Overland Truck Camping Setup for UNDER $200 Dollars!!! | Toyota Tacoma

My “Overland” truck camping setup! A brief down and dirty look at how I set my truck up for camping and everyday use.
Supplies used
2- 2x6 57 inches
2- 4x8 sheets of OSB cut down to 28.5 inches wide by 69.5 inches long
All left over wood was used to make the drawer.
Drawer dimensions: 70 inch long x 22 inches wide x 6 inches tall
Outdoor carpet: www.lowes.com/...
Glue:amzn.to/3bXaXMA
Bed: amzn.to/2YlzfvD
Bedspread: amzn.to/2ydjJHy
Bed cover: amzn.to/3aYIN2F
I love the outdoors and making a camping setup that is always ready to go was super important to me, but I set want to make it so my truck can be used everyday for the everyday things you need your truck to do. I think this set up does just that. It isn't super fancy, but I managed to do this build for under $200 bucks the wood with the carpet was just under $100 bucks and the bed (Milliard 4 inch Full Tri-Fold Mattress) was around $100 dollars. It fits perfectly and offered a good nights sleep up off the ground. If you are into overlanding, camping, or just want to get outside more this is the perfect option.
Camper Shell is the LEER 100XR
Lift: Icon Stage 5
Tires: BFG Ko2 285 70r17
Wheels: Fuel Vector
Subscribe
Tap that like button
Hit that notification Bell
📸Follow me on Instagram-
/ offroadodyssey
🐣Follow me on Twitter- / offroadodyssey
🙊Join the Discord- / discord
Links to help support the channel.

[@AngelRodriguez-ty4ki]

Sweet truck, looking to buy my first this vid helped. Instant subscribe

[@TrentMMoore]

Awesome man glad to hear. If you have any future questions hit me up in the comments. Thanks for the support!

[@hebdomatical]

An unpretentious KZbinr, what a relief. Not full of some meaningless music until the end.

[@TrentMMoore]

Thanks for the support! I try and keep it real thanks for watching 👍

[@knottstilting]

That shell is the best, carpeted for warmth and keeping moisture out, and hinged side windows for access to the bed. Nice setup, simple but functional - saves money over something like a decked drawer system

[@TrentMMoore]

Glad you like it. This set up has been awesome. Just yesterday I was able to load 133 studs for framing on the bed platform with no issues. Thanks for watching.

[@rolylugo9106]

Do you have a problem with water getting in the bed and wetting the platform ? Asking because I’m debating on wether or not to get a shell for my truck

[@TrentMMoore]

No I haven’t had any problems. That is not to say you will not, the dealer I had install my shell told me the windoors are very prone to leaking so they may start leaking. The only place I have had water come in from is in between my tail gate and when opening my shell the back door. The tailgate issues is fixable you just have to purchase tailgate dust guards. The back door will allow water to drip in when opening it nothing have seen to fix that.

[@rolylugo9106]

@@TrentMMoore probably isn’t anything to fix the problem when you open it. Thanks for the response and the tips . I was just more concerned about the wood getting wet and messed up . If it doesn’t get that wet in the back than it should be fine . Thanks for the reply

[@fire58372001]

I've been truck camping off & on since the 80's I like what you've done with your rig. I was able to outfit mine with scrap wood & odds & ends from home for

[@TrentMMoore]

That’s awesome to hear. Sometime the simplistic set ups are the best.

[@ahmedhilal6835]

I have watched others on youtube who do what you did for thousands of dollars more yet both achieve the same goal. Great video and inspiration. Keep it up and wish you the best of luck.

[@TrentMMoore]

Thanks I appreciate that! Definitely try and save the money while doing the research to make the best possible setup. Appreciate the support!

[@laurareutter6928]

I can highly recommend affixing a thin laminate of some sort over the ridged section of the tailgate. Then you will have a smooth surface to work on, like for cooking! It is also easier on the knees when you climb inside and that area won’t collect dirt and dust. I used 1/8” (?) plywood affixed with industrial strength Velcro, so it comes off easily. Several coats of polyurethane varnish will protect it from rain and spills.

[@laurareutter6928]

It could also be thicker material like 1/4” for a more durable surface.

[@TrentMMoore]

Awesome idea! I am looking into replacing it I have seen a few out there that make them into cutting boards. I didn’t think of using plywood. I might try this. Thanks for watching and commenting.

[@phantomcreamer]

​@@laurareutter6928 For the long bed version yes, but if you have the short bed version and a crew cab, I would want every 1/8th inch I could get

[@stitch4785]

Wow someone who makes a nice video, and explains it??? While being budget friendly?? AND includes LINKS??? Sub.

[@TrentMMoore]

Thanks for watching I appreciate the support.

