Over Unity Magnet Motor Explained

This free energy motor is 18" wide and 10" high. This over unity motor weighs almost 100 pounds, it has approximately 20 pounds of copper winding. This magnet motor has an uneven number of permanent magnets and electromagnets. This free energy motor has 11 massive coils on the stator and 12 strong neodymium magnets on the rotor that allows the motor to run very smoothly and puts less demand for power on the battery. The battery does not need to energize all of the coils at the same time but energizes only 1 coil at any given time and when the power to that coil is turned off, then it proceeds to the next coil. The timing is a little complicated, in a single rotation, the combined pulses of all the electromagnets is 132. At a speed of 3,600 RPM, the pulses are at 475,200 per minute and 7,920 per second. The motor radiates a tremendous amount of radiant energy such as collapsing field energy and inductive energy. The collapsing field energy can be captured and used to power 11 different loads or can be used to recharge it own battery or it can be used to be dumped back into the motor on the next coil ahead to be turned on so that the energy to the electromagnets will be partially from the battery and partially from the collapsing field energy. This way the energy can be recaptured, recycled, and reused over and over again.
Website: mindoftesla.com/

[@overunityinventor]

Thanks for your effort and patience in making almost half an hour video, just to explain the working principle to spread the knowledge! World needs more people like this kid and his father (assumed)! or guardian.

[@DanielsInventions]

Thanks for the positive response.

[@eemc2cu745]

@@DanielsInventions Fantastic channel, my hat off to you Sir! They Over Unity Magnetic motor, will you be selling plans to this. Thank you.

[@ralfbauerfeind8236]

@@DanielsInventions May I ask what the torque is that this motor can produce at which rpm, and what the average wattage of the input is at those measure points? Or - as you claim this motor being overunity - after which time the battery with about 70% charge is back to 100% charge again? I am sure you already made such measurements, right?

[@bablutu]

The speed of this motor without moving on the table is incredible, and the replication of this invention is not a walk in a park either, im glad that there are light minded people out there willing to share

[@thenarrowgate3063]

I swear I felt my tablet shake when that motor was full tilt! Nice work!

[@overunityresearchchannel9386]

Excellent work Danielle you are a brilliant young man I have alot of respect for you and your family dont Ever listen to anyone who tells you something is impossible especially even if they are telling you and they have never tried it themselves your a good kid man I am glad we have a bright young mind working in the alternative energy field one day your going to make a Big Difference in this world Daniel thank you for all your hard work time and dedication 😀💯👍

[@oudotcom]

Well done, but be more carefull, if one of the magnet gets loose or disintegrates at these high RPM speeds, it will fly like shrapnell into each directions... Be very carefull with this ! ANyway, many thanks for the videos. Regards, Stefan.

[@pcdoc1097]

This looks like a variant of the Howard Johnson motor (may be wrong though ) . As for safety I agree with you - the kid should at least be wearing safety goggles ...

[@janetc2241]

GREAT WORK DANIELLE, YOU HAVE MOST OF THE MAKINGS OF A FLYING SAUCER. NO KIDDING !

[@ChuckYoung75]

Very nice videos. Looks like you guys are developing a great working knowledge of the concepts that were used in the Muller dynamo, work of John Bedini, and many others who have of course all been trying to pick apart the great mind of Nikola Tesla!!! Great work! I've done quite a few experimental builds with different variations of many of the same concepts. Many do not realize the detail and the work that goes into each of these devices to learn and understand every concept as you slowly make it better and better along the way! Your workmanship is awesome. Keep up the great work!

[@artrock8175]

This channel is pretty interesting. I would like to see some behind-the-scenes stuff regarding the tools or machines you use to actually make the parts. I imagine you have access to both subtractive and additive manufacturing equipment.

[@tlatoanimachi]

Me as well because it doesn't make sense how all this is being done and then presented by a kid. There is no way.

[@rblibit]

Excellent work building that thing! I'll bet you can pull a 750 or maybe even a thousand or more watts out of that unit. I see a time coming to our world where we will need sources of power for all kinds of things only our regular power sources will not be available. We will need pewer for medical devices, water purificaiton systems and pumps and whole host of similar things. Good sized batter chargers will be most needed for banks of batteries that run A/C inverters. The technologies you are experimenting and working with are right up that alley! Keep going! You are teaching people things they will need to know. I am working Magnetic Motor Generator sets for that purpose. I am a retired military officer whose specially was electronics and computer science, and you have already given me a few good ideas from one of your other videos! Thanks for this video, too - it was excellent!

[@kennyclement2823]

Is there some way to utilize the gyro dynamic energy created by this high-speed spin, as a by-product??

