
17:47 who the hell thought that would give you a good accurate hop on your bbs
@lunazwerenz58272 жыл бұрын
Second one isn’t bad sounding but yeah agree with you on it
@michaelmccr32942 жыл бұрын
Why in earth do people file down the circle part?? See first if the circle part fits the dimensions and if so but the 2 legs don't just file one side of the leg not too much. I've done that with a king arms and it fits in the double eagle version 2 perfectly and the noise from the original one is gone. Never file the circle but file little bit of the legs to fit in and stay in place perfectly.
@Taseden2 жыл бұрын
Really surprised on that spring guide. The Krytac already comes with a bearing spring guide. It looks like they shaved down a Lonex V3 bearing spring guide to fit.
@anonymousperson78612 жыл бұрын
It’s a nuprol non QC spring guide for a V2 gearbox. That’s just how they come
@marianocappetta919411 ай бұрын
Little dog bark 7:49
@latch97812 жыл бұрын
This is why I do not touch teching, I know my incompetence too well
@Jurnskii9 ай бұрын
having a "stabilizer" in a free float rail defeats the purpose of the rail. thats dumb af
@wisewhiterabbit2 жыл бұрын
so im looking for a recommendation. im looking for a snappy v2, about 350fps with .25 out of a roughly 10inch m4. mainly looking at a reco for a gear set motor and battery? im looking at rifles with a quick change spring system. so i can dial in the 350/ish once i get close enough. unfortunately all the techs around me are......parts slappers at best.
@danielferraro595 ай бұрын
OMG i fucking love u mate you’re the absolute bollox!!!! 😂💪🏻💪🏻👌🏼👌🏼
@NegativeAirsoftTech5 ай бұрын
I know
@danielferraro595 ай бұрын
exactly !!!!! 😂😂😂😂💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻😂😂😂🤣🤣
@MagnustheJust2 жыл бұрын
I know l speak for the lot of us, when l say you under estimate our perverted viewing desires... GIVE US THE CRYING WANKING FEED!!
@iReinTV Жыл бұрын
me just buying the g&g sr25 e2, then this vid gets recommended...lol
@Ultra-Collector2 жыл бұрын
Honestly! Do you want to do voice overs for Crank Yankers? I could seriously grt u a job!
@ponchopower2 жыл бұрын
I own 2 g&g guns and they both have the same issues screws unwinding themselves, mags shaking like crazy and falling out parts litteraly falling off and so on they look amazing tho just not very usefull on the field
@darylobey8867 Жыл бұрын
Am still useing a g&g toptech 416 with g& g 25k motor e&c cylender set stock gears and a perfun v2 hybrid and the screws fuckin hold in mine :D and ran it stok for like 5 orn6 years then i found this channel and learned to tech it but she shoots more smooth and accurate and in use titan 7.4s or 11.1 li ion batterys now :)
@setsuna2002 жыл бұрын
I don't get the dsg thing. I can do the same thing on a short stroke gears. I really don't get it?
@alistairevans14282 жыл бұрын
Did I spy a prowin in one of those Krytacs? 🤔
@ALEX-xd7ko2 жыл бұрын
Luke. Please please help me out with a link for your bearing gears . You call them zip c.i . Im not sure what that is and cant find zip ci lol. It might be your accent but i can not find them gears anymore anywhere. I use to run the shooter bearing gears then the big dragon gears . Please help me out man .
@A1Retro422 жыл бұрын
He says “zed” ci which is how non Americans pronounce “z” the gears are Zci gears
@sterkriger25722 жыл бұрын
ZCI gears
@ALEX-xd7ko2 жыл бұрын
Ive looked all over for the zci bearing gears and cant find them . Brill , nor shit cant remeber the name but they sell the hunter seeker barrels and alot of zci parts say they can get them anymore .
@NegativeAirsoftTech2 жыл бұрын
@@A1Retro42 *correct pronounciation
@Taseden2 жыл бұрын
@@ALEX-xd7ko My reply seems to have been blocked, probably because of the direct link. But check out Airsoft Extreme. They have ZCI bearing gears in stock (I have bought a couple 13:1 sets).
@stealthtecify2 жыл бұрын
What paints do you use buddy?
@-zerocool-2 жыл бұрын
Do like a Krytac
@LarryCuckman2 жыл бұрын
What’s your thoughts on evikes open box mystery?
@NegativeAirsoftTech2 жыл бұрын
The what?