[@joegorash6096]

I love your set up! I was thinking of going a different route with the interior of the bed but i love how simple and clean your setup is! Ill probably be going the same route and diy it. Will definitely save me a lot of money as well. Cant wait to see more videos of it! I would love to see some camping vids 👌🏼

[@TrentMMoore]

Thanks for watching ! This was definitely the most cost effective for me. I do plan on trying to build the drawer out of 80/20 t-slot aluminum and that will make things lighter and give it a nicer look but for now this set up is great. I will definitely have some camping videos coming out this summer.

[@joegorash6096]

Yeah that’ll definitely lighten things up. Keep us posted with that build when you do! Can’t wait for the camping vids!

[@TrentMMoore]

Will do. Thanks for the support.

[@lawrencelee2599]

@@TrentMMoore I love your setup, and I’ve looked at an awful lot of variations. If you read this, as it’s been awhile sine you posted this, PLEASE. let me know if this is the Short Bed or the Long Bed?

[@TrentMMoore]

It is a long bed. Yeah it has worked out great been using it a lot while traveling the last few months. I have some plans in the works to make minor changes but over all it is a great setup. Thanks for watching !

[@MadskillsBeatz]

Nice setup. Straight to the point! I subscribed.

[@TrentMMoore]

Awesome thanks for the support!

[@madcratebuilder]

You decked system is as good as the $1200 ones, amazing how much you can store in the drawers.

[@TrentMMoore]

Thank you. Yeah can’t wait to do an aluminum build out really optimize the space. Thanks for watching .

[@user-zi6ey8ws5e]

I have been debating whether or not to switch out my 2004 Tacoma for something else. She still runs like a champ with over 210k miles but she is starting to need minor repairs/replacements, both functionally and aesthetically. But don't we all!! Haha. 😉 I do, however, anticipate more moderate repairs / replacements to come up sooner than later. All that being said, your video kinda validates why I should maintain her, keep her, and reclaim my truck! Thanks. I might finally be ready to go mobile, eventually, thanks to your instructional video!! 🤗 Eye on the price.

[@TrentMMoore]

Awesome I am glad I was able to help. I like the 04 Tacoma’s, with a little TLC it would make a perfect camping rig. I found projects on my truck make me like it that much more. I plan on keeping my Tacoma for a long time I feel like Tacoma’s have this U shaped curve of desirability. When they first come out everyone wants the new one then the hype dies down and then in like 10-20 years people are searching for them again. Or at least that what I found for the last 2 Tacoma’s I sold. Anyways thanks for watching.

[@brentmoreland2623]

Cool set up! I’m getting my tacoma in about 2 weeks… this gives me some great ideas to starting rigging it up. Thanks!

[@TrentMMoore]

Hopefully you got your Tacoma and you are starting to get it all set up. Thanks for watching!

[@DesertNach0]

Another great video man! I watched your other one comparing the Leer to the ARE, and definitely helped me in my choice to get the Leer 100XR. Much appreciated!

[@TrentMMoore]

Awesome I’m glad I can help. Enjoy the new LEER shell. Thanks for the support!

[@Taylorlmorgan]

Looks like you need more videos like this one!

[@TrentMMoore]

Yeah need some buddies to buy similar trucks so we can go out camping… haha

[@Taylorlmorgan]

@@TrentMMoore good thing I’m buying a 4Runner hopefully soon

[@seanpuello]

sweet.... now all i need is a camper/topper for my tacoma...

[@shaunramos9878]

Dude this was sick !

[@TrentMMoore]

Thanks for watching! Glad you liked it!

[@markloechner9409]

I have been wanting to do this to my f150 but the cost of lumber lately wow. Thanks for sharing your layout

[@TrentMMoore]

Yeah it’s pretty crazy prices have gone up a significant amount. Thanks for watching!

[@kameya87]

Yea, I'm thinking of doing a no build build because of the wood prices

[@ItsmeCote]

Amazing stuff man. U convinced me with the camper shell > RTT

[@TrentMMoore]

Good to hear. I plan on looking harder at the roof top tent in the next year or so, but I think the camper shell is definitely the way to go if you are starting out. Thanks for watching!

[@ItsmeCote]

@@TrentMMoore I just ordered my camper shell today and added the tracks for a future RTT project. I wanted to go with the XR and the windoors like yours but felt in love with the XQ instead...

[@TrentMMoore]

That’s awesome. Do you have an instagram you post on? I would love to see how it turns out.

[@ItsmeCote]

@@TrentMMoore Ya man @itsmecote. I don't have much pics of my taco yet as I just bought it and getting started into overland vibe. Add me and I will follow u back.