[@stravs8097]

Very impressive! One thing I thought was missing from your explanation that the average viewer might be wondering about was the watt rating of the bulbs used, and the total watts used when they are added up. This compared to the roughly 140W used by the two batteries to power the unit. This would show the over-unity in terms of numbers. It might also be worth using a tachometer to show the claim of 4X the rotation speed for 2X the input power.

[@quantumenergysolutions9128]

Amazing stuff!

[@gerarddugas6224]

Safety glasses would be a nice addition.....plastic fast motor....batteries....a lot of dangerous mechanical energy. I LOVE THIS VIDEO . MOTOR IS a wonderous Bedini design I am guessing.

[@major-singh]

Welldone bro you are great working god bless you

[@GlueChube]

Good work Daniel, you have a great channel. I would urge you to have a healthy respect for rotating machines, if the rotor had failed it would have been very dangerous. Home builders of rotating machines, propellers frequently underestimate the stresses caused by centrifugal force. The added problem is that such failures are a chain reaction as the fragments (with the energy of bullets) causes the failure to escalate making it catastrophic explosion.

[@mrwhiskers8951]

That is so awesome! Any chance you could walk me through its design and math? I always wanted to make something like this but I don't have any grounding to start.

[@NoGoodNoob]

I imagine turning that into a cieling fan and powering the lights in my living room wirelessly. This is really cool. Haha

[@tomiharyono3523]

nice motor

[@lms9020]

VERY GOOD..

[@DavidD6969]

Nice 👍

[@tahanlaoboy]

Nice and keep going

[@davidepps2354]

Are you using ignition coils? Or ignition coil switches like a high speed relay?

[@verygoodvibes]

great presentation !

[@henridecorbiac2239]

Hello, thanks for your research !! Your website is not accessible due to security issues, is it censored ?

[@mrstanlez]

One question: Do I need this motor-generator if I use battery and LEDs ?

[@michelmorel9208]

Daniel & Dad, could you share a rough diagram or a circuit schematic please?

[@make425]

Anyone notice the rpm change the frequency at 16:15 16:18? Nice build 👍👍

[@gregstafford2155]

What was the reason for not using iron core in the drive coils. Air coils have hysteresis losses

[@raloed.363]

The title said overunity but you didnt show any overunity. Is the motor itself overunity as its torque and speed output is higher than the electrical input power? You said the couls have a secondary coil. Is this secondary coil an output generator coil? And if so can you show it under load please?

[@pritampaul6552]

What about electromagnets in inner circle with needle bearing with whole for wires through universal joint, and permanant magnets in outer circle without needing electrical connection to inner circle, for both with vertical coils circulating in opposite direction on the same tube shaft ???

[@mohammadadam9084]

Can you do some stuff with Rodin coils. There’s no info whatsoever on how to get started with them and what they’re capable of.

[@clintrichardsonclintfromny203]

Does it require external power to get it running?

[@you5711]

Hi, Daniel. Could you give us the part numbers for the switches from 6:14 to 8:32. Thanks.

[@ztukariansevuri]

How is this over unity? Correct me if I am wrong (know nothing of this science) but wouldnt the draw on the battery along with the drop in current be because in order to reach maximum rpm per the power source that it would draw more power in order to spin it?

[@savetheplanet8450]

try to use in the same plane to wide mugnets(really whide like ruler ) with pols upwards. And short-whide coil between them as a motor. Idea is - less difference dB , less dB/dt ,less opposite Voltage. But we dont using pole of magnet, we use side of magnet(in current plain if it would be plain coil, and opposite side of it wery far of us)

[@gregstafford2155]

Great design of the drive coils. Are you putting the back emf into the secondary winding? That would make a double pulse every magnet pass👍

[@DanielsInventions]

We were thinking about it but the timing has to be right. The speed of the motor, the width of the pulse, the resistance of the wire, and so on has to be determined how long does the coil stay turned on and how long does it take for the collapsing field energy to change direction and collapse, it also has to be determined which of the coils will be turned on next and then the energy can be dumped into it so that it can use partially the power from the battery and partially the collapsing field energy. We just haven't had time to get back to it.

[@gregstafford2155]

@@DanielsInventions thank you for reply. I think you have a special motor here but I think it still uses too much power. Modified Bedini circuit with bemf going into other drive coils for adjustable timing is key

[@JF32304]

@@gregstafford2155 unfortunately it's the design. Nothing you can do with this design will increase efficiency. Hate to say it.

[@lindaellison899]

cool!

[@foopadr9076]

Kid is smarter than 99% of adults.