@the-sarge842 жыл бұрын
Top Vid
@Drewakm47 Жыл бұрын
I think it would be awesome to see a clear ghost gun maybe even something out of boneyard possibly even broken and make it bad ass and get responses after they've been shot over and over 🔫😎
@danielk99062 жыл бұрын
This is why i buy stuff factory standard Also yeah weve got buyers protection, but no sellers protection for people like you... Also those red triggers remind me of my land mower, that has a red button to start it, so you know its dangerous
@beavis-o_o19582 жыл бұрын
ah umbrella rant
@MercutioUK20062 жыл бұрын
I wondered who it was! That's bloody terrible QC.....
@00kingi2 жыл бұрын
Can’t be umbrella… surely not
@MercutioUK20062 жыл бұрын
@@00kingi I honestly don't know, I tend not to follow a lot of the custom/bespoke companies or their reputations so I don't have a "horse in the race" so I was just wondering if they are "that" bad :)
@NegativeAirsoftTech2 жыл бұрын
@@MercutioUK2006 I do get given quite a lot...
@MercutioUK20062 жыл бұрын
@@NegativeAirsoftTech that says it all 🤣
@pjmq2 жыл бұрын
Could you do a video on your absolute best setup you could do money not option. i.e all the parts, the right gearbox, motor, battery, mosfet etc. Just something common like an m4 as the patient. Watching your stuff, as informative as it is, sort of bums me out as you'd swear almost everything on the market is either utter utter shit, or has a better alternative.
@NegativeAirsoftTech2 жыл бұрын
Nope, every gun is different,impossible
@pjmq2 жыл бұрын
@@NegativeAirsoftTech fair enough
@MercutioUK20062 жыл бұрын
I have this T.N.T barrel (The APS-X) and I , yes, was stupid enough to pay full price for it....so of course, I would like to use it as I have it sat here looking forlornly at me with it's one eye. These barrels have a very wide window in addition to the dual bore effect so I was wondering.....do I try to make it work by getting myself a recommended nub and bucking (Stalker and Truhop) and settling for the 30fps drop that these barrels seem to cause OR do I chop off the twisty bit and simply slap a Maple leaf MR bucking + Omega nub? Yes, I do intend on crowning the barrel afterwards........yes....I have done barrel chops before (pipe cutter and on another occassion, a dremel).... BUT I've never used the damn thing in a build beyond testing it and in either case the whole thing is going to be sent to a reputable tech *cough*Luke*cough* so my main point of ponderment is if the damn thing was worth the money in the first place. Over to you, interwebs.
@Alecbassindale20242 жыл бұрын
IvE gOt a 3D pRinTeR 😂😂😂😂😂😂
@whale2592 жыл бұрын
When will people learn to send their stuff to people who actually care and take pride…. Oh well, more of a challenge to fix pre upgraded shit than stock stuff soooo bring it
@andrewwood8706 Жыл бұрын
im a big believer in if you can do it yourself do it,but dont fuck up something cos you think you can do it
@cankurt66342 жыл бұрын
one day people will understand us what the fuck bullshit drop in gbx is…we are shimmin polising every single part even bearning but hold on They the best…
@antoinehubert87492 жыл бұрын
Only naive people are still buying G&G....
@darylobey8867 Жыл бұрын
Thats all i use ;)
@antoinehubert8749 Жыл бұрын
@@darylobey8867 Good luck...
@planetcaravan29252 жыл бұрын
Bum sausage
@melon96802 жыл бұрын
Fads, i dont get why anyone would think it logical to do something because a large group of people claims its good, rather consulting the 1 guy who is qualified to do a specific thing the right way. Dumbshits, Dumbshits everywhere. Partly why i hardly play the game anymore.
@patrikpape57682 жыл бұрын
as a speedyboy(playstyle, not rate of fire in full auto ;) ), that does all his shit himself i can say: fok the gucci. i paid 0€ for a 2mm travelway of the trigger using a cut out piece of plastic glued to the right spot. works like a charm for ~10k rounds now. and around 15€(trial and error included) for a diy tracer hopup unit (wouldn´t recommend, get a tracer unit, not worth the grind imo. TU´s are still a fokin rippoff when you realize, how cheap it is to produce). using a 2. hand stock G&G CM16 E.T.U Keymod Softair SRS i bought in prestine condition for 120€ (Semi-Only, laws in germany dont allow FA over 0,5j. and more fun for me.1,19j. cause 1,2j is max on the field i play). shit owns 99% of ppl using all the crazy, overprized shit. i look like a gipsy on the field and ppl give me funny, sometimes arrogant looks. until i got behind them the 3. time because your gun cant balanced out lack of skill. not even a roided up firehawk with a drummag. i fokin love it