[@TrentMMoore]

Sweet just followed you. Look forward to seeing you post some overland stuff.

[@scareware24]

Watching just down the road from Tenaja Falls!

[@TrentMMoore]

Love that area. Spring time is one of the best times to go up there in my opinion. Thanks for watching.

[@scareware24]

@@TrentMMoore Any idea if you could truck camp out there?

[@TrentMMoore]

There is a USFS road out that way that you can take and it appears there is camping out there. Not 100% on that but people were camping out there when I drove out there.

[@TrentMMoore]

Whats going on youtube hope everyone is staying safe! Leave a comment and let me know what things I should add to my set up my goal is simplicity with this set up and so far it has been working great. Enjoy the video! - Trent

[@jayleecarlisle]

What's the camper shell brand?.. love the ability to open the side windows.

[@TrentMMoore]

It’s a Leer 100xr, I did a write up over on offroadodyssey.co . The windoors are awesome saved me from having to crawl to the back of the truck.

[@AllTerrainFamily]

Looks nice! Hope you set that fuel can outside while you sleep in there. The OSB is durable and stiff, but really susceptible to water damage and heavier than plywood. It also off gasses a bunch when it's fresh. Great setup though!

[@TrentMMoore]

So far it has held up great. The carpet it’s pretty water resistant to the little amount of water that has got back there. If I was to do it again plywood would be the way to go. Usually that fuel can is not in the truck but I don’t sleep with it in there . Thanks for watching!

[@Kadenventures]

Good video man, I've never seen a tri fold bed like that lol good find

[@TrentMMoore]

Yeah it works well. I’m testing some other beds video will be out soon on that. Thanks for watching!

[@Kadenventures]

@@TrentMMoore Nice! Looking forward to it

[@jeromereyes584]

Great work, bro! Digging this set up. Cost effective and good looking.

[@TrentMMoore]

Thanks for watching and commenting I appreciate the support.

[@haroldrull4943]

Nice set-up, as I’m just looking for ideas on doing my truck camper shell prior to hitting the parks..

[@TrentMMoore]

It is a great setup for national park or really anywhere that has a campground to just set up and then head out and explore for the day. Thanks for watching.

[@jeremydowdy2821]

You should screen the shell windows! I’m going to need more videos of this set up

[@TrentMMoore]

Working on some sort of magnet screen for the windoors. It would also have a fabric to block out the light. I have been out backpacking and visiting family so I will have some videos out soon. Thanks for the support.

[@jacedalton5038]

Do you have the long bed or short bed?

[@outdoorenthusiastenl4907]

Great simple setup. How do you secure your truck topper from the inside for security when you’re sleeping?

[@TrentMMoore]

Most the time I am not to worried about it. The areas I camp I would normally be tent camping to I feel this is just as safe but with this camper you lock it from the outside and close it. You could also take vise grips to the rotating portion of the lock and secure it in place. I plan on doing an electronic lock in the future, seems like the best option.

[@hikerJohn]

I don't know if it was mentioned but you can vacuum bag the foam mattress to shrink it way down for storage.

[@TrentMMoore]

Good idea I’ll look into that.👍

[@kathy0698]

Pretty nice setup! Trying to figure out a solution for two people. Right now I have a tonneau cover, but possibly going to get a topper.

[@TrentMMoore]

The topper is an awesome option for 2. Definitely would recommend it.

[@jjmack8233]

Great setup! Cheap and fun! Very smart! Where did you get that mattress? How much was the mattress? Thanks for sharing.

[@TrentMMoore]

Yeah it has been a great set up. Works out good the the weekend warriors and those who want to overland full time. The mattress should be linked in the description, it is a Millard trifold from Amazon. Thanks

[@jjmack8233]

@@TrentMMoore ...thanks for the reply. Best of luck

[@yevhenvorotylko257]

Your lucky to be able to find a trd off road long bed.... in my area they only come access cab with long bed, or trd sport is your other option if you want to truck camp. I had a sport, started my build and than it get stolen so I got off road now but it’s short bed :/ guess rooftop tent it is lol

[@TrentMMoore]

Yeah I had to travel to Oregon to buy this one but it was about $4000 cheaper then in my local area. They are pretty difficult to find but the short bed Tacoma’s are still awesome. Thanks for watching!

[@timsilva1944]

Yep, the camper shell is key. Although if you are traveling with friends, you will find that more space is needed for gear and coolers, etc. Also, that wood becomes a hindrance for hauling large items when not camping. Good execution though! Food for thought...

[@TrentMMoore]

Yeah plan on getting a roof rack for more room, but I have taken 4 people on a 4 day trip and it was tight but we made it work. The wood definitely can get in the way but the last few times I have had to load anything in I was able to pretty quickly remove the platform. Definitely will keep that in mind as I keep working on the build.