[@josewells6390]

Playing a song we can all hum along too! #IMPRESSIVE

[@omfg9899]

I can’t help but ponder. What would happen if you placed this in a vacuum? Then lowered the temperature to absolute zero. Obviously there would have to be some material changes but to me at least it’s an interesting thought.

[@TINBED291]

great work Can I pay you to make a small 8kwh system ?

[@tjacksondolph4026]

can you hook that up to an alternator?

[@350pauli]

Very interesting motor I had a similar idea using capacitors between coils that are controlled by Reed switches times by magnets but this seems to do the same thing ..I think.. like a motor within a motor ? But obviously the aim in all these things is to create an excess of the input that’s able to sustain a load that will trickle charge batteries … if your making things like this at your age with your dad now and you understand it then imagine what you’ll create in your life … I would love to know what the excess of this is able to draw or if it comes to a stop when a load is applied ?

[@dukejet6997]

Yes I have the same idea with capacitors and mag switches. Been a long time away from the work bench for me... inspired...

[@350pauli]

@@dukejet6997 did you do it I haven’t had a chance been busy with the garden

[@dukejet6997]

@@350pauli only to prove the concept mate. Was a one Pmag on a bicycle rim, a bolt wound with copper wire for the drive mag timed with reed switch. Was powered with a AA battery. Ran for over two weeks. Click,click,click as it ran away in the shed..

[@350pauli]

@@dukejet6997 that’s always been a theory of mine with a capacitor and Reed switch discharge like anything apply a load and it’s likely to stop though

[@noelwellstead8744]

Hi Daniel, awesome work. I would like to know what torque and RPM you are achieving from your motors.

[@ionascunina3101]

GALERIUS VASILE PELASGUL,MOLDOVA,cet.DECENEW: DANIEL RODOM IZ CWANTOVOGO MIRA ,ON DONESET DO NOWÂH LYUDEY ZNANIYA BOGOV ! САЛЮТ,ДАНИЕЛ ! В МОЛДОВЕ ТЕБЯ ПОНИМАЮТ ! УДАЧИ ! ЛЮДЯМ НУЖНА СВОБОДА ,ОНА ОТ БОГА ! А С НАМИ,- БОГ !

[@NeoMK]

Depends on how much current the motor is drawing.

[@sinayazdan2333]

is that muller motor generator?

[@arcegerardo2001]

lindo aparato para hacer ruido! ahora energía infinita nada! porque no eliminas las baterías?

[@coadr93]

Hi, Daniel. Great channel and great work :) Why do you call it free energy? From what little I know about physics, that's impossible, isn't it?

[@DanielsInventions]

We have not invented these motors, they've already been invented 20, 30 , and 40 years ago. The inventors claim 7-1 ratio input to output on one motor and 4-1 ratio input to output on another motor. These patents are free to download online. We only attempt to duplicate what they've done to test the concept of operation. Here are two patents that you can check out for yourself, read it and see what you think about it however, you do have to do some testing to see what's going on. Patent #1: ELECTRICAL MOTOR-GENERATOR GB2282708 Invented by Robert George. Published 12/4/1995. Patent #2: A System for Controlling a Rotary Device Issued October 7, 2003. Lutec 1000. Both patents are invented in Australia.

[@cesarranolo9215]

@@DanielsInventions is this robert adams patent?

[@gerarddugas6224]

NOTHING IS IMPOSSIBLE IF IT IS FIGURED OUT. LIKE VOTING TRUMP OUT OF OFFICE :^)

[@ovidius2000]

AshaAmFostPacalitziDeSistemSiScoala.IncercSiEuSaConstruiescCateCeva,DarResurseleSuntLimitate.

[@messengerofgod2788]

And still not found a perfect overunity working module with complete circuits and all parts description of sizes etc. that can produce enough KW to load a house with REAL free energy.

[@khushpagare3556]

😮wow❤

[@gionny7377]

This engine is not for sale?

[@victoryfirst2878]

What I am wondering is how long the magnets will stay energized in the machine ?? How much did the machine cost you Daniel ???

[@4v4t4rmusic]

long time

[@4dirt2racer0]

we need to get u a teleprompt :p

[@rockon1122]

What is watt in watt out? Why they call this overunity?