[@timsilva1944]

@@TrentMMoore Yes Sir, been thinking about a roof rack myself. Would be great for a rocket box or kayak. Maybe bikes if vertical clearance isn't an issue, but there's hitch racks for that.

[@sooweeq123]

Add a solar vent fan atop your shell to minimize interior moisture.

[@TrentMMoore]

Yeah good idea I have thought about it. I just need to find a low profile vent so I can put a roof rack on. Thanks for watching.

[@jkallday6850]

Awesome buddy 👍👊

[@TrentMMoore]

Thanks for watching!

[@daveclay6091]

Hi, great simple build! I am doing the same, just wondering the product you used to wrap the plywood? Thanks

[@TrentMMoore]

EcoRug is the brand name I bought it at Lowe’s for like $25. I just cut it to size and glued and stapled it down. It has held up great so far.

[@StrictlyPlinking]

Subbed. Will try your set-up for my Tacoma. I will start with the sleep system. Damn, I just wish I had gone with long-bed back in 2015. Still love my rig though.

[@TrentMMoore]

Thanks appreciate the support. Let me know if there is anything I can help with.👍

[@StrictlyPlinking]

@@TrentMMoore 10-4 👍🏼 The 2 pc plywood that goes the length of your bed, did you cut them yourself? One challenge I’ll have is I only have a circular saw vs a table saw. I’ll ask my local Lowe’s if the have cutting services.

[@TrentMMoore]

I had Lowe’s cut them for me. Saved me some time and easier to transport.

[@douglansburg4545]

Simple and sweet ,bet it works very well

[@TrentMMoore]

It works very well. Thanks for watching!

[@MrMharley]

Great truck and setup and cost efficient 🇺🇸👍🏻

[@TrentMMoore]

Thanks for watching! 🇺🇸

[@andreasm2882]

I practically did the same thing about a year ago. I have a softtopper so I coated my plywood with bed liner so it can get wet. Good job.

[@TrentMMoore]

Awesome that’s a great idea. I was thinking about doing that just to add some waterproofing. Thanks for watching.

[@MauricioPorrasPlazaPonte]

Very nice pick up truck.

[@missbrookeangelina9578]

Thanks for your help! I love your setup!

[@TrentMMoore]

Glad it helped. Thanks for watching!

[@TurinJawn]

This looks great. Is this a 6ft bed?

[@bquade70]

And ya can tell your wife ya saved $20k. Rediculous what a good small camper costs- Lake Havasu-. 👍👍

[@TrentMMoore]

It’s pretty crazy the cost but it’s cheaper than a trailer that’s for sure. Thanks for watching👍🏼

[@SaintJames40]

The beds only 5ft. How are you sleeping in it? You’d have to leave the tailgate and cap door open? This is something I’ve been wondering about. Even if you wanted to stealth camp you couldn’t.

[@TrentMMoore]

It’s a long bed, so the bed is 6ft long. I am able to close the tailgate no problem.

[@SaintJames40]

@@TrentMMoore oooh im wondering that the 5ft bed people do

[@TrentMMoore]

Yeah same here I know some people sleep diagonal.. not sure how comfortable that would be but it’s an option.

[@Mrpjvr29]

Hey buddy! Nice set up! Do you fit in it? I’m 6 ft was wondering if I’d fit in a set up like that. Cheers👍🏽

[@TrentMMoore]

If you have the 6ft bed you should fit. It would definitely be tight with pillow and bedding but if it is for a short period of time it’s not bad. Thanks for watching!

[@Taylorlmorgan]

What are your thoughts on roof top tents? Sleep on top, and all storage in the shell?

[@TrentMMoore]

It’s funny you ask... this will be covered in the next video .

[@suppaduppa5]

Sweet setup bro. You got a 5 or 6ft bed?

[@tristan_hks5203]

I was looking for the answer two. But I’m going with a 6ft

[@TrentMMoore]

This is my most asked question. It is a 6ft bed. Thought I had it in the description must not have. Sorry for the delayed response. Thanks for watching!

[@reyscottm9]

I'd be interested in seeing how you built the base for your platform...

[@TrentMMoore]

Alright I’ll put together a video here soon. Thanks for watching .

[@stufoo]

you need a roof rack for that jerry can if you plan on sleeping in the camper

[@TrentMMoore]

Agreed. Although it’s empty just needed it to fill up my lawn mower. I pulled it from a pile of stuff off my old Jeep. Thanks for watching!

[@gov683]

Good ideas

[@TrentMMoore]

Thanks

[@kylemcgrath2108]

where did you get this matress? just built something similar and I can’t find anything to fit my 6ft tacoma bed

[@TrentMMoore]

It is a Millard trifold mattress from Amazon. It is technically an inch or two long but the tail gate still closes.

[@buenavida5628]

Nice set up need one !!! What material is used for wrapping ??

[@TrentMMoore]

It’s called ECO Rug I bought it from Lowe’s. All the info for the build is in the video description. Hope this helps, thanks for watching!

[@DanielLittle318]

I'm looking to buy a Tacoma but I'm six foot and am worried about the sleeping. Do all the beds come in six feet when you have four doors? Also what year is yours?

[@TrentMMoore]

If you are 6ft it is going to be tight. If you don’t build a platform like I have it will definitely feel like you have more room. If you are using it for occasional camping think of it like a tent, you don’t have a ton of room in a tent but it still works. They come in 2 bed lengths long (6ft) short (5 1/2ft I believe). You will just have to check that it is a long bed which seems to be less common. I have a 2018 TRD Offroad long bed.

[@DanielLittle318]

@@TrentMMoore alright thanks man! Love the set up though now subscribed.

[@Zachpaca]

What kind of sleeping pad did you use? I have been struggling to find a good fold up sleeping pad that fits the dimensions of a Tacoma truck bed.

[@TrentMMoore]

It’s a Millard Tri fold mattress. The link is in the video description, if you want to spring for a bed that rolls up you can get the Exped double bed they will fit in the bed of the truck. Hope this helps thanks for watching!

[@diliano243]

Hello, are the side windows an addon? All 100xr I find only have the slider window option as I am trying find the upward opening side windows like you have in this video!? please let me know how to locate this option ! Thanks! Good video

[@TrentMMoore]

Yes the are an add on. They are called windoors. The ones in the video are vented windoors. You will have to either order the shell from a LEER authorized dealer and ask them to build the shell with windoors on the shell or if you find a used shell for a cheap price you can buy the windoors from LEER and have them installed on that used shell. I did not do the second option because the price per window is $450 without installation and for that price it was worth it for me to buy the shell I wanted with all the options I wanted. Hope this helps. If you have any other questions let me know appreciate you watching.

[@myfantasticvideos]

Thanks for sharing! Will do exactly this!!

[@TrentMMoore]

Happy I can help.

[@jushthededguy4624]

I am doing this when I get a truck

[@TrentMMoore]

Awesome! Hit me up if you have any questions in the future. Thanks for watching.

[@aja1st]

My question is what bed do you have? The short bed or the long bed? If you have the short bed how comfortable is it sleeping in? My problem is my bed isn't long enough and I have to sleep all sideways and curled up. (I'm 5'10)

[@TrentMMoore]

It’s a long bed. Probably the most common question I get, long bed is tight but comfortable (I am 5’11). Short bed would work in a pinch but not the most comfortable. Thanks for watching.

[@lnto]

Good idea! 멋지게 잘 만들었군요..즐거운 캠핑되세요

[@TrentMMoore]

Thanks

[@MarioMartinez-is1cg]

Good setup and very informative. Only thing is I can hardly hear you bud. Thank you though great video

[@TrentMMoore]

Thanks! Working on the audio situation slowly trying to improve it. Thanks for the support.

[@hendynv]

Hi. Thank you for the video. 1. Do you sleep diagonal across the bed (I'm 5' 7"). 2. Do you close up windows back window on camper top when sleeping?

[@TrentMMoore]

Thanks for watching! It is a 6ft bed so I can sleep normally in the back. I close the back window most of the time but I have slept with it open if the weather is too hot.

[@rich_v]

Nice set up man! Im thinking about doing a similar set up for my tacoma as well for next spring and summer cuz I'll be doin a lot of solo camps and fishing trips. I got a question tho. Does your shell or canopy leak when it rains? I noticed mine leaks a bit at the top two corners and at the back where my light is. I'm hoping I can find a good way to plug up the leaks and hopefully it won't be too much of a problem for the wood n stuff.

[@TrentMMoore]

I did a leak test video check that out. My truck is pretty good at keeping water out they used a thick putty that seems to be holding up well.

[@rich_v]

@@TrentMMoore thanks! I'll check it out!

[@earlsworth7952]

Nice set up bro!

[@TrentMMoore]

Thanks appreciate it.

[@Xr3737]

What are the 2x6s fastened to on the bed? I may have missed something there. I know newer tacos have lot of options for accessories to plug and play but for an older truck with just a wheel tub on the side walls not sure how it fasten.

[@TrentMMoore]

Along the side of the bed there are 4 indents, so I just cut away part of the 2x6 so that it would sit flush. If this doesn’t make sense let me know I will make a quick video on it to explain. What year is your truck?