[@jhewitt8143]

OK, I'm willing to give you a chance, the motor is of good design, simple, not over-complicated, now you also claim the electromagnetic field energy can Be Recovered to continuously power the motor, this implies at some point you should be able to remove the initiating power source (the battery), but it looked like at no point was the battery actually removed from the system and the system remained stable, do you have any corresponding data ??? such as detailed circuit schematics, materials, videos of failures of previous designs and the changes you made to fix any issues or improvements ??? what is the Voltage and Amperage of the motor itself, is the motor AC or DC, what is the power output of the recovery system of coils (assuming they are separate from the powering coils), what have you done to stabilize the AC output of the recovery system before routing it to power the motor ??? * If you want to be taken seriously, as a person who has solved the issue of efficiency in Overunity designs involving magnetic systems, where so many have failed for well over a hundred years, you need to make as much information freely avail. to the public so that your data and design/s can be evaluated for viability and practicality, ect., until then, as you have no doubt seen on many "OU" sites and KZbin pages of similar devices, most of the world's society & scientists are all too easy to deny such claims, at times even rude, vulgar and/or verbally violent (so to speak). I highly suggest taking your device and all corresponding designs and data to the electronics engineering departments of your local colleges (more than one preferred), make an appointment to see some of the teachers at each, do not tell them it is an "Overunity" device, designate it as an "Efficiency Design Experiment", show them the base design schematic for the motor system, then provide the alternate, "updated" designs, pointing out the specific additions and differences, but again, make no mention about "Overunity" or "Self Sustaining", let the expert determine what effect the alternate designs will have on the base system, after the design is evaluated, let the expert see the device in operation. again, you may have to go to several experts in the teaching field before some agree to evaluate your design/s, get as many as you can and have these evals. put into writing, some may even charge you for their time, do it, corresponding, detailed data and the certification by an expert in the teaching field will help you greatly in earning some respect and opening some minds of those who were automatically against you, simply because you associated the words "Overuntiy", "Self Sustaining" and similar phrases. Good Luck to you and your team !!!

[@ric1ric1ric]

My condolences

[@ucanegnor]

are coils bifilars? there is not Lenz effect, isn't it?

[@DanielsInventions]

They are also effected by Lenz's law but the collapsing field energy coming back out of the coil is not effected by Lenz's law.

[@wesbaumguardner8829]

If it is true over unity, how are you powering it down? Shouldn't it just keep going off of its own electromagnetic field?

[@phyzxengrmoore6928]

Whats the COP parameters?

[@casperspitbull]

Way to go kid if u put some peller blades in there you might have just created a UFO like the motor off the first avenger movie in that flying ship that iron Man had it fixed or save them with

[@UltimateMadWorld]

Daniel keep going with this young man, you are an absolute genius kid! As you get older don't let distractions from hustlers, dodgy corporate and federal government tycoons get anywhere near this! Be vigilant kid with these endeavours and remember Daniel, this isn't your average science project for school, this tech such as the Bedini motor for example has the potential to annoy alot of rich grown ups with croaked intentions sadly! These energy projects are what the world is being deprived of whilst the incredibly croaked rich get more incredibly richer as the working classes get more poorer! The energy wars are upon us all Daniel, so be prepared, be ready and be strong kid! Your an incredible young man, keep at it young sir! 👍

[@saeed21kia59]

Hello, very beautiful Send me the diagram of this eng

[@rexgeorg7324]

I type in overunity engine and come up with this as top search HaAhahahahahahahahahahahahahahahahahh ,, no offence young man hahhahahaha

[@sgys22dgys15]

На искроовик переводи его .та шипований ударний ротор )600±мгрц+ ток ротор другий будет.принцип тоже

[@jameselliott9397]

Now there is a better way thanks to my new discovery. Check this out and you will spend a lifetime perfecting it.

[@jameselliott9397]

@N01Spl Sorry, I took it down temporarily. Its not relevant to anything I have posted.

[@prmajiq]

just brushless motor nothing more

[@toffeeflavour]

Don't let the trolls get to you! I wish I had parents that would explore the inventions with me. Great build, not many people invest the effort. Yeah this is probably an unfinished concept motor missing the key to the cold electricity, but who cares, you did it anyway! Cheers JP

[@4dirt2racer0]

THANK YOU!!! OMFG THANK YOU!!!! im so happy to finally see somebody calling these exactly what they are, a motor.. not n "over unity" lmfao :P if your smart enough to build the device your smart enough to know how it works, which means the guys trying to spread the "over unity machine" bullshit know its exactly that, bullshit.. which means theyre wanna b scam artists

[@baddinosaur1548]

Do you ever watch your videos before you publish them. THE MUSIC TOTALLY DROWNS OUT THE KIDDS VOICE. Is it just me, but if I was letting my kid run something at that high of an RPM, may safety glasses are in order. Just saying.

[@edbam1976]

an improvised bidini motor

[@ak47bobbarke]

You are smarter than i am kid lol

[@dorel49]

I sent you an email. but no body answer

[@JF32304]

Hate to say it but the efficiency isn't there. Nice build though.