[@frankyq21]

Do a video about your leer cap pls.

[@TrentMMoore]

I have a couple on my channel. What are you wanting to see?

[@carypeaden4147]

Is the 4" of foam in the bed enough, or do you wish you would have gone with 6" of foam?

[@TrentMMoore]

I have found it comfortable. If I had more room in the bed of my truck I would go with a thicker bed because it couldn’t hurt to have a thicker bed. Thanks for watching!

[@BourbonSauced]

maybe install one of those camper fans to vent?

[@TrentMMoore]

Thought about that not sure I would want to cut into the shell to put a vent if that’s what you are talking about? Definitely plan on getting some sort of clip on fan to put in front of the window. Thanks for watching.

[@Nwvibes42]

What’s the name of the foldable mattress and is that a queen or double? Thanks

[@TrentMMoore]

Millard Tri fold link should be in the description. It is a double I believe. Thanks for watching!

[@instantwagner]

Is this setup better with a 6’ bed? The 5 foot bed I think would be too cramped.

[@TrentMMoore]

6 foot bed. 5 foot bed would be tight.

[@instantwagner]

@@TrentMMoore that’s kinda what I thought. I’ve been looking for a four door 6 foot bed Tacoma. Thanks for the reply

[@samfisher5302]

Question - Does your Taco have the 5 ft bed? If so, What's it like sleeping in the shorter bed? Do you have to sleep diagonally??

[@TrentMMoore]

6ft bed I am 5 ft 11 in and generally do not sleep with my legs fully stretched out so I have no issue. Wish I could answer your question about the 5 ft bed comes up all the time.

[@samfisher5302]

Offroad Odyssey Thanks for the reply! That helps a lot 👌

[@Crossaxle]

Would have been good to see you use it so we have an idea of room. How tall are you and do you have to sleep diagonal?

[@TrentMMoore]

I’ll keep that in mind for the update video. I am 5’11, I do not have to sleep diagonally 2 people can sleep back there pretty comfortably. Thanks for watching .

[@bil4lo1]

It looks like you have the short bed... isn't that only 5'5" with the tailgate shut? Or is that the long bed?

[@TrentMMoore]

It’s a long bed.

[@richardjamet1774]

Great set up👍

[@TrentMMoore]

Thanks !

[@PookaFey11]

Thanks, this was really helpful!

[@TrentMMoore]

Really glad I can help thanks for watching. Check out some of my other videos if you haven’t already. Also I will have a blog post up on the build out tonight. Offroadodyssey.co

[@MrKaNuke]

Does the Leer 100XR come standard with the flip-out side windows? Is this an add on? I’m looking for a camper top just like this with flip out side windows, but all of the ones I see seem to slide only.

[@TrentMMoore]

They are an add-on. If you are buying new just ask for windoors. They are worth the money. I think they added $150 each to the build out, might have been more. Good luck with the shell purchase. Hit me up if you have any other questions. Thanks for watching!

[@MrKaNuke]

@@TrentMMoore thanks! Just got my quote back from Leer. $2000 about with both sides with windoors. Didn’t realize that you could make all these so custom. Thanks for the help!

[@TrentMMoore]

Awesome that’s a good price.

[@JohnShaw26.2]

Do you ever regret getting a long bed? I’m supposed to pick up a 2021 long bed tomorrow and I’m second guessing the bed size now.

[@TrentMMoore]

Nope love it. As a mid size truck it is awesome to have the extra space. If you are only using it to hit the trails it might become a problem. Congrats on the truck sorry for the delay in responding.

[@stupetw]

Hey bud, awesome information. Just a quick one: what size of trunk your tacoma have? Also, what size of mattress you have? The Full or Twin? Thank you

[@TrentMMoore]

The bed of the truck is 6ft. The mattress is a Millard 4 inch 73 inches long you can check the link in the description. It is technically a double which is smaller then a full size bed. Thanks for watching.

[@stupetw]

@@TrentMMoore Thank you man, really appreciate it. Tacomas for the win!

[@TrentMMoore]

No problem if there is anything I can help with let me know.

[@alexneal2642]

how is it sleeping in there? do you wish you'd gotten a mid rise shell?

[@TrentMMoore]

Well it’s actually pretty easy I just lay down and usually fall asleep.... but really it doesn’t bother me if you are claustrophobic I would definitely go with a mid rise shell and even remove the platform. This shell is a good happy medium. If I was sleeping in here for multiple weeks each month I would definitely work on a different setup or look at using a bigger truck. Thanks for watching !

[@Darkpyro372]

Love the video man thanks for sharing!! Took a look at your insta, how do you find where to off-road and travel to? Like how do you find the good spots?

[@TrentMMoore]

I find most of the places word of mouth, or the internet. One of my favorite websites is road tripper. I have found so many great hidden travel spots. As far as backpacking I usually go on IS forest service website find a spot that is available for the days I have off and then just search around to see what people are saying. Maybe I will do a video on how I find good travel spots. Thanks I appreciate you watching.

[@Darkpyro372]

@@TrentMMoore Thanks for the quick reply! I'll have to check out road tripper! You based in SoCal? I am myself and also have a Tacoma I wanna spend some more time camping inside in the future

[@TrentMMoore]

I try and have quick replies. Yeah it is awesome website and a really good starting place especially if you are trying to do some car camping. Yeah I am based in So Cal. If you ever have any questions or are looking for spots to go hit me up I’ll help out if I can.

[@Darkpyro372]

@@TrentMMoore Definitely will man, thanks! I'll follow you on my truck page, it's Sparktac. Will dm you from there

[@TrentMMoore]

Perfect just followed you back.

[@robertlocklear6674]

I really like that setup hope you don't mind if I still it.

[@TrentMMoore]

Go for it, glad you like it. Simple but works well for my needs.

[@roadcruiser2030]

Funny, I am in the middle of creating this exact same setup for my Tacoma, and came across this video! Question: are you sure that is only a 4" Milliard mattress? It looks like 6" which is what I was considering. How comfortable was that mattress for sleeping?

[@TrentMMoore]

Yeah positive it’s a 4” Millard mattress. For the money it is comfortable. It is hard because obviously everyone likes a different firmness of mattress. I would say this is on the more firm side. I actually am in the middle of doing a comparison against the Exped inflatable mattress which I think will be more comfortable for most people. The only thing is it is about double the price. Hope this helps, thanks for watching!

[@roadcruiser2030]

@@TrentMMoore I went for the 6" Milliard and it is very soft and comfortable, though somewhat heavy. It only added 1" of height so I've still got 22" of headroom.

[@TrentMMoore]

That’s good to know. Let me know once you have a chance to use it how it does. I think it would be good to compare the 4” vs the 6” .

[@andrewnewman1894]

Can you do a video on how you got the drawer done? Is it on sliders?

[@TrentMMoore]

Yes I can do that might take a few weeks, but I will get it done. It just slides on a few pieces of wood I cut to. Fit in the grooves of the bed.

[@nkbc5819]

Great ideas.

[@TrentMMoore]

Thanks for watching!

[@henrysmithers888]

Can you drop the specifics on that bed? would love to purchase something similar!

[@TrentMMoore]

The platform or the mattress? The mattress is Millard Tri fold Mattress (link is in the video description) if you are interested in picking one up. It is 73 inches L x 52 inches W x 4 inches deep. The bed I am looking into purchasing is an Exped Double mattress, about 200 dollars more but it will shrink up in size. As far as the bed build I did a separate video on the build. I will do a review on the mattress soon maybe compare the 2 mattress. Thanks for the support hopefully I answered your questions.

[@JakeRoy98]

What bed is that? Nice simple setup

[@TrentMMoore]

Millard Tri fold. It has been great 👍🏼

[@onlinebills9169]

The setup is great. The massive mistake you've done is using materials that emit fumes of formaldehyde. 1) they glue they use to make your wood board, 2) the backing of your carpeting. Even in a constantly ventilated area, those chemical fumes would be present for at least 8 years.

[@BrettEndres]

What materials would you use for the same setup?

[@onlinebills9169]

@@BrettEndres instead of plywood or anything that is "layered & glued together", I would use regular planks of wood. For "carpeting" I would use a layer or a wicker mat to cover the bed of the truck and on top of it, carpeting made of natural fibers. In worse case, a couple of layers of those thick old style wool or cotton blankets. None of these set ups need to look luxurious or made expensivelly. It's not about vanity or showing off to others, but practicality. But if I spend hours in there even just sleeping, I would definitely avoid surrounding myself with toxic funes. Same thing goes for stuff you have at home and especially in your bedroom.

[@arthurbales1701]

Did you use a 4” or 6” Milliard tri-fold mattress ? How much space would I loose if I go with a 6” ? I have the same cap on my Tacoma.

[@TrentMMoore]

I used the 4” tri-fold, I cannot comment to how much space you would lose using the 6 inch mattress but presumably another 2 inches. I have 23 inches from the top of the mattress to the top of the truck cap. Not sure if that is helpful but I went with the 4” because I figured I could always find a mattress topper later if I felt I needed more padding, but I couldn’t take it anyway if I didn’t have enough room.

[@arthurbales1701]

Offroad Odyssey that info is helpful. Thanks. I wasn’t sure how much headroom I would have. 23” isn’t very much so I’ll be ordering a 4”.