[@MREVERYTHINGEXPERIMENTS]

like time machine hahaha

[@mukamadyahya2579]

Subscribe for you

[@vocedelpadrone7445]

Big FAKE !

[@boriskorosec5546]

Morda pa res

[@WIZ56575]

Hey like your invention but I need you to understand something and then explain it to me one Did you create the word opportunity if you did congratulations, comma if you didn't then please give a fool it's give a full definition and explanation on what overunity actually is she is no using the cop out more power out than in. Everyone says that but no one can give a definition which explains The word itself Once someone has a true definition true definition and in that definition when published in a dictionary will explain indwe'll explain in detail step-by-step what's something is like take for example a car what is the definition of a car and then someone says you drive it is that a definition or is a definition saying a car is a veil Which has 4 wheels or 3 power powered by a motor which in turn gives you greater momentable across land To travel faster and more convenient most cars have Coverings to protect you from weather Most cars work on combustion engine even though electric cars are acceptable to be in the definition of cars of course now I could go on hours and hours explaining what a car is so people get a good understanding what it does And how to recognize it when they see it so so all I'm asking you to do is the same how do you know it's over unity if you can't do that. This Comes from the person who actually created over unity

[@davidgill3356]

You created over unity? Wheee is it?

[@WIZ56575]

@@davidgill3356 Excellent question , Here's the question for you suppose I'm not the person who created over unity are you the one who created opportunity if not how do you know what it is, I often ask people this question because I did create over unity it came from my teachings of Buddhism to simply tell you where it came from Is over a 1000 years old, A bicycle is over unity you are over the bicycle you power it. Then you alternate your legs to give it Forward motion and the cranks multiply that motion into a power that you use this is over unity. If you take this example you will understand that Alternating anything Is the basis of the overunity I created what's the difference between the 2 the bicycle like I said was never called over unity it was called cycling which has to do with opportunity when I was a teenager long time Ago. Has anyone done this with batteries My physics teacher at the time said no so I wrote the laws of overunity 2 represent my idea of an old concept made new. Now we have Alternating DC curren The thing that Is directing the battery flow is a computer,It switches back-and-forthTo create alternation just like in the example for a bike this computer controls how fast it will alternate and therefore acts like a motorBut the drawblike is that you still have to have energy coming in to charge the batteriesCome now why do people say more power out then in physics physics this is impossible but when I showed this in my physic class it's made sense to my teacher if the batteries are full and you use 1% of that battery in what we call time Measurement Or you can use Hertz or frequency, When you use the battery that's going to discharge you get the full charge of the battery no hold backs that's why we call it direct power but if you only use 1 second of that battery because of its capacity how long do you think it will take to replenish it to 2nd 3What you'll find out is that overnight in this way acts as a pumpTo push energy at a level or a constantWhile taking in very little energy because the batteries are all the way saturated. If this concept doesn't work then the concept of bicycles in itself does not work water wheels do not work nothing that uses a flow Calls is something to turn should not work, your work is so close to overunity this is why I said and do you know what it is name your projects if they're yourso again I asked you the question are you the one who created over unity, we both know the answer cause overunity is older than you by far. Take it from an old man you are creating and doing good work keep going not everyone is out to trick or lie to you Thank you for your comment.

[@davidgill3356]

@@WIZ56575 OK thx

[@WIZ56575]

@@davidgill3356 Sorry about all the misspelling I'm in the beginning stage of old timers, I am trying desperately to get all my work written in books correctly Although The computer sometimes does not write what I say or I just simply miss speak, Again you're doing a great job and you'll find the answers you've been working on I'm sure of it you're on the right path good luck

[@timewellwasted3341]

Congratulations! You've built a fancy motor! Overunity is impossible. Does this kid even know what he's babbling about as he reads the script like Joe Biden? Why not make some cool legitimate projects? For example make a ram water pump and explain how you get "free" energy from the unit......

[@todddogg7817]

His IQ is probably like 300 and he even makes the kids that lived underneath the college university in the 1980s movie "Real Genius" look stupid. Obviously, when you know all the secrets of the universe like this amazing boy, probably the smartest person in the world, free energy is child's play.

[@timewellwasted3341]

@@todddogg7817 I'm guessing that his dad writing the bombastic script and making the kid read it is some form of child abuse. If the kid doesn't believe in the free energy wheel, he'll get a beating.

[@davidgill3356]

@@todddogg7817 And you have nothing to support any of this but wishful thinking. Do you actually believe this is over unity or self sustaining?