[@TrentMMoore]

Awesome let me know if you have anymore questions I’ll try and help as best as I can.

[@billmakesmovies]

Is that the 5’ 5” bed? How’s sleeping in there?

[@chrish.959]

Love it

[@ireland66613]

Cool set up great video subbed. Stay safe

[@TrentMMoore]

Thank you. Appreciate you watching! New video will be out Thursday.

[@boltvanderhuge1273]

Wish this was feasible for me but I'm 6'3 and my bed is 5'6

[@TrentMMoore]

Yeah definitely would not be comfortable. A roof top tent would probably be a better option. Thanks for watching!

[@brianlap729]

what do you do with the black plastic storage containers while the mattress is on top?

[@TrentMMoore]

Typically I place them under the car when I am parked. Most everything is out and the are pretty weather tight so I’m not concerned with them getting stolen or the items damaged inside. Thanks for watching!

[@jqfelly]

Did you make the mattress or purchase it? Looks great!

[@TrentMMoore]

I bought it. It is a Milliard 4 inch Full Tri-Fold Mattress it’s a firm mattress not sure if it will soften up over time. I’ll do an update on it after some more time with it. Thanks for watching.

[@mcdaddy1210]

Hey, I’m looking to start the same project on my Tacoma. I like how you have the 2x6’s running across the bed instead of one or more running lengthwise down the middle. Do you get any sag in the middle with this method? I’ve been going back and forth and this is by far the easiest way to do it. Thanks

[@TrentMMoore]

Yes there is some minimal sag, not enough to cause any issues. I only notice it because I have a drawer that slides under the 2x6 cross beams. If you plan on building a drawer this helps to support any weight you might place in the platform over time. I love this setup and would take the minimal amount of sag over the cost/ effort of adding a support beam down the middle. Thanks for watching. If you want more info bust trentmmoore.co I did a write up with picture outlining in a little more detail. Or you can comment on here if you need any help. Thanks for watching! Hope this helps, good luck in the build.

[@aliciaroyce1669]

I just ordered a Leer shell for my Tacoma. I think I can do your plywood set up myself.😊

[@TrentMMoore]

Awesome congrats. It has been an awesome set-up so far. If you go to Lowes or Home Depot you can have them cut the plywood to the length you need. I left the store with only having to put the carpet on. Thanks for watching, If you have any questions leave a comment or hit me up on instagram or twitter all @offroadodyssey.

[@lorenzo1697]

Can you choose the color for t when you order it?

[@TrentMMoore]

Color for the t? Not sure but the will paint match the shell for you when you order it.

[@sergiorocha1776]

Nice set up, where did you get the foam mattress?

[@TrentMMoore]

Link is in the video description. I bought it off Amazon. It’s the Millard Tri-Fold full size. Thanks for watching.

[@snowplays259]

What’s the truck bed size and how tall are you ?

[@TrentMMoore]

I am 5 ft 11 inches, the truck bed length is 6 ft.

[@Vabasseroutdoors1]

Nice setup! New to your channel

[@TrentMMoore]

Awesome thanks for the support. More content coming soon.

[@jessemartinez90]

Like the camper!👍

[@TrentMMoore]

Thanks! Stay tuned leak test will be out next week.

[@cway444]

what about the side windows ? do they have a screened slider?

[@TrentMMoore]

Yes side windows are screened in as well. This works great for the dogs or to keep condensation down when sleeping back there.

[@ryanchew9200]

I'm working on the preliminary planning for a build like this in my gen 2 taco, my concern is there's not a ton of room between the platform and the ceiling of my camper shell based off my rough measurements. I'm 6 feet tall 185lbs, not small but not huge either. How has the sleeping space been for you? I've considered going roof top tent, but I'd rather save the money for now and work with what I got.

[@TrentMMoore]

You are about the same size as me ( I am 5’ 11” 175lbs ) and me and my wife sleep in there comfortably. Most of the trips we are sleeping in the truck are about 3-5 days max, so it isn’t bad at all. That being said I have hit my head a few times waking up at night and forgetting where I was or trying to adjust and totally smacked my head. We are looking at getting some sort of standing tent that would attach to the side just to make changing and what not easier but over all for the money I think it is totally worth it. Shoot it is hard to get a good ground tent for the money spent to make this, provided you have the shell.

[@ryanchew9200]

@@TrentMMoore right on man, thanks for the feedback. Looking at doing my build in the next week or two when I get the time. Cheers!

[@TrentMMoore]

Let me know if you have any questions would be happy to help. Thanks for watching!

[@FearTheFlare]

Do you have a long bed or short bed?